Starch composites with aconitic acid

The aim of this project is to examine the effectiveness of using aconitic acid (AcA), a tricarboxylic acid which contains a carbon/carbon double bond (C=C), to enhance the properties of starch-based films. Starch/glycerol cast films were prepared with 0, 2, 5, 10 and 15 wt% AcA (starch wt% basis) and the properties analysed. It was shown that AcA acted as both a cross-linking agent and also a strong plasticising agent. The 5 wt% AcA derived starch films were the most effectively cross-linked having the lowest solubility (28 wt%) and decreased swelling coefficient (35 vol.%) by approximately 3 times and 2.4 times respectively compared to the control film submerged in water (23 °C). There was also a significant increase in the film elongation at break by approximately 35 times (compared to the control) with the addition of 15 wt% AcA, emphasising the plasticising effect of AcA. However, generally there was a reduced tensile strength, softening of the film, and reduced thermal stability with increased amounts of AcA.

Combustion of polystyrene spheres in air

Mass histories of polystyrene spheres (initial diameter 2–5 mm) burning in simulated air have been obtained by quenching combustion after variable times and weighing the residues. The flame positions and temperature histories of the spheres have also been recorded. A simple analytical model — an extension of quasi-steady combustion theory of liquid droplets — is shown to describe the combustion process reasonably well. Though the combustion process is broadly similar to that of liquid spheres, flame diameter is relatively smaller, particle temperature higher, and decomposition reactions occur in the condensed phase.

Phytoplankton ecology of subarctic lakes in Finnish Lapland

Climate is warming and it is especially seen in arctic areas, where the warming trend is expected to be greatest. Arctic freshwater ecosystems, which are a very characteristic feature of the arctic landscape, are especially sensitive to climate change. They could be used as early warning systems, but more information about the ecosystem functioning and responses are needed for proper interpretation of the observations. Phytoplankton species and assemblages could be especially suitable for climate-related studies, since they have short generation times and react rapidly to changes in the environment. In addition, phytoplankton provides a good tool for lake classifications, since different species have different requirements and tolerance ranges for various environmental factors. The use of biological indicators is especially useful in arctic areas, were many of the chemical factors commonly fall under the detection limit and therefore do not provide much information about the environment. This work brings new information about species distribution and dynamics of arctic freshwater phytoplankton in relation to environmental factors. The phytoplankton of lakes in Finnish Lapland and other European high-altitude or high-latitude areas were compared. Most lakes were oligotrophic and dominated by flagellated species belonging to chrysophytes, cryptophytes and dinoflagellates. In Finnish Lapland cryptophytes were of less importance, whereas desmids had high species richness in many of the lakes. In Pan-European scale, geographical and catchment-related factors were explaining most of the differences in species distributions between different districts, whereas lake water chemistry (especially conductivity, SiO2 and pH) was most important regionally. Seasonal and interannual variation of phytoplankton was studied in subarctic Lake Saanajärvi. Characteristic phytoplankton species in this oligotrophic, dimictic lake belonged mainly to chrysophytes and diatoms. The maximum phytoplankton biomass in Lake Saanajärvi occurs during autumn, while spring biomass is very low. During years with heavy snow cover the lake suffers from pH drop caused by melt waters, but the effects of this acid pulse are restricted to surface layers and last for a relatively short period. In addition to some chemical parameters (mainly Ca and nutrients), length of the mixing cycle and physical factors such as lake water temperature and thermal stability of water column had major impact on phytoplankton dynamics. During a year with long and strong thermal stability, the phytoplankton community developed towards an equilibrium state, with heavy dominance of only a few taxa for a longer period of time. During a year with higher windiness and less thermal stability, the species composition was more diverse and species with different functional strategies were able to occur simultaneously. The results of this work indicate that although arctic lakes in general share many common features concerning their catchment and water chemistry, large differences in biological features can be found even in a relatively small area. Most likely the lakes with very different algal flora do not respond in a similar way to differences in the environmental factors, and more information about specific arctic lake types is needed. The results also show considerable year to year differences in phytoplankton species distribution and dynamics, and these changes are most likely linked to climatic factors.

