The use of mixed methods research in the behavioral sciences field

Mixed methods research involves the combined use of quantitative and qualitative methods in the same research study, and it is becoming increasingly important in several scientific areas. The aim of this paper is to review and compare through a mixed methods multiple-case study the application of this methodology in three reputable behavioural science journals: the Journal of Organizational Behavior, Addictive Behaviors and Psicothema. A quantitative analysis was carried out to review all the papers published in these journals during the period 2003-2008 and classify them into two blocks: theoretical and empirical, with the latter being further subdivided into three subtypes (quantitative, qualitative and mixed). A qualitative analysis determined the main characteristics of the mixed methods studies identified, in order to describe in more detail the ways in which the two methods are combined based on their purpose, priority, implementation and research design. From the journals selected, a total of 1.958 articles were analysed, the majority of which corresponded to empirical studies, with only a small number referring to research that used mixed methods. Nonetheless, mixed methods research does appear in all the behavioural science journals studied within the period selected, showing a range of designs, where the sequential equal weight mixed methods research design seems to stand out.

Factors affecting the usability of aspen (Populus tremula) wood dried at different temperature levels

In this dissertation the main aim was to study the usability of aspen wood in the mechanical wood processes, especially the factors that affect the usability of aspen wood, which is dried at different temperature levels. The problematic of varying temperatures from level to another seem to have significant effects on distortions. According to the studies conducted, many practical solutions for drying of aspen timber can be made. European aspen sawn timber should be dried in relatively narrow widths, short lengths, edged and sawn pith free. The results achieved give an interesting view for the distortions of aspen wood between HT drying and heat treatment. The most significant result is that cupping seems to decrease when increasing temperature level from HT drying to heat treatment phase. The difference is significant. Other very obvious result is that bow and crook are increasing between these two temperature levels, bow significantly. Also the modelling gives a good background for this result since cupping is reduced by higher temperatures. It can also be assumed that these distortions can be affected for example by sorting out the timber used to different moisture levels before drying. This could be a very simple solution for practical purposes. From practical point of view, it was also noted during the drying tests performed that the discoloration seem to be no problem for aspen boards dried in temperatures under 150 °C. Altogether, this dissertation covers many interesting points of view of factors affecting distortions of wood in different temperature stages. Aspen as species in use of mechanical wood industries seems to be a species suitable for component production. According to the results, the best yield from aspen timber can be achieved in industry that can utilize relatively short components of sawn wood. Results achieved give a significant indication about the factors affecting distortions of wood at different temperature stages of drying, especially considering European aspen.

Prognostic Markers and Prolonged Interferon-alpha Therapy in Renal Cell Carcinoma

