Hihnakuljetinjärjestelmien modulointi

Tämä diplomityö tutkii moduloinnilla saavutettavaa hyötyä kuljetinliiketoiminnassa. Johdanto-osassa kerrotaan yrityksen taustasta ja projektiliiketoiminnan kehitysnäkymistä, hihnakuljetinjärjestelmien historiasta ja nykyisestä kilpailutilanteesta. Lisäksi siinä on mainittu työn tavoitteet, sekä tutkimuksen rajaus. Hihnakuljetinjärjestelmien modulointia käsittelevässä osassa selvitetään moduloinnin historiaa ja on kerrottu siihen liittyviä käsitteitä ja menettelytapoja. Tutkimusosan alussa on esitetty tutkimuskysymykset. Tutkimusmenetelmänä on tapaustutkimus ja siinä on verrattu kahta CASE- tapausta keskenään haastattelujen avulla, sekä pyydetty osallistuneilta jatkotoimenpide-ehdotuksia, koskien modulointia. Toiminnallisen viitekehyksen osassa kuvataan ne tavat, joilla modulointi yrityksessä toteutetaan asiakasvaatimukset ja palveluhallinta huomioiden. Lisäksi siinä kuvataan osaamisen kehittämisen menettely. Tutkimustuloksien tarkastelun yhteydessä on kerrottu CASE- tapauksien perustiedot ja tiedon keräämisen tapa. Tutkimustuloksien analysointi on suoritettu siten, että tuloksista on nostettu esille moduloinnin kannalta oleelliset vastaukset ja ne on analysoitu. Tämän jälkeen suoritettiin pohdinta ja johtopäätökset niistä analysoiduista vastauksista, jotka ovat tärkeitä moduloinnin ja yrityksen kehityksen kannalta. Jatkotoimenpiteet on jaettu kolmeen pääryhmään, joista ensimmäisenä on toiminnan kehittäminen moduloimalla. Toisessa on tarkasteltu sisäisen toiminnan kannalta tärkeitä kohteita ja ehdotettu toimenpiteitä toiminnan tehostamiseksi. Kolmantena ryhmänä ovat tutkimusaiheet, joiden avulla pyritään selvittämään puutteet tai epäkohdat nykyisessä toiminnassa. Yhteenvedossa on tarkasteltu yrityksen strategisten tavoitteiden toteutumista suhteessa hypoteesiin. Siinä on myös esitetty tulevaisuuden haasteita ympäristönsuojelun asettamat vaatimukset huomioiden.

Competence in intensive and critical care nursing - development of a basic assessment scale for graduating nursing students