It's not the heat, it's the humidity

The performance aspect of a PhD thesis. In 1976, The Saints released “I’m Stranded” and Brisbane was suddenly on the map. People starting talking about Brisbane bands in the same way they had talked about Liverpool bands or would talk about Seattle bands. The history of the Brisbane music scene has been constructed and interpreted by both journalists (at the time and since) and academics (in retrospect). These histories and analyses have come some way to painting a picture of a time and place that is somewhat mythic. As a significant member of this scene, my memory stores a different picture, different shadings: a vibrant social scene with cultural by-products (music, art, film, fashion). By gathering the ephemera of the time and embellishing with a series of interviews with some Brisbane musicians, I will be growing new, untold stories, grounded in shared experience and understanding. The interview footage, and the bounty of ephemera that continues to be unearthed, will be thrown together in the style of the times and presented in public as a live documentary filled with the faces, voices and music on which these times were built. The performances are the Creative Practice component of the PhD, and are the result of a curatorial process which will be examined in the exegetic component of the thesis due for delivery in mid 2016.

Anomalous reaction-diffusion as a model of nonexponential DNA escape kinetics

We show that data from recent experiments carried out on the kinetics of DNA escape from alpha-hemolysin nanopores [M. Wiggin, C. Tropini, C. T. Cossa, N. N. Jetha, and A. Marziali, Biophys. J. 95, 5317 (2008)] may be rationalized by a model of chain dynamics based on the anomalous diffusion of a particle moving in a harmonic well in the presence of a delta function sink. The experiments of Wiggin found, among other things, that the occasional occurrence of unusually long escape times in the distribution of chain trapping events led to nonexponential decays in the survival probability, S(t), of the DNA molecules within the nanopore. Wiggin ascribed this nonexponentiality to the existence of a distribution of trapping potentials, which they suggested was theresult of stochastic interactions between the bases of the DNA and the amino acids located on the surface of the nanopore. Based on this idea, they showed that the experimentally determined S(t) could be well fit in both the short and long time regimes by a function of the form (1+t/tau)(-alpha) (the so called Becquerel function). In our model, S(t) is found to be given by a Mittag-Leffler function at short times and by a generalized Mittag-Leffler function at long times. By suitable choice of certain parameter values, these functions are found to fit the experimental S(t) even better than the Becquerel function. Anomalous diffusion of DNA within the trap prior to escape over a barrier of fixed height may therefore provide a second, plausible explanation of the data, and may offer fresh perspectives on similar trapping and escape problems.

Ductile deformation of single inclusions in simple shear with a finite-strain hyperelastoviscoplastic rheology

We examine the 2D plane-­strain deformation of initially round, matrix-­bonded, deformable single inclusions in isothermal simple shear using a recently introduced hyperelastoviscoplastic rheology. The broad parameter space spanned by the wide range of effective viscosities, yield stresses, relaxation times, and strain rates encountered in the ductile lithosphere is explored systematically for weak and strong inclusions, the effective viscosity of which varies with respect to the matrix. Most inclusion studies to date focused on elastic or purely viscous rheologies. Comparing our results with linear-­viscous inclusions in a linear-­viscous matrix, we observe significantly different shape evolution of weak and strong inclusions over most of the relevant parameter space. The evolution of inclusion inclination relative to the shear plane is more strongly affected by elastic and plastic contributions to rheology in the case of strong inclusions. In addition, we found that strong inclusions deform in the transient viscoelastic stress regime at high Weissenberg numbers (≥0.01) up to bulk shear strains larger than 3. Studies using the shapes of deformed objects for finite-­strain analysis or viscosity-­ratio estimation should establish carefully which rheology and loading conditions reflect material and deformation properties. We suggest that relatively strong, deformable clasts in shear zones retain stored energy up to fairly high shear strains. Hence, purely viscous models of clast deformation may overlook an important contribution to the energy budget, which may drive dissipation processes within and around natural inclusions.

Lähellä, mutta niin kaukana : Tutkimus naisten muuttoliikkeestä Suomen ja uudelleen itsenäistyneen Viron välillä