Molekyylimarkkerit ja pitkäaikainen alfainterferonihoito munuaissyövässä Munuaissyöpäpotilaiden viiden vuoden elossaololuku on noin 50 %. Aikaisempien tutkimuksien mukaan viiden vuoden elossaololuku metastasoituneessa munuaissyövässä on 3-16 %, kun käytettiin alfainterferonia sisältävää hoitoa. Tyypillisesti alfainterferonia on käytetty vähemmäin kuin 6 kuukautta. Avoimia kysymyksiä ovat alfainterferonin optimaalinen hoitoannos ja hoidon kesto yksin tai yhdessä uusien täsmähoitojen kanssa. Tärkeimmät tavoitteet olivat tutkia 1) jaksotetun pitkäaikaisen alfainterferonihoidon tehoa ja siedettävyyttä metastasoituneessa munuaissyövässä ja 2) p53-, Ki-67- ja COX-2-proteiinituotannon ennusteellista merkitystä munuaissyövässä. Tutkimuksessa 117 metastasoituneelle munuaissyöpää sairastaneelle potilaalle etsittiin yksilöllinen hänen sietämänsä maksimaalinen hoitoannos rekombinanttia alfa2a-interferonia (Roferon-ATM). Hoitoa pyrittiin jatkamaan 24 kuukauden ajan. Kolmen hoitoviikon jälkeen pidettiin yhden viikon tauko. Hoito lopetettiin, jos ilmaantui vakavia haittavaikutuksia tai tauti eteni. Toisessa tutkimuksessa proteiinituotanto analysoitiin immunohistokemiallisesti munuaissyöpäpotilaiden kasvainnäytteistä, joita oli säilytetty parafiinissa. Kasvainnäytteet oli otettu talteen munuaisen poistoleikkauksen yhteydessä. Nämä potilaat jaettiin kolmeen eri ryhmään: metastasointi primaarivaiheessa (n=29), metastasointi myöhemmin (n=37) ja ei metastasointia (n=51). Keskimääräinen alfainterferonihoidon kesto oli 11 kuukautta (kk) [0,5 – 32 kk]. Objektiivinen hoitovaste todettiin 17 %:lla, tautitilanne pysyi ennallaan 42 %:lla ja myöhäinen vaste (yli 12 kk:tta hoidon aloittamisesta) todettiin 3 %:lla. Aika vasteen saavuttamisesta taudin etenemiseen oli keskimäärin 8 kk ja elinaika 19,1 kk. Viiden vuoden elossaololuku oli 16 %. Jos metastasoituneella munuaissyöpäpotilaalla oli keuhkometastasointi, hän selvisi todennäköisemmin viisi vuotta kuin muut potilaat. Henkeä uhkaavia sivuvaikutuksia ei todettu. Yli 12 kk:n ajan kestävä alfainterferonihoito on hyödyllistä niille potilaille, jotka ovat saaneet objektiivisen hoitovasteen tai tautitilanne on pysynyt ennallaan. Positiivinen p53- ja Ki-67-ekspressio yhdessä viittaavat suureen metastasoinnin todennäköisyyteen. Positiivinen COX-2-ekspressio viittaa viivästyneeseen metastaasien ilmaantumiseen. Metastasoituneilla potilailla positiiviset p53- ja Ki-67-ekspressiot viittaavat huonoon ennusteeseen, mutta positiivinen COX-2 ekspressio viittaa suotuisaan ennusteeseen. Positiivinen COX-2- ja negatiivinen Ki-67-ekspressio yhdessä viittaavat parantuneeseen ennusteeseen metastasoituneessa munuaissyövässä.

Resíduos de agrotóxicos em alimentos: uma preocupação ambiental global - Um enfoque às maçãs

This paper describes the use of pesticides in agriculture. Research has shown that significant quantities of pesticide residues have been found in many types of foods. Thus, an overview is given of pesticide residue determinations in fruits and vegetables, with special attention to apples. The toxicity and the adverse effects possibly caused by the exposure of these compounds are alerting the scientific community to develop studies about the validation of analytical methods for multiresidue pesticide determination in these samples. This review shows that pesticide-residue determination in apples is becoming a very important and challenging issue.

Lipídios estruturados: alternativa para a produção de sucedâneos da gordura do leite humano

Human milk has characteristics of great importance for the newborn. Its composition shows all nutrients in quantity and quality needed, in addition to providing protection against infections and allergies and stimulating the immune system. Therefore, the composition of fatty acids and their distribution in the triacylglycerols are targets of studies on infant formula, and the triacylglycerols of human milk fat should serve as a model for the lipid components. This review aims to report studies of technology in lipids in order to produce structured lipids as substitutes of human milk fat.

Desenvolvimento de microcélula eletroquímica para estudos de microrregiões

The construction and optimization of a device that can be applied to electrochemical studies in flat micro regions are described. This was developed as an attempt to study small regions of metallic samples, whose properties may differ completely from its macroscopic behavior and for studies in highly resistive medium. Some results were obtained for individual grains of polycrystalline samples, welded regions, pure copper, platinum, glassy carbon, single crystals of Cu-Zn-Al alloy, and steel in biodiesel without electrolyte intentionally added. The device showed to be useful for the proposed purpose, allowing to be automated and has potential possibilities of other applications.

