Bioremediation and CO2 scavenging using molybdenum-containing enzymes

Carbon dioxide valorization, will not only help to relieve the greenhouse effect but might also allow us to transform it in value-added chemicals that will help overcoming the energy crisis. To accomplish this goal, more research that focus on sequestering CO2 and endeavors through a carbon-neutral or carbon-negative strategy is needed in order to handle with the dwindling fossil fuel supplies and their environmental impact. Formate dehydrogenases are a promising means of turning CO2 into a biofuel that will allow for a reduction of greenhouse gas emissions and for a significant change to the economic paramount. The main objective of this work was to assess whether a NAD+-independent molybdenum-containing formate dehydrogenase is able to catalyze the reduction of CO2 to formate. To achieve this, a molybdenum-containing formate dehydrogenase was isolated from the sulfate reducing bacteria Desulfovibrio desulfuricans ATCC 27774. Growth conditions were found that allowed for a greater cellular mass recovery and formate dehydrogenase expression. After growth trials, kinetic assays for formate oxidation and CO2 reduction were performed and kinetic parameters determined. For the formate oxidation reaction, a KM of 49 μM and a turnover constant of 146 s-1 were determined. These kinetic parameters are in agreement with those determined by Mota, et al. (2011). Finally, we found that this molybdenum-containing enzyme was able to catalyze the reduction of CO2 to formate with a turnover constant of 4.6 s-1 and a KM of 13 μM. For the first time a NAD+-independent molybdenum-containing formate dehydrogenase was found to catalyze CO2 reduction, allowing its use as a biocatalyst in energetically efficient CO2 fixation processes that can be directed towards bioremediation or as an alternative and renewable energy source. Characterizing these enzymes may lead to the development of more efficient synthetic catalysts, make them readily available and more suited for practical applications.

Fungal communities in archives: assessment strategies and impact on paper conservation and human health

The main results presented in this PhD Dissertation have been published in interna-tional journals included in the Science Citation Index (SCI)

The establishment mode choice of German multinational enterprises in Brazil: A comparative approach

We examine the drivers behind the establishment mode choice of German multinational enterprises (MNEs) in the sectors of Automotive, Chemicals and Mechanical Engineering in Brazil for the years 1993-2013 using a novel sample of primary data obtained directly from German MNEs. Based on prevalent theories found in the literature, we test the most common hypotheses on our sample. Firms with high R&D activities and firms with prior market knowledge in Brazil in from of previous sales offices are more likely to enter Brazil by a Greenfield investment. We also show that it is the specific private ownership of the German so-called hidden champions that drive those specific SMEs to enter Brazil by Greenfield, a sneaking suspicion that has been made before. Finally, we show that the establishment mode choice between Brazil and the USA only deviates to a low extent, with German MNEs preferring to enter Brazil by Greenfield and the USA by M&A. Thereby, we provide valuable insights for future research in this field.

Observation of initial clinical manifestations and repercussions from the treatment of 314 human injuries caused by black sea urchins (Echinometra lucunter) on the southeastern Brazilian coast

INTRODUCTION: Injuries caused by sea urchins are the most common caused by marine animals in humans in Brazil, with the black sea urchin (Echinometra lucunter) causing the most injuries to bathers. METHODS: This study observed 314 human wounds with emphasis on the early observation of clinical signs and symptoms and their implications on the recommended treatment. RESULTS: All the injuries were caused by black sea urchins and were observed in bathers. The lesions and the pain were associated with penetration of the spines; there was no early inflammation or pain without pressure on the wounded places. Complications arising from this kind on injury, including infections and foreign body granulomas, are associated with the permanence of the spines in the wounds. CONCLUSIONS: The study confirmed that this kind of injury is the most common accident caused by aquatic animals in Brazil. The main therapeutical recommendation is early removal of the spines to prevent late complications, such as infections and the formation of foreign body granulomas.

