Characterization of a Canadian mink H3N2 influenza A virus isolate genetically related to triple reassortant swine influenza virus.

In 2007, an H3N2 influenza A virus was isolated from Canadian mink. This virus was found to be phylogenetically related to a triple reassortant influenza virus which emerged in Canadian swine in 2005, but it is antigenically distinct. The transmission of the virus from swine to mink seems to have occurred following the feeding of animals with a ration composed of uncooked meat by-products of swine obtained from slaughterhouse facilities. Serological analyses suggest that the mink influenza virus does not circulate in the swine population. Presently, the prevalence of influenza virus in Canadian farmed and wild mink populations is unknown. The natural occurrence of influenza virus infection in mink with the presence of clinical signs is a rare event that deserves to be reported.

Development and use of a multiplex real-time quantitative polymerase chain reaction assay for detection and differentiation of Porcine circovirus-2 genotypes 2a and 2b in an epidemiological survey.

By the end of 2004, the Canadian swine population had experienced a severe 2 increase in the incidence of Porcine circovirus-associated disease (PCVAD), a problem that was 3 associated with the emergence of a new Porcine circovirus-2 genotype (PCV-2b), previously 4 unrecovered in North America. Thus it became important to develop a diagnostic tool that could 5 differentiate between the old and new circulating genotypes (PCV-2a and -2b, respectively). 6 Consequently, a multiplex real-time quantitative polymerase chain reaction (mrtqPCR) assay that 7 could sensitively and specifically identify and differentiate PCV-2 genotypes was developed. A 8 retrospective epidemiological survey that used the mrtqPCR assay was performed to determine if 9 cofactors could affect the risk of PCVAD. From 121 PCV-2–positive cases gathered for this 10 study, 4.13%, 92.56% and 3.31% were positive for PCV-2a, PCV-2b, and both genotypes, 11 respectively. In a data analysis using univariate logistic regressions, PCVAD compatible 12 (PCVAD/c) score was significantly associated with the presence of Porcine reproductive and 13 respiratory syndrome virus (PRRSV), PRRSV viral load, PCV-2 viral load, and PCV-2 14 immunohistochemistry (IHC) results. Polytomous logistic regression analysis revealed that 15 PCVAD/c score was affected by PCV-2 viral load (P = 0.0161) and IHC (P = 0.0128), but not by 16 the PRRSV variables (P > 0.9); suggesting that mrtqPCR in tissue is a reliable alternative to IHC. 17 Logistic regression analyses revealed that PCV-2 increased the odds ratio of isolating 2 major 18 swine pathogens of the respiratory tract, Actinobacillus pleuropneumoniae and Streptococcus 19 suis serotypes 1/2, 1, 2, 3, 4, and 7, which are serotypes commonly associated with clinical 20 diseases.

