Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Asymmetric synthesis of benzylic and heterobenzylic amines

C2-Symmetrical, enantiopure 2,6-di[1-(1-aziridinyl)alkyl]pyridines (DIAZAPs) were prepared by a high-yielding, three-step sequence starting from 2,6-pyridinedicarbaldehyde and (S)-valinol or (S)-phenylglycinol. The new compounds were tested as ligands in palladium-catalyzed allylation of carbanions in different solvents. Almost quantitative yield and up to 99% enantiomeric excess were obtained in the reactions of the enolates derived from malonate, phenyl- and benzylmalonate dimethyl esters with 1,3-diphenyl-2-propenyl ethyl carbonate. Asymmetric synthesis of 2-(2-pyridyl)aziridines from chiral 2-pyridineimines bearing a stereogenic center at the nitrogen atom was development. The envisioned route involves the addition of chloromethyllithium to the imine derived from 2-pyridinealdehyde and (S)-valinol, protected as O-trimethylsilyl ether. The analogous reaction performed on the imine derived from (S)-valine methyl ester gave the product containing the aziridine ring as well as the α-chloro ketone group coming from the attack of chloromethyllithium to the ester function. Other stereogenic alkyl substituents at nitrogen gave less satisfactory results. Moreover, the aziridination protocol did not work on other aromatic imines, e.g. 3-pyridineimine and benzaldimine, which are not capable of bidentate chelation. The N-substituent could not be removed, but aziridine underwent ring-opening by attack of nitrogen, sulfur, and oxygen nucleophiles. Complete or prevalent regioselectivity was obtained using cerium trichloride heptahydrate as a catalyst. In some cases, the N-substituent could be removed by an oxidative protocol. The addition of organometallic (lithium, magnesium, zinc) reagents to 2-pyrroleimines derived from (S)-valinol and (S)-phenylglycinol gave the N-substituted-1-(2-pyrrolyl)alkylamines with high yields and diastereoselectivities. The (S,S)-diastereomers were useful intermediates for the preparation of enantiopure 1-[1-(2-pyrrolyl)alkyl]aziridines by routine cyclization of the β-aminoalcohol moiety and of (S)-N-benzoyl 1-[1-(2-pyrrolyl)alkyl]amines and their N-substituted derivatives by oxidative cleavage of the chiral auxiliary. 1-Allyl-2-pyrroleimines obtained from (S)-phenylglycinol and (S)-valinol underwent highly diastereoselective addition of allylmetal reagents, used in excess amounts, to give the corresponding secondary amines with concomitant allyl to 1-propenyl isomerisation of the 1-pyrrole substituent. Protection of the 2-aminoalcohol moiety as oxazolidinone, amide or Boc derivate followed by ring closing metathesis of the alkene groups gave the unsaturated bicyclic compound, whose hydrogenation afforded the indolizidine derivative as a mixture of separable diastereomers. The absolute configuration of the main diastereomer was assessed by X-ray crystallographic analysis.

Nuovi catalizzatori per l'idrogenazione, l'idrogenolisi/ring-opening di composti aromatici policiclici

The removal of aromatic hydrocarbons from diesel has received considerable attention after environmental regulations that require petroleum refiners to raise cetane number and to limit aromatics in diesel fuel in order to improve combustion efficiency and reduce particulate and NOx emissions. An alternative is blending with Fischer–Tropsch (FT) gas-to-liquid diesel fuel; however, this option may not be economically viable solution in case of extensive blend. Another alternative is to incorporate in the diesel pool a greater fraction of the so-called light cycle oil (LCO). Due to its high aromatics content and its low cetane number (typically between 20 and 30), the incorporation of LCO may have a negative impact on the quality of diesel. Current technologies for LCO improvement are based on hydrogenation to adjust both sulphur and cetane number but while an important fraction of the aromatics present in LCO can be saturated in a deep hydrogenation process, the cetane number may still be lower than the target values specified in diesel legislations, so further upgrading is needed. An interesting technology for improving the cetane number of diesels and maintaining meanwhile high diesel yields is achieved by combining a complete hydrogenation process with a selective ring opening (SRO) reaction of the naphthenic rings. The SRO can be defined as naphthene ring-opening to form compounds with high cetane number, but without any carbon losses. Controlling the interconversion of six- and five- membered rings via an acid-catalyzed ring-contraction step is also of great importance, since selective conversion of six-membered to five-membered naphthene rings greatly influences ring-opening rates and selectivity. High intrinsic activity may be enhanced by deposition of noble metals on acidic, high surface area supports, because it is possible to arrange close proximity of the metal and acid sites. Moreover, in large-pore supports, the diffusion resistance of liquid reactants into the pores is minimized. In addition to metal centres, the acid sites of support also plays role in aromatics hydrogenation. However, the functions of different kinds of acid sites (Brønsted vs. Lewis acidity), and their optimal concentrations and strengths, remain unclear. In the present study we investigated the upgrading of an aromatic-rich feedstock over different type of metal supported on mesoporous silica-alumina. The selective hydrogenolysis and ring opening of tetrahydronaphthalene (THN or tetralin) was carried out as representative of LCO fractions after deep hydrogenation process. In this regards the aim of this study is to evaluate both the effect of metals and that of the supports characterized by different acid distribution and strength, on conversion and selectivity. For this purpose a series of catalysts were prepared by impregnation. The catalysts were characterized and conversion tests of THN were performed in a lab-scale plant operating in the pressure range from 7.0-5.0 MPa and in the temperature range from 300 to 360°C.