Immigration is one of the most topical international issues of our time. Worldwide, the number of immigrants has doubled over the last twenty years, and migration patterns have become so diversified that they now constitute a kind of “chaos”. The number and significance of women as migrants has also increased, which is earning women growing attention among scholars. This study looks at the migration of women, in particular mothers of small children, in both directions between Finland and Estonia, following the latter’s re- independence. The data consists of in-depth interviews conducted in 2005 with 24 Finnish and 24 Estonian immigrant women. The focus was on the women’s expectations and experiences of their new country of residence, acculturation – i.e. adjusting to a new environment, social networks in the country of origin and the new country, and models of motherhood following immigration. The primary research question was formulated as follows: Which factors have influenced the formation of female immigrants’ social ties, thus contributing to the formation of motherhood strategies and afecting internal family dynamics in the new country? The research consists of four previously published independent articles as well as a summary chapter. The study’s findings indicate that Finnish and Estonian women migrated for diferent reasons and at diferent times, and that their migration patterns also difered. Estonian migration occurred mainly in the 1990s, and most immigrants intended to return later to their country of origin. Regardless of the reason for migrating that they gave to immigration officials, other key reasons often included the desire for a more stable living environment and better income. Only four of the Estonian women had immigrated together with an Estonian husband, while two- thirds came because of marriage to a Finnish man. Most of the Finnish women, on the other hand, migrated after 2000 and either came with their family as a result of a spouse’s job transfer, or came by themselves to further their studies. In most cases, the migration was a temporary solution intended to promote one’s own or one’s spouse’s career advancement. Because the reasons for migrating were diferent between Finnish and Estonian women, their expectations of the new country and their status in it were also diferent. In terms of both social and economic standing, the position of Finnish immigrants was categorically better. The reason for migrating had an impact on one’s orientation toward the receiving society. Estonian women and Finns who migrated for marriage or edu cational reasons became immediately active in forming institutional and social ties in the new society. Conversely, the women had migrated because of work had little contact with Estonian society, and their social networks consisted of other Finnish immigrants. Furthermore, they maintained strong institutional and social ties to Finland and therefore felt no need to anchor themselves to Estonian society. The Finnish and Estonian women who were better integrated into the receiving country also maintained strong social ties to their country of origin. Women who became integrated into the receiving country as a result of giving birth to children utilized various services directed at families with children. In part, such services conveyed to the women the conceptions that were prevalent in the surrounding society concerning the treatment of children and the expectations on mothers, both of which difer to some extent in Finland and Estonia. had an impact on strategies of motherhood, internal family dynamics, and gender Regardless of the reason for migrating, or the country of origin, immigration equality. Most Estonian women had to do without the child-care help provided by relatives; before immigrating, some women had even had daily child-care assistance from family members. However, Estonian women who were married to Finns did receive help from the spouse and sometimes also the spouse’s relatives. Conversely, Finnish women who had immigrated because of a spouse’s job transfer were faced with the opposite situation, in which they bore the main responsibility for domestic work and child care. They were, however, in a position to pay for domestic help. Hence, the women who had integrated into a new society had to construct their own perceptions of motherhood by reconciling the motherhood models of both the cause of a spouse’s job transfer found that being a stay-at-home mother challenged previously self-evident behaviors. Receiving country and the country of origin, whereas women who had migrated because of a spouse’s job transfer found that being a stay-at-home mother challenged previously self-evident behaviors.

Modular design of synthetic protein mimics. Crystal structure of two seven-residue helical peptide segments linked by .epsilon.-aminocaproic acid

Two seven-residue helical segments, Val-Ala-Leu-Aib-Val-Ala-Leu, were linked synthetically with an epsilon-aminocaproic acid (Acp) linker with the intention of making a stable antiparallel helix-helix motif. The crystal structure of the linked peptide Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Acp-Val-Ala-Leu-Aib-Val-Ala-Leu-OMe (1) shows the two helices displaced laterally from each other by the linker, but the linker has not folded the molecule into a close-packed antiparallel conformation. Two strong intermolecular NH...O = C hydrogen bonds are formed between the top of the lower helix of one molecule and the bottom of the upper helix in a laterally adjacent molecule to give the appearance of an extended single helix. The composite peptide with Boc and OMe end groups, C76H137N15O18.H2O, crystallize in space group P2(1) with a = 8.802 (1) angstrom, b = 20.409 (4) angstrom, c = 26.315 (3) angstrom, and beta = 90.72 (1)degrees; overall agreement R = 7.86% for 5030 observed reflections (\F(o)\ > 3-sigma(F)); resolution = 0.93 angstrom. Limited evidence for a more compact conformation in solution consistent with an antiparallel helix arrangement is obtained by comparison of the HPLC retention times and CD spectra of peptide 1 with well-characterized continuous helices of similar length and sequence.