Les vidéos de gay bashing : des agresseurs à YouTube

La recherche portera sur la montée des vidéos de gay bashing depuis 2013. Par vidéo de gay bashing, nous entendons des vidéos documentant l’abus physique ou verbal d’individus perçus par les agresseurs comme étant gais, lesbiennes, bisexuels, transgenres ou queer, mais nous nous concentrerons spécifiquement sur des vidéos montrant des agressions envers des hommes. Ces vidéos peuvent être enregistrées par les agresseurs eux-mêmes ou par des témoins de la scène. Il s’agira de situer cette montée dans un contexte politique de retour de lois et sentiments anti-LGBT dans les pays d’où proviennent certaines des vidéos étudiées et par rapport aux différentes théories anthropologiques et socio-historiques concernant les sources et motivations derrière les actes de violence homophobe. Le corpus se composera de trois vidéos venant de Russie («Putin’s Crackdown on LGBT Teens un Russia»), de Lybie («Gay torture and violent in Lybia») et des États-Unis («Attack at gay pride event in Detroit»). L’analyse du corpus se fera en trois temps : d’abord l’analyse de la forme et du contenu des vidéos en tant que tels, ensuite, l’analyse de leur circulation et des différents utilisateurs qui distribuent les vidéos en ligne, et, finalement, l’analyse de la réception des vidéos en portant attention aux commentaires des utilisateurs. Il s’agira de montrer comment les vidéos de gay-bashing effectuent une rupture par rapport à une vision de YouTube, et autres médias sociaux, comme libérateurs et comme lieux d’expression de soi (particulièrement pour les membres des communautés LGBT) et les transforment en lieux d’une humiliation triplée par l’enregistrement de l’humiliation physique et sa diffusion sur le web. Il s’agira ensuite de voir comment la circulation et la redistribution de ces vidéos par différents groupes et utilisateurs les instrumentalisent selon différents agendas politiques et idéologiques, pour finalement se questionner, en s’inspirant du triangle de l’humiliation de Donald Klein, sur le rôle ambivalent du témoin (physique ou virtuel) dont la présence est nécessaire pour qu’il y ait humiliation. Finalement, nous nous intéresserons aux vidéos de témoignages de gay-bashing, vidéos faites par les victimes elles-mêmes, racontant leur traumatisme à la caméra, renouant ainsi avec les vidéos de coming out sous la forme de l’aveu et de la spectacularisation du soi. La présente recherche sera également l’occasion de développer des outils théoriques et méthodologiques propres aux nouveaux médias et aux nouvelles formes et contenus qui s’y développent.

Les seules règles de droit qui peuvent poser des limites aux droits et libertés constitutionnellement protégés et l'arrêt Slaight Communications

Cet article de Danielle Pinard a précédemment été publié par la Revue nationale de droit constitutionnel. Reproduit avec l’autorisation de Carswell, une société de Thomson Reuters Canada limitée.

Mathematical Modelling of the Dynamics of Granular Materials in a Rotating Cylinder

The current study is aimed at the development of a theoretical simulation tool based on Discrete Element Method (DEM) to 'interpret granular dynamics of solid bed in the cross section of the horizontal rotating cylinder at the microscopic level and subsequently apply this model to establish the transition behaviour, mixing and segregation.The simulation of the granular motion developed in this work is based on solving Newton's equation of motion for each particle in the granular bed subjected to the collisional forces, external forces and boundary forces. At every instant of time, the forces are tracked and the positions velocities and accelarations of each partcle is The software code for this simulation is written in VISUAL FORTRAN 90 After checking the validity of the code with special tests, it is used to investigate the transition behaviour of granular solids motion in the cross section of a rotating cylinder for various rotational speeds and fill fraction.This work is hence directed towards a theoretical investigation based on Discrete Element Method (DEM) of the motion of granular solids in the radial direction of the horizontal cylinder to elucidate the relationship between the operating parameters of the rotating cylinder geometry and physical properties ofthe granular solid.The operating parameters of the rotating cylinder include the various rotational velocities of the cylinder and volumetric fill. The physical properties of the granular solids include particle sizes, densities, stiffness coefficients, and coefficient of friction Further the work highlights the fundamental basis for the important phenomena of the system namely; (i) the different modes of solids motion observed in a transverse crosssection of the rotating cylinder for various rotational speeds, (ii) the radial mixing of the granular solid in terms of active layer depth (iii) rate coefficient of mixing as well as the transition behaviour in terms of the bed turnover time and rotational speed and (iv) the segregation mechanisms resulting from differences in the size and density of particles.The transition behaviour involving its six different modes of motion of the granular solid bed is quantified in terms of Froude number and the results obtained are validated with experimental and theoretical results reported in the literature The transition from slumping to rolling mode is quantified using the bed turnover time and a linear relationship is established between the bed turn over time and the inverse of the rotational speed of the cylinder as predicted by Davidson et al. [2000]. The effect of the rotational speed, fill fraction and coefficient of friction on the dynamic angle of repose are presented and discussed. The variation of active layer depth with respect to fill fraction and rotational speed have been investigated. The results obtained through simulation are compared with the experimental results reported by Van Puyvelde et. at. [2000] and Ding et at. [2002].The theoretical model has been further extended, to study the rmxmg and segregation in the transverse direction for different particle sizes and their size ratios. The effect of fill fraction and rotational speed on the transverse mixing behaviour is presented in the form of a mixing index and mixing kinetics curve. The segregation pattern obtained by the simulation of the granular solid bed with respect to the rotational speed of the cylinder is presented both in graphical and numerical forms. The segregation behaviour of the granular solid bed with respect to particle size, density and volume fraction of particle size has been investigated. Several important macro parameters characterising segregation such as mixing index, percolation index and segregation index have been derived from the simulation tool based on first principles developed in this work.