Intensive and critical care nursing is a speciality in its own right and with its own nature within the nursing profession. This speciality poses its own demands for nursing competencies. Intensive and critical care nursing is focused on severely ill patients and their significant others. The patients are comprehensively cared for, constantly monitored and their vital functions are sustained artificially. The main goal is to win time to cure the cause of the patient’s situation or illness. The purpose of this empirical study was i) to describe and define competence and competence requirements in intensive and critical care nursing, ii) to develop a basic measurement scale for competence assessment in intensive and critical care nursing for graduating nursing students, and iii) to describe and evaluate graduating nursing students’ basic competence in intensive and critical care nursing by seeking the reference basis of self-evaluated basic competence in intensive and critical care nursing from ICU nurses. However, the main focus of this study was on the outcomes of nursing education in this nursing speciality. The study was carried out in different phases: basic exploration of competence (phase 1 and 2), instrumentation of competence (phase 3) and evaluation of competence (phase 4). Phase 1 (n=130) evaluated graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care with Basic Knowledge Assessment Tool version 5 (BKAT-5, Toth 2012). Phase 2 focused on defining competence in intensive and critical care nursing with the help of literature review (n=45 empirical studies) as well as competence requirements in intensive and critical care nursing with the help of experts (n=45 experts) in a Delphi study. In phase 3 the scale Intensive and Critical Care Nursing Competence Scale (ICCN-CS) was developed and tested twice (pilot test 1: n=18 students and n=12 nurses; pilot test 2: n=56 students and n=54 nurses). Finally, in phase 4, graduating nursing students’ competence was evaluated with ICCN-CS and BKAT version 7 (Toth 2012). In order to develop a valid assessment scale of competence for graduating nursing students and to evaluate and establish the competence of graduating nursing students, empirical data were retrieved at the same time from both graduating nursing students (n=139) and ICU nurses (n=431). Competence can be divided into clinical and general professional competence. It can be defined as a specific knowledge base, skill base, attitude and value base and experience base of nursing and the personal base of an intensive and critical care nurse. Personal base was excluded in this self-evaluation based scale. The ICCN-CS-1 consists of 144 items (6 sum variables). Finally, it became evident that the experience base of competence is not a suitable sum variable in holistic intensive and critical care competence scale for graduating nursing students because of their minor experience in this special nursing area. ICCN-CS-1 is a reliable and tolerably valid scale for use among graduating nursing students and ICU nurses Among students, basic competence of intensive and critical care nursing was self-rated as good by 69%, as excellent by 25% and as moderate by 6%. However, graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care were poor. The students rated their clinical and professional competence as good, and their knowledge base and skill base as moderate. They gave slightly higher ratings for their knowledge base than skill base. Differences in basic competence emerged between graduating nursing students and ICU nurses. The students’ self-ratings of both their basic competence and clinical and professional competence were significantly lower than the nurses’ ratings. The students’ self-ratings of their knowledge and skill base were also statistically significantly lower than nurses’ ratings. However, both groups reported the same attitude and value base, which was excellent. The strongest factor explaining students’ conception of their competence was their experience of autonomy in nursing. Conclusions: Competence in intensive and critical care nursing is a multidimensional concept. Basic competence in intensive and critical care nursing can be measured with self-evaluation based scale but alongside should be used an objective evaluation method. Graduating nursing students’ basic competence in intensive and critical care nursing is good but their knowledge and skill base are moderate. Especially the biological and physiological knowledge base is poor. Therefore in future in intensive and critical care nursing education should be focused on both strengthening students’ biological and physiological knowledge base and on strengthening their overall skill base. Practical implications are presented for nursing education, practice and administration. In future, research should focus on education methods and contents, mentoring of clinical practice and orientation programmes as well as further development of the scale.

Streamlining Launch Support Operations in a Product Platform

The new product development process is a massive investment to a company that aims to reduce their products’ time-to-market. Capability to shorter time-to market allows longer life-cycle to products which are introduced to market earlier but also give advantage to start product launch later while simultaneously learning from customer behavior and competitors. The product launch support operations are the last ramp-up activities before the product launching. This study defines what these operations mean in a product platform and how they can be streamlined to be more efficient. The methodology includes interviews, innovative group brainstorming and regular working group meetings. The challenges concerning the current situation of product launch support operations are allocated into four categories: General, Process, Project Resources and Project Management including altogether ten sub challenges. The challenges include issues related to technology and marketing management, branding strategy, organizing the global platform structure, harmonizing processes and clarifying handovers between shareholders in the process. The study makes a suggestion of a new Product Launch Support organization and clarification of its roles, responsibilities and tasks. In addition a new project management tool and Lessons Learned are suggested to improve the project management. The study can be seen as a pre-study when having an aim at combining technological and marketing know-how in the product ramp-up process before actual production. The future proceedings are suggested to include more detailed specifications and implementation in order to reach the long range target, reduced the time-to-market.

