978 resultados para methyl internal-rotation
Resumo:
The overall aim of the work presented was to evaluate soil health management with a specific focus on soil borne diseases of peas. For that purpose field experiments were carried out from 2009 until 2013 to assess crop performance and pathogen occurrence in the rotation winter pea-maize-winter wheat and if the application of composts can improve system performance. The winter peas were left untreated or inoculated with Phoma medicaginis, in the presence or absence of yard waste compost at rate of 5 t dry matter ha-1. A second application of compost was made to the winter wheat. Fusarium ssp. were isolated and identified from the roots of all three crops and the Ascochyta complex pathogens on peas. Bioassays were conducted under controlled conditions to assess susceptibility of two peas to Fusarium avenaceum, F. solani, P. medicaginis and Didymella pinodes and of nine plant species to F. avenaceum. Also, effects of compost applications and temperature on pea diseases were assessed. Application of composts overall stabilized crop performance but it did not lead to significant yield increases nor did it affect pathogen composition and occurrence. Phoma medicaginis was dominating the pathogen complex on peas. F. graminearum, F. culmorum, F. proliferatum, Microdochium nivale, F. crookwellense, F. sambucinum, F. oxysporum, F. avenaceum and F. equiseti were frequently isolated species from maize and winter wheat with no obvious influence of the pre-crop on the Fusarium species composition. The spring pea Santana was considerably more susceptible to the pathogens tested than the winter pea EFB33 in both sterile sand and non-sterilized field soil. F. avenaceum was the most aggressive pathogen, followed by P. medicaginis, D. pinodes, and F. solani. Aggressiveness of all pathogens was greatly reduced in non-sterile field soil. F. avenaceum caused severe symptoms on roots of all nine plant species tested. Especially susceptible were Trifolium repens, T. subterraneum, Brassica juncea and Sinapis alba in addition to peas. Reduction of growing temperatures from 19/16°C day/night to 16/12°C and 13/10°C did not affect the efficacy of compost. It reduced plant growth and slightly increased disease on EFB33 whereas the highest disease severity on Santana was observed at the highest temperature, 19/16°C. Application of 20% v/v of compost reduced disease on peas due to all four pathogens depending on pea variety, pathogen and growing media used. Suppression was also achieved with lower application rate of 3.5% v/v. Tests with γ sterilized compost suggest that the suppression of disease caused by Fusarium spp. is biological in origin, whereas chemical and physical properties of compost are playing an additional role in the suppression of disease caused by D. pinodes and P. medicaginis.
Resumo:
In composite agricultural materials such as grass, tee, medicinal plants; leaves and stems have a different drying time. By this behavior, after leaving the dryer, the stems may have greater moisture content than desired, while the leaves one minor, which can cause either the appearance of fungi or the collapse of the over-dried material. Taking into account that a lot of grass is dehydrated in forced air dryers, especially rotary drum dryers, this research was developed in order to establish conditions enabling to make a separation of the components during the drying process in order to provide a homogeneous product at the end. For this, a rotary dryer consisting of three concentric cylinders and a circular sieve aligned with the more internal cylinder was proposed; so that, once material enters into the dryer in the area of the inner cylinder, stems pass through sieve to the middle and then continue towards the external cylinder, while the leaves continue by the inner cylinder. For this project, a mixture of Ryegrass and White Clover was used. The characteristics of the components of a mixture were: Drying Rate in thin layer and in rotation, Bulk density, Projected Area, Terminal velocity, weight/Area Ratio, Flux through Rotary sieve. Three drying temperatures; 40°C, 60° C and 80° C, and three rotation speeds; 10 rpm, 20 rpm and 40 rpm were evaluated. It was found that the differences in drying time are the less at 80 °C when the dryer rotates at 40 rpm. Above this speed, the material adheres to the walls of the dryer or sieve and does not flow. According to the measurements of terminal velocity of stems and leaves of the components of the mixture, the speed of the air should be less than 1.5 m s-1 in the inner drum for the leaves and less than 4.5 m s-1 in middle and outer drums for stems, in such way that only the rotational movement of the dryer moves the material and achieves a greater residence time. In other hand, the best rotary sieve separation efficiencies were achieved when the material is dry, but the results are good in all the moisture contents. The best rotary speed of sieve is within the critical rotational speed, i.e. 20 rpm. However, the rotational speed of the dryer, including the sieve in line with the inner cylinder should be 10 rpm or less in order to achieve the greatest residence times of the material inside the dryer and the best agitation through the use of lifting flights. With a finite element analysis of a dryer prototype, using an air flow allowing speeds of air already stated, I was found that the best performance occurs when, through a cover, air enters the dryer front of the Middle cylinder and when the inner cylinder is formed in its entirety through a sieve. This way, air flows in almost equal amounts by both the middle and external cylinders, while part of the air in the Middle cylinder passes through the sieve towards the inner cylinder. With this, leaves do not adhere to the sieve and flow along drier, thanks to the rotating movement of the drums and the showering caused by the lifting flights. In these conditions, the differences in drying time are reduced to 60 minutes, but the residence time is higher for the stems than for leaves, therefore the components of the mixture of grass run out of the dryer with the same desired moisture content.
