Mobiilitehdaskonseptin soveltaminen puutalotuotantoon

Tullit ja kuljetuskustannukset haittaavat suomalaisten puutuotteiden hintakilpailua Venäjällä, mikä on luonut tarpeen uudenlaisten toimintamallien kehittämiselle. Tutkimuksen hypoteesina on, että soveltamalla teorioita mobiilista tuotantojärjestelmästä puutalotuotantoon pystytään vastaamaan aluerakennustoiminnan ongelmiin ja saavuttamaan kustannusetuja. Tämän työn tavoitteena on antaa yritysjohdolle kuvaus siirrettävän talotehtaan tuotantokonseptista ja arvioida toiminnan kannattavuutta. Työn tulosten avulla pyritään vastaamaan kysymyksiin: millainen on siirrettävä puutalotehdas ja onko mobiilitehdaskonsepti puutalotuotannossa taloudellisesti kannattava. Tutkimusta tarkastellaan Venäjän liiketoiminta- ja Venäjän puurakentamiskontekstissa. Tutkimus on laadullinen tapaustutkimus, jossa käytettiin useiden menetelmien yhdistelmää. Tutkimusmenetelmät sisälsivät sekä teknisen suunnittelun että kannattavuuden arvioinnin menetelmiä. Työn tekninen osa perustui tehdassuunnittelun ja konseptin kehittämisen menetelmiin. Taloudellisessa tarkastelussa käytettiin tuloslaskelmaa sekä tuottoasteen ja takaisinmaksuajan menetelmiä. Eri tekijöiden vaikutusta kannattavuuteen arvioitiin herkkyysanalyysilla. Työssä esitellään mobiilin talotehtaan tehdassuunnitelma ja tuotantokonsepti sekä sivutaan logistista konseptia. Mobiiliin talotehtaaseen sovellettiin mobiilitehdaskonseptia ja verstastuotantomallia. Mobiili talotehdas koostuu kokoonpanolinjasta, jota täydennetään esivalmistusverstailla. Investoinnille laskettiin kannattavuutta kuvaavat tunnusluvut, joiden perusteella mobiilitehdas todettiin kannattamattomaksi ja riskialttiiksi. Kannattavuuden epävarmuutta analysoitiin herkkyysanalyysillä. Kannattavuuteen vaikuttavat merkittävästi muuttuvien kustannusten ja myyntihinnan muutokset. Työssä annetaan toimenpide-ehdotuksia siirrettävän talotuotannon konseptin kehittämiseen. Keskeiset jatkotutkimuskohteet liittyvät mobiilitehtaan elinkierron toimintojen ja osakonseptien kehittämiseen.

Taajuusmuuttajan hyödyntämismahdollisuudet kompressorijärjestelmien elinkaarikustannusten optimoimisessa

Paineilmaa on kutsuttu neljänneksi perushyödykkeeksi veden, sähkön ja kaasun lisäksi. Paineilman kuluttaja on usein myös sen tuottaja. EU:n alueen teollisuudessa keskimää-rin 16 % kulutetusta kokonaissähkötehosta kuluu ilmakompressoreiden käyttöön. Taa-juusmuuttajan käyttö on viime vuosikymmeninä lisääntynyt merkittävästi, kun on pyrit-ty energiatehokkaisiin ratkaisuihin esimerkiksi pumppaus- ja puhallinjärjestelmissä. Kompressorijärjestelmissä taajuusmuuttajien käyttö ei ole vielä yhtä yleistä kuin esi-merkiksi pumppukäytöissä, vaikka taajuusmuuttajan käytöllä saavutetaan useimmissa tapauksissa huomattavia etuja. Tässä työssä tutkitaan taajuusmuuttajan hyödyntämismahdollisuuksia kompressorijär-jestelmien käytönaikaisten elinkaarikustannusten optimoimisessa. Työssä selvitetään säästöpotentiaalia, ja pohditaan pyörimisnopeussäädöllä saavutettavia etuja eri komp-ressorityypeillä. Lopuksi muodostetaan elinkaarikustannusanalyysit kahdelle todelliselle teollisuuden kompressorikohteelle. Tutkimusmenetelminä ovat kirjallisuustyö sekä asi-antuntijahaastattelut teollisuudesta. Työn tavoitteena on kartoittaa taajuusmuuttajan hyödyntämispotentiaalia kompressorijärjestelmissä ja luoda pohjaa mahdolliselle jatko-tutkimukselle.