Mg for hydrogen storage: synthesis, nanostructure and thermodynamics properties

Nowadays alternative energies are an extremely important topic and the possibility of using hydrogen as an energy carrier must be explored. Many problems infer the technological application of this abundant and powerful resource, one of them the possibility of storage. In the framework of suitable materials for hydrogen storage, magnesium has been the center of this study because it is cheap and the amount of stored hydrogen that it achieves (7.6 wt%) is extremely appealing. Nanostructure helps to overcome the slow hydrogen diffusion and the functionalization of surfaces with transition metals or oxides favors the hydrogen molecule dissociation/recombination. The aim of this research is the investigation of the metal-hydride transformation in magnesium nanoparticles synthesized by inert-gas condensation, exploiting the fact that they are a simple model system. The so produced nanostructured powder has been analyzed in response to nanoparticles surface functionalization by transition metal clusters, specifically palladium, nickel and titanium, chosen on the basis of their completely different Mg-related phase diagrams. The role of the intermetallic phases formed upon heating and hydrogenation treatments will be presented to provide a comprehensive picture of hydrogen sorption in this class of nanostructured storage materials.

Idrogenazione selettiva del 5-idrossimetilfurfurale in fase omogenea: studio dell'attività catalitica del complesso di Shvo

Il presente lavoro di tesi è frutto di una collaborazione fra il Dipartimento di Chimica Fisica ed Inorganica (gruppo del Prof. Valerio Zanotti – Mattia Vaccari, Dr. Rita Mazzoni) ed il Dipartimento di Chimica Industriale e dei Materiali (gruppo del Prof. Angelo Vaccari – Dr. Thomas Pasini, Dr. Stefania Albonetti, Prof. Fabrizio Cavani) e si inserisce il un progetto volto a valutare l’attività e la selettività del catalizzatore di idrogenazione di Shvo 1, verso l’idrogenazione selettiva del doppio legame polare del 5-idrossimetilfurfurale (HMF) in fase omogenea. L’HMF è un composto di natura organica facilmente ottenibile dalle biomasse, il quale può essere impiegato come building block per ottenere prodotti ad alto valore aggiunto per la chimica fine o additivi per biocarburanti aventi un elevato potere calorifico. In particolare la nostra attenzione si è rivolta alla produzione del 2,5-diidrossimetilfurano (BHMF), un importante building block per la produzione di polimeri e schiume poliuretaniche. Il lavoro di tesi da me svolto ha riguardato la messa a punto di una nuova metodologia sintetica per la preparazione del catalizzatore di Shvo e lo studio della sua attività catalitica nella riduzione di HMF a BHMF. Il comportamento del catalizzatore è stato monitorato studiando la resa in BHMF in funzione di tutti i parametri di reazione: temperatura, pressione di H2, solvente, rapporto molare substrato/catalizzatore, concentrazione, tempo. Successivamente è stata valutata la possibilità di riciclare il catalizzatore recuperando il prodotto di estrazione con acqua, per precipitazione o eseguendo la reazione in miscela bifasica (toluene/H2O). The present work is a collaboration between the Department of Physics and Inorganic Chemistry (group of Prof. Valerio Zanotti - Mattia Vaccari, Dr. Rita Mazzoni) and the Department of Industrial Chemistry and Materials (Group of Prof. Angelo Vaccari - Dr. Thomas Pasini, Dr. Stefania Albonetti, Prof. Fabrizio Cavani), and it’s a project devoted to evaluate the activity and selectivity of the Shvo catalyst, in the selective hydrogenation of polar double bond of 5 -hydroxymethylfurfural (HMF) in homogeneous phase. The HMF is an organic compound easily obtained from biomass, which can be used as a building block for fine chemicals abd polymer production or additives for biofuels with a high calorific value. In particular, our attention turned to the production of 2.5-bishydroxymethylfuran (BHMF), an important building block for the production of polymers and polyurethane foams. This thesis has involved the development of a new synthetic methodology for the preparation of Shvo’s catalyst and the study of its catalytic activity in the reduction of HMF to BHMF. The behavior of the catalyst was monitored by studying the yield in BHMF as a function of all the reaction parameters: temperature, pressure of H2, solvent, substrate to catalyst molar ratio, concentration, time. Subsequently it was evaluated the possibility of recycling the catalyst recovering the product of extraction with water, by precipitation or performing the reaction in biphasic mixture (toluene/H2O).

