Integrable evolution equations in time-dependent domains

We discuss the implementation of a method of solving initial boundary value problems in the case of integrable evolution equations in a time-dependent domain. This method is applied to a dispersive linear evolution equation with spatial derivatives of arbitrary order and to the defocusing nonlinear Schrödinger equation, in the domain l(t)

Disparity with respect to a local reference plane as a dominant cue for stereoscopic depth relief

Earlier studies showed that the disparity with respect to other visible points could not explain stereoacuity performance, nor could various spatial derivatives of disparity [Glennerster, A., McKee, S. P., & Birch, M. D. (2002). Evidence of surface-based processing of binocular disparity. Current Biology, 12:825-828; Petrov, Y., & Glennerster, A. (2004). The role of the local reference in stereoscopic detection of depth relief. Vision Research, 44:367-376.] Two possible cues remain: (i) local changes in disparity gradient or (ii) disparity with respect to an interpolated line drawn through the reference points. Here, we aimed to distinguish between these two cues. Subjects judged.. in a two AFC paradigm, whether a target dot was in front of a plane defined by three reference dots or, in other experiments, in front of a line defined by two reference dots. We tested different slants of the reference line or plane and different locations of the target relative to the reference points. For slanted reference lines or plane, stereoacuity changed little as the target position was varied. For judgments relative to a frontoparallel reference line, stereoacuity did vary with target position, but less than would be predicted by disparity gradient change. This provides evidence that disparity with respect to the reference plane is an important cue. We discuss the potential advantages of this measure in generating a representation of surface relief that is invariant to viewpoint transformations. (c) 2006 Elsevier Ltd. All rights reserved.

Two-point boundary value problems for linear evolution equations

We study boundary value problems for a linear evolution equation with spatial derivatives of arbitrary order, on the domain 0 < x < L, 0 < t < T, with L and T positive nite constants. We present a general method for identifying well-posed problems, as well as for constructing an explicit representation of the solution of such problems. This representation has explicit x and t dependence, and it consists of an integral in the k-complex plane and of a discrete sum. As illustrative examples we solve some two-point boundary value problems for the equations iqt + qxx = 0 and qt + qxxx = 0.

Duality, observability, and controllability for linear time-varying descriptor systems

A characterization of observability for linear time-varying descriptor systemsE(t)x(t)+F(t)x(t)=B(t)u(t), y(t)=C(t)x(t) was recently developed. NeitherE norC were required to have constant rank. This paper defines a dual system, and a type of controllability so that observability of the original system is equivalent to controllability of the dual system. Criteria for observability and controllability are given in terms of arrays of derivatives of the original coefficients. In addition, the duality results of this paper lead to an improvement on a previous fundamental structure result for solvable systems of the formE(t)x(t)+F(t)x(t)=f(tt).

A self-assembling fluorescent dipeptide conjugate for cell labelling

Derivatives of fluorophore FITC (fluorescein isothiocyanate) are widely used in bioassays to label proteins and cells. An N-terminal leucine dipeptide is attached to FITC, and we show that this simple conjugate molecule is cytocompatible and is uptaken by cells (human dermal and corneal fibroblasts) in contrast to FITC itself. Co-localisation shows that FITC-LL segregates in peri-nuclear and intracellular vesicle regions. Above a critical aggregation concentration, the conjugate is shown to self-assemble into beta-sheet nanostructures comprising molecular bilayers.

Self-dual hopfions

We construct static and time-dependent exact soliton solutions with nontrivial Hopf topological charge for a field theory in 3 + 1 dimensions with the target space being the two dimensional sphere S(2). The model considered is a reduction of the so-called extended Skyrme-Faddeev theory by the removal of the quadratic term in derivatives of the fields. The solutions are constructed using an ansatz based on the conformal and target space symmetries. The solutions are said self-dual because they solve first order differential equations which together with some conditions on the coupling constants, imply the second order equations of motion. The solutions belong to a sub-sector of the theory with an infinite number of local conserved currents. The equation for the profile function of the ansatz corresponds to the Bogomolny equation for the sine-Gordon model.

Ecoeficiência na indústria de petróleo: o estudo do craqueamento catalítico na Petrobrás

The concern with the environment is not a recent phenomenon, however, during some time the quarrel over ambient elements did not succeed to reach similar importance as subjects like productivity and quality. The diagnosis of ambient problems with serious consequences in the whole world contributed to renew the concern with the environment and the ambient element acquired high importance in daily activities and in the activities of manufacture and commerce. During many years the ambient politics and regulations were seen as limits to the production or expansion of the productive activities. In the present work we developed a study which demonstrates, in fact this picture is not real. Therefore it is possible to act in efficient considering ambient and economics. A concept that searchs to add efficiency in operations, productiveness and economics to the respect with the environment is the ecoefficiency. In the present work a study of case in the area of ecoefficiency was developed and presents some innovations developed and adopted in the oil industry that had contributed for the company to reach greater efficiency using natural resources, with lesser losses and greater production of demanded derivatives of oil and thus contributing for higher productive, economic and ambient efficiency.