Kahden merkkijonon pisimmän yhteisen alijonon ongelma ja sen ratkaiseminen

Tämä tutkielma kuuluu merkkijonoalgoritmiikan piiriin. Merkkijono S on merkkijonojen X[1..m] ja Y[1..n] yhteinen alijono, mikäli se voidaan muodostaa poistamalla X:stä 0..m ja Y:stä 0..n kappaletta merkkejä mielivaltaisista paikoista. Jos yksikään X:n ja Y:n yhteinen alijono ei ole S:ää pidempi, sanotaan, että S on X:n ja Y:n pisin yhteinen alijono (lyh. PYA). Tässä työssä keskitytään kahden merkkijonon PYAn ratkaisemiseen, mutta ongelma on yleistettävissä myös useammalle jonolle. PYA-ongelmalle on sovelluskohteita – paitsi tietojenkäsittelytieteen niin myös bioinformatiikan osa-alueilla. Tunnetuimpia niistä ovat tekstin ja kuvien tiivistäminen, tiedostojen versionhallinta, hahmontunnistus sekä DNA- ja proteiiniketjujen rakennetta vertaileva tutkimus. Ongelman ratkaisemisen tekee hankalaksi ratkaisualgoritmien riippuvuus syötejonojen useista eri parametreista. Näitä ovat syötejonojen pituuden lisäksi mm. syöttöaakkoston koko, syötteiden merkkijakauma, PYAn suhteellinen osuus lyhyemmän syötejonon pituudesta ja täsmäävien merkkiparien lukumäärä. Täten on vaikeaa kehittää algoritmia, joka toimisi tehokkaasti kaikille ongelman esiintymille. Tutkielman on määrä toimia yhtäältä käsikirjana, jossa esitellään ongelman peruskäsitteiden kuvauksen jälkeen jo aikaisemmin kehitettyjä tarkkoja PYAalgoritmeja. Niiden tarkastelu on ryhmitelty algoritmin toimintamallin mukaan joko rivi, korkeuskäyrä tai diagonaali kerrallaan sekä monisuuntaisesti prosessoiviin. Tarkkojen menetelmien lisäksi esitellään PYAn pituuden ylä- tai alarajan laskevia heuristisia menetelmiä, joiden laskemia tuloksia voidaan hyödyntää joko sellaisinaan tai ohjaamaan tarkan algoritmin suoritusta. Tämä osuus perustuu tutkimusryhmämme julkaisemiin artikkeleihin. Niissä käsitellään ensimmäistä kertaa heuristiikoilla tehostettuja tarkkoja menetelmiä. Toisaalta työ sisältää laajahkon empiirisen tutkimusosuuden, jonka tavoitteena on ollut tehostaa olemassa olevien tarkkojen algoritmien ajoaikaa ja muistinkäyttöä. Kyseiseen tavoitteeseen on pyritty ohjelmointiteknisesti esittelemällä algoritmien toimintamallia hyvin tukevia tietorakenteita ja rajoittamalla algoritmien suorittamaa tuloksetonta laskentaa parantamalla niiden kykyä havainnoida suorituksen aikana saavutettuja välituloksia ja hyödyntää niitä. Tutkielman johtopäätöksinä voidaan yleisesti todeta tarkkojen PYA-algoritmien heuristisen esiprosessoinnin lähes systemaattisesti pienentävän niiden suoritusaikaa ja erityisesti muistintarvetta. Lisäksi algoritmin käyttämällä tietorakenteella on ratkaiseva vaikutus laskennan tehokkuuteen: mitä paikallisempia haku- ja päivitysoperaatiot ovat, sitä tehokkaampaa algoritmin suorittama laskenta on.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

E-PORT. Improving efficiency of Finnish port community by intelligent systems Final report of the Mobile Port project