Self-assembly of Tetraurea Calix[4]arenes

We have elaborated a multistep strategy to synthesize ABAB-type tetraureas. There are overall nine steps but they involve very simple chemistry. The sequence starts with a 1,3-dialkylation and this is the step in which a difference between distal phenolic units is introduced. The selective ipso-nitration in the next step is based on the difference in reactivity between free phenolic units and alkylated ones. The direct reaction of tetraamino calixarene with tolylisocyanate appears not to be an appropriate method to synthesize 1,3-ditolylurea calixarenes but can be used to get tetraureas of ABBB- and AABB-types in two steps with yields of about 60%. A complete regioselective dimerization was obtained with mono-loop derivatives in which two adjacent urea residues are covalently connected. As predicted/expected the loop prevents the formation of one regioisomer, and only the dimer in which the open-chain residue slips through the loop is formed. To synthesize mono-loop tetraureas 1,2-diBoc protected tetraamino calixarene was acylated with activated di-urethanes under high dilution conditions. Di-loop compounds were synthesized by two different ways. In the reaction of tetraamine and di-urethanes the yield is about 30-40%. The second method is based on the metathesis reaction within a suitable heterodimer. For this strategy, tetraurea derivatives with residues which have terminal double bonds were prepared. The exclusive formation of the heterodimer with tetratosylurea as template is the key point in this strategy. Metathesis followed by hydrogenation give exceptionally good yields (> 80%) of the loop compounds. All the NMR data for di-loop compounds confirm that the loops prevent the interaction of the urea residues which are connected and thus, as expected, the di-loop derivatives do not form homodimers. The heterodimer between di-loop compounds and tetratolylurea (open-chain tetraureas) was the only species observed for a 1:1 mixture in benzene or chloroform. The rational synthesis of bis-[2]catenanes was a consequence of the selective formation of one regioisomer of mono-loop derivatives and the exclusive formation of heterodimers by di-loop derivatives. The formation of interlocking-ring in the synthesis of bis-[2]catenanes is an additional evidence that one open-chain residue slips through the loop in mono- or di-loop derivatives. Exceptionally good yields in the synthesis of bis-[2]catenanes are due to the high preorganization in the dimer which undergoes the metathesis. This preorganization decreases the number of the wrong connections and favors the new connections to be formed. Although the procedure for working up the reaction mixture should be still improved, these results are promising. A C2-symmetrical bis-[2]catenane was successfully resolved by column chromatography using a chiral stationary phase. Thus it should be possible to separate a larger amount to obtain pure enantiomers for further studies.

Die 18 F-Fluorierung verschiedener Aminosäuren als Tracer für die Tumor-Diagnostik mittels Positronen-Emissions-Tomographie