Convergence in Industry Evolution

The objective of the thesis is to enhance understanding of the evolution of convergence. Previous research has shown that the technological interfaces between distinct industries are one of the major sources of new radical cross-industry innovations. Despite the fact that convergence in industry evolution has attracted a substantial managerial interest, the conceptual confusion within the field of convergence exists. Firstly, this study clarifies the convergence phenomenon and its impact to industry evolution. Secondly, the study creates novel patent analysis methods to analyze technological convergence and provide tools for anticipating the early stages of convergence. Overall the study combines the industry evolution perspective and the convergence view of industrial evolution. The theoretical background for the study consists of the industry life cycle theories, technology evolution, and technological trajectories. The study links several important concepts in analyzing industry evolution, technological discontinuities, path-dependency, technological interfaces as a source of industry transformation, and the evolutionary stagesof convergence. Based on reviewing the literature a generic understanding of industry transformation and industrial dynamics was generated. In the convergence studies, the theoretical basis is in the discussion of different convergence types and their impacts on industry evolution, and in anticipating and monitoring the stages of convergence. The study is divided in two parts. The first part gives a general overview, and the second part comprises eight research publications. Our case study is based historically on two very distinct industries of the paper and electronics companies as a test environment to evaluate the importance of emerging business sectors and technological convergence as a source of industry transformation. Both qualitative and quantitative research methodology are utilized. The results of this study reveal that technological convergence and complementary innovations from different fields have significant effect to the emerging new business sector formation. The patent-based indicators in the analysis of technological convergence can be utilized on analyzing technology competition, capability and competence development, knowledge accumulation, knowledge spill-overs, and technology-based industry transformation. The patent-based indicators can provide insights to the future competitive environment. Results and conclusions from empirical part seem not be in conflict with real observations in the industry.

Assessing the Environmental Value of Water Treatment Solutions in the Mining Industry

Environmental accountability has become a major source of competitive advantage for industrial companies, because customers consider it as relevant buying criterion. However, in order to leverage their environmental responsibility, industrial suppliers have to be able to demonstrate the environmental value of their products and services, which is also the aim of Kemira, a global water chemistry company considered in this study. The aim of this thesis is to develop a tool which Kemira can use to assess the environmental value of their solutions for the customer companies in mining industry. This study answers to questions on what kinds of methods to assess environmental impacts exist, and what kind of tool could be used to assess the environmental value of Kemira’s water treatment solutions. The environmental impacts of mining activities vary greatly between different mines. Generally the major impacts include the water related issues and wastes. Energy consumption is also a significant environmental aspect. Water related issues include water consumption and impacts in water quality. There are several methods to assess environmental impacts, for example life cycle assessment, eco-efficiency tools, footprint calculations and process simulation. In addition the corresponding financial value may be estimated utilizing monetary assessment methods. Some of the industrial companies considered in the analysis of industry best practices use environmental and sustainability assessments. Based on the theoretical research and conducted interviews, an Excel based tool utilizing reference data on previous customer cases and customer specific test results was considered to be most suitable to assess the environmental value of Kemira’s solutions. The tool can be used to demonstrate the functionality of Kemira’s solutions in customers’ processes, their impacts in other process parameters and their environmental and financial aspects. In the future, the tool may be applied to fit also Kemira’s other segments, not only mining industry.

