Weather variables, water balance, growth, and agro industrial yield of sugarcane

The objective of this study was to evaluate the meteorological variables, water deficiency, growth, and agro-industrial yield of sugarcane varieties: RB72454, RB863129, RB867515, RB92579, RB93509, RB931003, RB951541, and RB971755, in rainfed crop in two harvests in the Rio Largo-AL region. The meteorological variables were obtained in an automatic station and water balance was done by Thornthwaite & Mather method. During the study period, the air temperature ranged from 16.6 to 35.9 ºC. In the first production cycle rained 1,806 mm and the crop evapotranspiration was 1,775 mm. In the second cycle, the rainfall totaled 1,632 mm and the crop evapotranspiration was 1,290 mm. The average water excess of two production cycles was 689 mm and the water deficit totaled 665 mm. The average agricultural productivity in the plant was 86.8 t ha-1, in the first ratoon was 75.2 t ha-1 and the agro-industrial yield average was 12.9 and 10.9 tons of sugar per hectare in the plant and first ratoon, respectively. The air temperature was not limiting to the growth of sugarcane and the rainfall was higher than the crop evapotranspiration, but due to poor distribution of the rains there was water deficit. The most productive varieties were RB93509, RB92579, and RB863129.

Força requerida para o desprendimento de frutos de tomate industrial em diferentes estádios de maturação

A colheita do tomate destinado ao processamento, atualmente, é feita com colhedoras automotrizes; para isso, são necessários estudos que viabilizem a melhoria destas colhedoras, reduzindo assim perdas no campo. Este trabalho teve como objetivo quantificar a força necessária para o desprendimento do fruto de tomate de seu pedúnculo em diferentes estágios de maturação. O experimento foi realizado na Fazenda Madeira, no Município de Gameleira de Goiás-GO, e no Laboratório de Engenharia Agrícola da Universidade Estadual de Goiás. Nas condições de campo, os frutos foram retirados avaliando-se a força de tração no sentido axial do pedúnculo ao fruto e, em laboratório, nos sentidos axial e transversal. O trabalho foi realizado no delineamento experimental inteiramente casualizado, com fator único, com dez repetições. Os tratamentos foram os estádios de maturação, considerando tomates verdes, tomates pintados e tomates maduros. Os resultados foram submetidos à análise de variância, aplicando-se o teste de F e, quando significativo, o teste de Tukey, a 5% de probabilidade. A força axial média requerida para os desprendimentos foi de 14,69 N, com maior valor para os frutos maduros. Para o esforço transversal, os valores médios foram 0,98; 1,37 e 1,86 N para os frutos verdes, pintados e maduros, respectivamente.

Trauma abdominal penetrante consecutivo à corrente elétrica industrial

The authors present a case report of a victim of high power electric shock. The main electric lesion was a penetrating abdominal wound with loss of substance of the abdominal wall and an electric lesion of the hepatic segment and of the gallbladder. The surgical treatment included hepatic segmentectomy, cholecystectomy, repair of the abdominal wall with Marlex prosthesis and skin graft, besides the debridment of the lesions of extremities. The postoperative evolution was satisfactory and the follow-up for 6 months didn't show any sequelae.

Self-Assessment Report for International Accreditation – Bachelor’s and Master’s degree programmes in Industrial Management

Self-assessment report for accreditation of the Bachelor's and Master's degree programs in Industrial Management.

CREATION OF INTERNATIONALIZATION CAPABILITIES IN FINNISH ENVIRONMENTAL TECHNOLOGY SME’S

The purpose of this study is to identify successful capabilities that Finnish SME’s, in the environmental technology industry, use in their internationalization efforts. It is the goal of this study to create a list of guidelines and capabilities that other SME’s in this industry can use to help be more effective in their internationalization efforts. Through a study of three Finnish SME’s, in the growing environmental technologies sector, several common internationalization capabilities were identified to be helpful in their internationalization process. The common capabilities that were identified were then categorized together to show not only what capabilities were identified but if they came from firm, location or network specific advantages. As a result of the study, three dynamic capabilities were formulated as guidelines. These guidelines are designed so that a SME based in Finland, and in the environmental technology industry, could use them to help them in their own internationalization process.