Ydinperheen politiikka

The research topic is the formation of nuclear family understanding and the politicization of nuclear family. Thus, the question is how did family historically become understood particularly as nuclear family and why did it become central in terms of politics and social? The research participates in discussions on the concept and phenomena of family. Central theme of analysis is to ask what is family? Family is seen as historically contingent and the discussions on the concept and phenomena are done via historical analysis. Center of attention is nuclear family, thus, a distinction between the concepts of family and nuclear family is made to be able to focus on historically specific phenomena of nuclear family. Family contrary to the concept of nuclear family -- in general is seen to be able to refer to families in all times and all cultures, as well as all types of families in our times and culture. The nuclear family understanding is examined through two separate themes, that of parent-child relationships and marital relations. Two simultaneous processes give nuclear family relations its current form: on the one hand the marital couple as the basis of family is eroding and losing its capacity to hold the family together; on the other, in Finland at least from 1950s on, the normal development of the child has became to be seen ontologically bound to the (biological) mother and (via her to) the father. In the nucleus of the family is the child: the biological, psychological and social processes of normal development are seen ontologically bound to the nuclear family relations. Thus, marriages can collapse, but nuclear family is unbreakable. What is interesting is the historical timing: as nuclear family relations had just been born, the marriage dived to a crisis. The concept and phenomena of nuclear family is analyzed in the context of social and politics (in Finnish these two collapses in the concept of yhteiskunnallinen , which refers both to a society as natural processes as well as to the state in terms of politics). Family is political and social in two senses. First, it is understood as the natural origin of the social and society. Human, by definition, is understood as a social being and the origin of social, in turn, is seen to be in the family. Family is seen as natural to species. Disturbances in family life lead to un-social behaviour. Second, family is also seen as a political actor of rights and obligations: family is obligated to control the life of its members. The state patronage is seen at the same time inevitable family life is way too precious to leave alone -- and problematic as it seems to disturb the natural processes of the family or to erode the autonomy of it. The rigueur of the nuclear family is in the role it seems to hold in the normal development of the child and the future of the society. The disturbances in the families first affect the child, then the society. In terms of possibility to re-think the family the natural and political collide: the nuclear family seems as natural, unchangeable, un- negotiable. Nuclear family is historically ontologised. The biological, psychological and social facts of family seem to be contrary to the idea of negotiation and politics the natural facts of family problematise the politics of family. The research material consists of administrational documents, memoranda, consultation documents, seminar reports, educational writings, guidebooks and newspaper articles in family politics between 1950s and 1990s.

Kulutus, tieto, hallinta : Kulutuksen tilastoinnin muutokset 1900-luvun Suomessa

The aim of the study was to find out how the consumption of the population in Finland became a target of social interest and production of statistical data in the early 20th century, and what efforts have been made to influence consumption with social policy measures at different times. Questions concerning consumption are examined through the practices employed in the compilation of statistics on it. The interpretation framework in the study is Michael Foucault s perspective of modern liberal government. This mode of government is typified by pursuit of efficiency and search of equilibrium between economic government and a government of the processes of life. It shows aspirations towards both integration and individualisation. The government is based on freedom practices. It also implies knowledge-based ways of conceptualising reality. Statistical data are of specific significance in this context. The connection between the government of consumption and the compilation of statistics on it is studied through the theoretical, socio-political and statistical conceptualisation of consumption. The research material consisted of Finnish and international documentation on the compilation of statistics on consumption, publications of social programmes, and reports of studies on consumption. The analysis of the material focused especially on the problematisations related to consumption found in these documents and on changes in them over history. There have been both clearly observable changes and as well as historical stratification and diversity in the rationalities and practices of consumption government during the 20th century. Consumption has been influenced by pluralistic government, based at different times and in varying ways on the logics of solidarity and markets. The difference between these is that in the former risks are prepared for collectively while in the latter risks are individualised. Despite the differences, the characteristic that is common to these logics is certain kind of contractuality. They are both permeated by the household logic which differs from them in that it is based on the normative and ethical demands imposed on an individual. There has been a clear interactive connection between statistical data and consumption government. Statistical practices have followed changes in the way consumption has been conceptualised in society. This has been reflected in the statistical phenomena of interest, concepts, classifications and indicators. New ways of compiling statistics have in their turn shaped perceptions of reality. Statistical data have also facilitated a variety of rational calculations with which the consequences of the population s consumption habits have been evaluated at the levels of economy at large and individuals.

