835 resultados para Idealized model for theory development


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The influence of vacancy concentration on the behavior of the three-dimensional random field Ising model with metastable dynamics is studied. We have focused our analysis on the number of spanning avalanches which allows us a clear determination of the critical line where the hysteresis loops change from continuous to discontinuous. By a detailed finite-size scaling analysis we determine the phase diagram and numerically estimate the critical exponents along the whole critical line. Finally, we discuss the origin of the curvature of the critical line at high vacancy concentration.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

TWEAK, a TNF family ligand with pleiotropic cellular functions, was originally described as capable of inducing tumor cell death in vitro. TWEAK functions by binding its receptor, Fn14, which is up-regulated on many human solid tumors. Herein, we show that intratumoral administration of TWEAK, delivered either by an adenoviral vector or in an immunoglobulin Fc-fusion form, results in significant inhibition of tumor growth in a breast xenograft model. To exploit the TWEAK-Fn14 pathway as a therapeutic target in oncology, we developed an anti-Fn14 agonistic antibody, BIIB036. Studies described herein show that BIIB036 binds specifically to Fn14 but not other members of the TNF receptor family, induces Fn14 signaling, and promotes tumor cell apoptosis in vitro. In vivo, BIIB036 effectively inhibits growth of tumors in multiple xenograft models, including colon (WiDr), breast (MDA-MB-231), and gastric (NCI-N87) tumors, regardless of tumor cell growth inhibition response observed to BIIB036 in vitro. The anti-tumor activity in these cell lines is not TNF-dependent. Increasing the antigen-binding valency of BIB036 significantly enhances its anti-tumor effect, suggesting the contribution of higher order cross-linking of the Fn14 receptor. Full Fc effector function is required for maximal activity of BIIB036 in vivo, likely due to the cross-linking effect and/or ADCC mediated tumor killing activity. Taken together, the anti-tumor properties of BIIB036 validate Fn14 as a promising target in oncology and demonstrate its potential therapeutic utility in multiple solid tumor indications.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tutkimuksessa haetaan vastausta kysymykseen: millaista tietoa ammattikorkeakoulun taloushallinnon laskentajärjestelmistä pitäisi saada, jotta se vastaisi tiedon tarvitsijoiden tarpeisiin, sekä ammattikorkeakoulun sisällä että organisaation sidosryhmiin nähden, mahdollisimman tarkoituksenmukaisesti ja tehokkaasti? Tavoitteina on selvittää taloushallinnon laskentajärjestelmien kehitystarpeet maksullisen palvelutoiminnan osalta ja vertailla kolmen eri ammattikorkeakoulun välillä taloushallinnon laskentajärjestelmistä saatavaa tietoa tuoden esille parhaat käytännöt ja tiedon-tuottamistavat. Tutkimus on rajattu koskemaan maksullista palvelutoimintaa ja tutkittavaa ilmiötä käsitellään ammattikorkeakoulun sisällä. Näkökulmina ovat johtajan ja päätöksentekijän, kehittäjän ja taloushallinto-osaston näkökulmat. Tutkimus on teemahaastatteluin toteutettava kvalita-tiivinen case-tutkimus, jonka lopputulemana syntyy 'Taloushallinnon raportoinnin johdonmukainen ja aktiivinen kehittäminen' -toimintamalli. Tutkimuksen teoria perustuu pääosin laskentatoimesta (strateginen, johdon ja rahoituksen laskentatoimi sekä laskentatoimi yrityksen informaatiojärjestelmänä), taloushallinnosta (mm.talousjohtaminen, taloushallinnon muuttuva rooli) sekä benchmarkingista kirjoitetulle kirjallisuudelle. Näistä muodostuu tutkimuksen teoreettinen viitekehys jaedelleen teemahaastattelu-lomake, joka toimii empiirisen osion tiedon hankinnan pohjana.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tämän pro gradu -tutkielman aiheena on yritysverkostojen kehittäminen sekä siihen liittyvät käsitteet ja menetelmät. Tutkielman tavoitteena on selkiyttää verkostoitumiseen, verkostosuhteen kehittymiseen ja yritysverkoston kehittämiseen liittyviä käsitteitä. Tutkielmassa verkostoitumista tarkastellaan transaktiokustannusteorian, resurssiperusteisen näkemyksen ja IMP-tutkimusryhmän vuorovaikutusnäkökulman mukaisesti. Verkostoituminen nähdään osana organisaation uudistumisprosessia ja sitä mallinnetaan verkostosuhteen kehittymisprosessin avulla. Verkoston kehittäminen on jatke organisaation uudistumisprosessille ja osa verkostosuhteen kehittymisprosessia. Verkoston kehittämiseen liittyen tutkielmassa tarkastellaan, miten verkoston kehittäminen eroaa yrityksen sisäisestä kehittämisestä, ja millaisia haasteita ja menestystekijöitä yhteisestä kehittämistoiminnasta on löydettävissä. Tutkielmassa luokitellaan myös kehittämiskohteita sekä tarkastellaan, millaisella kehittämistyön organisoitumismallilla sekä työkaluilla ja menetelmillä yritysverkoston kehittämistä voidaan tukea.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In The Cognitive-Emotional Brain, Pessoa (2013) suggests that cognition and emotion should not be considered separately. We agree with this and argue that cognitive architectures can provide steady ground for this kind of theory integration and for investigating interactions among underlying cognitive processes. We briefly explore how affective components can be implemented and how neuroimaging measures can help validate models and influence theory development.