Resumo:
In this report, a face recognition system that is capable of detecting and recognizing frontal and rotated faces was developed. Two face recognition methods focusing on the aspect of pose invariance are presented and evaluated - the whole face approach and the component-based approach. The main challenge of this project is to develop a system that is able to identify faces under different viewing angles in realtime. The development of such a system will enhance the capability and robustness of current face recognition technology. The whole-face approach recognizes faces by classifying a single feature vector consisting of the gray values of the whole face image. The component-based approach first locates the facial components and extracts them. These components are normalized and combined into a single feature vector for classification. The Support Vector Machine (SVM) is used as the classifier for both approaches. Extensive tests with respect to the robustness against pose changes are performed on a database that includes faces rotated up to about 40 degrees in depth. The component-based approach clearly outperforms the whole-face approach on all tests. Although this approach isproven to be more reliable, it is still too slow for real-time applications. That is the reason why a real-time face recognition system using the whole-face approach is implemented to recognize people in color video sequences.
Resumo:
This paper presents an image-based rendering system using algebraic relations between different views of an object. The system uses pictures of an object taken from known positions. Given three such images it can generate "virtual'' ones as the object would look from any position near the ones that the two input images were taken from. The extrapolation from the example images can be up to about 60 degrees of rotation. The system is based on the trilinear constraints that bind any three view so fan object. As a side result, we propose two new methods for camera calibration. We developed and used one of them. We implemented the system and tested it on real images of objects and faces. We also show experimentally that even when only two images taken from unknown positions are given, the system can be used to render the object from other view points as long as we have a good estimate of the internal parameters of the camera used and we are able to find good correspondence between the example images. In addition, we present the relation between these algebraic constraints and a factorization method for shape and motion estimation. As a result we propose a method for motion estimation in the special case of orthographic projection.
Resumo:
The central challenge in face recognition lies in understanding the role different facial features play in our judgments of identity. Notable in this regard are the relative contributions of the internal (eyes, nose and mouth) and external (hair and jaw-line) features. Past studies that have investigated this issue have typically used high-resolution images or good-quality line drawings as facial stimuli. The results obtained are therefore most relevant for understanding the identification of faces at close range. However, given that real-world viewing conditions are rarely optimal, it is also important to know how image degradations, such as loss of resolution caused by large viewing distances, influence our ability to use internal and external features. Here, we report experiments designed to address this issue. Our data characterize how the relative contributions of internal and external features change as a function of image resolution. While we replicated results of previous studies that have shown internal features of familiar faces to be more useful for recognition than external features at high resolution, we found that the two feature sets reverse in importance as resolution decreases. These results suggest that the visual system uses a highly non-linear cue-fusion strategy in combining internal and external features along the dimension of image resolution and that the configural cues that relate the two feature sets play an important role in judgments of facial identity.
Resumo:
Local descriptors are increasingly used for the task of object recognition because of their perceived robustness with respect to occlusions and to global geometrical deformations. Such a descriptor--based on a set of oriented Gaussian derivative filters-- is used in our recognition system. We report here an evaluation of several techniques for orientation estimation to achieve rotation invariance of the descriptor. We also describe feature selection based on a single training image. Virtual images are generated by rotating and rescaling the image and robust features are selected. The results confirm robust performance in cluttered scenes, in the presence of partial occlusions, and when the object is embedded in different backgrounds.
Resumo:
Pocos estudios han evaluado el tratamiento de las fracturas desplazadas de cuello femoral en pacientes menores de 65 años de edad, y no han sido claramente definidos los factores de riesgo para necrosis avascular o no-unión dentro de este rango de edad. Para determinar los factores asociados a la necrosis avascular de la cabeza femoral (AVN) y no-unión en pacientes menores de 65 años de edad con fracturas desplazadas del cuello femoral tratados con reducción y fijación interna, se realizó un estudio retrospectivo de 29 fracturas desplazadas del cuello femoral en 29 pacientes consecutivos tratados en una sola institución. La influencia de la edad, la energía del trauma, tipo de reducción, y el tiempo entre la fractura y el tratamiento en desarrollo de la AVN y no-unión fueron evaluados. Los pacientes que desarrollaron NAV fueron significativamente mayores y sufrieron un trauma de más baja energía que en los casos sin AVN. Ninguna variable fue asociada con la no-unión. La regresión logística determinó que sólo la edad se asoció de forma independiente a NAV. La edad es un buen predictor para el desarrollo de NAV, con un C-estadístico de 0.861, y un mejor corte-determinado en 53,5 años. Conclusión: Los pacientes de entre 53,5 y 65 años presentan un riesgo más alto de NAV. La artroplastia primaria se debe considerar en este subgrupo.
