Determination of chlorine in food samples via the AlCl molecule using high-resolution continuum source molecular absorption spectrometry in a graphite furnace

Determination of chlorine using the molecular absorption of aluminum mono-chloride (AlCl) at the 261.418 nm wavelength was accomplished by high-resolution continuum source molecular absorption spectrometry using a transversely heated graphite tube furnace with an integrated platform. For the analysis. 10 mu L of the sample followed by 10 mu L of a solution containing Al-Ag-Sr modifier, (1 g L-1 each), were directly injected onto the platform. A spectral interference due to the use of Al-Ag-Sr as mixed modifier was easily corrected by the least-squares algorithm present in the spectrometer software. The pyrolysis and vaporization temperatures were 500 degrees C and 2200 degrees C, respectively. To evaluate the feasibility of a simple procedure for the determination of chlorine in food samples present in our daily lives, two different digestion methods were applied, namely (A) an acid digestion method using HNO3 only at room temperature, and (B) a digestion method with Ag, HNO3 and H2O2, where chlorine is precipitated as a low-solubility salt (AgCl), which is then dissolved with ammonia solution. The experimental results obtained with method B were in good agreement with the certified values and demonstrated that the proposed method is more accurate than method A. This is because the formation of silver chloride prevented analyte losses by volatilization. The limit of detection (LOD, 3 sigma/s) for Cl in methods A and B was 18 mu g g(-1) and 9 mu g g(-1), respectively, 1.7 and 3.3 times lower compared to published work using inductively coupled plasma optical emission spectrometry, and absolute LODs were 2.4 and 1.2 ng, respectively. (C) 2012 Elsevier B.V. All rights reserved.

Analysis of Insect Cuticular Compounds by Non-lethal Solid Phase Micro Extraction with Styrene-Divinylbenzene Copolymers

Insect cuticular hydrocarbons including relatively non-volatile chemicals play important roles in cuticle protection and chemical communication. The conventional procedures for extracting cuticular compounds from insects require toxic solvents, or non-destructive techniques that do not allow storage of subsequent samples, such as the use of SPME fibers. In this study, we describe and tested a non-lethal process for extracting cuticular hydrocarbons with styrene-divinylbenzene copolymers, and illustrate the method with two species of bees and one species of beetle. The results demonstrate that these compounds can be efficiently trapped by ChromosorbA (R) (SUPELCO) and that this method can be used as an alternative to existing methods.

U-Pb dating by zircon dissolution method using chemical abrasion

Chemical abrasion was carried out on zircons grains of the Temora II standard for U-Pb dating prior to analyses using in situ Laser Ablation-MultiCollector Ion Coupled Plasma Mass Spectrometer (LA-ICPMS) followed by the Isotope Dissolution Thermal Ionization Mass Spectrometer (ID-TIMS) method. The proposed methodology was herein applied in order to reduce primarily the effects of secondary Pb loss, the presence of common lead and/or silicate impurities. Nine Temora II zircon grains were analyzed by the laser ablation method yielding an age of 418.3±4.3 Ma. Zircon grains of a same population were separated for chemical abrasion before dissolution and mass spectrometry analyses. Six fractions of them were separated for isotope dissolution using 235U-205Pb mixed spike after we have checked and assured the laboratory conditions of low blank values for total Pb of less than 2 pg/g. The obtained U-Pb zircon age by the ID-TIMS method was 415.7±1.8 Ma (error 0.43 %) based on four successful determinations. The results are consistent with the published ages for the Temora diorite (Temora I â 416.75±1.3 Ma; Temora II â 416.78±0.33 Ma) and established as 416±0.33 Ma. The technique is thus recommended for high precision U-Pb zircon analyses (error < 1 %), mainly for high resolution stratigraphic studies of Phanerozoic sequences.

Perfil das mulheres submetidas à cesareana e assistência obstétrica na maternidade pública em Ribeirão Preto

O artigo apresenta o perfil social e obstétrico das mulheres submetidas ao parto cesárea em uma maternidade pública do interior do Estado de São Paulo. Trata-se de estudo quantitativo, retrospectivo, do tipo descritivo, com pesquisa documental. Os dados coletados referem-se ao período entre os meses de junho e dezembro de 2005, e janeiro a junho de 2006. Foram consultados 670 prontuários. A taxa de parto cesárea na instituição-campo foi calculada em 23% para o período supracitado. Foram características da população estudada a baixa escolaridade formal, a união consensual e o trabalho não remunerado. As principais indicações para as cesarianas foram a iteratividade e o sofrimento fetal agudo. Como desdobramento dos achados está a ênfase pela valorização da enfermagem obstétrica no cenário de atendimento ao parto normal de baixo risco, considerando seu caráter não-intervencionista inerente à sua formação.