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis studies evaluation of software development practices through an error analysis. The work presents software development process, software testing, software errors, error classification and software process improvement methods. The practical part of the work presents results from the error analysis of one software process. It also gives improvement ideas for the project. It was noticed that the classification of the error data was inadequate in the project. Because of this it was impossible to use the error data effectively. With the error analysis we were able to show that there were deficiencies in design and analyzing phases, implementation phase and in testing phase. The work gives ideas for improving error classification and for software development practices.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this thesis is to develop an environment or network that enables effective collaborative product structure management among stakeholders in each unit, throughout the entire product lifecycle and product data management. This thesis uses framework models as an approach to the problem. Framework model methods for development of collaborative product structure management are proposed in this study, there are three unique models depicted to support collaborative product structure management: organization model, process model and product model. In the organization model, the formation of product data management system (eDSTAT) key user network is specified. In the process model, development is based on the case company’s product development matrix. In the product model framework, product model management, product knowledge management and design knowledge management are defined as development tools and collaboration is based on web-based product structure management. Collaborative management is executed using all these approaches. A case study from an actual project at the case company is presented as an implementation; this is to verify the models’ applicability. A computer assisted design tool and the web-based product structure manager, have been used as tools of this collaboration with the support of the key user. The current PDM system, eDSTAT, is used as a piloting case for key user role. The result of this development is that the role of key user as a collaboration channel is defined and established. The key user is able to provide one on one support for the elevator projects. Also the management activities are improved through the application of process workflow by following criteria for each project milestone. The development shows effectiveness of product structure management in product lifecycle, improved production process by eliminating barriers (e.g. improvement of two-way communication) during design phase and production phase. The key user role is applicable on a global scale in the company.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tutkimuksen päätavoite on tuottaa toiminnan kehittämismalli Kaartin Jääkärirykmentille, joka on yksi maavoimien joukko-osastoista. Tutkimuksen osatavoitteina on luoda yleinen malli joukko-osaston toiminnan kehittämisen osa-alueista, muodostaa luodun mallin perusteella kyselylomake kehityskohteiden kartoittamiseksi sekä laaditulla lomakkeella selvittää joukko-osaston toiminnan kehitystarpeita. Toiminnan kehittäminen nähdään tutkimuksessa toimintojen tai toimintatapojen kehittämisenä, ja sitä tarkastellaan laatujohtamisen näkökulmasta. Tutkimus on luonteeltaan laadullinen empiirinen tutkimus, jolla pyritään uuden mallin luomiseen. Tiedonkeruumenetelminä olivat kirjallisuuskatsaus, puolistrukturoidut haastattelut ja kyselytutkimus. Kirjallisuuskatsausta edusti perehtyminen laatujohtamisen teoriaan. Laatujohtamisen teoriaa täydennettiin kahdella asiantuntijahaastattelulla, joista toinen tehtiin laatujohtamisen teorian asiantuntijalle ja toinen käytännön asiantuntijalle. Lisäksi tutkimuksessa perehdyttiin puolustusvoimien laadunhallinnan ja toiminnan kehittämisen ohjeistukseen. Puolustusvoimien ohjeistusta edustivat Pääesikunnan ja Maavoimien Esikunnan ohjeasiakirjat sekä yhden esimerkkijoukko-osaston ohjeistus. Laatujohtamisen teorian ja puolustusvoimien ohjeistuksen perusteella muodostettiin yleinen malli joukko-osaston toiminnan kehittämisen osa-alueista. Malli oli samalla tutkimuksen ensimmäinen osatavoite. Mallin perusteella toiminnan kehittäminen koostuu: toiminnan vakioinnista, toiminnan arvioinnista, toiminnan jatkuvasta parantamisesta ja innovatiivisuudesta. Näiden neljän kokonaisuuden perusteella luotiin kyselylomake, siten, että samalla kyselylomakkeella pystyttiin kartoittamaan Kaartin Jääkärirykmentin nykyisen toiminnan mahdollisia kehitystarpeita ja myöhemmässä vaiheessa mittamaan toiminnan kehittymistä. Kyselylomakkeen muodostaminen oli samalla tutkimuksen toinen osatavoite. Kyselylomakkeen avulla toteutettiin kyselytutkimus kehitystarpeiden selvittämiseksi. Tämä oli tutkimuksen kolmas osatavoite. Kyselytutkimuksen tulosten perusteella eniten kehitettävää oli toiminnan jatkuvassa parantamisessa. Tulosten perusteella muodostettiin vuosisuunnittelurytmiin sidottu, itsearviointiin ja yhteen jatkuvan parantamisen malliin pohjautuva, toiminnan kehittämisen malli Kaartin Jääkärirykmentille.