Resumo:
In methyl 4-(5-amino-3-phenyl-1H-pyrazol-1-yl)-3-nitrobenzoate, C17H14N4O4, the molecules are linked into complex sheets by a combination of N-H center dot center dot center dot N, N-H center dot center dot center dot O and C - H center dot center dot center dot O hydrogen bonds. In the isomeric methyl 3-nitro-4-[(5-phenyl- 1H-pyrazol-3-yl)amino] benzoate, molecules exhibit a polarized molecular-electronic structure and are linked into chains of edge-fused rings by a combination of N-H center dot center dot center dot O and C - H center dot center dot center dot O hydrogen bonds.
Resumo:
El artículo analiza el fenómeno del desplazamiento forzado alrededor del mundo, así como la génesis del mandato de las Naciones Unidas para luchar contra este problema. Examina las conclusiones clave del estudio de la ONU que encontró que las normas existentes del derecho internacional tienen varios vacíos y zonas grises relativos a las necesidades de los desplazados internos. También analiza los orígenes y el contenido de los principios guía del desplazamiento interno, así como el estatus normativo de los mismos. Así mismo, sugiere que, a pesar de no ser vinculante para los Estados, estos principios guía se convirtieron en la expresión más autorizada de los estándares mínimos aplicables a los desplazados internos como consecuencia de la práctica estatal, es decir, que la mayoría de estos principios se volverán costumbre internacional. El artículo también señala la necesidad de que haya una implementación efectiva en el derecho interno de estos principios guía; examina cómo las autoridades gubernamentales, la Corte Constitucional y la sociedad civil en Colombia, así como las entidades intergubernamentales, respondieron a la crisis del desplazamiento interno en el país. Observando el marco legal colombiano en desplazamiento interno, el artículo concluye que el Estado no ha tomado las medidas necesarias requeridas para prevenir futuros desplazamientos o para asegurar una protección y asistencia efectivas para resolver las necesidades de los desplazados internos.
Resumo:
Introducción: La atención de calidad en urgencias sólo es posible si los médicos han recibido una enseñanza de alta calidad. La escala PHEEM (Postgraduate Hospital Educational Environment Measure) es un instrumento válido y fiable, utilizado internacionalmente para medir el entorno educativo, en la formación médica de posgrado. Materiales y métodos: Estudio de corte trasversal que utilizó la escala PHEEM versión en español para conocer el entorno educativo de los programas de urgencias. El coeficiente alfa de Cronbach se calculó para determinar la consistencia interna. Se aplicó estadística descriptiva a nivel global, por categorías e ítems de la escala PHEEM y se compararon resultados por sexo, año de residencia y programa. Resultados: 94 (94%) residentes llenaron el cuestionario. La puntuación media de la escala PHEEM fue 93,91 ± 23,71 (58,1% de la puntuación máxima) que se considera un ambiente educativo más positivo que negativo, pero con margen de mejora. Hubo una diferencia estadísticamente significativa en la percepción del ambiente educativo entre los programas de residencia (p =0,01). El instrumento es altamente confiable (alfa de Cronbach = 0,952). La barrera más frecuente en la enseñanza fue el hacinamiento y la evaluación fue percibida con el propósito de cumplir normas. Discusión: Los resultados de este estudio aportaron evidencia sobre la validez interna de la escala PHEEM en el contexto colombiano. Este estudio demostró cómo la medición del ambiente educativo en una especialidad médico-quirúrgica, con el uso de una herramienta cuantitativa, puede proporcionar información en relación a las fortalezas y debilidades de los programas.
Resumo:
In order to present an estimation of the Internal Rate of Return (IRR) to higher education in Colombia we take advantage of the methodological approach provided by Heckman, Lochner and Todd (2005). Trying to overcome the criticism that surrounds interpretations of the education coefficient of Mincer equations as being the rate of return to investments in education we develop a more structured approach of estimation, which controls for selection bias, includes more accurate measures of labor income and the role of education costs and income taxes. Our results implied a lower rate of return than the ones found in the Colombian literature and show that the Internal Rate of Return for higher education in Colombia lies somewhere between 0.074 and 0.128. The results vary according to the year analyzed and individual’s gender. This last result reinforces considerations regarding gender discrimination in the Colombian labor market.