Explorando produtos naturais microbianos nas fronteiras da Química e da Biologia

The chemistry of natural products has been remarkably growing in the past few decades in Brazil. Aspects related to the isolation and identification of new natural products, as well as their biological activities, have been achieved in different laboratories working on this subject in the country. More recently, the introduction of new molecular biology tools has strongly influenced the research on natural products, mainly those produced by microorganisms, creating new possibilities to assess the chemical diversity of secondary metabolites. This paper describes some ideas on how the research on natural products can have a considerable input from molecular biology in the generation of chemical diversity. We also explore the role of microbial natural products in mediating interspecific interactions and their relevance to ecological studies. Examples of the generation of chemical diversity are highlighted by using genome mining, mutasynthesis, combinatorial biosynthesis, metagenomics, and synthetic biology, while some aspects of microbial ecology are also discussed. The idea to bring up this topic is linked to the remarkable development of molecular biology techniques to generate useful chemicals from different organisms. Here, we focus mainly on microorganisms, even though similar approaches have also been applied to the study of plants and other organisms. Investigations in the frontier of chemistry and biology require interactions between different areas, characterizing the interdisciplinarity of this research field. The necessity of a real integration of chemistry and biology is pivotal to finding correct answers to a number of biological phenomena. The use of molecular biology tools to generate chemical diversity and control biosynthetic pathways is largely explored in the production of important biologically active compounds. Finally, we briefly comment on the Brazilian organization of research in this area, the necessity of new strategies for the graduation programs, and the establishment of networks as a way of organization to overcome some of the problems faced in the area of natural products.

Simultaneous determination of four phenolic compounds in extracts of aerial parts of Ipomoea pes-caprae (L.) R. Br. (Convolvulaceae) by HPLC-UV

Among other applications, Ipomoea pes-caprae is popularly used to treat jellyfish stings, supporting the development of a product for dermatological use. Hydroethanolic spray-dried extract was chosen for the further development of phytomedicines, and a stability-indicative HPLC-UV method was developed and validated for the determination of isoquercitrin and isochlorogenic acids A, B and C. The method was developed using a C18 column (250 x 4.6 mm, 5 µm) with an acetonitrile:water mobile phase at pH 3.0 in a gradient run. The four constituents and other unidentified components of the extract were appropriately resolved without interference of degradation products after stress tests (acid, alkali, neutral, oxidant, photolysis). The method showed linearity in the isoquercitrin concentration range from 5.0-50.0 µg mL-1, with adequate precision (RSD% < 2.5% for the intra- and inter-day studies), accuracy (recovery of 100.0 ± 2.0%), and robustness. Both the herbal drug and spray-dried extract of I. pes-caprae were subjected to stability studies in accelerated and long-term conditions over four months. The samples maintained their characteristics and marker contents (< 10% of variation).

Rahoitustuotteen asiakaskannattavuusanalyysi - Case: X Oy

Tutkimuksen tavoitteena on suorittaa asiakaskannattavuusanalyysi rahoitustoimialalla toimivan yrityksen erikseen määritetylle asiakasryhmälle. Toisena tavoitteena on tulosten avulla pyrkiä tunnistamaan tekijät, jotka tekevät asiakkuudesta kannattamattoman kohdeorganisaatiossa ja pyrkiä löytämään ratkaisuvaihtoehtoja epäsuotuisten tekijöiden poistamiseksi. Teoreettinen viitekehys rakentuu pääasiallisesti toimintolaskennasta sekä asiakaskannattavuuden analysoimisesta kirjoitettuun kirjallisuuteen sekä aiheista tehtyihin tutkimuksiin. Toimintolaskenta on monien tutkimusten mukaan käytännöllinen apuväline asiakaskohtaisten kustannusten määrittämisessä. Sitä käytetään apuvälineenä kannattavuusanalyysia tehtäessä. Tutkimustuloksista selviää, että kohdeyrityksessä asiakaskohtaiset kannattavuudet eivät ole täysin odotusten mukaisia. Johtopäätöksenä voidaan esittää, että kohdeyrityksessä ei suuri asiakaskohtainen luottokanta pelkästään takaa hyvää asiakkaan kokonaiskannattavuutta.