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this study was to simulate blood flow in thoracic human aorta and understand the role of flow dynamics in the initialization and localization of atherosclerotic plaque in human thoracic aorta. The blood flow dynamics in idealized and realistic models of human thoracic aorta were numerically simulated in three idealized and two realistic thoracic aorta models. The idealized models of thoracic aorta were reconstructed with measurements available from literature, and the realistic models of thoracic aorta were constructed by image processing Computed Tomographic (CT) images. The CT images were made available by South Karelia Central Hospital in Lappeenranta. The reconstruction of thoracic aorta consisted of operations, such as contrast adjustment, image segmentations, and 3D surface rendering. Additional design operations were performed to make the aorta model compatible for the numerical method based computer code. The image processing and design operations were performed with specialized medical image processing software. Pulsatile pressure and velocity boundary conditions were deployed as inlet boundary conditions. The blood flow was assumed homogeneous and incompressible. The blood was assumed to be a Newtonian fluid. The simulations with idealized models of thoracic aorta were carried out with Finite Element Method based computer code, while the simulations with realistic models of thoracic aorta were carried out with Finite Volume Method based computer code. Simulations were carried out for four cardiac cycles. The distribution of flow, pressure and Wall Shear Stress (WSS) observed during the fourth cardiac cycle were extensively analyzed. The aim of carrying out the simulations with idealized model was to get an estimate of flow dynamics in a realistic aorta model. The motive behind the choice of three aorta models with distinct features was to understand the dependence of flow dynamics on aorta anatomy. Highly disturbed and nonuniform distribution of velocity and WSS was observed in aortic arch, near brachiocephalic, left common artery, and left subclavian artery. On the other hand, the WSS profiles at the roots of branches show significant differences with geometry variation of aorta and branches. The comparison of instantaneous WSS profiles revealed that the model with straight branching arteries had relatively lower WSS compared to that in the aorta model with curved branches. In addition to this, significant differences were observed in the spatial and temporal profiles of WSS, flow, and pressure. The study with idealized model was extended to study blood flow in thoracic aorta under the effects of hypertension and hypotension. One of the idealized aorta models was modified along with the boundary conditions to mimic the thoracic aorta under the effects of hypertension and hypotension. The results of simulations with realistic models extracted from CT scans demonstrated more realistic flow dynamics than that in the idealized models. During systole, the velocity in ascending aorta was skewed towards the outer wall of aortic arch. The flow develops secondary flow patterns as it moves downstream towards aortic arch. Unlike idealized models, the distribution of flow was nonplanar and heavily guided by the artery anatomy. Flow cavitation was observed in the aorta model which was imaged giving longer branches. This could not be properly observed in the model with imaging containing a shorter length for aortic branches. The flow circulation was also observed in the inner wall of the aortic arch. However, during the diastole, the flow profiles were almost flat and regular due the acceleration of flow at the inlet. The flow profiles were weakly turbulent during the flow reversal. The complex flow patterns caused a non-uniform distribution of WSS. High WSS was distributed at the junction of branches and aortic arch. Low WSS was distributed at the proximal part of the junction, while intermedium WSS was distributed in the distal part of the junction. The pulsatile nature of the inflow caused oscillating WSS at the branch entry region and inner curvature of aortic arch. Based on the WSS distribution in the realistic model, one of the aorta models was altered to induce artificial atherosclerotic plaque at the branch entry region and inner curvature of aortic arch. Atherosclerotic plaque causing 50% blockage of lumen was introduced in brachiocephalic artery, common carotid artery, left subclavian artery, and aortic arch. The aim of this part of the study was first to study the effect of stenosis on flow and WSS distribution, understand the effect of shape of atherosclerotic plaque on flow and WSS distribution, and finally to investigate the effect of lumen blockage severity on flow and WSS distributions. The results revealed that the distribution of WSS is significantly affected by plaque with mere 50% stenosis. The asymmetric shape of stenosis causes higher WSS in branching arteries than in the cases with symmetric plaque. The flow dynamics within thoracic aorta models has been extensively studied and reported here. The effects of