Die Zielsetzung dieser Arbeit war die Synthese und Markierung, sowie die in vitro- und in vivo-Evaluierung zweier markierter Aminosäure. Es wurden die PET-Tumor-Tracer C1-(2-[18F]Fluoreth- ylamino)-asparagin und S-2-Amino-4-[18F]fluor-butansäure synthetisiert. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde mit 2-[18F]Fluorethylamin als Precursor durchgeführt. Ausgehend von N,N-Dibenzyl-(2-bromethyl)-amin wurde zunächst N,N-Dibenzyl-(2-[18F]fluorethyl)-amin in einer nukleophilen Substiution mit [18F]Fluorid in Acetonitril bei 80 °C mit einer Reaktionsdauer von 5 min dargestellt. Zur Abtrennung überschüssigen [18F]Fluorids wurde das Roh-Produkt auf einer Sep-Pak Plus Kartusche (C18) fixiert und mit Acetonitril eluiert. Die Abspaltung der Benzyl-Schutzgruppen erfolgte durch die Zugabe von Pd/C zu dem eluierten N,N-Dibenzyl-(2-[18F]fluorethyl)-amin und Behandelung der Lösung im leichten Wasserstoffstrom. Im finalen Aufreinigungsschritt wird der Katalysator Pd/C mittels eines Membranfilters abgetrennt. Das 2-[18F]Fluorethylamin wird im Sauren in das Amino-Salz überführt und im Vakuum vom Lösungsmittel befreit. Die Markierung zum C1-(2-[18F]Fluorethylamino)-asparagin wurde in DMF durchgeführt. Die höchsten Ausbeuten werden nach 4 min bei 60 °C erhalten. Die Abspaltung der Schutzgruppe erfolgt durch Trifluoressigsäure bei Raumtemperatur in 8 min. Die Aufreinigung des C1-(2-[18F]Fluorethylamino)-asparagin mittels HPLC und Festphasenextraktion liegt das Produkt in einer isotonischne isotonischen Kochsalzlösung vor. Die in vitro-Versuche wurden mit C1-(2-[18F]Fluorethylamino)-asparagin an 5 verschiedenen Zelllinen durchgeführt, 3 Plattenepitele und 2 Melanome. Hierbei konnte eine erhöhte Akkumulation von C1 -(2-[18F]Fluorethylamino)-asparagin beobachtet werden, die innerhalb von 20 min einen konstanten Wert erreicht. Ein Blockade-Experiment zeigte, dass sich die Aufnahme von C1 -(2-[18F]Fluorethylamino)-asparagin durch gesättinge Asparagin-Lösung bei den Plattenepitelen gar nicht und bei den Melanomen nur leicht vermindern ließ. Da die Aufnahme von C1-(2-[18F]Fluorethylamino)-asparagin in die Zellen höher war als bei FDG bei dem gleichen Versuchsaufbau, wurden in vivo-Versuche angesetzt. Die in vivo-Versuche an Sprague Dawley Ratten mit C1-(2-[18 F]Fluorethylamino)-asparagin zeigten keine messbare Anreicherung von C1-(2-[18F]Fluorethylamino)-asparagin in Tumoren. Fast die komplette Aktivität wurde in der Niere und Blase wiedergefunden. Die Synthese von S-2-Amino-4-[18F]fluor-butansäure wurde über stereodirigierende Auxilliare realisiert. Dazu wurden die geeignetsten Auxillare ausgewählt und auf ihre Eignung verglichen. Der Vergleich der stereodirigierenden Auxilare zeigte, dass das (1R,2R,5R)-2-Hydroxy-2,6,6-trimethyl- bicyclo[3.1.1]hept-3-ylidenamino)-essigsäure tert.-butylester (Laue-Auxillar) am geeignetesten ist. Die 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure wurde so optimiert, dass eine möglichst hohe stereochemische Reinheit des Produktes erzielt wird. Die optische Reinheit von S-2-Amino-4-[18 F]fluor-butansäure wurde mit > 93 % ee berechnet. Die Synthese des Markierungsvorläufers wurde ausgehend vom Laue-Auxilliar aufgebaut. Als Abgangsgruppe hat sich die Tosylgruppe besonders bewährt. Sie lässt sich unter besonders schonenden Bedingungen in den säurelabilen (1R,2R,5R)-4-Hydroxy-2-(2-hydroxy-2,6,6-trimethyl-bi- cyclo[3.1.1]hept-3-ylidenamino) butansäure tert.-butylester einführen. Bei der 18F-Markierung von S-2-Amino-4-[18F]fluor-butansäure mittels n.c.a. [18F]Fluorid hat sich die Wahl des Basensystems als besonders wichtig erwiesen. Die maximale Ausbeuten von 55% wurde mit Oxalat als Basensystem in Acetonitril bei 80 °C und einer Reaktionszeit von 15 min erzielen. Die Abspaltung der Schutzgruppen und die Abtrennung des Produktes wird in mehreren Schritten durchgeführt einschließlich einer HPLC-Abtrennung. Es wird nach 150 min Synthesedauer das gereinigte S-2-Amino-4-[18F]fluor-butansäure in isotonischer Kochsalzlösung mit einer Ausbeute von > 10 % RCA erhalten. Bei in vivo-Versuchen an Sprague Dawley Ratten reicherte sich der Hauptteil der Aktivität in der Niere an und nur weniger als ein halbes Prozent der applizierten Aktivität fand sich in den Tumoren wieder. Nach 10 min wurde ein maximaler Wert erreicht, der sich bis zum Ende der Messung nicht verändert. Das Verhältnis von Tumoraktivität zu unspezifisch-gebundener Aktivität betrug 2,2. Damit liegt das Verhältnis im Bereich der meisten klinisch eingesetzten PET-Tumor-Tracer wie dem des O-(2-[18F]Fluorethyl)-L-tyrosin mit 1,5.

Numerical study of graphene as a channel material for field-effect transistors

Graphene excellent properties make it a promising candidate for building future nanoelectronic devices. Nevertheless, the absence of an energy gap is an open problem for the transistor application. In this thesis, graphene nanoribbons and pattern-hydrogenated graphene, two alternatives for inducing an energy gap in graphene, are investigated by means of numerical simulations. A tight-binding NEGF code is developed for the simulation of GNR-FETs. To speed up the simulations, the non-parabolic effective mass model and the mode-space tight-binding method are developed. The code is used for simulation studies of both conventional and tunneling FETs. The simulations show the great potential of conventional narrow GNR-FETs, but highlight at the same time the leakage problems in the off-state due to various tunneling mechanisms. The leakage problems become more severe as the width of the devices is made larger, and thus the band gap smaller, resulting in a poor on/off current ratio. The tunneling FET architecture can partially solve these problems thanks to the improved subthreshold slope; however, it is also shown that edge roughness, unless well controlled, can have a detrimental effect in the off-state performance. In the second part of this thesis, pattern-hydrogenated graphene is simulated by means of a tight-binding model. A realistic model for patterned hydrogenation, including disorder, is developed. The model is validated by direct comparison of the momentum-energy resolved density of states with the experimental angle-resolved photoemission spectroscopy. The scaling of the energy gap and the localization length on the parameters defining the pattern geometry is also presented. The results suggest that a substantial transport gap can be attainable with experimentally achievable hydrogen concentration.