Analisando frames tecnológicos: um estudo das interpretações sociais da tecnologia da informação no contexto organizacional

Frames tecnológicos (estruturas cognitivas compartilhadas em relação à tecnologia) constituem a temática desta pesquisa. O objetivo foi analisar a natureza e a extensão de diferenças em frames tecnológicos de grupos sociais distintos, assim como compreender as razões para congruências e incongruências. A pesquisa foi realizada em uma instituição de ensino superior, e o objeto de estudo tratou-se de um sistema de informação acadêmico internacional, implementado e em uso nessa instituição. Com pressupostos epistemológicos sustentados pela perspectiva interpretativa, metodologicamente o estudo caracterizou-se por uma abordagem qualitativa. Entrevistas em profundidade, observação participante, revisão documental e artefato físico constituíram-se como as fontes de dados empíricos. Adotaram-se os fundamentos do método hermenêutico-dialético para análise e interpretação dos dados coletados. O estudo propiciou identificar que diferentes interpretações sobre o sistema de informação acadêmico são socialmente construídas pelos indivíduos inseridos em grupos sociais e fortemente afetadas pelo que acreditam, conhecem e esperam desse sistema. Características pessoais, contextuais e tecnológicas integram-se criando, reforçando e modificando frames tecnológicos, contribuindo para o delineamento de congruências e incongruências.

O treinamento físico aeróbio inibe a sinalização apoptótica muscular esquelética mediada por VEGF-VEGR2 em ratos espontaneamente hipertensos

O treinamento físico aeróbio (TF) tem sido utilizado como um importante tratamento não farmacológico da hipertensão arterial (HA), uma vez que ele corrige a rarefação microvascular e reduz a pressão arterial. Estudos mostram que as anormalidades microvasculares estão diretamente associadas às alterações do fator de crescimento vascular endotelial (VEGF) e do VEGF receptor 2 (VEGFR2), bem como a um desequilíbrio da sinalização apoptótica na HA. Entretanto, pouco se conhece sobre os efeitos do TF sobre estes parâmetros na HA. Nós hipotetizamos que o TF recupere os fatores angiogênicos e promova um equilíbrio entre as proteínas anti e pró-apoptóticas da família Bcl-2 potencialmente, contribuindo para a revascularização e regressão da doença. Ratos espontaneamente hipertensos (SHR, n = 14) e Wistar Kyoto (WKY, n = 14) com 12 semanas de vida e divididos em quatro grupos: SHR, SHR treinado (SHR-T), WKY e WKY treinado (WKY-T) foram estudados. Como esperado, 10 semanas de TF foram efetivas em reduzir a pressão arterial em SHR-T. Além disso, o TF promoveu bradicardia de repouso nos grupos de animais treinados (WKY-T e SHR-T), sendo considerado como um importante marcador de TF aeróbio. O TF também corrigiu a rarefação capilar em SHR-T e esta resposta se deve em grande parte por uma recuperação dos níveis periféricos de VEGF e um aumento na expressão de VEGFR2. Em paralelo, foi observada uma normalização das vias apoptóticas, com aumento da expressão de proteínas antiapoptóticas (Bcl-2 e Bcl-x) e redução das pró-apoptóticas (Bad) acompanhada pela fosforilação de Bad. Estes resultados sugerem que o TF promove revascularização periférica na HA dependente de um fino balanço de reguladores positivos e negativos de angiogênese.

Influencia de un patrón de dieta mediterránea en la distribución de la grasa corporal en pacientes canarios con riesgo cardiovascular

Programa de doctorado: Salud pública (epidemilogía, planificación y nutrición)

El imaginario americano en las letras canarias

[ES] Los textos literarios con referencias socio-espaciales constituyen una importante vía de conocimiento geográfico. De ellos nos valemos en este trabajo para descubrir los vínculos de la literatura canaria con el paisaje y cultura americanos. Los nexos de una historia compartida y el cultivo de la conciencia del paisaje dan sentido a una investigación, cuyo objeto es desvelar el interés geográfico de los textos de los escritores canarios. La literatura de Canarias nos ofrece páginas de indudable belleza, que nos permiten recrear el papel del paisaje y la cultura americanos en el imaginario colectivo y en la forja de la identidad atlántica. Sin estos elementos sería imposible interpretar la geografía e historia  de Canarias.