The management of port-related supply chains is challenging due to the complex and heterogeneous operations of the ports with several actors and processes. That is why the importance of information sharing is emphasised in the ports. However, the information exchange between different port-related actors is often cumbersome and it still involves a lot of manual work and paper. Major ports and port-related actors usually have advanced information systems in daily use but these systems are seldom interoperable with each other, which prevents economies of scale to be reached. Smaller ports and companies might not be equipped with electronic data transmission at all. This is the final report of the Mobile port (MOPO) project, which has sought ways to improve the management and control of port-related sea and inland traffic with the aid of ICT technologies. The project has studied port community systems (PCS) used worldwide, evaluated the suitability of a PCS for the Finnish port operating environment and created a pilot solution of a Finnish PCS in the port of HaminaKotka. Further, the dry port concept and its influences on the transportation system have been explored. The Mobile Port project comprised of several literature reviews, interviews of over 50 port-related logistics and/or ICT professionals, two different kinds of simulation models as well as designing and implementing of the pilot solution of the Finnish PCS. The results of these multiple studies are summarised in this report. Furthermore, recommendations for future actions and the topics for further studies are addressed in the report. The study revealed that the information sharing in a typical Finnish port-related supply chain contains several bottlenecks that cause delays in shipments and waste resources. The study showed that many of these bottlenecks could be solved by building a port community system for the Finnish port community. Almost 30 different kinds of potential services or service entities of a Finnish PCS were found out during the study. The basic requirements, structure, interfaces and operation model of the Finnish PCS were also defined in the study. On the basis of the results of the study, a pilot solution of the Finnish PCS was implemented in the port of HaminaKotka. The pilot solution includes a Portconnect portal for the Finnish port community system (available at https://www.portconnect.fi) and two pilot applications, which are a service for handling the information flows concerning the movements of railway wagons and a service for handling the information flows between Finnish ports and Finland-Russian border. The study also showed that port community systems can be used to improve the environmental aspects of logistics in two different ways: 1) PCSs can bring direct environmental benefits and 2) PCSs can be used as an environmental tool in a port community. On the basis of the study, the development of the Finnish port community system should be continued by surveying other potential applications for the Finnish PCS. It is also important to study if there is need and resources to extend the Finnish PCS to operate in several ports or even on a national level. In the long run, it could be reasonable to clarify whether there would be possibilities to connect the Finnish PCS as a part of Baltic Sea wide, European-wide or even worldwide maritime and port-related network in order to get the best benefit from the system

Low-fidelity bench models for basic surgical skills training during undergraduate medical education

It is remarkable the reduction in the number of medical students choosing general surgery as a career. In this context, new possibilities in the field of surgical education should be developed to combat this lack of interest. In this study, a program of surgical training based on learning with models of low-fidelity bench is designed as a complementary alternative to the various methodologies in the teaching of basic surgical skills during medical education, and to develop personal interests in career choice.

Basic skills for outpatient surgery in medical graduation

Medical students must have domain of basic surgery skills before starting more advanced stages of surgical learning. The authors present a practical and reproducible system of operative techniques circuit, idealized and often applied to the fourth year medical students of a private educational institution. This method has enabled accurate assessment of students' skills, improving their performance and preparing them for more advanced stages of the surgical learning.

Epidemiological profile and postoperative complications of women undergoing gynecological surgery in a reference center in the northern brazilian legal amazon

Objective: To evaluate the epidemiological profile and the operative complications of patients undergoing gynecological operations for benign diseases in a tertiary public hospital in the state of Roraima, Brazil. Methods: We conducted a retrospective survey through the analysis of 518 records of patients submitted to gynecological operations between January and June 2012. We included the three major operations during this period (n = 175): hysterectomy, colpoperineoplasty and suburethral sling placement. We excluded 236 cases of tubal ligation and 25 cases where it was not possible to access to medical records. Results: The mean age was 47.6 years; the education level of most patients was completed junior high (36.6%); 77% were from the State capital, 47.4% were in stable relationships and 26.3% were housewives. The majority of patients had given birth three or more times (86.6%), with previous vaginal delivery in 50.2%, and cesarean delivery, 21%. The main diagnostic indications for surgical treatment were uterine myoma (46.3%), urinary incontinence (27.4%) and genital dystopias (17.7%). We found three cases (1.7%) of high-grade intraepithelial lesions on Pap smear. The most common procedure was total hysterectomy (19.8%), 15.5% vaginally. The most common complication was wound infection (2.2%). Conclusion: Women undergoing gynecological operations due to benign disease had a mean age of 47 years, most had levels of basic education, came from the capital, were in stable relationships, predominantly housewives, multiparous and showed low operative complication rates.