Extended arm polyphenylene dendrimers

In order to eliminate the de Gennes packing problem, which usually limits the attainable size of dendrimers, a new branching unit containing para-tetraphenylene ethynyl arms has been synthesized and utilized in the preparation of dendrimers of the Müllen type. The divergent principle of synthesis, based on the Dilthey reaction, could be carried up to sixth generation which contains 2776 benzene rings and possesses a diameter in the 27 nm range ("exploded dendrimer"). Monodispersity and dimensions of this and the lower generation species have been studied by MALDI-TOF MS (including the very recent superconducting tunnel junction detector), by size-exclusion chromatography, dynamic light scattering, transmission electron microscopy, and atomic force microscopy. Interesting features, apart from the huge dimension, are the low density and high porosity of these giant molecules which cause extensive aggregation in the gas phase, flattening on solid support (AFM) and the ready incorporation of guest molecules in the condensed phase. Since the synthesis of the para-tetraphenylene arms is quite elaborate, similar dendrimers containing para-terphenylene arms have been prepared; they are accessible more economically ("semi-exploded dendrimers"). It has been shown that they in several aspects mimic the features of the "exploded dendrimers". In order to take advantage of the presence of large internal cavities in this dendrimer type, dendrons containing -C≡C- triple bonds have also been incorporated. Surprisingly, they are readily hydrogenated under the condition of heterogeneous catalysis (Pd/C) which demonstrates the large size of the cavities. As revealed by a quartz microbalance study the post-hydrogenation dendrimers are less prone to incorporate guest molecules than before hydrogenation. Obviously, the more flexible nature of the former reduces porosity, it also leads to significant shrinkage. An interesting perspective is the use of homogeneous hydrogenation catalysts of variable size with the aim of determining the dimension of internal free space.

Synthese von optisch aktivem 9,14-Methylen-Lipoxin A 4

In der vorliegenden Arbeit wurde die Synthese von optisch aktivem 9,14-Methylen-Lipoxin A4 untersucht. Lipoxin A4 und seine Derivate leiten sich von der Arachidonsäurekaskade ab wie die Prostaglandine, Prostacycline, Thromboxana und Leucotriene. Alle diese Verbindungen sind biologisch aktive Eicosanoide, die aus 20 C-Atomen bestehen. Lipoxine können im Organismus auf verschiedenen Biosynthesewegen entstehen: über die Lipoxygenase sowie über die Zell-Zell-Wechselwirkungen. Untersuchungen ergaben, dass die Lipoxine selektive biologische Wirkungen zeigen, die eine wichtige Rolle vor allem in Entzündungsprozessen und Infektabwehr zeigen. Da aber diese Moleküle rasch isomerisieren, sind diese hohen Aktivitäten mit einer sehr geringen Stabilität gekoppelt. Aufgrund dieser Instabilität konnte die biologisch aktive Konformation des Lipoxin A4 am Rezeptor nicht eindeutig bestimmt werden. Zur besseren Untersuchung der Lipoxinrezeptor-Anordnung wurden deshalb stabile Analoga synthetisiert. Die biologische Aktivität des nach Nokami et al hergestellten Lipoxin A4-Analogons weicht sehr stark von der des Lipoxins ab. Angeregt durch diese Arbeiten wurde in der Arbeitsgruppe Nubbemeyer die Idee entwickelt, das konjugierte Tetraensystem des Lipoxin A4-Moleküls durch das Cycloheptatrien nachzuahmen. Die CH2-Gruppe bildet eine Brücke, die die Isomerisierung vom aktiven cis-Isomer zu den inaktiven trans-Isomeren verhindern soll. Mit diesem Cycloheptatriengerüst als Lipoxin A4-Analogon hoffen wir das Lipoxingerüst unwesentlich zu verändern und die damit verbundene biologische Aktivität zu erhalten. Die Synthese des 9,14-Methylen-LXA4 soll möglichst konvergent erfolgen, so dass gegebenenfalls auf Bausteine zurückgegriffen werden kann, deren Aufbau bereits optimiert wurde. Eine derartige Strategie ermöglicht darüber hinaus die Herstellung einer großen Zahl von weiteren potentiell interessanten Verbindungen ohne komplettes Umstellen der Synthese. Wichtige Reaktionen im Verlauf dieser Synthese sind: bei der Synthese des C8-C20-Bausteins: Friedel-Crafts-Acylierungen, Haloform-Reaktion, Veresterung mittels Standardmethoden, enantioselektive Reduktion mit dem chiralen CBS-Katalysator und Schutzgruppenoperation. bei der Synthese des C1-C7-Bausteins: ex-chiral-pool-Synthese aus 2-Desoxy-D-ribose, Wittig-Reaktion, Hydrierung mit Pd/C, Schutzgruppenoperation, Abspaltung von Schutzgruppen und Swern-Oxidation zum Aldehyd. Die Schlüsselreaktion der ganzen Synthese ist die Eintopf-Variante der Julia-Olefinierung nach Kocienski: selektiver Aufbau des trans-Olefins durch Verknüpfung der beiden Bausteine. Nach weiteren Schutzgruppenoperationen (und Öffnung des Valerolactons) wird der Methylester des 9,14-Lipoxin A4 erhalten, dessen biologische Aktivität zweifelsfrei bewiesen wurde.

