Micro-abrasion wear behaviour of TiAlCrSiN nanostructured coatings

The injection process of glass fibres reinforced plastics promotes the moulds surface degradation by erosion. In order to improve its wear resistance, several kinds of PVD thin hard coatings were used. It is well-known that nanostructures present a better compromise between hardness and toughness. Indeed, when the coating is constituted by a large number of ultra-thin different layers, cracks and interface troubles tend to decrease. However, it is not clear that these nanostructures present a better wear behaviour in erosion processes. In order to study its wear behaviour, a sputtered PVD nanostructured TiAlCrSiN coating was used. The substrate and film surfaces topography were analyzed by profilometry and atomic force microscopy techniques. Film adhesion to the substrate was evaluated by scratch tests. The surface hardness was measured with a Vickers micro-hardness tester. The wear resistance was evaluated by micro-abrasion with a rotating ball tribometer tests. Slurry of SiC particles in distilled water was used in order to provoke the surface abrasion. Different duration tests were performed in order to analyze the wear evolution. After these tests, the wear mechanisms developed were analyzed by scanning electron microscopy. Wear craters were measured and the wear rate was calculated and discussed. With the same purpose, coated inserts were mounted in an injection mould working with a 30% glass fibres reinforced polypropylene. After 45 000 cycles no relevant wear was registered.

Climbing robots: a survey of technologies and applications

The interest in the development of climbing robots is growing rapidly. Motivations are typically to increase the operation efficiency by obviating the costly assembly of scaffolding or to protect human health and safety in hazardous tasks. Climbing robots are starting to be developed for applications ranging from cleaning to inspection of difficult to reach constructions. These robots should be capable of travelling on different types of surfaces, with varying inclinations, such as floors, walls, ceilings, and to walk between such surfaces. Furthermore, these machines should be capable of adapting and reconfiguring for various environment conditions and to be self-contained. Regarding the adhesion to the surface, they should be able to produce a secure gripping force using a light-weight mechanism. This paper presents a survey of different applications and technologies proposed for the implementation of climbing robots.

A biocomposite of collagen nanofibers and nanohydroxyapatite for bone regeneration

This work aims to design a synthetic construct that mimics the natural bone extracellular matrix through innovative approaches based on simultaneous type I collagen electrospinning and nanophased hydroxyapatite (nanoHA) electrospraying using non-denaturating conditions and non-toxic reagents. The morphological results, assessed using scanning electron microscopy and atomic force microscopy (AFM), showed a mesh of collagen nanofibers embedded with crystals of HA with fiber diameters within the nanometer range (30 nm), thus significantly lower than those reported in the literature, over 200 nm. The mechanical properties, assessed by nanoindentation using AFM, exhibited elastic moduli between 0.3 and 2 GPa. Fourier transformed infrared spectrometry confirmed the collagenous integrity as well as the presence of nanoHA in the composite. The network architecture allows cell access to both collagen nanofibers and HA crystals as in the natural bone environment. The inclusion of nanoHA agglomerates by electrospraying in type I collagen nanofibers improved the adhesion and metabolic activity of MC3T3-E1 osteoblasts. This new nanostructured collagen–nanoHA composite holds great potential for healing bone defects or as a functional membrane for guided bone tissue regeneration and in treating bone diseases.

Development of new biomaterials based on liquid crystalline phases of cellulose derivatives

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Engenharia Biomédica

The friction force mouse-pad and the forearm muscles efforts (preliminary results)

The objective of the article is to evaluate the impact of the friction force mouse-pad in the contraction level of the forearm muscles M. extensor carpi ulnaris, M. extensor digitorum and M. extensor carpi radialis longus. A standard protocol of mouse movements was performed involving horizontal, vertical and diagonal mouse displacements drag-and-drop type. The operators were instructed to execute the protocol with their normal working speed. The movements protocol were performed by each subject (n=17) with three selected pairs mouse-pad, classified as low, medium and high friction force pairs. The mean time to execute the protocol with each mouse was ~138s. Mean values of ~13%MVE and ~17%MVE were found in the M. extensor carpi ulnaris and in the M. extensor digitorum respectively when performing the movements’ protocol. A 8.1% increase in %MVE was observed in the M. extensor digitorum and a 9.4% increase in %MVE was observed in the M. extensor carpi ulnaris when the high friction force pair was operated, relatively to the low friction force pair (p<0.05). The main preliminary conclusions of this study is that operating a high friction force mouse-pad may increase the risk to symptoms or disorders in the wrist due to an increase in the forearm muscles contraction levels, particularly during work with drawing application