Cambios en la legislación electoral durante el sexenio (1868-1874): sus repercusiones en Canarias

[ES] El proceso de consolidación del régimen liberal a lo largo del siglo XIX plantea la necesidad de establecer un sistema de representación política. Conseguir el equilibrio del poder político, será el fin último que perseguirán los diversos modelos que se ofrecen para llevar a efecto esta representación a través del sufragio y los sistemas electorales. Modelos que varían en función de los intereses e ideologías que en esos momentos esté en juego.

Application of chromatographic and spectroscopic techniques in the evaluation of the lipid fraction of animal products

Lipolysis and oxidation of lipids in foods are the major biochemical and chemical processes that cause food quality deterioration, leading to the characteristic, unpalatable odour and flavour called rancidity. In addition to unpalatability, rancidity may give rise to toxic levels of certain compounds like aldehydes, hydroperoxides, epoxides and cholesterol oxidation products. In this PhD study chromatographic and spectroscopic techniques were employed to determine the degree of rancidity in different animal products and its relationship with technological parameters like feeding fat sources, packaging, processing and storage conditions. To achieve this goal capillary gas chromatography (CGC) was employed not only to determine the fatty acids profile but also, after solid phase extraction, the amount of free fatty acids (FFA), diglycerides (DG), sterols (cholesterol and phytosterols) and cholesterol oxidation products (COPs). To determine hydroperoxides, primary products of oxidation and quantify secondary products UV/VIS absorbance spectroscopy was applied. Most of the foods analysed in this study were meat products. In actual fact, lipid oxidation is a major deterioration reaction in meat and meat products and results in adverse changes in the colour, flavour and texture of meat. The development of rancidity has long recognized as a serious problem during meat handling, storage and processing. On a dairy product, a vegetal cream, a study of lipid fraction and development of rancidity during storage was carried out to evaluate its shelf-life and some nutritional features life saturated/unsaturated fatty acids ratio and phytosterols content. Then, according to the interest that has been growing around functional food in the last years, a new electrophoretic method was optimized and compared with HPLC to check the quality of a beehive product like royal jelly. This manuscript reports the main results obtained in the five activities briefly summarized as follows: 1) comparison between HPLC and a new electrophoretic method in the evaluation of authenticity of royal jelly; 2) study of the lipid fraction of a vegetal cream under different storage conditions; 3) study of lipid oxidation in minced beef during storage under a modified atmosphere packaging, before and after cooking; 4) evaluation of the influence of dietary fat and processing on the lipid fraction of chicken patties; 5) study of the lipid fraction of typical Italian and Spanish pork dry sausages and cured hams.

Ansatz zur Etablierung von konditional/reversiblen knock-out Mäusen für das zellspezifische T-Zell Onkogen SCL

Ziel der vorliegenden Arbeit war es, ein innovatives System zur Herstellung einer konditional/reversiblen SCL-knock-out Maus zu etablieren. Es wurde deshalb ein neuer knock-in/knock-out Ansatz mit Hilfe des Tet-Systems gewählt. Im Rahmen dieser Arbeit war es möglich für die Generierung der konditionalen SCL-knock-out Maus essentielle Effektor- und Respondermauslinien zu etablieren und zu charakterisieren. Durch knock-in der rtTA-cDNA in den SCL-Lokus wurde eine Effektormauslinie hergestellt, welche in allen untersuchten hämatopoietischen Geweben rtTA exprimierte.Die zur Generierung der SCL-knock-out Maus notwendigen transgenen Responderlinien wurden ebenfalls generiert. Diese Linien wurden in einem Funktionsassay auf ihre Regulierbarkeit rekombinanter SCL-Expression untersucht. Dabei wurde eine Linie identifiziert, welche stringent/exogen regulierbar war.Effektor- und Responderlinie konnten etabliert und durch adäquate Kreuzung eine heterozygote Effektor/Responderlinie generiert werden. Die Rückkreuzung dieser Linie bei gleichzeitiger Gabe von DOX sollte in der konditionalen/reversiblen SCL-knock-out Maus resultieren. Bei Ende dieser Arbeit wurde allerdings in keinem Fall ein Rescue des letalen SCL Nullhintergrunds durch die rtTA-vermittelte rekombinante SCL-Expression beobachtet. Die in dieser Arbeit bereits hergestellten und verbesserten neuen Effektorkonstrukte sowie das Zurückgreifen auf alle vorhandenen SCL-Respondermäuse können in Zukunft zur erfolgreichen Etablierung eines exogen regulierbaren konditional/reversiblen SCL knock-out führen.

