1000 resultados para Desenvolvimento dirigido a modelos
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Humanas, Departamento de Geografia, 2015.
Resumo:
Shrimp farming is one of the activities that contribute most to the growth of global aquaculture. However, this business has undergone significant economic losses due to the onset of viral diseases such as Infectious Myonecrosis (IMN). The IMN is already widespread throughout Northeastern Brazil and affects other countries such as Indonesia, Thailand and China. The main symptom of disease is myonecrosis, which consists of necrosis of striated muscles of the abdomen and cephalothorax of shrimp. The IMN is caused by infectious myonecrosis virus (IMNV), a non-enveloped virus which has protrusions along its capsid. The viral genome consists of a single molecule of double-stranded RNA and has two Open Reading Frames (ORFs). The ORF1 encodes the major capsid protein (MCP) and a potential RNA binding protein (RBP). ORF2 encodes a probable RNA-dependent RNA polymerase (RdRp) and classifies IMNV in Totiviridae family. Thus, the objective of this research was study the IMNV complete genome and encoded proteins in order to develop a system differentiate virus isolates based on polymorphisms presence. The phylogenetic relationship among some totivirus was investigated and showed a new group to IMNV within Totiviridae family. Two new genomes were sequenced, analyzed and compared to two other genomes already deposited in GenBank. The new genomes were more similar to each other than those already described. Conserved and variable regions of the genome were identified through similarity graphs and alignments using the four IMNV sequences. This analyze allowed mapping of polymorphic sites and revealed that the most variable region of the genome is in the first half of ORF1, which coincides with the regions that possibly encode the viral protrusion, while the most stable regions of the genome were found in conserved domains of proteins that interact with RNA. Moreover, secondary structures were predicted for all proteins using various softwares and protein structural models were calculated using threading and ab initio modeling approaches. From these analyses was possible to observe that the IMNV proteins have motifs and shapes similar to proteins of other totiviruses and new possible protein functions have been proposed. The genome and proteins study was essential for development of a PCR-based detection system able to discriminate the four IMNV isolates based on the presence of polymorphic sites
Resumo:
Atas das II Jornadas Ensino do Empreendedorismo, realizadas em Coimbra, a 6 setembro 2016
Resumo:
Dissertação de Mestrado apresentada no ISPA – Instituto Universitário para obtenção de grau de Mestre na especialidade de Psicocriminologia
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.
Resumo:
Modelos para simulação do fluxo de água no solo e previsão de produtividade de culturas requerem informações sobre parâmetros das curvas de retenção e condutividade hidráulica do solo. Funções de pedotransferência (PTFs) se constituem numa alternativa para obtenção dessas informações, a partir de dados de textura e estrutura disponíveis em levantamentos de solos. Neste trabalho, foram ajustadas PTFs para os parâmetros do modelo de van Genuchten (vG), utilizando dados de 838 curvas de retenção de diferentes locais do Nordeste. As PTFs apresentaram boa qualidade de ajuste para os parâmetros θr e θs em contraste com a baixa capacidade preditiva para logα e n. Tais resultados sugerem a viabilidade do seu uso em modelos de simulação do balanço hídrico simplificado e para algumas aplicações práticas de irrigação. No entanto, para uso em modelos complexos de fluxo de água é importante avaliar a sensibilidade das variáveis prognósticas (produtividade agrícola, concentração de solutos) a variações nos parâmetros de vG. A alta variabilidade observada tanto nas propriedades morfológicas como nos parâmetros de vG para a região de estudo sugere o agrupamento dos dados em classes texturais ou tipos de solos.
Resumo:
O presente relatório descreve as atividades de estágio desenvolvidas no âmbito do Mestrado em Reabilitação Psicomotora, Ramo de Aprofundamento de Competências Profissionais, da Faculdade de Motricidade Humana, realizado na Associação Portuguesa para as Perturbações do Desenvolvimento e Autismo (APPDA) - Lisboa, justamente no Centro de Atividades Ocupacionais (CAO) com 47 jovens e adultos e no Centro de Recursos para a Inclusão (CRI) com 21 crianças e jovens, alunos de seis escolas do ensino regular, integrados em Unidades de Ensino Estruturado para o Autismo (UEEA). O estágio profissionalizante desenrolou-se mediante sessões de intervenção psicomotora em ginásio e meio aquático, em contexto de grupo ou individual acompanhando crianças, jovens e adultos com Perturbações do Desenvolvimento e da Aprendizagem, com maior incidência com Perturbações do Espectro do Autismo. O relatório apresenta o enquadramento teórico, legal e institucional e realização da prática profissional, sendo descritos cinco estudos de caso, enquanto modelos exemplificativos do trabalho desenvolvido, adicionando-se uma reflexão acerca da experiência de estágio. Para cada estudo-caso encontra-se descrito o processo de avaliação, estabelecimento de objetivos, programa pedagógico-terapêutico, resultados e respetiva análise. Da referida intervenção foi possível constatar melhorias, tanto a nível psicomotor como emocional e comportamental, sugerindo os benefícios do contributo da intervenção psicomotora nas Perturbações do Desenvolvimento e Aprendizagem.