pressure and arterial anatomy on the flow dynamic were investigated. The distribution of complex flow and WSS is correlated with the localization of atherosclerosis. With the available results we can conclude that the thoracic aorta, with complex anatomy is the most vulnerable artery for the localization and development of atherosclerosis. The flow dynamics and arterial anatomy play a role in the localization of atherosclerosis. The patient specific image based models can be used to diagnose the locations in the aorta vulnerable to the development of arterial diseases such as atherosclerosis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this dissertation is to develop a theory on intercultural caring to deepen the understanding of caring between nurses and patients who have different cultural backgrounds. The research questions are: 1) What is intercultural caring? 2) How is intercultural caring described and understood? 3) How is intercultural caring described and understood in a maternity care context from the patients’ perspective? 4) What is the substance in a theory on intercultural caring? 5) What is the substance in a theory on intercultural caring in maternity care from the patients’ perspective? The theoretical perspective is based on caritative theory and the caring science-tradition (Eriksson, 2001, 2002) and has a hermeneutic approach. In the first study, 19 texts of Campinha-Bacote, Kim-Godwin, Leininger and Ray are analysed through content analysis. A model for intercultural caring is then created abductively. The second study is a metasynthesis of 40 studies on intercultural caring in maternity care research. The third study is a focused ethnography, in which 17 immigrant mothers are interviewed and observed. The theory on intercultural caring is created through a hermeneutic synthesis of the three studies. A synthesis of the studies with a maternity context results in five patterns of interpretation: the experience of caring is related to power; the family is always present; childbearing and change of culture can give women multiple vulnerabilities; both the mother and the nurse change when they meet; conflicts can cause change. The theory and patterns of interpretation consolidate into a contextual theory on intercultural caring for clinical maternity praxis. In this theory, caring consists of four dimensions: universal, cultural, contextual, and unique caring, which permeate each other. Universal caring is nondependent of time and space. Cultural caring considers the cultural background, the acculturation and the equality of each mother. In the maternity care culture, cultural competence, cultural safety, and acculturation of the nurse are emphasised. Contextual caring considers the specific cultural features of the childbearing mother. In this respect, the nurse is expected to be an expert and to clarify cultural assumptions in maternity care. In unique caring, the mother expects good communication, respect for the family, goodwill and somebody who cares for her and meets her needs, in order for trust to be built. In this respect, the nurse listens to the woman’s narrative, is flexible, open, courageous, and non-judgemental. The nurse shows an understanding for the life situation of the woman, and strives for continuity to preserve the care relationship. It was found that external circumstances affect intercultural caring. Moreover, intercultural caring is expected to decrease misunderstandings and conflicts, alleviate suffering and promote health and life. The theory adds knowledge to the phenomenon of intercultural caring for the nursing and caring sciences, and for the nursing care of patients with other cultural backgrounds than the nurses. The theory can be used in nursing, education, research and administration.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The thesis is rooted in caring science and the notion that the human being is an indivisible unity of body, soul and spirit. The purpose is to search for new, or expanded knowledge and understanding of the substance of the human’s spiritual space, as well as aspects that may constitute a foundation for the safeguard of human dignity. The clinical research study concerns the importance of spirituality and dignity in the care for older people. The thesis consists of three substudies with four articles, and the methodology is based on Gadamer’s philosophical hermeneutics. Through a metasynthesis of 17 research articles, sub-study I searched for understanding of the concept of spirituality as it may appear in reality (deduction). 17 older people were interviewed in sub-study II. This sub-study sought understanding for spirituality and dignity in the specific reality (induction). Sub-study III searched for theory development regarding spirituality, through a literature review of 20 research articles and a text by Tillich (abduction). The findings imply that spirituality entails human beings’ connectedness with one’s inner space and connectedness beyond oneself. Love in connectedness appears as a force in both spirituality and dignity. Themes portrayed include understanding of the spiritual space, religiousness, dignity, and spiritual care. The relationship between dignity and spirituality can be seen in the confirmation of human worth and care for the whole human being, including the spiritual dimension, and this is understood as a prerequisite for perceived dignity. It seems to be important that older people feel valued, loved, not abandoned, and alive. The theoretical model portrays love as a reunifying and connecting force that may foster confirmation, serving, longing and holiness. The movement towards connectedness may create room for the human being’s perception of dignity and holiness, and as such, it may be a force in the search for wholeness and becoming in health.