Virtuaalitekniikoiden ja riskianalyysin käyttö kivenmurskainten tuotekehityksessä

Tässä työssä keskitytään Metso Mineralsin valmistamien tuotteiden suunnitteluympäristöön ja erityisesti sen kehittämismahdollisuuksiin uusien teknologioiden avulla. Käyttövarmuuden parantamiseksi yksi potentiaalisimmista keinoista on parantaa laitteiden huollettavuutta. Tyypillisesti huollettavuuden verifiointi tapahtuu vasta prototyyppien testauksessa työmaaolosuhteissa, jolloin havaittujen ongelmien muuttaminen on hankalaa. Siksi huollettavuuteen tulisi kiinnittää enemmän huomiota jo tuotekehitysvaiheessa. Tässä työssä selvitetään virtuaalitekniikoiden tarjoamia mahdollisuuksia em. asioiden parantamiseksi. Työn toisena osakokonaisuutena tutkitaan riskianalyysien kehittämismahdollisuuksia. Tavoitteena on kehittää toimiva menetelmä riskianalyysin suorittamiseen virtuaaliprototyyppien avulla ja testata kaupallisten riskianalyysiin tarkoitettujen sovellusten käyttöä. Lopuksi tarkastellaan vielä uusien menetelmien integrointia osaksi tuotekehitysprosessia. Tehtyjen Case-tutkimusten perusteella havaittiin, että virtuaaliympäristöjen ja -tekniikoiden avulla saavutetaan hyötyä tuotekehityksen varhaisessa vaiheessa. Kyselytutkimuksesta saadun palautteen perusteella virtuaalitekniikoiden sovelluksille annettiin asteikolla 1–5 yleisarvosanaksi keskimäärin kolme. Virtuaalitekniikoiden ja riskianalyysien yhteiskäyttöä testattiin onnistuneesti, mutta tämä vaatii vielä kehittämistä.

External knowledge transfer mechanisms in service business acquisition

In knowledge-intensive economy an effective knowledge transfer is a part of the firm’s strategy to achieve a competitive advantage in the market. Knowledge transfer related to a variety of mechanisms depends on the nature of knowledge and context. The topic is, however, very little empirical studied and there is a research gap in scientific literature. This study examined and analyzed external knowledge transfer mechanisms in service business and especially in the context of acquisitions. The aim was to find out what kind of mechanisms was used when the buyer began to transfer data e.g. their own agendas and practices to the purchased units. Another major research goal was to identify the critical factors which contributed to knowledge transfer through different mechanisms. The study was conducted as a multiple-case study in a consultative service business company, in its four business units acquired by acquisition, in various parts of the country. The empirical part of the study was carried out as focus group interviews in each unit, and the data were analyzed using qualitative methods. The main findings of this study were firstly the nine different knowledge transfer mechanisms in service business acquisition: acquisition management team as an initiator, unit manager as a translator, formal training, self-directed learning, rooming-in, IT systems implementation, customer relationship management, codified database and ecommunication. The used mechanisms brought up several aspects as giving the face to changing, security of receiving right knowledge and correctly interpreted we-ness atmosphere, and orientation to use more consultative touch with customers. The study pointed out seven critical factors contributed to different mechanisms: absorption, motivation, organizational learning, social interaction, trust, interpretation and time resource. The two last mentioned were new findings compared to previous studies. Each of the mechanisms and the related critical factors contributed in different ways to the activity in different units after the acquisition. The role of knowledge management strategy was the most significant managerial contribution of the study. Phenomenon is not recognized enough although it is strongly linked in knowledge based companies. The recognition would help to develop a better understanding of the business through acquisitions, especially in situations such as where two different knowledge strategies combines in new common company.