1,2-Additionen deprotonierter Alpha-Aminonitrile: Umgepolte Imine als vielseitige Synthesebausteine

Von aromatischen Aldehyden abgeleitete α-Aminonitrile können ohne die Anwendung von Schutzgruppen in α-Position deprotoniert werden, wenn keine lithiumhaltigen Basen verwendet werden. Ziel der vorliegenden Arbeit war es, die Reaktionen deprotonierter α-Aminonitrile mit Elektrophilen zu untersuchen. Die Addition von α-Aminocarbanionen an Imine führt unter intramolekularer Eliminierung von HCN zu Endiaminen, die sich in einer Eintopfsynthese abhängig von der Aufarbeitung in 1,2-Diamine oder 1,2-Diimine umwandeln lassen. Die nach Oxidation durch Luftsauerstoff erhaltenen Diimine können mit dem Reduktionsmittel BH3·THF diastereoselektiv reduziert werden. Es hat sich hier gezeigt, dass durch Zugabe einer katalytischen Menge an NaBH4 hauptsächlich die syn-Diamine erhalten werden, der Zusatz von Phthalsäure wiederum liefert bevorzugt die anti-Produkte. In beiden Fällen wird das Produkt in quantitativer Ausbeute erhalten. So konnte also eine effektive diastereoselektive Reduktionsmethode entwickelt werden, die eine freie Wahl der syn- oder anti-Konfiguration ermöglicht. Um enantiomerenreine 1,2-Diamine zu erhalten, wurden verschiedene Methoden getestet. Sowohl auxiliargesteuerte Synthesen mit einem N-Glycosyl-Aminonitril oder mit chiralen Sulfinyliminen als auch die Reduktion durch chirale Borverbindungen (CBS-Katalysatoren, Triacyloxyborhydrid oder Diisopinocamphenylboran), Transferhydrierungen mit chiralen Difluortitanocen-, Noyori- oder Organophosphat-Katalysatoren sowie enantioselektive Hydrierungen mit chiralen Übergangsmetall-katalysatoren waren jedoch nicht erfolgreich. Die Umsetzung der 1,2-Diimine mit Chlormethylethern oder -estern liefert die entsprechenden unsymmetrischen Imidazoliumsalze. Diese konnten zu N-heterocyclischen Carbenen deprotoniert und erfolgreich als Liganden in Suzuki- und Heck-Reaktionen eingesetzt werden. Durch die 1,2-Addition α-deprotonierter Streckerprodukte und anschließende Reduktion im Eintopfverfahren konnten 1,2-Aminoalkohole in mäßigen bis guten Ausbeuten dargestellt werden. Die Umsetzung von α-Aminocarbanionen mit N-Acyliminen erlaubt zudem die Synthese tetrasubstituierter Imidazole und trisubstituierter Oxazole in drei beziehungsweise vier Stufen: Die zunächst gebildeten α-Amino-α-acylaminopropionitrile können isoliert und in Gegenwart von Base einer Retro-Strecker-Reaktion unterworfen werden. Abhängig vom Substitutionsmuster schließt sich in manchen Fällen nach der Eliminierung von HCN direkt die Cyclisierung zum Imidazol an. Nicht cyclisierte Intermediate lassen sich durch Dehydratisierung mit PCl5 zu Imidazolen umsetzen, aber auch unter sauren Bedingungen zu α-Acylaminoketonen hydrolysieren, welche wiederum durch Einwirkung von PCl5 in Oxazole überführt werden können. Auf diese Weise wurden Imidazole und Oxazole in moderaten bis hohen Gesamtausbeuten hergestellt.