SOCIAL MEDIA IN INTERNATIONAL BRAND COMMUNICATION OF SMES - A multiple case study of small Finnish design-intensive companies

Social media is a rather new phenomenon which has revolutionised the world of online communication. However, academic research on how companies can benefit from social media is lacking. The research objective of this thesis was to examine the use of social media in international brand communication of small Finnish design-intensive companies. Therefore, this research contributes also to the research gap in SME branding. The focus was on communication targeted at consumers. The research was carried out as a mixed methods research employing the questionnaire and multiple case study methods. The questionnaire was used to gather preliminary information on Finnish design-intensive companies and to provide an eligible list of companies for deeper examination. Then, four case companies were studied in more depth. The empirical evidence of the case companies was mainly gathered through theme interviews. The results of the questionnaire shed light on the internationalisation of small Finnish designintensive companies. On average, the companies had internationalised rather quickly after they had been founded. However, the share of exports was rather low in most of the companies. The results revealed also that social media was already used widely in the exporting companies and the use can be expected to grow in future. The findings of the multiple case study suggest that branding activities in small Finnish designintensive companies are constrained by limited resources and skills. In addition, the branding activities are strongly guided by the vision and values of the entrepreneur(s) rather than extensive marketing research. The brand structure was simple in all case companies and they aimed at having a standardised brand image across markets. However, all case companies had faced a need for some adaptation of their international brand communication. Internationally important brand communication channels were international fairs, the internet, word-of-mouth and social media. Social media offered a cost-effective brand communication channel for the case companies. It was used for various purposes, such as creating brand awareness and affecting how the brand is perceived. The entrepreneurs found the use of social media to be rather easy and the case companies had not faced any major challenges. However, the companies had recognised that communication in social media requires consistency and planning. The planning was rather informal and stayed on a general level. Overall, the utilisation of social media in the case companies was limited by a lack of resources. It seemed to affect especially the follow-up of brand communication in social media which stayed rather superficial.

Post-industrial 2.0 – Social Web as the second coming of the post-industrial society

This study presents a review of theories of the so-called post-industrial society, and proposes that the concept of post-industrial society can be used to understand the recent developments of the World Wide Web, often described as Web 2.0 or social Web. The study combines theories ranging from post-war management science and cultural studies to software development, and tries to build a holistic view of the development of the post-industrial society, and especially the Internet. The discourse on the emergence of a post-industrial society after the World Wars has addressed the ways in which the growing importance of information, and innovations in digital communications technology, are changing our society. It is furthermore deeply connected with the discourse on the postmodern society, which emphasizes cultural fragmentation, intertextuality, and pluralism. The Internet age is characterized by increasing masses of information that are managed through various technologies. While 1990s Internet technologies often used the network as a traditional broadcasting channel with added interactivity, Web 2.0 technologies are specifically designed to utilize the network model by facilitating communication between various services and devices, and analyzing the relationships between users and objects in order to produce intelligent insight. The wide adoption of the Internet, and recently of Internet-enabled mobile devices, is furthermore continuously producing new ways of communicating, consuming, and producing. Applications of the social Web, such as social media or social networking services, are permanently changing our traditional social, cultural, and economic practices. The study first presents an overview of the post-industrial society, the Internet, and the concept of Web 2.0. Then the concept of social Web is described with an analysis of the term social media, the brief histories of the interactive Web and social networking services, and a description of the concept ―long tail‖, used to represent the masses of information available in the Web that do not receive mainstream attention. Finally, methods for retrieving and filtering information, modeling social and cultural relationships, and communicating with customers, are presented.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Strategic alliances as an international entry strategy: Finnish cleantech SMEs and the Indian market

The demand for environmental technologies, also called cleantech, is growing globally but the need is especially high in emerging markets such as India where the rising economy and rapid industrialisation have led to increasing energy needs and environmental degradation. The market is of great potential also for the Finnish cleantech cluster that represents advanced expertise in several fields of environmental technologies. However, most of the Finnish companies in the field are SMEs that face challenges in their internationalisation due to their limited resources. The objective of this study was to estimate, whether strategic alliances could be an efficient entry strategy for Finnish cleantech SMEs entering the Indian market. This was done by studying what are the key factors influencing the international entry mode decision of Finnish cleantech SMEs, what are the major factors affecting the entry of Finnish cleantech SMEs to the Indian market and how do Finnish cleantech SMEs use strategic alliances in their internationalisation process. The study was realised as a qualitative multi-case study through theme interviews of Finnish cleantech SME representatives. The results indicated that Finnish cleantech SMEs prefer to enter international markets through non-equity and collaborative modes of entry. These entry modes are chosen because of the small size and limited resources of companies, but also because they want to protect their innovative technologies from property rights violations. India is an attracting market for Finnish cleantech SMEs mainly because of its size and growth, but insufficient environmental regulation and high import tariffs have hindered entry to the market. Finnish cleantech SMEs commonly use strategic alliances in their internationalisation process but the use is rather one-sided. Most of the formed strategic alliances are low-commitment, international contractual agreement in sales and distribution. Alliance partner selection receives less attention. In the future, providing Finnish cleantech SMEs with international experience and training could help in diversifying the use of strategic alliances and increase their benefits to SME internationalisation.