Suomalaisen rakennusyrityksen projektihallinnan apuvälineistön implementointi Venäjälle

Työn tavoitteena on selvittää, miten suomalainen rakennusyritys saa implementoitua projektihallinnan apuvälineistönsä Venäjälle. Lisäksi työn aikana laaditaan perusrakenne apuvälineistölle. Apuvälineistön avulla varmistetaan yhdenmukainen toiminta yrityksen projekteissa Venäjällä, sekä hallitaan näihin kohdistuvia riskejä. Työn toteutusmenetelmänä on konstruktiivinen tutkimusote, jossa lopputulos pohjautuu aikaisempaan teoriaan ja empiirisiin löydöksiin. Haastattelujen avulla rakennetaan näkemys apuvälineistölle ja apuvälineiden sisällölle asetettavista vaateista. Työssä esitetyt ratkaisut pohjautuvat teoriaan, haastatteluihin ja yrityksen sisäiseen materiaaliin. Rakennusprojektit ovat toteutustavaltaan yhtäläisiä maasta riippumatta, jonka vuoksi Suomessa käytössä oleva apuvälineistön rakenne toimii myös Venäjällä. Yksittäisten apuvälineiden eroavuudet johtuvat pääasiassa lainsäädännön sekä toimintatapojen eroavuudesta. Työn pohjalta havaittiin implementoinnin onnistumisen vaativan kolmen elementin toteutumisen. Nämä ovat toimivat apuvälineet, laadukas johtaminen sekä apuvälineistön käyttöönottosuunnitelman mukainen toiminta. Työn konstruktio kulminoituu käyttöönottosuunnitelmaan, mikä koostuu kolmesta mekanismista. Mekanismeilla huomioidaan apuvälineiden sovittamisen, apuvälineistön käyttöönoton sekä muutosjohtamisen vaateet.

Local Embeddedness and Knowledge Acquisition and How They Affect Finnish Business Operations in Russia

This pilot project aims examine the factors of the Finnish subsidiaries local embeddedness, their knowledge creation capabilities and the transfer mechanisms of new practices in the context of the Russian market. The research is designed as a multiple case study conducted with a qualitative approach. The empirical data consists of the interviews of the four Finnish case companies operating in the Kaluga region and three local partner companies. The deductive and inductive approaches were employed to conduct the analysis of the data. The propositions for the future study were developed in the conclusive chapters of the research, where we propose that the factor of the economy growth and industrialization matters in terms of subsidiaries’ role dedication, their knowledge creation capabilities, and direction of the knowledge flow within the local environment.

The Finnish Electronic Library - Basic Research Infrastructure

Kristiina Hormia-Poutasen esitys KRE-konferenssissa 2013.

Kone- ja laitesuunnittelupalvelun nykytilanteen kartoitus ja kehittämisen lähtökohdat muuttuvassa asiakasympäristössä

Haastattelututkimus on menetelmä, jolla voidaan kerätä yrityksen asiakaskunnalta asiakas-palaute ja tulokseksi saadaan yrityksen laatujohtamiseen kuuluva tieto asiakastyytyväisyy-destä. Asiakastyytyväisyystutkimus on yrityksen päätöksentekoa tukeva työkalu. Rejlers Oy:n tavoitteena oli selvittää mahdollisuus yritystoiminnan tehostamiseen yrityksen Itä-Suomen kone- ja laitesuunnittelun osastolla. Työssä tavoite pyrittiin saavuttamaan haastattelun kysymyksenasettelujen kohdistuessa niin yrityksen nykyiseen toimintaan kuin asiakaskunnassa mahdollisesti tapahtuviin muutoksiin. Kirjallisuuden perusteella selvitettiin asiakastyytyväisyystutkimuksen peruskäsitteitä, joita käytettiin työn suorittamisessa. Työn haastattelut suoritettiin Rejlers Oy:n asiakaskunnasta suunnittelupalvelujen volyymiin perustuen valittujen asiakkaiden luona. Haastatteluvastausten tietokoneavusteisesta analyysistä muodostettiin työssä tutkimuksen tulos. Tutkimustuloksesta todetaan, että Rejlers Oy:n nykyiseen toimintaan ei asiakaskunnassa nähdä tarvetta muutoksiin. Palvelutarpeiden mahdollisesti muuttuessa, nousi tutkimustu-loksessa merkittävimmäksi asiakaskuntaa kiinnostavaksi kehitettäväksi palveluksi cleantech-teknologian laaja-alainen osaaminen. Työssä on luotu lähtökohta Rejlers Oy:n käyttöön soveltuvalle asiakastyytyväisyystutki-mukselle. Haastattelututkimuksena suoritettavan asiakastyytyväisyystutkimuksen kehittä-misellä pyritään tehostamaan Rejlers Oy:n yritystoimintaa.