Resumo:
Dissertação de Mestrado, Engenharia Informática, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014
Resumo:
Dissertação de Mestrado, Engenharia Elétrica e Eletrónica, Instituto Superior de Engenharia, Universidade do Algarve, 2014
Resumo:
Dissertação de Mestrado, Biologia Molecular e Microbiana, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015
Resumo:
Dissertação de Mestrado, Gestão Empresarial, Faculdade de Economia, Universidade do Algarve, 2015
Resumo:
Este artigo centra-se no desenvolvimento teórico de um modelo integrado para a avaliação e a melhoria da qualidade dos serviços de Internet Banking (IB). Após uma revisão da literatura e uma análise crítica dos estudos já elaborados sobre o uso integrado dos modelos de Kano, SERVQUAL e Quality Function Deployment (QFD), propõe-se um modelo integrado significativamente distinto daquele que tem vindo a ser utilizado na literatura. O modelo que se apresenta visa superar as desvantagens inerentes ao modelo integrador existente, contribuindo para um melhor entendimento da “voz do cliente” e para uma melhoria da qualidade dos serviços de IB. O artigo propõe também um conjunto de proposições para investigação empírica futura. Abstract This article focuses on the theoretical development of an integrated model for the assessment and improvement of the quality of Internet Banking (IB) services. Based on a literature review and critical analysis of the studies on the integrated use of the Kano model, the SERVQUAL and the Quality Function Deployment (QFD), this paper suggests an integrated model that is significantly distinct from those in the extant literature. The suggested model aims to surpass inherent disadvantages of the models in the literature, to contribute to a better understanding of the “voice of the customer” and to improve the quality of the IB services. This paper also develops several propositions for future empirical investigation.
Resumo:
The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir
Resumo:
In the present study we elaborated algorithms by using concepts from percolation theory which analyze the connectivity conditions in geological models of petroleum reservoirs. From the petrophysical parameters such as permeability, porosity, transmittivity and others, which may be generated by any statistical process, it is possible to determine the portion of the model with more connected cells, what the interconnected wells are, and the critical path between injector and source wells. This allows to classify the reservoir according to the modeled petrophysical parameters. This also make it possible to determine the percentage of the reservoir to which each well is connected. Generally, the connected regions and the respective minima and/or maxima in the occurrence of the petrophysical parameters studied constitute a good manner to characterize a reservoir volumetrically. Therefore, the algorithms allow to optimize the positioning of wells, offering a preview of the general conditions of the given model s connectivity. The intent is not to evaluate geological models, but to show how to interpret the deposits, how their petrophysical characteristics are spatially distributed, and how the connections between the several parts of the system are resolved, showing their critical paths and backbones. The execution of these algorithms allows us to know the properties of the model s connectivity before the work on reservoir flux simulation is started
Resumo:
The objective of the thermal recovery is to heat the resevoir and the oil in it to increase its recovery. In the Potiguar river basin there are located several heavy oil reservoirs whose primary recovery energy provides us with a little oil flow, which makes these reservoirs great candidates for application of a method of recovery advanced of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and mobility improved towards the producing wells. Another possible mechanism of displacement of oil in reservoirs subjected to continuous injection of steam is the distillation of oil by steam, which at high temperatures; their lighter fractions can be vaporized by changing the composition of the oil produced, of the oil residual or to shatter in the amount of oil produced. In this context, this paper aims to study the influence of compositional models in the continuous injection of steam through in the analysis of some parameters such as flow injection steam and temperature of injection. Were made various leading comparative analysis taking the various models of fluid, varying from a good elementary, with 03 pseudocomponents to a modeling of fluids with increasing numbers of pseudocomponents. A commercial numerical simulator was used for the study from a homogeneous reservoir model with similar features to those found in northeastern Brazil. Some conclusions as the increasing of the simulation time with increasing number of pseudocomponents, the significant influence of flow injection on cumulative production of oil and little influence of the number of pseudocomponents in the flows and cumulative production of oil were found