Kunnossapitopalveluiden arvopohjaisen elinkaarimallin kehittäminen

Tutkimuksen päätavoitteena on luoda yleispätevä elinkaarimalli, jota voidaan hyö-dyntää laitetason kunnossapitoon liittyvissä päätöksentekotilanteissa eri teollisuu-denaloilla. Elinkaarimalliin yhdistettiin arvoajattelu, jonka pohjalta mallin käyttäjät voivat valita ja painottaa omien näkemyksiensä mukaan arvoa luovat elementit sekä nähdä muille verkostojäsenille arvoa lisäävät tekijät. Aiemmissa elinkaarimalleissa on keskitytty pääasiassa yhteen tarkastelunäkökulmaan, joten verkostotason työkalulle on selkeä tarve. Myöskään arvoajattelua ei ole aiemmin yhdistetty elinkaarilaskentaa soveltaviin malleihin. Työn osalta käytettiin konstruktiivista tutkimusotetta. Elinkaarimallia kehitettiin ja testattiin kaivosteollisuuden yritysverkostoon kuuluvien kahden case-tapauksen avulla. Tutkimuksen teoreettinen osa pohjautui työn oleellisempiin osa-alueisiin, kuten kunnossapitoon, arvoelementteihin ja elinkaarilaskentaan. Työn empiirisessä osiossa hyödynnettiin verkostoon kuuluvien yritysedustajien haastatteluita sekä yritysten tietojärjestelmästä saatuja tietoja. Arvoelementtien muodostuksessa käy-tettiin hyväksi myös muiden teollisuusyritysten ajatuksia ja näkökulmia. Työn merkittävin tulos on ensimmäisen version kehittäminen arvopohjaisesta elinkaarimallista. Elinkaarimalli antaa tuloksina jokaisen verkostojäsenen osalta laitteen kunnossapidon kustannukset ja tuotot vuositasolla sekä kumulatiivisesti koko elinkaaren ajalta niin reaali- kuin nykyarvonakin. Mallin tuloksena saadaan myös yhteistyön myötä kasvaneen lisäarvon suuruus ja jakautuminen verkoston toimijoiden välillä heidän valitsemiensa arvoelementtien mukaisesti. Näin ollen mallia voidaan käyttää tulevaisuuden ennustamisen lisäksi menneiden kustannusten ja tuottojen seurantamallina. Kokonaisuudessaan arvopohjaisen elinkaarimallin tuloksia voidaan hyödyntää laitetason kunnossapitoon liittyvissä sopimusneuvotte-luissa niin arvoa luovien elementtien kuin kustannus- ja tuottotekijöidenkin osalta. Kokonaisuudessaan arvoajattelun yhdistäminen ja hyödyntäminen elinkaarilas-kennassa on vielä alkuvaiheessa, joten kyseinen osa-alue onkin varsin järkevä jat-kotutkimuskohde. Avoimen ja tiiviin yritysyhteistyön kautta saadaan arvopohjai-sesta elinkaarimallista jatkokehitettyä erittäin hyödyllinen työkalu yritysverkosto-jen käytettäväksi. Kiristyvässä kilpailussa verkoston kokonaisarvon kasvu ja ja-kautuminen ovat tulevaisuudessa erittäin keskeisiä aihealueita, joten tämäntyylisten verkostotyökalujen hyödyntäminen nostanee ehdottomasti suosiotaan.

Licensing Model Development for Small Modular Reactors (SMRs) - Focusing on the Finnish Regulatory Framework

Recently, Small Modular Reactors (SMRs) have attracted increased public discussion. While large nuclear power plant new build projects are facing challenges, the focus of attention is turning to small modular reactors. One particular project challenge arises in the area of nuclear licensing, which plays a significant role in new build projects affecting their quality as well as costs and schedules. This dissertation - positioned in the field of nuclear engineering but also with a significant section in the field of systems engineering - examines the nuclear licensing processes and their suitability for the characteristics of SMRs. The study investigates the licensing processes in selected countries, as well as other safety critical industry fields. Viewing the licensing processes and their separate licensing steps in terms of SMRs, the study adopts two different analysis theories for review and comparison. The primary data consists of a literature review, semi-structured interviews, and questionnaire responses concerning licensing processes and practices. The result of the study is a recommendation for a new, optimized licensing process for SMRs. The most important SMR-specific feature, in terms of licensing, is the modularity of the design. Here the modularity indicates multi-module SMR designs, which creates new challenges in the licensing process. As this study focuses on Finland, the main features of the new licensing process are adapted to the current Finnish licensing process, aiming to achieve the main benefits with minimal modifications to the current process. The application of the new licensing process is developed using Systems Engineering, Requirements Management, and Project Management practices and tools. Nuclear licensing includes a large amount of data and documentation which needs to be managed in a suitable manner throughout the new build project and then during the whole life cycle of the nuclear power plant. To enable a smooth licensing process and therefore ensure the success of the new build nuclear power plant project, management processes and practices play a significant role. This study contributes to the theoretical understanding of how licensing processes are structured and how they are put into action in practice. The findings clarify the suitability of different licensing processes and their selected licensing steps for SMR licensing. The results combine the most suitable licensing steps into a new licensing process for SMRs. The results are also extended to the concept of licensing management practices and tools.