Complicações locais após a injeção de silicone líquido industrial: série de casos

OBJETIVO: analisar uma série de casos de pacientes submetidos à injeção de silicone líquido industrial de maneira clandestina e por pessoas não habilitadas. MÉTODOS: análise retrospectiva de prontuários de pacientes atendidos no período de setembro de 2003 a dezembro de 2010. Foram avaliados: sexo, idade, local e volume de silicone injetado, tempo decorrido entre a aplicação e as manifestações clínicas, complicações, tratamento e evolução. Definiu-se como precoce as manifestações ocorridas até 30 dias da injeção e manifestações tardias após este período. RESULTADOS: Foram atendidos 12 pacientes, oito eram do sexo masculino, sendo sete transexuais. O volume injetado variou de 5ml a 2000ml, sendo desconhecido em três casos. Os locais mais frequentemente utilizados para injeção foram a região de coxas e glúteos. Oito casos apresentaram manifestações precoces, com quadros de inflamação e/ou infecção. Foi necessária a realização de desbridamento cirúrgico em cinco casos. Três pacientes com histórico de injeção na região mamária foram submetidas à adenomastectomia. Houve um óbito por quadro de choque séptico refratário. CONCLUSÃO: O uso do silicone líquido industrial deve ser totalmente contraindicado como material de preenchimento e modificação do contorno corporal, podendo apresentar graves complicações e até mesmo óbito.

Electrocoagulation in the treatment of industrial waters and wastewaters

Chemical coagulation is commonly used in raw water and wastewater treatment plants for the destabilisation of pollutants so that they can be removed in the subsequent separation processes. The most commonly used coagulation chemicals are aluminium and iron metal salts. Electrocoagulation technology has also been proposed for the treatment of raw waters and wastewaters. With this technology, metal cations are produced on the electrodes via electrolysis and these cations form various hydroxides in the water depending on the water pH. In addition to this main reaction, several side reactions, such as hydrogen bubble formation and the reduction of metals on cathodes, also take place in the cell. In this research, the applications of electrocoagulation were investigated in raw water treatment and wastewater applications. The surface water used in this research contained high concentrations of natural organic matter (NOM). The effect of the main parameters – current density, initial pH, electric charge per volume, temperature and electrolysis cell construction – on NOM removal were investigated. In the wastewater treatment studies, the removal of malodorous sulphides and toxic compounds from the wastewaters and debarking effluents were studied. Also, the main parameters of the treatment, such as initial pH and current density, were investigated. Aluminium electrodes were selected for the raw water treatment, whereas wastewaters and debarking effluent were treated with iron electrodes. According to results of this study, aluminium is more suitable electrode material for electrocoagulation applications because it produces Al(III) species. Metal ions and hydroxides produced by iron electrodes are less effective in the destabilisation of pollutants because iron electrodes produce more soluble and less charged Fe(II) species. However, Fe(II) can be effective in some special applications, such as sulphide removal. The resulting metal concentration is the main parameter affecting destabilisation of pollutants. Current density, treatment time, temperature and electrolysis cell construction affect the dissolution of electrodes and hence also the removal of pollutants. However, it seems that these parameters have minimal significance in the destabilization of the pollutants besides this effect (in the studied range of parameters). Initial pH and final pH have an effect on the dissolution of electrodes, but they also define what aluminium or iron species are formed in the solution and have an effect on the ζ-potential of all charged species in the solution. According to the results of this study, destabilisation mechanisms of pollutants by electrocoagulation and chemical coagulation are similar. Optimum DOC removal and low residual aluminium can be obtained simultaneously with electrocoagulation, which may be a significant benefit of electrocoagulation in surface water treatment compared to chemical coagulation. Surface water treatment with electrocoagulation can produce high quality water, which could be used as potable water or fresh water for industrial applications. In wastewater treatment applications, electrocoagulation can be used to precipitate malodorous sulphides to prevent their release into air. Technology seems to be able to remove some toxic pollutants from wastewater and could be used as pretreatment prior to treatment at a biological wastewater treatment plant. However, a thorough economic and ecological comparison of chemical coagulation and electrocoagulation is recommended, because these methods seem to be similar in pollutant destabilisation mechanisms, metal consumption and removal efficiency in most applications.

Pk-yritysten ja korkeakoulujen (teknologia) T&K&I yhteistyön kehittäminen teollisuuden toimialoilla

The aim of this work is to develop entrepreneurship in university technology side. The means of SMEs is made in collaboration with the research development and innovation projects. At the same time supporting and enabling the growth of SMEs, the internationalization of higher education and increase student’s employability in SMEs. The aim is to create new startup companies with the help of co-operation both SMEs and universities, especially assist companies find the successor generation of change by improving interaction between the parties. The new growth oriented entrepreneurial business creation with help of SMEs will be seen more business supporting and opening more opportunities. Portfolio Entrepreneurship is a form of the company’s growth, even the size of company does not change so much. Portfolio Entrepreneurship is an alternative for entrepreneurs which do have possibilities to expand, but they do like keep it as family business. Variety can be seen in expansion if the SMEs have common interest to do so. Co-made projects, between SMEs and universities, are seen to be significantly affecting the wellbeing of society as a whole, and eve international level. Co-operation is considered to be also affected the quality of learning and teachers’ professional development. higher education supports the change of the supports to innovation when it is done with SMEs. Research material has been collected by interviewing the experts, who have already distinguished themselves in their field. Problem focused interviews as method gave the ways how the university students and SMEs can proceed and promote on industrial sector.