New methods for the functionalization of metathesis polymers

Two general strategies for the functionalization of metathesis polymers are presented in this dissertation. Introducing Sacrificial Synthesis, many of the limitations of ruthenium-catalyzed ROMP have been overcome. Here, the living ROMP polymer to be functionalized was turned into a diblock copolymer by polymerizing dioxepine monomers onto the desired first polymer block. The second block was then later removed to leave “half-a-dioxepin”, i.e. exactly one hydroxyl group, at the chain-end. The efficiency of Sacrificial Synthesis is also studied. Thiol groups were also placed by a sacrificial strategy based on cyclic thioacetals. 2-Phenyl-1,3-dithiepin could be polymerized and subsequently cleaved by hydrogenation with Raney-Nickel. The presence of thiol groups on the chain end has been proven by chemical means (derivatization) and by coating gold-nanoparticles. The second strategy, vinyl lactone quenchingv is a termination reaction based on vinyl esters. After a metathesis step, an inactive Fischer-type carbene is formed. Such acyl carbenes are unstable and self-decompose to set an inactive ruthenium complex and the functional group free without changing the reaction conditions. The two compounds vinylene carbonate and 3H-furanone gave rise to the placement of aldehydes and carboxylic acids at the polymer chain ends without the necessity to perform any deprotection steps after the functionalization. The development of those two functionalization methods led to several applications. By reacting hydroxyl-functionalized ROMP-polymers with norbornene acid, macromonomers were formed which were subsequently polymerized to the respective graft-copolymers. Also, the derivatization of the same functionalized polymers with propargylic acid gave rise to alkyne-functionalized polymers which were conjugated with azides. Furthermore, “ugly stars”, i.e. long-chain branched structures were synthesized by polycondensation of ABn-type macromonomers and telechelic polymers were accessed combining the described functionalization techniques.

New catalytic processes for the upgrading of furfural and 5-hydroxymethylfurfural to chemicals and fuels

The demand of energy, fuels and chemicals is increasing due to the strong growth of some countries in the developing world and the development of the world economy. Unfortunately, the general picture derived sparked an exponential increase in crude oil prices with a consequent increase of the chemical, by-products and energy, depleting the global market. Nowadays biomass are the most promising alternative to fossil fuels for the production of chemicals and fuels. In this work, the development of three different catalytic processes for the valorization of biomass-derived has been investigated. 5-hydroxymethylfurfural oxidation was studied under mild reaction condition using gold and gold/copper based catalysts synthetized from pre-formed nanoparticles and supported onto TiO2 and CeO2. The analysis conducted on catalysts showed the formation of alloys gold/copper and a strong synergistic effect between the two metals. For this reason the bimetallic catalysts supported on titania showed a higher catalytic activity respect to the monometallic catalysts. The process for the production of 2,5-bishydroxymethyl furan (BHMF) was also optimized by means the 5-hydroxymethylfurfural hydrogenation using the Shvo complex. Complete conversion of HMF was achieved working at 90 °C and 10 bar of hydrogen. The complex was found to be re-usable for at least three catalytic cycles without suffering any type of deactivation. Finally, the hydrogenation of furfural and HMF was carried out, developing the process of hydrogen transfer by using MgO as a catalyst and methanol as a hydrogen donor. Quantitative yields to alcohols have been achieved in a few hours working in mild condition: 160 °C and at autogenous pressure. The only by-products formed were light products such as CO, CO2 and CH4 (products derived from methanol transformation), easily separable from the reaction solution depressurizing the reactor.

Enantioselektive Synthese von Tetrahydroprotoberberinen und anderen Benzylisochinolinalkaloiden aus alpha-Aminonitrilen

Ziel dieser Arbeit war es, ausgehend von alpha-Aminonitrilen verschiedene Tetrahydroisochinolin-Alkaloide darzustellen. Es wurde gezeigt, dass sich das alpha-Aminonitril unter kontrollierten Bedingungen quantitativ in alpha-Position deprotonieren lässt und durch anschließende C-1-Alkylierung mit substituierten Benzylbromiden zu 1 Benzyl-3,4-dihydroisochinolinen umsetzen lässt. Diese konnten im nächsten Schritt mittels asymmetrischer Transferhydrierung nach Noyori in Alkaloid-Vorläufer mit hoher optischer Reinheit umgewandelt werden. Zur Überführung der (S)-1-Benzylisochinoline in die natürlich vorkommenden Alkaloide wurden diese N-methyliert und entschützt. Auf diese Weise konnten (+)-Laudanosin, (+)-Laudanidin und (+)-Armepavin dargestellt werden. Pictet-Spengler-Cyclisierung der Benzylisochinoline erzeugte Alkaloide vom Protoberberin-Typ. Die Ullmann-Kupplung zum Aufbau der Diaryletherbrücke bildete den Schlüsselschritt bei der Darstellung von Bisbenzylisochinolinalkaloiden. Unter Verwendung von N,N-Dimethylglycin, CuI und dem Einsatz von Mikrowellen-Strahlen wurden im folgenden Schritt (+)-O-Methylthalibrin und (+)-O-Tetramethylmagnolamin in enantiomerenreiner Form und mit guten Ausbeuten dargestellt. Die Synthese von (−)-Tetrahydropalmatin unter Reaktionsbedingungen nach Pictet und Spengler über ein in C-2’ blockiertes (S)-1-Benzylisochinolin gelang nicht. Stattdessen erfolgte eine exocyclische [1,3]-Umlagerung der Benzyl-Gruppe des Iminium-Ions. Diese Umlagerung ist mit der von Knabe gefundenen endocyclischen Umlagerung von 1,2-disubstituierten 1,2-Dihydroisochinolinen verwandt. Der Nachweis über das Auftreten freier Radikale während der hier gefundenen [1,3]-Benzyl-Umlagerung erfolgte über ein Crossover-Experiment, Isotopen-Markierung sowie Studien zur Inhibierung bzw. Initiierung freier Radikale. Die experimentellen Befunde und DFT Berechnungen von Straub unterstützen die Theorie zum Verlauf über eine diffusionskontrollierte Radikal-Ketten-Reaktion.