A simulation model of the optimal maintenance strategy: conceptual agent-based approach

In this Master’s thesis agent-based modeling has been used to analyze maintenance strategy related phenomena. The main research question that has been answered was: what does the agent-based model made for this study tell us about how different maintenance strategy decisions affect profitability of equipment owners and maintenance service providers? Thus, the main outcome of this study is an analysis of how profitability can be increased in industrial maintenance context. To answer that question, first, a literature review of maintenance strategy, agent-based modeling and maintenance modeling and optimization was conducted. This review provided the basis for making the agent-based model. Making the model followed a standard simulation modeling procedure. With the simulation results from the agent-based model the research question was answered. Specifically, the results of the modeling and this study are: (1) optimizing the point in which a machine is maintained increases profitability for the owner of the machine and also the maintainer with certain conditions; (2) time-based pricing of maintenance services leads to a zero-sum game between the parties; (3) value-based pricing of maintenance services leads to a win-win game between the parties, if the owners of the machines share a substantial amount of their value to the maintainers; and (4) error in machine condition measurement is a critical parameter to optimizing maintenance strategy, and there is real systemic value in having more accurate machine condition measurement systems.

Importance of considering food waste in the development of sustainable food packaging systems

Meeting the needs of both present and future generations forms the foundation of sustainable development. Concern about food demand is increasing alongside the continuously growing population. In the pursuit of food security preventing food waste is one solution avoiding the negative environmental impacts that result from producing food unnecessarily. Packages offer one answer to preventing food waste, as they 1) preserve and protect food, 2) introduce the user to the correct way to handle and use the food and package and 3) allow the user to consume the food in its entirety. This thesis aims to enhance the sustainability of food packages by giving special emphasis to preventing food waste. The focus of this thesis is to assist the packaging designer in being able to take into account the requirements for the sustainability of food packages and to be able to integrate these requirements into the product development process. In addition, life cycle methods that can be used as a tool in the packaging design process or in assessing the sustainability of finished food-packaging combinations are evaluated. The methods of life cycle costing (LCC) and life cycle working environment (LCWE) are briefly discussed. The method of life cycle assessment (LCA) is examined more thoroughly through the lens of the literature review of food-package LCA case studies published in the 21st century in three relevant journals. Based on this review and on experiences learned from conducting LCAs, recommendations are given as to how the LCA practitioner should conduct a food packaging study to make most of the results. Two case studies are presented in this thesis. The first case study relates the results of a life cycle assessment conducted for three food items (cold cut (ham), sliced dark bread (rye) and Soygurt drink) and the alternative packaging options of each. Results of this study show that the packaging constitutes only 1–12 % of the total environmental impacts of the food-packaging combination. The greatest effect is derived from the food itself and the wasted food. Even just a small percentage of wasted food causes more environmental impacts than does the packaging. The second case study presents the results of LCC and LCWE analysis done for fruit and vegetable transport packages. In this thesis, the specific results of the study itself are not the focus, but rather the study methods and scope are analysed based on how these complement the sustainability assessment of food packages. This thesis presents reasons why prevention of food waste should be more thoroughly taken into account in food packaging design. In addition, the task of the packaging designer is facilitated by the requirements of sustainable food packaging, by the methods and step-by-step guidance on how to integrate sustainability issues into the design process, and by the recommendations on how to assess the sustainability of food packages. The intention of this thesis is to express the issues that are important in the field of the food packaging industry. Having recognised and implemented these issues, businesses can better manage the risks that could follow from neglecting these sustainability aspects.