POP-inhibiittorin KYP-2047 vaikutukset angiogeneesiin in vitro

Angiogeneesi on tärkeä ilmiö elimistön fysiologiassa, mutta myös lukuisissa patologisissa tiloissa. Angiogeneesi on monivaiheinen prosessi, joka sisältää angiogeneesiä indusoivia ja sitä inhiboivia tekijöitä tasapainossa keskenään. Useat tutkimukset puoltavat sitä, että tymosiini ȕ4 (Tȕ4) ja tetrapeptidi Ac-SDKP (N-asetyyliseryyli- aspartyyli-lysyyli-proliini) indusoivat angiogeneesiä in vitro ja in vivo. Tutkimukset viittaavat myös siihen, että prolyylioligopeptidaasi (POP) hydrolysoi peptidifragmentin Ac- SDKP Tȕ4:n (43 ah) proliinin jälkeen. POP on laajalti esiintyvä seriiniproteaasi, joka pystyy pilkkomaan vain alle 30 aminohapon oligopeptidejä. Tȕ4:n tulee siksi pilkkoutua ensin jonkin, vielä tuntemattoman peptidaasin johdosta. POP:ia on löydetty eniten aivoista, minkä vuoksi sitä on tutkittu varsinkin muistin ja oppimisen häiriötiloissa sekä neurodegeneratiivisten sairausten yhteydessä. POP:in todellinen fysiologinen merkitys on kuitenkin vielä selvittämättä. Tämän pro gradun kirjallisuusosiossa selvitetään angiogeneesiin liittyvien tekijöiden yhteyksiä sekä kuvataan angiogeenisten Tȕ4:n, Ac-SDKP:n ja POP:in ominaisuuksia, esiintymistä ja toimintaa. Kokeellisen osion tarkoituksena oli osoittaa, osallistuvatko POP ja Tȕ4 tetrapeptidin Ac-SDKP muodostumiseen ja kapillaarimuodostumiseen ja edelleen, voidaanko POPaktiivisuutta, tetrapeptidi- ja kapillaarimuodostumista estää spesifisellä POP-inhibiittorilla, KYP-2047:llä. Kokeellinen osa oli kaksiosainen. Ensimmäisessä osassa tutkittiin POPaktiivisuutta ja suoritettiin Ac-SDKP –pitoisuusmittauksia ajanjaksolla 0-180 min Wistarkannan rotista tehdyillä homogenaateilla. Tutkimusryhminä olivat 0,1 ja 0,5 μM KYP-2047 (+2 μM Tȕ4), 1:20 (0,625 μM) humaaniperäinen rekombinantti-POP (+ 2 μM Tȕ4), 2 μM Tȕ4 (pos. kontrolli) ja raakahomogenaatti (neg. kontrolli). Toisessa osassa tutkittiin kapillaarimuodostumista ajanjaksolla 0-180 min humaaniperäisillä napanuoralaskimon primaariendoteelisoluilla MatrigelTM Matrix -päällystetyllä 48- kuoppalevyllä, jolle oli siirrostettu 50 000 solua/kuoppa. Naudan seerumilla ja antibiooteilla käsitellyt tutkimusryhmät olivat 5 ja 10 μM KYP-2047 (+4 μM Tȕ4), 1:20 (0,625 μM) humaaniperäinen rekombinantti-POP (+4 μM Tȕ4), 4 μM Tȕ4 (pos. kontrolli) ja DMEM (neg. kontrolli). Kuoppia inkuboitiin ja kapillaarimuodostuminen kuvattiin valomikroskoopilla digitaalikameralla. Kutakin tutkimusryhmää pipetoitiin kolmeen rinnakkaiseen kuoppaan ja kokeet toistettiin neljästi. Sulkeutuneiden kapillaarien lukumäärä laskettiin manuaalisesti ja tuloksista tehtiin tilastollinen analyysi. 7ȕ4:n ja POP:in havaittiin molempien osallistuvan tetrapeptidin AC-SDKP muodostumiseen munuaishomogenaateissa. Primaariendoteelisolut muodostivat selkeitä kapillaareja Matrigelilla, erityisesti POP- ja Tȕ4–ryhmissä. KYP-2047 inhiboi tehokkaasti POP:ia kaikissa kokeissa osoittautuen hyväksi antiangiogeeniseksi yhdisteeksi. Angiogeneesin mekanismien ja POP:in, Tȕ4:n ja Ac-SDKP:n yhteyksien selvittäminen vaatii luonnollisesti vielä lisätutkimuksia.