Functionalization of hyperbranched polycarbosilanes - block copolymers and electrochemistry

Polycarbosilanes are a class of polymers at the interface between organic and inorganic chemistry. They are characterized by a high thermal and chemical inertness and high flexibility, especially pronounced for branched structures. Linear polycarbosilanes are well known as precursors for the preparation of SiCx ceramics. Additionally, more sophisticated architectures like dendrimers, hyperbranched polymers or block copolymers have been the subject of research for more than a decade. The scope of this work was to expand the properties and fields of application for polycarbosilane-containing structures. Thus, the work is divided in two major parts. The first part covers the synthesis and characterization of hyperbranched polycarbosilanes containing organometallic moieties. Hyperbranched poly-carbosilanes were synthesized using hydrosilylation of diallylmethylsilane and methyldiundecenylsilane. The degree of branching for polydiallymethylsilane was determined using standard 1H-NMR spectroscopy. The functional building blocks ferrocenyldimethylsilane and diferrocenylmethylsilane were synthesized which contain an isolated ferrocene unit or two ferrocenes bridged by silicon, respectively. Hyperbranched polycarbosilanes functionalized with ferrocenyl moieties were synthesized by modification of preformed polymers or by copolymerization of AB2 carbosilane monomers with AX-type ferrocenylsilanes. Polymers with Mn = 2500-9000g/mol and ferrocene contents of up to 67wt% were obtained. Electrochemical characterization by cyclic voltammetry revealed that polymers functionalized with isolated ferrocene units showed a single reversible oxidation wave, while voltammograms for polymers functionalized with diferrocenyl silane exhibited two well-separated reversible oxidation-reduction waves. This shows that the polymer bound ferrocenes bridged by silicon are electronically communicating and thus oxidation of the first ferrocene shifts the oxidation potential for the adjacent one. The polymers were utilized successfully for the preparation of modified electrodes with persistent and reproducible electrochemical response in organic solvents as well as in aqueous solution. The presented work has proven that ferrocenyl-functionalized hyperbranched polymers exhibit similar electrochemical properties as the analogous dendrimers. In a further approach it was shown that hyperbranched polymers containing organometallic moieties can be synthesized by polymerization of a new ferrocene-containing AB2 monomer - diallylferrocenylsilane. The second part of this work is dedicated to the preparation of core-functional hyperbranched polycarbosilanes. Low molecular weight ambifunctional molecules were synthesized that contain double bonds for the attachment of a polycarbosilane polymer as well as a second functionality available for further reaction and modification. Reactive vinyl groups in the core molecule allow an efficient attachment of hyperbranched polycarbosilane which was proven by MALDI-ToF and GPC. In combination with slow monomer addition techniques molecular weight and polydispersity of the polymers were controlled successfully. Core-functional polymers were characterized by NMR-spectroscopy, MALDI-ToF and GPC. Polymers with polydispersities <2 and molecular weights up to 5300g/mol were obtained. Transformation of the double bonds of the carbosilane was demonstrated with various silanes using hydrosilylation reaction or hydrogenation. Additionally, the core-functionality was varied resulting in polymers with bromo-, phthalimide-, amine- or azide moieties. Thus, a versatile synthetic strategy was developed that allows the synthesis of tailor-made polymers.A promising approach is the application of the polymer building blocks in copolymer synthesis. Bisglycidolization of amine-functional polycarbosilanes produces macro-initiators that are suitable for the multibranching-ring opening polymerization of glycidol. This experiments lead to the first example of hyperbranched-hyperbranched amphiphilic block copolymers, hb-PG-b-hb-PCS. Furthermore, the implementation of copper-catalyzed cycloaddition between azide-functional polycarbosilane and alkyne-functional poly(ethoxyethyl glycidylether) resulted in linear-hyperbranched block copolymers. The facile removal of acetal protecting groups provided convenient access to lin-PG-b-hb-PCS.