Internal characteristics, chemical compounds and spectroscopy of sapphire as single crystals

In this study more than 450 natural sapphire samples (most of basaltic type) collected from 19 different areas were examined. They are from Dak Nong, Dak Lak, Quy Chau, two unknown sources from the north (Vietnam); Bo Ploi, Khao Ploi Waen (Thailand); Ban Huay Sai (Laos); Australia; Shandong (China); Andapa, Antsirabe, Nosibe (Madagascar); Ballapana (Sri Lanka); Brazil; Russia; Colombia; Tansania and Malawi. rnThe samples were studied on internal characteristics, chemical compositions, Raman-, luminescence-, Fourier transform infrared (FTIR)-, and ultraviolet-visible-near infrared (UV-Vis-NIR)- spectroscopy. The internal features of these sapphire samples were observed and identified by gemological microscope, con focal micro Raman and FTIR spectroscopy. The major and minor elements of the samples were determined by electron probe microanalysis (EPMA) and the trace elements by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). rnThe structural spectra of sapphire were investigated by con focal Raman spectroscopy. The FTIR spectroscopy was used to study the vibration modes of OH-groups and also to determine hydrous mineral inclusions in sapphire. The UV-Vis-NIR absorption spectroscopy was used to analyze the cause of sapphire color. rnNatural sapphires contain many types of mineral inclusions. Typically, they are iron-containing inclusions like goethite, ilmenite, hematite, magnetite or silicate minerals commonly feldspar, and often observed in sapphires from Asia countries, like Dak Nong, Dak Lak in the south of Vietnam, Ban Huay Sai (Laos), Khao Ploi Waen and Bo Ploi (Thailand) or Shandong (China). Meanwhile, CO2-diaspore inclusions are normally found in sapphires from Tansania, Colombia, or the north of Vietnam like Quy Chau. rnIron is the most dominant element in sapphire, up to 1.95 wt.% Fe2O3 measured by EPMA and it affects spectral characteristics of sapphire.rnThe Raman spectra of sapphire contain seven peaks (2A1g + 5Eg). Two peaks at about 418.3 cm-1 and 577.7 cm-1 are influenced by high iron content. These two peaks shift towards smaller wavenumbers corresponding to increasing iron content. This shift is showed by two equations y(418.3)=418.29-0.53x andy(577.7)=577.96-0.75x, in which y is peak position (cm-1) and x is Fe2O3 content (wt.%). By exploiting two these equations one can estimate the Fe2O3 contents of sapphire or corundum by identifying the respective Raman peak positions. Determining the Fe2O3 content in sapphire can help to distinguish sapphires from different origins, e.g. magmatic and metamorphic sapphire. rnThe luminescence of sapphire is characterized by two R-lines: R1 at about 694 nm and R2 at about 692 nm. This characteristic is also influenced by high iron content. The peak positions of two R-lines shift towards to smaller wavelengths corresponding to increasing of iron content. This correlation is showed by two equations y(R_2 )=692.86-0.049x and y(R_1 )=694.29-0.047x, in which y is peak position (nm) of respective R-lines and x is Fe2O3 content (wt.%). Two these equations can be applied to estimate the Fe2O3 content of sapphire and help to separate sapphires from different origins. The luminescence is also applied for determination of the remnant pressure or stress around inclusions in Cr3+-containing corundum by calibrating a 0-pressure position in experimental techniques.rnThe infrared spectra show the presence of vibrations originating from OH-groups and hydrous mineral inclusions in the range of 2500-4000 cm-1. Iron has also an effect upon the main and strongest peak at about 3310 cm-1. The 3310 cm-1 peak is shifted to higher wavenumber when iron content increases. This relationship is expressed by the equation y(3310)=0.92x+3309.17, in which y is peak position of the 3310 cm-1 and x is Fe2O3 content (wt.%). Similar to the obtained results in Raman and luminescence spectra, this expression can be used to estimate the Fe2O3 content and separate sapphires from different origins. rnThe UV-Vis-NIR absorption spectra point out the strong and sharp peaks at about 377, 387, and 450 nm related to dispersed Fe3+, a broad band around 557 and 600 nm related to intervalence charge transfer (IVCT) Fe2+/Ti4+, and a broader band around 863 nm related to IVCT of Fe2+/Fe3+. rnGenerally, sapphires from different localities were completely investigated on internal features, chemical compounds, and solid spectral characteristics. The results in each part contribute for identifying the iron content and separate sapphires from different localities order origins. rn