Estigma e percepções dos médicos de Clínica Geral sobre a doença mental e o suicídio

RESUMO: INTRODUÇÃO: A OMS (2001) revela que cerca de 450 milhões de pessoas sofrem de perturbações mentais ou comportamentais em todo o mundo, mas apenas uma pequena minoria tem tratamento, ainda que elementar. Transformam-se em vítimas por causa da sua doença e convertem-se em alvos de estigma e discriminação. O suicídio é considerado como um grande problema de saúde pública em todo o mundo, é uma das principais causas de morte de jovens adultos e situa-se entre as três maiores causas de morte na população entre 15-34 anos (OMS, 2001). As perturbações mentais aumentam o risco de suicídio. A depressão, esquizofrenia, e a utilização de substâncias incrementam o risco de suicídio. Estudos (Sartorius, 2002; Magliano et al., 2012) mostram que os profissionais de saúde, tal como o público em geral, podem ter atitudes negativas e estigma em relação às pessoas com perturbações mentais, podendo agir em conformidade, uma vez feito e conhecido o diagnóstico psiquiátrico. Os clínicos gerais são os receptores das perturbações mentais e tentativas de suicídio nas principais portas de entrada no acesso a cuidados de saúde. As crenças, conhecimentos e contacto com a doença mental e o suicídio, podem influenciar a atenção clínica. OBJECTIVOS: Avaliar o estigma e as percepções dos médicos de clínica geral em relação às tentativas de suicídio, o suicídio e perturbações mentais bem como os possíveis factores associados a estes fenómenos. MATERIAIS E MÉTODOS: Estudo do tipo transversal, combinando métodos quantitativos e qualitativos. A amostra é constituída por 125 sujeitos, médicos de clínica geral. Utilizaram-se as versões adaptadas dos seguintes instrumentos: Questionário sobre Percepções e Estigma em Relação à Saúde Mental e ao Suicídio (Liz Macmin e SOQ, Domino, 2005) e a Escala de Atitudes sobre a Doença Mental (Amanha Hahn, 2002). Para o tratamento estatístico dos dados usou-se a estatística 1) descritiva e 2) Análise estatística das hipóteses formuladas (Qui Quadrado - 2) a correlação entre variáveis (Spearman: ρ, rho). Os dados conectados foram limpos de inconsistências com base no pacote informático e estatístico SPSS versão 20. Para a aferição da consistência interna foi usado o teste de Alfa de Cronbach. RESULTADOS: Uma boa parte da amostra (46.4%) refere que não teve formação formal ou informal em saúde mental e (69.35%) rejeitam a ideia de que “grupos profissionais como médicos, dentistas e psicólogos são mais susceptíveis a cometer o suicídio”. Já (28.0%) têm uma perspectiva pessimista quanto a possibilidade de recuperação total dos sujeitos com perturbação mental. Sessenta e oito(54.4%) associa sujeitos com perturbação mental, a comportamentos estranhos e imprevisíveis, 115 (92.0%) a um baixo QI e 35 (26.7%) a poderem ser violentas e e perigosas. Os dados mostram uma associação estatisticamente significativa (p0.001) entre as variáveis: tempo de serviço no SNS, recear estar perto de sujeitos com doença mental e achar que os sujeitos com doença mental são mais perigosos que outros. Em termos estatísticos, existe uma associação estatitisticamente significativa entre as duas variáveis(X2=9,522; p0.05): percepção de que “é vergonhoso ter uma doença mental” e os conhecimentos em relação à doença mental. Existe uma correlação positiva, fraca e estatisticamente significativa entre os conhecimentos dos clínicos gerais(beneficiar-se de formação em saúde mental) e a percepção sobre os factores de risco (0,187; P0,039). DISCUSSÃO E CONCLUSÕES: A falta de conhecimento sobre as causas e factores de risco para os comportamentos suicidários, opções de intervenção e tratamento, particularmente no âmbito da doença mental, podem limitar a procura de ajuda individual ou dos próximos. Percepções negativas como o facto de não merecerem prioridade nos serviços, mitos (frágeis e cobarde, sempre impulsivo, chamadas de atenção, problemas espirituais) podem constituir-se como um indicador de que os clínicos gerais podem sofrer do mesmo sistema de estigma e crenças, de que sofre o público em geral, podendo agir em conformidade (atitudes de afastamento ereceio). As atitudes são influenciadas por factores como a formação, cultura e sistema de crenças. Sujeitos com boa formação na área da saúde mental têm uma percepção positiva e optimista sobre os factores de risco e uma atitude positiva em relação aos sujeitos com doença mental e comportamentos suicidários.