Influência de parâmetros moleculares em funções de correlação temporal na dinâmica de solvatação mecânica

No presente trabalho descrevemos nossos resultados relativos à investigação da dinâmica de solvatação mecânica por meio de simulações por dinâmica molecular, respeitando o regime da resposta linear, em sistemas-modelo de argônio líquido com um soluto monoatômico ou diatômico dissolvido. Estudamos sistematicamente a influência dos parâmetros moleculares dos solutos (tamanho, polarizabilidade) e da densidade frente a vários modelos de solvatação. Funções de Correlação Temporal da Energia de Solvatação foram calculadas com relação à correlações de n-corpos (n = 2; 3) distinguindo interações repulsivas e atrativas para ambos os sistemas líquidos. Também obtivemos segundas derivadas temporais dessas funções referindo-se à parcelas translacionais, rotacionais e roto-translacionais na solução do diatômico. Encontramos que funções de correlação temporal coletivas podem ser razoavelmente bem aproximadas por correlações binárias a densidades baixas e, a densidades altas, correlações ternárias tornam-se mais importantes produzindo um descorrelacionamento mais rápido das funções coletivas devido a efeitos de cancelamento parciais. As funções de correlação para interações repulsivas e atrativas exibem comportamentos dinâmicos independentes do modelo de solvatação devido a fatores de escalonamento linear que afetam apenas as amplitudes das dessas funções de correlação temporal. Em geral, os sistemas com grau de liberdade rotacional apresentam tempos de correlação mais curtos para a dinâmica coletiva e tempos de correlação mais longos para as funções binárias e ternárias. Finalmente, esse estudo mostra que os sistemas contendo o diatômico relaxam-se predominantemente por mecanismos translacionais binários em modelos de solvatação envolvendo alterações apenas na polarizabilidade do soluto, e por mecanismos rotacionais atrativos binários em modelos envolvendo alterações no comprimento de ligação.

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Avaliação de efeitos biológicos de antiinflamatórios derivados do ácido propiônico através de modelos experimentais em nível molecular e celular

Derivatives of propionic acid NSAIDs are irreversible inhibitors of cyclooxygenase enzyme widely used. The aim of this study was to evaluate, through different experimental models, biological effects of derivatives of propionic acid (fenoprofen, naproxen, ibuprofen and ketoprofen) in cellular and molecular level. The labeling of blood constituents with technetium-99m (99mTc) and morphological analysis of erythrocytes of blood of rats, as well as growth, survival of cultures of Escherichia coli (E. coli) and the assessment of bacterial plasmid electrophoretic profiles were models used for experimental evaluation of possible biological effects of antiinflammatory drugs. The results show that, in general, anti-inflammatory drugs evaluated were not able to alter the labeling of blood constituents with 99mTc, the morphology of red blood cells from blood of rats, as well as the growth of cultures of E. coli and the electrophoretic profile of plasmid DNA. However, naproxen appears to cytotoxic effect on bacterial cultures, plasmids and genotoxic effects in reducing the action of stannous chloride in cultures of E. coli. The use of experimental fast performance and low cost was important for assessment of biological effects, contributing to a better understanding of the properties of propionic acid derivatives studied. anti-inflammatory, blood constituents, technetium-99m, stannous chloride, Escherichia coli; DNA

Licenciamento ambiental em postos de revenda de combustíveis à luz dos princípios constitucionais de defesas do meio ambiente: o caso do município de Natal/RN