Interaction with industrial customers from a project selling company's perspective

This thesis studied the issue of interaction in industrial buyer-seller relationships. The aim of the thesis was to study the interaction from the seller’s perspective, especially from a project selling company’s perspective. The purpose of the thesis was to offer suggestions for the case company on how to improve interaction. The theoretical part of the study introduced the interaction framework of buyer-seller interaction, and the concept of interaction mechanisms. The focus was on studying the seller’s ways and means to utilize the interaction mechanisms. A case study research was conducted in the empirical part of the study, in which interaction in the case company was observed at a general level and through three different projects. The case company of the study was a project selling company. The case study data was gathered through individual interviews. Content Analysis was used as a research method for analyzing the case study data. Based on the case study findings, the results were drawn. The results indicated what should be done, in order to develop interaction in the case company. Finally, suggestions were provided for the case company on how to improve interaction, and a suggested interaction model was established for the case company. Although the thesis studied the topic from the viewpoint of only one specific company, it also offers outlook for other seller companies to improve their interaction.

Applications of Industrial Statistics

This dissertation examines knowledge and industrial knowledge creation processes. It looks at the way knowledge is created in industrial processes based on data, which is transformed into information and finally into knowledge. In the context of this dissertation the main tool for industrial knowledge creation are different statistical methods. This dissertation strives to define industrial statistics. This is done using an expert opinion survey, which was sent to a number of industrial statisticians. The survey was conducted to create a definition for this field of applied statistics and to demonstrate the wide applicability of statistical methods to industrial problems. In this part of the dissertation, traditional methods of industrial statistics are introduced. As industrial statistics are the main tool for knowledge creation, the basics of statistical decision making and statistical modeling are also included. The widely known Data Information Knowledge Wisdom (DIKW) hierarchy serves as a theoretical background for this dissertation. The way that data is transformed into information, information into knowledge and knowledge finally into wisdom is used as a theoretical frame of reference. Some scholars have, however, criticized the DIKW model. Based on these different perceptions of the knowledge creation process, a new knowledge creation process, based on statistical methods is proposed. In the context of this dissertation, the data is a source of knowledge in industrial processes. Because of this, the mathematical categorization of data into continuous and discrete types is explained. Different methods for gathering data from processes are clarified as well. There are two methods for data gathering in this dissertation: survey methods and measurements. The enclosed publications provide an example of the wide applicability of statistical methods in industry. In these publications data is gathered using surveys and measurements. Enclosed publications have been chosen so that in each publication, different statistical methods are employed in analyzing of data. There are some similarities between the analysis methods used in the publications, but mainly different methods are used. Based on this dissertation the use of statistical methods for industrial knowledge creation is strongly recommended. With statistical methods it is possible to handle large datasets and different types of statistical analysis results can easily be transformed into knowledge.

A Method for reducing throughput-time in industrial electronics

Lyhyet toimitusajat tuovat yrityksille kilpailuetua nopeasti muuttuvassa teollisuusympäristössä. Tämän diplomityön ensisijaisena tavoitteena on löytää kirjallisuuden avulla yrityksen käyttöön soveltuva menetelmä, joka soveltuu systemaattiseen läpimenoaikojen lyhentämiseen. Tärkeää on myös varmistaa valitun menetelmän soveltuvuus kohdeyrityksen ympäristöön. Työn toisena tavoitteena on ymmärtää, että minkälaisella panostuksella yhden päivän läpimenoaika voidaan saavuttaa. Kirjallisuustutkimuksen avulla on valittu tarkoitukseen sopiva toimintamalli. Menetelmä on testattu yhdellä tuotantolinjalla ja saadut tulokset sekä palaute osoittavat, että se näyttäisi soveltuvan kohdeyrityksen käyttöön. Tuotantolinjalle on tehty toimintasuunnitelma yhden päivän toimitusajan saavuttamiseksi vuoden 2013 aikana. Haasteen laajuutta koko kohdeyrityksessä on tutkittu erillisessä ideointisessiossa. Session tulosten perusteella on tehty prioriteettilista, joka antaa käsityksen toimitusajan merkittävän lyhentämisen vaatimuksista. Yleisesti ottaen kysynnän vaihtelun hallinta on suurin haaste, mutta useita ratkaisuvaihtoehtoja tämän hallitsemiseksi on tunnistettu.