Systematic trends in self-consistent calculations of linear quantum wires

Systematic trends in the properties of a linear split-gate heterojunction are studied by solving iteratively the Poisson and Schrödinger equations for different gate potentials and temperatures. A two-dimensional approximation is presented that is much simpler in the numerical implementation and that accurately reproduces all significant trends. In deriving this approximation, we provide a rigorous and quantitative basis for the formulation of models that assumes a two-dimensional character for the electron gas at the junction.

Systematics of properties of the electron gas in deep-etched quantum wires

An efficient method is developed for an iterative solution of the Poisson and Schro¿dinger equations, which allows systematic studies of the properties of the electron gas in linear deep-etched quantum wires. A much simpler two-dimensional (2D) approximation is developed that accurately reproduces the results of the 3D calculations. A 2D Thomas-Fermi approximation is then derived, and shown to give a good account of average properties. Further, we prove that an analytic form due to Shikin et al. is a good approximation to the electron density given by the self-consistent methods.

Quantum wire with periodic serial structure

Electron wave motion in a quantum wire with periodic structure is treated by direct solution of the Schrödinger equation as a mode-matching problem. Our method is particularly useful for a wire consisting of several distinct units, where the total transfer matrix for wave propagation is just the product of those for its basic units. It is generally applicable to any linearly connected serial device, and it can be implemented on a small computer. The one-dimensional mesoscopic crystal recently considered by Ulloa, Castaño, and Kirczenow [Phys. Rev. B 41, 12 350 (1990)] is discussed with our method, and is shown to be a strictly one-dimensional problem. Electron motion in the multiple-stub T-shaped potential well considered by Sols et al. [J. Appl. Phys. 66, 3892 (1989)] is also treated. A structure combining features of both of these is investigated

Model of single-electron decay from a strongly isolated quantum dot

Recent measurements of electron escape from a nonequilibrium charged quantum dot are interpreted within a two-dimensional (2D) separable model. The confining potential is derived from 3D self-consistent Poisson-Thomas-Fermi calculations. It is found that the sequence of decay lifetimes provides a sensitive test of the confining potential and its dependence on electron occupation

Continuum bound states as surface states of a finite periodic system

We discuss the relation between continuum bound states (CBSs) localized on a defect, and surface states of a finite periodic system. We model an experiment of Capasso et al. [F. Capasso, C. Sirtori, J. Faist, D. L. Sivco, S-N. G. Chu, and A. Y. Cho, Nature (London) 358, 565 (1992)] using the transfer-matrix method. We compute the rate for intrasubband transitions from the ground state to the CBS and derive a sum rule. Finally we show how to improve the confinement of a CBS while keeping the energy fixed.

Design of electron band pass filters for electrically biased finite superlattices

We design optimal band pass filters for electrons in semiconductor heterostructures, under a uniform applied electric field. The inner cells are chosen to provide a desired transmission window. The outer cells are then designed to transform purely incoming or outgoing waves into Bloch states of the inner cells. The transfer matrix is interpreted as a conformal mapping in the complex plane, which allows us to write constraints on the outer cell parameters, from which physically useful values can be obtained.

Pi: A Parallel Architecture Interface for Multi-Model Execution

This thesis defines Pi, a parallel architecture interface that separates model and machine issues, allowing them to be addressed independently. This provides greater flexibility for both the model and machine builder. Pi addresses a set of common parallel model requirements including low latency communication, fast task switching, low cost synchronization, efficient storage management, the ability to exploit locality, and efficient support for sequential code. Since Pi provides generic parallel operations, it can efficiently support many parallel programming models including hybrids of existing models. Pi also forms a basis of comparison for architectural components.