-------------ABSTRACT: INTRODUCTION: The WHO (2001) reveals that about 450 million people suffer from mental or behavioral disorders worldwide, but only a small minority have access to treatment, though elementary. They become victims because of their disease and they become the targets of stigma and discrimination. Suicide is seen as a major public health problem worldwide, is a leading cause of death for young adults and is included among the three major causes of death in the population aged 15-34 years (WHO, 2001). Mental disorders increase the risk of suicide. Depression, schizophrenia, and the substances misuse increase the risk of suicide. Studies (Sartorius, 2002; Magliano et al, 2012) show that health professionals, such as the general public, may have negative attitudes and stigma towards people with mental disorders, and can act accordingly after psychiatric diagnosis is known. General practitioners are the main entry points of mental disorders and suicide attempts in the health sistem. Beliefs, knowledge and contact with mental illness and suicide, may influence clinical care. OBJECTIVES: To assess stigma and perceptions of general practitioners in relation to suicide attempts, suicide and mental disorders as well as possible factors associated with these phenomena. MATERIAL AND METHODS: This was a descriptive cross-sectional study, combining quantitative and qualitative methods. The sample consisted of 125 subjects, general practitioners. We used adapted versions of the following instruments: Questionnaire of Perceptions and Stigma in Relation to Mental Health and Suicide (Liz Macmin and SOQ, Domino, 2005) and the Scale of Attitudes on Mental Illness (Tomorrow Hahn, 2002). For the statistical treatment of the data we used: 1) descriptive (Data distribution by absolute and relative frequencies for each of the variables under study (including mean and standard deviation measures of central tendency and deviation), 2) statistical analysis of hypotheses using (Chi Square - 2, a hypothesis test that is intended to find a value of dispersion for two nominal variables, evaluating the association between qualitative variables) and the correlation between variables (Spearman ρ, rho), a measure of non-parametric correlation, which evaluates an arbitrary monotonic function can be the description of the relationship between two variables, without making any assumptions about the frequency distribution of the variables). For statistical analysis of the correlations were eliminated subjects who did not respond to questions. The collected data were cleaned for inconsistencies based on computer and statistical package SPSS version 20. To measure the internal consistency was used the Cronbach's alpha test. RESULTS: A significant part of the sample 64 (46.4%) reported no formal or informal training in mental health and 86 (69.35%) reject the idea that "professional groups such as doctors, dentists and psychologists are more likely to commit suicide." On the other hand, 42 (28.0%) have a pessimistic view of the possibility of full recovery of individuals with mental disorder. Sixty-eight ( 54.4 % ) of them associates subjects with mental disorder to strange and unpredictable behavior, 115 ( 92.0 % ), to low IQ, 35 ( 26.7 % ) and even to violent and dangerous behavior, 78 ( 62.4 % ) The data show a statistically significant (p = 0.001) relationship between the following variables: length of service in the NHS, fear of being close to individuals with mental illness and considering individuals with mental illness more dangerous than others. In statistical terms, there is a dependency between the two variables (X2 = 9.522, p> 0.05): the perception that "it is shameful to have a mental illness" and knowledge regarding mental illness. There is a positive and statistically significant weak correlation between knowledge of general practitioners (benefit from mental health training) and the perception of the risk factors (0,187; P0,039). DISCUSSION AND CONCLUSIONS: The lack of knowledge about the causes and risk factors for suicidal behavior, intervention and treatment, particularly in the context of mental illness options, may decreaseseeking for help by individual and their relatives. Negative perceptions such as considering that they dont deserve priority in services, myths (weak and cowards, always impulsive, seeking for attentions, spirituals problems) may indicate that general practitioners, may suffer the same stigma and beliefs systems as the general public, and can act accordingly (withdrawal and fear attitudes). Attitudes are influenced by factors such as education, culture and belief system. Subjects with good training in mental health have a positive and optimistic perception of the risk factors and a positiveattitude towards individuals with mental illness and suicidal behaviour.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Effects of medical therapy, alcohol, smoking, and endocrine disruptors on male infertility