European gendarmerie force

Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciência Política e Relações Internacionais, na variante de Estudos Europeus

Adhesion Prevention in Laparoscopic Surgery

Adhesions have important consequences for patients, surgeons, and health services. Peritonealtissue injury can be prevented by using careful surgical techniques. A large number of antiadhesion products have been used experimentally and clinically to prevent postoperative adhesions. Methods: The current author reviewed the surgical literature published about epidemiology, pathogenesis, and various prevention strategies of adhesion formation. Results: Meticulous surgery is essential to reduce unnecessary morbidity and mortality rates from these untoward effects of surgery. Several preventive agents against postoperative peritoneal adhesions have been investigated. Bioresorbable membranes are site-specific antiadhesion products but may be more difficult to use laparoscopically. Liquids and gels have the advantage of more-widespread areas of action and increased ease of use, particularly during laparoscopic operations. Effective pharmacologic agents that can reduce release of proinflammatory cytokines or activate peritoneal fibrinolysis are under development. Their results are encouraging but most of them are contradictory. Conclusions: Many modalities are being studied to reduce this risk; despite initial promising results of different measures in postoperative adhesion prevention, none of them have become standard applications. With the current state of knowledge, preclinical or clinical studies are still necessary to evaluate the effectiveness of the several proposed prevention strategies for avoiding postoperative peritoneal adhesions.

The Management of the Allergic Child at School: EAACI/GA2LEN Task Force on the Allergic Child at School

Allergy affects at least one-quarter of European schoolchildren, it reduces quality of life and may impair school performance; there is a risk of severe reactions and, in rare cases, death. Allergy is a multi-system disorder, and children often have several co-existing diseases, i.e. allergic rhinitis, asthma, eczema and food allergy. Severe food allergy reactions may occur for the first time at school, and overall 20% of food allergy reactions occur in schools. Up to two-thirds of schools have at least one child at risk of anaphylaxis but many are poorly prepared. A cooperative partnership between doctors, community and school nurses, school staff, parents and the child is necessary to ensure allergic children are protected. Schools and doctors should adopt a comprehensive approach to allergy training, ensuring that all staff can prevent, recognize and initiate treatment of allergic reactions.

Atomic force microscopy assisted with electron and ion beam microscopy for the direct measurement of biostructures and DNA samples

Dissertation to obtain a Master degree in Biotechnology

Molecular characterization of the fibrinogen-erythrocyte interaction and its influence on cardiovascular pathologies by AFM-based force spectroscopy

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Aplicação clínica - avaliação da técnica acoustic radiation force impulse

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

O uso da força no Direito Internacional = Use of force in Public International Law

Versão online da Revista Brasileira de Estudos Políticos, Belo Horizonte, nº 107, pp. 149-200, jul./dez.2013

Potential M&A between TIM Brazil and Oi S.A: The irreversible force of Telecommunications convergence

The intrinsic forces of market aiming for telecom industry convergence has arrived to Brazil. This case presents real characters, a sequence of events and other public information that has been impacting two corporations studied in this case. TIM Brazil and Oi S.A, two top players in the Brazilian telecom industry mobile and fixed segment respectively. While a merge between the two of them looks perfect and simple in an operational perspective due to its vertical complementarity, bring to them opportunities to win over a bundle offer (multi service package) that will consolidate their market predominance. Macroeconomic and internal corporate contrasts between these companies’ environment might signal that an impulsive could have a high price to pay in the future.

Behaviour of a dovetail joint solved using force analyses

Dovetail joints are one of the most cornrnonly used joints during Gothic and Baroque periods. Despite being coristructed in the sarne way during the ages, there is no analyticai solution available to help its analysis and design so required in reconstruction works of existing timber structures. An analytical solution based on the principie of virtual works under different types of loading is presented in this paper as weli as differences in bearing capacity of the joint for chosen types of loading, when different wood species are used. The accuracy of the presented solution is confirrned by data obtained from experimental tests of scaied modeis of a dovetail joint.