Vaihtosuuntaajan reaaliaikainen lämpömalli

Vaihtosuuntaajan IGBT-moduulin liitosten lämpötiloja ei voida suoraan mitata, joten niiden arviointiin tarvitaan reaaliaikainen lämpömalli. Tässä työssä on tavoitteena kehittää tähän tarkoitukseen C-kielellä implementoitu ratkaisu, joka on riittävän tarkka ja samalla mahdollisimman laskennallisesti tehokas. Ohjelmallisen toteutuksen täytyy myös sopia erilaisille moduulityypeille ja sen on tarvittaessa otettava huomioon saman moduulin muiden sirujen lämmittävä vaikutus toisiinsa. Kirjallisuuskatsauksen perusteella valitaan olemassa olevista lämpömalleista käytännön toteutuksen pohjaksi lämpöimpedanssimatriisiin perustuva malli. Lämpöimpedanssimatriisista tehdään Simulink-ohjelmalla s-tason simulointimalli, jota käytetään referenssinä muun muassa implementoinnin tarkkuuden verifiointiin. Lämpömalli tarvitsee tiedon vaihtosuuntaajan häviöistä, joten työssä on selvitetty eri vaihtoehtoja häviölaskentaan. Lämpömallin kehittäminen s-tason mallista valmiiksi C-kieliseksi koodiksi on kuvattu tarkasti. Ensin s-tason malli diskretoidaan z-tasoon. Z-tason siirtofunktiot muutetaan puolestaan ensimmäisen kertaluvun differenssiyhtälöiksi. Työssä kehitetty monen aikatason lämpömalli saadaan jakamalla ensimmäisen kertaluvun differenssiyhtälöt eri aikatasoille suoritettavaksi sen mukaan, mikä niiden kuvaileman termin vaatima päivitysnopeus on. Tällainen toteutus voi parhaimmillaan kuluttaa alle viidesosan kellojaksoja verrattuna suoraviivaiseen yhden aikatason toteutukseen. Implementoinnin tarkkuus on hyvä. Implementoinnin vaatimia suoritusaikoja testattiin Texas Instrumentsin TMS320C6727- prosessorilla (300 MHz). Esimerkkimallin laskemisen määritettiin kuluttavan vaihtosuuntaajan toimiessa 5 kHz kytkentätaajuudella vain 0,4 % prosessorin kellojaksoista. Toteutuksen tarkkuus ja laskentakapasiteetin vähäinen vaatimus mahdollistavat lämpömallin käyttämisen lämpösuojaukseen ja lisäämisen osaksi muuta jo prosessorilla olemassa olevaa systeemiä.

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

Upconverting Phosphor Technology: Exceptional Photoluminescent Properties Light Up Homogeneous Bioanalytical Assays

The aim of the present study was to demonstrate the wide applicability of the novel photoluminescent labels called upconverting phosphors (UCPs) in proximity-based bioanalytical assays. The exceptional features of the lanthanide-doped inorganic UCP compounds stem from their capability for photon upconversion resulting in anti-Stokes photoluminescence at visible wavelengths under near-infrared (NIR) excitation. Major limitations related to conventional photoluminescent labels are avoided, rendering the UCPs a competitive next-generation label technology. First, the background luminescence is minimized due to total elimination of autofluorescence. Consequently, improvements in detectability are expected. Second, at the long wavelengths (>600 nm) used for exciting and detecting the UCPs, the transmittance of sample matrixes is significantly greater in comparison with shorter wavelengths. Colored samples are no longer an obstacle to the luminescence measurement, and more flexibility is allowed even in homogeneous assay concepts, where the sample matrix remains present during the entire analysis procedure, including label detection. To transform a UCP particle into a biocompatible label suitable for bioanalytical assays, it must be colloidal in an aqueous environment and covered with biomolecules capable of recognizing the analyte molecule. At the beginning of this study, only UCP bulk material was available, and it was necessary to process the material to submicrometer-sized particles prior to use. Later, the ground UCPs, with irregular shape, wide size-distribution and heterogeneous luminescence properties, were substituted by a smaller-sized spherical UCP material. The surface functionalization of the UCPs was realized by producing a thin hydrophilic coating. Polymer adsorption on the UCP surface is a simple way to introduce functional groups for bioconjugation purposes, but possible stability issues encouraged us to optimize an optional silica-encapsulation method which produces a coating that is not detached in storage or assay conditions. An extremely thin monolayer around the UCPs was pursued due to their intended use as short-distance energy donors, and much attention was paid to controlling the thickness of the coating. The performance of the UCP technology was evaluated in three different homogeneous resonance energy transfer-based bioanalytical assays: a competitive ligand binding assay, a hybridization assay for nucleic acid detection and an enzyme activity assay. To complete the list, a competitive immunoassay has been published previously. Our systematic investigation showed that a nonradiative energy transfer mechanism is indeed involved, when a UCP and an acceptor fluorophore are brought into close proximity in aqueous suspension. This process is the basis for the above-mentioned homogeneous assays, in which the distance between the fluorescent species depends on a specific biomolecular binding event. According to the studies, the submicrometer-sized UCP labels allow versatile proximity-based bioanalysis with low detection limits (a low-nanomolar concentration for biotin, 0.01 U for benzonase enzyme, 0.35 nM for target DNA sequence).