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis studies the possibility to use lean tools and methods in a quotation process which is carried out in an office environment. The aim of the study was to find out and test the relevant lean tools and methods which can help to balance and standardize the quotation process, and reduce the variance in quotation lead times and in quality. Seminal works, researches and guide books related to the topic were used as the basis for the theory development. Based on the literature review and the case company’s own lean experience, the applicable lean tools and methods were selected to be tested by a sales support team. Leveling production, by product categorization and value stream mapping, was a key method to be used to balance the quotation process. 5S method was started concurrently for standardizing the work. Results of the testing period showed that lean tools and methods are applicable in office process and selected tools and methods helped to balance and standardize the quotation process. Case company’s sales support team decided to implement new lean based quotation process model.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Changes in vascular endothelial growth factor (VEGF) in pulmonary vessels have been described in congenital diaphragmatic hernia (CDH) and may contribute to the development of pulmonary hypoplasia and hypertension; however, how the expression of VEGF receptors changes during fetal lung development in CDH is not understood. The aim of this study was to compare morphological evolution with expression of VEGF receptors, VEGFR1 (Flt-1) and VEGFR2 (Flk-1), in pseudoglandular, canalicular, and saccular stages of lung development in normal rat fetuses and in fetuses with CDH. Pregnant rats were divided into four groups (n=20 fetuses each) of four different gestational days (GD) 18.5, 19.5, 20.5, 21.5: external control (EC), exposed to olive oil (OO), exposed to 100 mg nitrofen, by gavage, without CDH (N-), and exposed to nitrofen with CDH (CDH) on GD 9.5 (term=22 days). The morphological variables studied were: body weight (BW), total lung weight (TLW), left lung weight, TLW/BW ratio, total lung volume, and left lung volume. The histometric variables studied were: left lung parenchymal area density and left lung parenchymal volume. VEGFR1 and VEGFR2 expression were determined by Western blotting. The data were analyzed using analysis of variance with the Tukey-Kramer post hoc test. CDH frequency was 37% (80/216). All the morphological and histometric variables were reduced in the N- and CDH groups compared with the controls, and reductions were more pronounced in the CDH group (P<0.05) and more evident on GD 20.5 and GD 21.5. Similar results were observed for VEGFR1 and VEGFR2 expression. We conclude that N- and CDH fetuses showed primary pulmonary hypoplasia, with a decrease in VEGFR1 and VEGFR2 expression.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The last several decades have been marked by tremendous changes in education - technological, pedagogical, administrative, and social. These changes have led to considerable increments in the budgets devoted to professional development for teachers ~ with the express purpose of helping them accommodate their practices to the new realities oftheir classrooms. However, research has suggested that, in spite of the emphasis placed on encouraging sustained change in teaching practices, little has been accomplished. This begs the question of what ought to be done to not only reverse this outcome, but contribute to transformational change. The literature suggests some possibilities including: a) considering teachers as learners and applying what, is known about cognition and learning; b) modifying the location and nature ofprofessional development so that it is authentic, based in the classroom and focusing on tasks meaningful to the teacher; c) attending to the infrastructure underlying professional development; and d) ensuring opportunities for reflective practice. This dissertation looks at the impact of each ofthese variables through an analysis ofthe learning journeys of a group ofteachers engaged in a program called GrassRoots in one midsized school board in Ontario. Action research was conducted by the researcher in his role as consultant facilitating teacher professional growth around the use of Web sites as culminating performance tasks by students. Research focused on the pedagogical approach to the learning of the teachers involved and the infrastructure underlying their learning. Using grounded theory, a model for professional development was developed that can be used in the future to inform practices and, hopefully, lead to sustained transformational school change.