Reframing the relationship between service design and operations: a service engineering approach

The significance of services as business and human activities has increased dramatically throughout the world in the last three decades. Becoming a more and more competitive and efficient service provider while still being able to provide unique value opportunities for customers requires new knowledge and ideas. Part of this knowledge is created and utilized in daily activities in every service organization, but not all of it, and therefore an emerging phenomenon in the service context is information awareness. Terms like big data and Internet of things are not only modern buzz-words but they are also describing urgent requirements for a new type of competences and solutions. When the amount of information increases and the systems processing information become more efficient and intelligent, it is the human understanding and objectives that may get separated from the automated processes and technological innovations. This is an important challenge and the core driver for this dissertation: What kind of information is created, possessed and utilized in the service context, and even more importantly, what information exists but is not acknowledged or used? In this dissertation the focus is on the relationship between service design and service operations. Reframing this relationship refers to viewing the service system from the architectural perspective. The selected perspective allows analysing the relationship between design activities and operational activities as an information system while maintaining the tight connection to existing service research contributions and approaches. This type of an innovative approach is supported by research methodology that relies on design science theory. The methodological process supports the construction of a new design artifact based on existing theoretical knowledge, creation of new innovations and testing the design artifact components in real service contexts. The relationship between design and operations is analysed in the health care and social care service systems. The existing contributions in service research tend to abstract services and service systems as value creation, working or interactive systems. This dissertation adds an important information processing system perspective to the research. The main contribution focuses on the following argument: Only part of the service information system is automated and computerized, whereas a significant part of information processing is embedded in human activities, communication and ad-hoc reactions. The results indicate that the relationship between service design and service operations is more complex and dynamic than the existing scientific and managerial models tend to view it. Both activities create, utilize, mix and share information, making service information management a necessary but relatively unknown managerial task. On the architectural level, service system -specific elements seem to disappear, but access to more general information elements and processes can be found. While this dissertation focuses on conceptual-level design artifact construction, the results provide also very practical implications for service providers. Personal, visual and hidden activities of service, and more importantly all changes that take place in any service system have also an information dimension. Making this information dimension visual and prioritizing the processed information based on service dimensions is likely to provide new opportunities to increase activities and provide a new type of service potential for customers.

Hitsattavan konstruktion laadun ja rakenteen kehittäminen lyöntipaalutuskoneessa

Työn tavoitteena oli Junttan Oy:n valmistaman lyöntipaalutuskoneeseen kuuluvan tärkeän konstruktion, peruskeilin, laadun ja rakenteen kehittäminen. Työ tehtiin osana Tekesin ja usean yrityksen rahoittamaa HitNet-projektia (Hitsaavan teollisuuden hankintatoimen ja toimitusketjun tehostaminen). Peruskeiliä tutkittiin seuraamalla sen valmistusta Junttan Oy:n omassa tuotannossa sekä alihankintayrityksissä. Ongelmana peruskeilin suunnittelussa ja valmistuksessa olivat hyvin tarkat toleranssirajat sen liukupinnoille. Suurimmat ongelmat syntyivät hitsaamisen tuoman suuren lämmöntuonnin aiheuttamien muodonmuutosten ja särmäyksestä johtuvan takaisinjouston yhteydessä. Näihin ongelmiin pyrittiin kehittämään ratkaisuja peruskeilin rakennetta muuttamalla, Total Welding Management -laatutyökalua hyödyntämällä sekä hitsaustoimintaa ja särmäystä kehittämällä. Peruskeilin suunnittelussa ja valmistuksessa havaittujen ongelmien perusteella kehitettiin useita ratkaisuja, joista yksi otettiin käyttöön ja siitä valmistetaan prototyyppi Junttan Oy:n omassa tuotannossa. Uuden mallin valmistuessa päätetään tuleeko siitä korvaaja edeltäjälleen vai testataanko vielä muita kehitysideoita.