Occurrence of weeds in Cassava savanna plantations in Roraima

A phyto-sociological survey is the first step to implement integrated weed management in crops. In this study, weed occurrence was evaluated in cassava plantations in the savannah of Roraima in northern Brazil. Harvest was performed randomly 80 times in 10 crops over four seasons (January, February, March, and April 2012). The harvested plants were cut at ground level, sorted out per species, identified, quantified, and weighed on a 0.01 g precision scale. A descriptive analysis was conducted of the phyto-sociological parameters (frequency, density, abundance, total number of individuals per species, relative frequency, relative density, relative abundance and importance value index) for the collected species. A description was also made of the botanical classes, families, species, type of propagation, life cycle, growth habit, total number of species and dry weight ha-1. The community in the surveyed area was considered to have a heterogeneous composition, comprising 27 species. The species presenting the highest density per hectare were Digitaria sanguinalis (210,500), Brachiaria brizantha (111,000), Brachiaria decumbens (86,500) and Brachiaria humidicola (69,000). Digitaria sanguinalis had the highest relative density (28.08), relative abundance (26.16) and importance value index (65,34). Most weeds had herbaceous growth habit.

Project Controlling and Management in IT Consulting Enterprise

Liiketoiminnan organisoiminen projekteiksi on erittäin yleistä nykyisin. Suuri osa projekteista erityisesti IT-alalla epäonnistuu kuitenkin saavuttamaan tavoitteensa. Projektin menestys on tyypillisesti mitattu budjetin, aikataulun, laadun ja sidosryhmien tyytyväisyyden perusteella. Tämän Pro Gradu -tutkielman tarkoituksena on etsiä tyypillisimpiä syitä projektien epäonnistumiseen ja löytää projektien seurannan ja mittaamisen avulla keinoja näiden epäonnistumisten ehkäisemiseen. Tutkimusmenetelmänä on laadullinen tapaustutkimus. Empiirinen aineisto on kerätty haastattelujen, eri materiaalien analysoinnin ja havainnoinnin avulla. Teoriaosuus tarjoaa kattavan yhteenvedon projektiliiketoiminnan ja yksittäisten projektien johtamiseen sekä projektien seurantaan ja mittaamiseen aikaisemman kirjallisuuden perusteella. Empiirisessä osiossa suoritetaan analyysi Case -yrityksen projektien seurantaan ja valittuihin projekteihin. Analyysien, haastattelujen ja havainnoinnin pohjalta tehdään johtopäätökset tyypillisimmistä, ongelmia projekteissa aiheuttavista tekijöistä sekä näiden esiintymisestä projektin elinkaaren eri vaiheissa. Mahdolliset ongelmia ehkäisevät keinot esitetään myös. Ehdotuksia kehityskohteiksi esitetään lopuksi teorian ja empirian pohjalta.

Utilization of steelmaking waste materials for production of calcium carbonate (CaCO3)