This study approaches the question of the administrative procedure of the environmental licensing of ranks of fuel resale, taking as basis a study case of the reality of the City of Natal/RN (Brazil). For in such a way, it was done a retrospect on the evolution of the system of road transport in Brazil, having started to briefly analyze the urbanization process that if after accented in the capitals of the Brazilian States the decade of 1950, relating these subjects with the growth of the sector of fuel resale. After that, it was transferred boarding of the defense of the national environment to the light of ambient principles constitutional. In the sequence, a boarding on the ambient guardianship in the Federal Constitution of 1988 was made, treating basically specifies and on the national urban politics and the national politics of the environment, with its instruments. In the sequence, it was transferred the analysis of the abilities and attributions of the National Advice of the Environment (CONAMA) and its Resolutions, for then only enter in the most important part of this work: an analysis of the environmental licensing of ranks of fuel resale, in the reality of the City of Natal/RN. Before this specific boarding, it was proceeded specifically a survey and communication from the applicable norms to such establishments (Resolutions of the CONAMA and norms of the ABNT), for after that carrying through an geo-ambient characterization of the City of Natal/RN. Finally, a reflection was made on the possibility of magnifying of the state activity, in terms of guarantees for the responsible members for the environmental policy and of administrative efficiency, through the idea of the ambient regulation. For the accomplishment of this study, it was proceeded research in diverse sources such as books, magazines, sites of the Internet, periodicals, thesis and dissertations, among others material, beyond visits the agencies that direct or indirectly act with the ambient defense and as fuel resale, such as Secretariat of Environment and Urbanism of the City of Natal (SEMURB), Institute of Economic Development and Environment of RN (IDEMA), Brazilian Institute of the Environment and the Natural resources You renewed, Executive Management of RN (IBAMA/RN), Public prosecutor's office of the Environment of Natal (Public prosecution service of the RN), National Agency of Oil (ANP) and Union of the Retailing of Derivatives of Oil of the RN, among others. To the end, satiated regulation is observed that although on the substance of the ambient licensing in ranks of fuel resale, also with federal, state and municipal norms, the municipal Public Power is very far from the fulfilment of its institutional functions, in the question environmental policy of these establishments, a time that few are the permitted ranks of resale in the city of Natal/RN

Detached leaf culture: Viability to evaluate 2,4-D toxicity symptoms in cotton apex leaves

To study the viability of detached leaf culture technique, studies were carried out with detached leaves from cotton apex (true trilobed leaves). The prepared leaves were sprayed with 2,4-D amine and ester, at rates of 10, 30, 70, and 100% of the recommended doses. Detached leaves without herbicide spray were used as controls. Simultaneously, a greenhouse experiment was conducted with the same treatments as used for the detached leaves experiment. Toxicity was measured through a 0-to-5 grading according to the percentage of affected leaf area in the detached leaves experiment or examining the affected rate of whole plant as indicated in the greenhouse. Results showed that the ester form of the herbicide induced earlier and more severe toxicity symptoms in detached leaves and greenhouse grown plants. Positive and significant correlations (p < 0.001) were found between toxicity results obtained at 7 and 14 days after application in detached leaves and greenhouse plants (r = 0.97 and 0.92, respectively). Negative, significant correlations (p < 0.005) were found between the toxicity levels found at 7 and 14 days after application in detached leaves and dry matter of cotton plants grown in the greenhouse (r = -0.92 and -0.92, respectively).

Integridade tissular de pacientes com úlceras venosas: um estudo baseado na Classificação dos Resultados de Enfermagem

The venous ulcer is an epidemiological problem of high prevalence, causing disability and dependence. Assess the tissue impairment level of patients with venous lesions, within a nursing referential, is relevant for the implementation of a directed assistance to specific clientele. Thus, this work aims to characterize the health status regarding the integrity the lower limbs skin of patients with venous ulcers, according to the of tissue integrity outcome indicators from the Nursing Outcomes Classification. A cross-sectional study conducted in a university hospital in Natal - Rio Grande do Norte. The sample consisted of 50 participants, selected through consecutive sampling. Data collection occurred through a interview and physical examination form and a operational definitions tool for indicators of the nursing Tissue Integrity outcome directed to patients with venous ulcer, applied from February to June 2012. Data analysis was done by descriptive statistics and nonparametric tests (Spearman, Kruskal-Wallis and Mann-Whitney tests). The project was approved by the Research Ethics Committee with protocol 608/11 and Presentation Certificate to Ethical Consideration No. 0038.0.294.000-11. The results were presented using three scientific articles derivatives of research. It was found that the indicators show moderate impairment, light and not impaired, as the median. The respondents had an average of 59.72 years, 66% female, 50% were retired, 60% with a partner, 44% had arterial hypertension, 26% allergies, 20% diabetes mellitus, 96% were sedentary, 14% drank alcohol and 6% were smokers. There was a statistically significant correlation of low intensity between age and hydration (p=0.032; rs=-0.304) and skin desquamation (p=0.026; rs=-0.316), family income and necrosis (p=0.012; rs=-0.353); Ankle Brachial Index and tissue perfusion (p=0,044; rs=-0,329); Diabetes Mellitus and texture (p=0.015) and tissue perfusion (p=0.026); allergy and texture (p=0.034), physical activity and hydration (p=0.034), smoking and thickness (p=0.018), and alcohol consumption and exudate (p=0.045). We conclude that the patients had light to moderate impairment, indicating a good state of health on the integrity of the skin of the lower limbs, according to the indicators of the outcome of tissue integrity Classification Nursing Outcomes valued in the present study. It is believed that the evaluation of impairment tissue using a self-nursing system and its relation with socioeconomic, clinical and risk factors are unique tools in the care planning and in the wound healing

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity