Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

Fostering e-participation sustainability through a BPM-driven semantic model

According to a recent Eurobarometer survey (2014), 68% of Europeans tend not to trust national governments. As the increasing alienation of citizens from politics endangers democracy and welfare, governments, practitioners and researchers look for innovative means to engage citizens in policy matters. One of the measures intended to overcome the so-called democratic deficit is the promotion of civic participation. Digital media proliferation offers a set of novel characteristics related to interactivity, ubiquitous connectivity, social networking and inclusiveness that enable new forms of societal-wide collaboration with a potential impact on leveraging participative democracy. Following this trend, e-Participation is an emerging research area that consists in the use of Information and Communication Technologies to mediate and transform the relations among citizens and governments towards increasing citizens’ participation in public decision-making. However, despite the widespread efforts to implement e-Participation through research programs, new technologies and projects, exhaustive studies on the achieved outcomes reveal that it has not yet been successfully incorporated in institutional politics. Given the problems underlying e-Participation implementation, the present research suggested that, rather than project-oriented efforts, the cornerstone for successfully implementing e-Participation in public institutions as a sustainable added-value activity is a systematic organisational planning, embodying the principles of open-governance and open-engagement. It further suggested that BPM, as a management discipline, can act as a catalyst to enable the desired transformations towards value creation throughout the policy-making cycle, including political, organisational and, ultimately, citizen value. Following these findings, the primary objective of this research was to provide an instrumental model to foster e-Participation sustainability across Government and Public Administration towards a participatory, inclusive, collaborative and deliberative democracy. The developed artefact, consisting in an e-Participation Organisational Semantic Model (ePOSM) underpinned by a BPM-steered approach, introduces this vision. This approach to e-Participation was modelled through a semi-formal lightweight ontology stack structured in four sub-ontologies, namely e-Participation Strategy, Organisational Units, Functions and Roles. The ePOSM facilitates e-Participation sustainability by: (1) Promoting a common and cross-functional understanding of the concepts underlying e-Participation implementation and of their articulation that bridges the gap between technical and non-technical users; (2) Providing an organisational model which allows a centralised and consistent roll-out of strategy-driven e-Participation initiatives, supported by operational units dedicated to the execution of transformation projects and participatory processes; (3) Providing a standardised organisational structure, goals, functions and roles related to e-Participation processes that enhances process-level interoperability among government agencies; (4) Providing a representation usable in software development for business processes’ automation, which allows advanced querying using a reasoner or inference engine to retrieve concrete and specific information about the e-Participation processes in place. An evaluation of the achieved outcomes, as well a comparative analysis with existent models, suggested that this innovative approach tackling the organisational planning dimension can constitute a stepping stone to harness e-Participation value.

Factors that determine the level of care children and adolescents experiencing mental disorders receive