A generalized Linear Programming based approach to optimal divisible load scheduling

In this paper we propose a general Linear Programming (LP) based formulation and solution methodology for obtaining optimal solution to the load distribution problem in divisible load scheduling. We exploit the power of the versatile LP formulation to propose algorithms that yield exact solutions to several very general load distribution problems for which either no solutions or only heuristic solutions were available. We consider both star (single-level tree) networks and linear daisy chain networks, having processors equipped with front-ends, that form the generic models for several important network topologies. We consider arbitrary processing node availability or release times and general models for communication delays and computation time that account for constant overheads such as start up times in communication and computation. The optimality of the LP based algorithms is proved rigorously.

Optical Tweezers for Single Molecule Biology

Molecular machinery on the micro-scale, believed to be the fundamental building blocks of life, involve forces of 1-100 pN and movements of nanometers to micrometers. Micromechanical single-molecule experiments seek to understand the physics of nucleic acids, molecular motors, and other biological systems through direct measurement of forces and displacements. Optical tweezers are a popular choice among several complementary techniques for sensitive force-spectroscopy in the field of single molecule biology. The main objective of this thesis was to design and construct an optical tweezers instrument capable of investigating the physics of molecular motors and mechanisms of protein/nucleic-acid interactions on the single-molecule level. A double-trap optical tweezers instrument incorporating acousto-optic trap-steering, two independent detection channels, and a real-time digital controller was built. A numerical simulation and a theoretical study was performed to assess the signal-to-noise ratio in a constant-force molecular motor stepping experiment. Real-time feedback control of optical tweezers was explored in three studies. Position-clamping was implemented and compared to theoretical models using both proportional and predictive control. A force-clamp was implemented and tested with a DNA-tether in presence of the enzyme lambda exonuclease. The results of the study indicate that the presented models describing signal-to-noise ratio in constant-force experiments and feedback control experiments in optical tweezers agree well with experimental data. The effective trap stiffness can be increased by an order of magnitude using the presented position-clamping method. The force-clamp can be used for constant-force experiments, and the results from a proof-of-principle experiment, in which the enzyme lambda exonuclease converts double-stranded DNA to single-stranded DNA, agree with previous research. The main objective of the thesis was thus achieved. The developed instrument and presented results on feedback control serve as a stepping stone for future contributions to the growing field of single molecule biology.

Outward spherical solidification of a superheated melt with time dependent boundary flux

Short-time analytical solutions of solid and liquid temperatures and freezing front have been obtained for the outward radially symmetric spherical solidification of a superheated melt. Although results are presented here only for time dependent boundary flux, the method of solution can be used for other kinds of boundary conditions also. Later, the analytical solution has been compared with the numerical solution obtained with the help of a finite difference numerical scheme in which the grid points change with the freezing front position. An efficient method of execution of the numerical scheme has been discussed in details. Graphs have been drawn for the total solidification times and temperature distributions in the solid.

An accurate numerical integration scheme for finite rotations using rotation vector parametrization

A numerical integration procedure for rotational motion using a rotation vector parametrization is explored from an engineering perspective by using rudimentary vector analysis. The incremental rotation vector, angular velocity and acceleration correspond to different tangent spaces of the rotation manifold at different times and have a non-vectorial character. We rewrite the equation of motion in terms of vectors lying in the same tangent space, facilitating vector space operations consistent with the underlying geometric structure. While any integration algorithm (that works within a vector space setting) may be used, we presently employ a family of explicit Runge-Kutta algorithms to solve this equation. While this work is primarily motivated out of a need for highly accurate numerical solutions of dissipative rotational systems of engineering interest, we also compare the numerical performance of the present scheme with some of the invariant preserving schemes, namely ALGO-C1, STW, LIEMIDEA] and SUBCYC-M. Numerical results show better local accuracy via the present approach vis-a-vis the preserving algorithms. It is also noted that the preserving algorithms do not simultaneously preserve all constants of motion. We incorporate adaptive time-stepping within the present scheme and this in turn enables still higher accuracy and a `near preservation' of constants of motion over significantly longer intervals. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.