Infertility affects up to 15% of the sexually active population, and in 50% of cases, a male factor is involved, either as a primary problem or in combination with a problem in the female partner. Because many commonly encountered drugs and medications can have a detrimental effect on male fertility, the medical evaluation should include a discussion regarding the use of recreational and illicit drugs, medications, and other substances that may impair fertility. With the knowledge of which drugs and medications may be detrimental to fertility, it may be possible to modify medication regimens or convince a patient to modify habits to decrease adverse effects on fertility and improve the chances of achieving a successful pregnancy. Concern is growing that male sexual development and reproduction have changed for the worse over the past 30 to 50 years. Although some reports find no changes, others suggest that sperm counts appear to be decreasing and that the incidence of developmental abnormalities such as hypospadias and cryptorchidism appears to be increasing, as is the incidence of testicular cancer. These concerns center around the possibility that our environment is contaminated with chemicals - both natural and synthetic - that can interact with the endocrine system.

A segurança dos consumidores

The present report, about consumer’s safety, shows the development of the knowledge on this particular subject and the actions carried out by entities that fight for the protection of consumer’s rights. The internship was based on the knowledge acquirement on the theoretical and practical aspects of the fight lead by the Direção Geral do Consumidor, together with other entities, towards the elimination or solely the reduction of risks caused by some products and services made available for the consumers or put on the market. During the internship, I counted with the support of my supervisor in the DGC, Dr. Ana Catarina Fonseca and, for the writing of the report, I had the help of my thesis advisor, Dr. Jorge Morais Carvalho, whenever I needed constructive criticism. My participation on the creation of the informative brochures about consumer’s safety, and the study of the legislation used by the DGC on the daily work, enabled me, effectively, to consolidate my guiding principles as a future professional on the matters of the creation of entities, private and public, which aim to ensure the protection of consumers’s rights, informing them of the possible risks or solving the already existing problems, removing dangerous products and services from the market.The report clarifies the action of the DGC on the protection of consumer’s safety, and enables some knowledge on the relations between the entities that work for the protection of the consumers and the market operators and on their work on identifying dangerous products and warning the consumers about it. The final part of this report contains information that allows us to form an idea of the importance that consumer safety has had in Cape Verde, compared with the laws of Portugal on the matter.

Fuel switching

The present Master dissertation is a project whose main objective is to identify value creation opportunities through fuel switching in the Portuguese industry, services, agriculture and fishing sectors. Fuel switching opportunities are characterized by type of fuel transition, type of technology transition, economy subsectors prone to have fuel switching and value created through fuel shift. Results suggest tomato concentrate, dairy, beer manufacturing and sugar refining subsectors is where prevalence of fuel oil steam boilers is high, for such cases conversion to natural gas steam boilers should result in operations having a ratio of NPV over CAPEX larger than ten and a payback period just under one year. Results further suggest food, beverages, textile, chemicals and wood subsectors currently operate between ten and twenty cogeneration Diesel engines that can be either modified to operate with natural gas or replaced by new natural gas cogeneration systems. Financial modeling indicates that both options have great value creation potential. The current analysis aims to be used by natural gas suppliers and energy project promoters to identify new potential deals as well as by heavy energy consumers to mitigate their energy related costs.

Prevention in underground construction with sequential excavation method

This paper aims to describe the Sequential Excavation Method, used for excava-tion in underground works, as well as the related risks and preventive measures. This method has characteristics that differentiate it from other tunnelling techniques: it uses a larger number of workers and equipment; it has a high concurrency of tasks with various workers and equip-ment quite exposed to hazards; and it uses many potentially aggressive chemicals. Firstly, it is given a broad overview of this issue. Afterwards, it will be presented the results of a survey to a sample of experienced technicians, aimed at gauging the relevance of a set of guidelines relat-ing to the design and work phases, applicable to the domestic market and prepared following technical visits to works abroad.

Estudo do trabalho numa empresa de produção de pneus e implementação de ferramentas Lean

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Algorithms and tools for in silico design of cell factories

PhD thesis in Bioengineering

Improvement of in silico strain engineering methods in Saccharomyces cerevisiae

PhD thesis in Bioengineering

A cost study of common surface finish systems for steel structures

This paper presents part of a study aimed at finding a suitable, yet cost-effective, surface finish for a steel structure subject to the car washing environment and corrosive chemicals. The initial, life cycle and average equivalent annual (AEAC) costs for surface finishing methods were calculated for a steel structure using the LCCC algorithm developed by American Galvanizers Association (AGA). The cost study consisted of 45 common surface finish systems including: hot-dip galvanization (HDG), metallization, acrylic, alkyd and epoxy as well as duplex coatings such as epoxy zinc and inorganic zinc (IOZ). The results show that initial, life cycle and AEAC costs for hot dip galvanization are the lowest among all the other methods, followed by coal tar epoxy painting. The annual average cost of HDG for this structure was estimated about €0.22/m2, while the other cost-effective alternatives were: IOZ, polyurea, epoxy waterborne and IOZ/epoxy duplex coating.