RESUMO: Resumo Uma prestação de serviços de saúde mental para crianças e adolescentes (CAMHS) oportuna, eficaz e baseada na evidência pode evitar incapacidade a longo prazo. No entanto, estes serviços são criticamente sub-financiados em todo o mundo. É um imperativo garantir que este precioso recurso não seja desperdiçado. Os governos e outras partes interessadas relevantes na área da saúde mental precisam de conhecer o estado de saúde mental da população, quais os recursos disponíveis e como melhor utilizar os recursos disponíveis para orientar uma política e decisões efectivas sobre os níveis de serviços. Objetivo: O objetivo deste artigo é explorar o papel da acuidade, gravidade e complexidade na determinação dos cuidados em saúde mental especializados recebidos por crianças e adolescentes que sofrem perturbações mentais. Métodos: Este estudo é exploratório envolvendo uma revisão sistemática da literatura. Foi realizada uma pesquisa com palavras-chave utilizando bases de dados PsychINFO, EMBASE, PubMed e MEDLINE. A literatura cinzenta também foi investigada com um enfoque nas abordagens sistémicas, organizacionais e políticas para a organização e comissionamento de CAMHS. Foram selecionados apenas documentos escritos em Inglês. Três países, Bélgica, Reino Unido e Estados Unidos, todos eles com modelos muito diferentes de organização de CAMHS, foram revistos para investigar de que forma os conceitos de acuidade, gravidade e complexidade foram utilizados na sua concepção de serviços para determinar o nível da assistência prestada. Resultados: Nem a Bélgica, nem o modelo norte-americano de CAMHS organização de serviço parecem estar alinhados com os principais conceitos na determinação do nível de prestação de serviços. O sistema de serviços do Reino Unido de CAMHS está mais estreitamente alinhado com esses conceitos e tem uma alocação de recursos mais equilibrada entre o hospital e a comunidade. O seu ponto fraco está na falta de flexibilidade entre os níveis de serviço e na falta de apoio para com o sector dos cuidados de saúde primários. Conclusões: A variabilidade na alocação de recursos a diferentes níveis especializados de CAMHS (em regime de internamento, ambulatório, e na comunidade) e o modelo diferente de estrutura de serviços entre os países estudados indica uma inconsistência na forma como as crianças e adolescentes que apresentam aos CAMHS são referenciados para os cuidados que recebem. Isto põe em questão se as crianças e adolescentes com perturbações mentais estão a receber o nível e tipo de cuidados concordantes com as suas necessidades. A concepção e o comissionamento de sistemas de CAMHS levam-nos à discussão de uma série de princípios fundamentais que devem ser considerados. O sistema perfeito no entanto, ainda está para ser encontrado. -------------------------------- ABSTRACT: Provision of timely, effective, evidence based mental health services to children and adolescents can prevent long term impairment, but they are critically underfunded across the globe. There is an imperative to ensure this precious resource is not wasted. Governments and other relevant mental health stakeholders need to know the mental health status of the population, what resources are available and how best to use the resources available to guide effective policy and decisions about service levels. Aim: The aim of this paper is to explore the role of acuity, severity and complexity in determining the specialist mental health care that children and adolescents experiencing mental disorders receive. Methods: This study is exploratory involving a systematic scan of the literature. A key word search was conducted using databases PSYCHINFO, EMBASE, PUBMED and MEDLINE. Grey literature was also searched to focus on systemic, organisational and policy approaches to the organisation and commissioning of CAMHS. Only documents written in English were selected. Three countries Belgium, UK and the US all with very different models of service organisation for CAMHS were reviewed to investigate how well the concepts of acuity, severity and complexity were used to determine the level of care delivered in their service design. Findings: Neither the Belgium nor the US model of CAMHS service organisation appear to align with the key concepts driving intensity of level of service provision. The UK CAMHS service system most closely aligns with the concepts. It has a more balanced resource allocation between hospital and community. Its downfall is in its lack of flexibility between service levels and its lack of support for the primary care sector. Conclusions: The variability in resource allocation to different service levels (inpatient, outpatient, community) within specialist CAMHS and the differing model of service structure across countries indicates an inconsistency in how children and adolescents presenting to CAMHS are allocated to the care they receive. This puts into question whether children and adolescent with mental disorders are receiving a level and type of care commensurate with their needs. In commissioning and designing CAMHS systems a number of key principles that should be considered are discussed. The perfect system however, is yet to be found.