Resumo:
Objetivos. El Objetivo general de este estudio es determinar si el Instrumento para evaluar las Fallas Cognitivas Ocupacionales (Occupational Cognitive Failures Questionnaire - OCFQ) desarrollado por Allahyari T. et al. (2011) , tiene validez transcultural y podría ser un Instrumento fiable y válido que se puede adaptar al contexto cultural Colombiano para la valoración de las Fallas Cognitivas en el ámbito laboral. Metodología. Se llevó a cabo la traducción, adaptación y validación del Cuestionario de Fallas Cognitivas Ocupacionales (OCFQ) al contexto cultural colombiano, siguiendo las recomendaciones de la Organización Mundial de la Salud (OMS) para el proceso de traducción y adaptación de instrumentos y posteriormente la evaluación de fiabilidad y validez del instrumento adaptado, en cuatro etapas: Etapa 1. Traducción - retro traducción, Etapa 2. “Debriefing” y Análisis de legibilidad, Etapa 3. Validez de contenido, usando el Índice de Validez de Contenido (CVI) y Etapa 4. Evaluación de propiedades métricas. Para la evaluación de Validez de Constructo se aplicó el Análisis Factorial por el Método de Componentes Principales y Rotación Varimax; la consistencia interna y la estabilidad temporal fueron evaluados mediante el Alpha de Cronbach (α) y el test-retest, respectivamente. Resultados. El Cuestionario OCFQ fue adaptado al contexto cultural Colombiano; el análisis de Legibilidad determinó que de acuerdo con el Grado en la escala Inflesz, el Cuestionario es Bastante Fácil de leer. Partiendo de la versión original de 30 ítems se obtuvo una nueva versión de 25 ítems, ya que después de la evaluación de Validez de Contenido se rechazaron 5 ítems. El Índice de Validez de Contenido (CVI) para la versión final del OCFQ adaptado es aceptable (CVI=0,84). Los resultados de las pruebas métricas muestran que la versión final del OCFQ adaptado tiene una buena Consistencia Interna (α=0.90) y el Índice de Correlación Interclases (ICC) fue de 0.91 mostrando una muy buena Estabilidad Temporal. El Análisis Factorial estableció para el Cuestionario OCFQ 4 factores que explican el 47% de la varianza total. Conclusión. La evaluación de las Fallas Cognitivas en el ámbito laboral requiere que se disponga de una herramienta válida y fiable. De acuerdo con los resultados en este estudio se puede establecer que el OCFQ adaptado al Contexto Cultural Colombiano podría ser un instrumento adecuado para medir las Fallas Cognitivas en el ámbito laboral en plantas industriales.
Resultados tratamiento de las fracturas intertrocantéricas en el Hospital Universitario Mayor MEREDÍ
Resumo:
Las fracturas intertrocantericas son una importante causa de la morbimortalidad en los adultos mayores. Requieren la mayoria manejo quirurgico. No se ha logrado definir si es mejor el tratamiento con osteosintesis o artoplastia de cadera. Por esta razon decidimos realizar un estudio identificando los resultados en cada uno de los tratamientos con poblacion colombiana en el Hospital Universitario Mayor Mederi. Metodos: Estudio de serie de casos. Se analizó una cohorte retrospectiva de pacientes mayores de 59 años con fractura intertrocantérica en el Hospital Universitario Mayor Méderi. Resultados: Se reportaron un total de 179 pacientes con diagnóstico de fractura intertrocantérica. De los cuales se realizaron 100 osteosíntesis , 20 reemplazos totales de cadera y 59 hemiartroplastias. La mortalidad fueron 11 pacientes que corresponde al 6.1%, 3 fueron hombres y 8 mujeres, en cuanto al procedimiento realizado a 7 pacientes se les realizo osteosíntesis y a los 4 restantes se les realizo hemiartroplastia. En total 7 infecciones las cuales se presentaron respectivamente en 6 osteosíntesis y 1 hemiartroplastia. Discusión: La mortalidad fue mayor en la osteosíntesis con 7 pacientes que equivale al 63,6 % de la mortalidad total del estudio. Los porcentajes de infección postoperatoria fueron mayores en la osteosíntesis , encontrándose que del total de pacientes intervenidos 3,9% se infectaron y de estos el 85,7 % corresponden a osteosíntesis versus 14,3% de hemiartroplastia. El sangrado postoperatorio fue mayor a 500 cc en un 39% de las osteosíntesis y en un 44% en las hemiartroplastias. Conclusión: el tratamiento de las fracturas intertrocantéricas tuvo menor mortalidad y menor porcentaje de infección cuando los pacientes fueron tratados con hemiartroplastia y reemplazo total de cadera.
Resumo:
Resumen tomado de la publicación
Resumo:
Resumen tomado de la publicaci??n