The steel industry produces, besides steel, also solid mineral by-products or slags, while it emits large quantities of carbon dioxide (CO2). Slags consist of various silicates and oxides which are formed in chemical reactions between the iron ore and the fluxing agents during the high temperature processing at the steel plant. Currently, these materials are recycled in the ironmaking processes, used as aggregates in construction, or landfilled as waste. The utilization rate of the steel slags can be increased by selectively extracting components from the mineral matrix. As an example, aqueous solutions of ammonium salts such as ammonium acetate, chloride and nitrate extract calcium quite selectively already at ambient temperature and pressure conditions. After the residual solids have been separated from the solution, calcium carbonate can be precipitated by feeding a CO2 flow through the solution. Precipitated calcium carbonate (PCC) is used in different applications as a filler material. Its largest consumer is the papermaking industry, which utilizes PCC because it enhances the optical properties of paper at a relatively low cost. Traditionally, PCC is manufactured from limestone, which is first calcined to calcium oxide, then slaked with water to calcium hydroxide and finally carbonated to PCC. This process emits large amounts of CO2, mainly because of the energy-intensive calcination step. This thesis presents research work on the scale-up of the above-mentioned ammonium salt based calcium extraction and carbonation method, named Slag2PCC. Extending the scope of the earlier studies, it is now shown that the parameters which mainly affect the calcium utilization efficiency are the solid-to-liquid ratio of steel slag and the ammonium salt solvent solution during extraction, the mean diameter of the slag particles, and the slag composition, especially the fractions of total calcium, silicon, vanadium and iron as well as the fraction of free calcium oxide. Regarding extraction kinetics, slag particle size, solid-to-liquid ratio and molar concentration of the solvent solution have the largest effect on the reaction rate. Solvent solution concentrations above 1 mol/L NH4Cl cause leaching of other elements besides calcium. Some of these such as iron and manganese result in solution coloring, which can be disadvantageous for the quality of the PCC product. Based on chemical composition analysis of the produced PCC samples, however, the product quality is mainly similar as in commercial products. Increasing the novelty of the work, other important parameters related to assessment of the PCC quality, such as particle size distribution and crystal morphology are studied as well. As in traditional PCC precipitation process, the ratio of calcium and carbonate ions controls the particle shape; a higher value for [Ca2+]/[CO32-] prefers precipitation of calcite polymorph, while vaterite forms when carbon species are present in excess. The third main polymorph, aragonite, is only formed at elevated temperatures, above 40-50 °C. In general, longer precipitation times cause transformation of vaterite to calcite or aragonite, but also result in particle agglomeration. The chemical equilibrium of ammonium and calcium ions and dissolved ammonia controlling the solution pH affects the particle sizes, too. Initial pH of 12-13 during the carbonation favors nonagglomerated particles with a diameter of 1 μm and smaller, while pH values of 9-10 generate more agglomerates of 10-20 μm. As a part of the research work, these findings are implemented in demonstrationscale experimental process setups. For the first time, the Slag2PCC technology is tested in scale of ~70 liters instead of laboratory scale only. Additionally, design of a setup of several hundreds of liters is discussed. For these purposes various process units such as inclined settlers and filters for solids separation, pumps and stirrers for material transfer and mixing as well as gas feeding equipment are dimensioned and developed. Overall emissions reduction of the current industrial processes and good product quality as the main targets, based on the performed partial life cycle assessment (LCA), it is most beneficial to utilize low concentration ammonium salt solutions for the Slag2PCC process. In this manner the post-treatment of the products does not require extensive use of washing and drying equipment, otherwise increasing the CO2 emissions of the process. The low solvent concentration Slag2PCC process causes negative CO2 emissions; thus, it can be seen as a carbon capture and utilization (CCU) method, which actually reduces the anthropogenic CO2 emissions compared to the alternative of not using the technology. Even if the amount of steel slag is too small for any substantial mitigation of global warming, the process can have both financial and environmental significance for individual steel manufacturers as a means to reduce the amounts of emitted CO2 and landfilled steel slag. Alternatively, it is possible to introduce the carbon dioxide directly into the mixture of steel slag and ammonium salt solution. The process would generate a 60-75% pure calcium carbonate mixture, the remaining 25-40% consisting of the residual steel slag. This calcium-rich material could be re-used in ironmaking as a fluxing agent instead of natural limestone. Even though this process option would require less process equipment compared to the Slag2PCC process, it still needs further studies regarding the practical usefulness of the products. Nevertheless, compared to several other CO2 emission reduction methods studied around the world, the within this thesis developed and studied processes have the advantage of existing markets for the produced materials, thus giving also a financial incentive for applying the technology in practice.

Functional, Social and Emotional Values as Determinants of Environmentally Responsible Media Consumption

The primary purpose of this research is to develop an enhanced understanding of how consumption values influence environmentally responsible consumption of print and digital media. Theoretical elaboration considers the associations of functional, social and emotional consumption values, green consumer segmentation and media consumption. Additionally, the purpose is to identify consumer perceptions of print and digital media’s environmental responsibility. Empirical analysis was based on qualitative interviews with a sample of 20 Finnish consumers categorized in two segments: young adults and middle aged consumers. Primary data collection was conducted through individual, semi-structured interviews. To analyze the respondents’ approach on the topic, the interviews disclosed themes of media consumption, perceived environmental friendliness of media, norms of behavior and consumers’ general consumption patterns. The results implicate functional value dominated the consumption decision-making process both in a general level and in media consumption. In addition to functional value, environmental responsibility does provide consumers with both emotional and social values. Analysis on perceived environmental responsibility of media demonstrated consumers generally perceive digital media as an environmentally responsible alternative because it does not create physical paper waste. Nevertheless, the perceptions of environmental responsibility and media consumption patterns lacked a consistent connection. Though, both theory and empirical results indicated an average consumer lacks a comprehensive understanding of digital and print media’s life-cycle and hence their environmental advantages and disadvantages.

Liikennebiokaasun jakelu Mikkelin seudulla: teknologia-, kustannus- ja kannattavuustarkastelu

Tämän diplomityön tarkoituksena oli tarkastella biokaasun liikennekäyttöön tarvittavia teknologisia ratkaisuja ja tehdä kustannusvertailua erilaisten jakeluvaihtoehtojen välillä Mikkelin ympäristön case-tapauksessa. Työn teoriaosassa on esitelty teknologisia vaihtoehtoja liikennebiokaasun jakelulle sekä eri teknologioiden kustannuksia. Tietämys eri teknologiavaihtoehdoista ja niiden hinnoista on muodostettu kirjallisuuskatsauksen, asiantuntijahaastatteluiden sekä saatujen tarjousten perusteella. Työn empiriaosassa on tarkasteltu kolmen eri jakeluskenaarion kustannuksia käyttäen elinkaarikustannuslaskentaa, sekä toimintoperusteista kustannuslaskentaa. Liikennebiokaasun jakelun kustannuksiksi työn case-tapauksissa saatiin jakelutavasta riippuen 0,37 €/kg – 1,02 €/kg (2,64 snt/kWh – 7,29 snt/kWh). Edullisin vaihtoehto liikennebiokaasun jakeluun on työn perusteella myydä tuotettu kaasu tuotantolaitoksella. Jos kaasua siirretään tankattavaksi tytärasemalle, on vaihtoehtoina paineistettu kaasu siirtokontein, nesteytetty kaasu trailerilla tai putkisiirto. Halvin siirtokeino tämän työn skenaarioissa oli kaasun putkisiirto.

How to increase brand quality perception with audiovisual content? : Exploring the role of emotions in B2C and B2B contexts

This study discusses how audiovisual content can influence brand quality perceptions. The purpose of this study is to explore how audiovisual content creation can increase brand quality perceptions. This research problem is addressed with three sub questions, which aim at clarifying the role of emotions between content marketing and brand quality perception, explaining how different functions of audiovisual content can increase brand quality perception, and by identifying and comparing the key differences in content creation in business-to-consumer and business-to-businesscontexts. The theoretical background of the study is in brand personality, consumer emotions, consumerbrand relationships, content marketing and B2B branding literature. The empirical research part includes a single-case study. The case company was a Swiss startup that wished to build a highquality brand for both B2C and B2B segments. The empirical data was collected in September 2014. Eight interviews were conducted; seven with target segment representatives and one with an existing customer of the case company. The empirical findings were analyzed with thematic analysis and finally a 5-stage framework was created based on the findings of the research, offering a guideline for high-quality content creation. This study finds that emotions play an important role in brand quality perceptions. Psychological processes, emotion, cognition and conation, influence the engagement process of the target segment which ultimately can lead to activation and electronic word-of-mouth. Brand quality perception is the result of the overall emotion of the brand. The overall emotion derives from brand personality, brand concept, product attributes and utilitarian benefits of the brand. The entertaining and educational functions of the audiovisual content can target and evoke these emotional processes, and result in increased quality perceptions. In the B2B context, emotions are found to play a relatively smaller role in the quality perception processes. However, the significance of emotions cannot be ignored, since they can emphasize the value for the buying organization, and build on the trust and loyalty among the potential customers. The final framework presents five stages of content creation that ultimately improve brand quality perceptions. These stages help marketers to design and implement their content and evoke positive emotions in their target segment as part of a quality-based marketing strategy. Further research is warranted to quantitatively test the generalizability of the framework. Further research is also suggested to make the framework adaptable to different stages of the brand life cycle.

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.