Ajustamento pelo risco : da conceptualização à operacionalização

RESUMO - As organizações de saúde, em geral, e os hospitais, em particular, são frequentemente reconhecidos por terem particularidades e especificidades que conferem uma especial complexidade ao seu processo produtivo e à sua gestão (Jacobs, 1974; Butler, 1995). Neste sentido, na literatura hospitalar emergem alguns temas como prioritários tanto na investigação como na avaliação do seu funcionamento, nomeadamente os relacionados com a produção, com o financiamento, com a qualidade, com a eficiência e com a avaliação do seu desempenho. O estado da arte da avaliação do desempenho das organizações de saúde parece seguir a trilogia definida por Donabedian (1985) — Estrutura, Processo e Resultados. Existem diversas perspectivas para a avaliação do desempenho na óptica dos Resultados — efectividade, eficiência ou desempenho financeiro. No entanto, qualquer que seja a utilizada, o ajustamento pelo risco é necessário para se avaliar a actividade das organizações de saúde, como forma de medir as características dos doentes que podem influenciar os resultados de saúde. Como possíveis indicadores de resultados, existem a mortalidade (resultados finais), as complicações e as readmissões (resultados intermédios). Com excepção dos estudos realizados por Thomas (1996) e Thomas e Hofer (1998 e 1999), praticamente ninguém contesta a relação entre estes indicadores e a efectividade dos cuidados. Chamando, no entanto, a atenção para a necessidade de se definirem modelos de ajustamento pelo risco e ainda para algumas dificuldades conceptuais e operacionais para se atingir este objectivo. Em relação à eficiência técnica dos hospitais, os indicadores tradicionalmente mais utilizados para a sua avaliação são os custos médios e a demora média. Também neste domínio, a grande maioria dos estudos aponta para que a gravidade aumenta o poder justificativo do consumo de recursos e que o ajustamento pelo risco é útil para avaliar a eficiência dos hospitais. Em relação aos sistemas usados para medir a severidade e, consequentemente, ajustar pelo risco, o seu desenvolvimento apresenta, na generalidade, dois tipos de preocupações: a definição dos suportes de recolha da informação e a definição dos momentos de medição. Em última instância, o dilema que se coloca reside na definição de prioridades e daquilo que se pretende sacrificar. Quando se entende que os aspectos financeiros são determinantes, então será natural que se privilegie o recurso quase exclusivo a elementos dos resumos de alta como suporte de recolha da informação. Quando se defende que a validade de construção e de conteúdo é um aspecto a preservar, então o recurso aos elementos dos processos clínicos é inevitável. A definição dos momentos de medição dos dados tem repercussões em dois níveis de análise: na neutralidade económica do sistema e na prospectividade do sistema. O impacto destas questões na avaliação da efectividade e da eficiência dos hospitais não é uma questão pacífica, visto que existem autores que defendem a utilização de modelos baseados nos resumos de alta, enquanto outros defendem a supremacia dos modelos baseados nos dados dos processos clínicos, para finalmente outros argumentarem que a utilização de uns ou outros é indiferente, pelo que o processo de escolha deve obedecer a critérios mais pragmáticos, como a sua exequibilidade e os respectivos custos de implementação e de exploração. Em relação às possibilidades que neste momento se colocam em Portugal para a utilização e aplicação de sistemas de ajustamento pelo risco, verifica-se que é praticamente impossível a curto prazo aplicar modelos com base em dados clínicos. Esta opção não deve impedir que a médio prazo se altere o sistema de informação dos hospitais, de forma a considerar a eventualidade de se utilizarem estes modelos. Existem diversos problemas quando se pretendem aplicar sistemas de ajustamento de risco a populações diferentes ou a subgrupos distintos das populações donde o sistema foi originalmente construído, existindo a necessidade de verificar o ajustamento do modelo à população em questão, em função da sua calibração e discriminação.

Avaliação do desempenho de fundos de investimento de obrigações: evidência para o mercado Brasileiro

Dissertação de mestrado em Finanças

Numerical Assessment of the out-of-plane response of a brick masonry structure without box behaviour

This paper presents the assessment of the out-of-plane response due to seismic loading of a masonry structure without rigid diaphragm. This structure corresponds to real scale brick masonry specimen with a main façade connected to two return walls. Two modelling approaches were defined for this evaluation. The first one consisted on macro modelling, whereas the second one on simplified micro modelling. As a first step of this study, static nonlinear analyses were conducted to the macro model aiming at evaluating the out-of-plane response and failure mechanism of the masonry structure. A sensibility analyses was performed in order to assess the mesh size and material model dependency. In addition, the macro models were subjected to dynamic nonlinear analyses with time integration in order to assess the collapse mechanism. Finally, these analyses were also applied to a simplified micro model of the masonry structure. Furthermore, these results were compared to experimental response from shaking table tests. It was observed that these numerical techniques simulate correctly the in-plane behaviour of masonry structures. However, the

Structure-property relationships in polymer nanocomposites

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos

Abundance of two Dendrocincla woodcreepers (aves: Dendrocolaptidae) in relation to forest structure in Central Amazonia

Few studies have been conducted to verify how the structure of the forest affects the occurence and abundance of neotropical birds. Our research was undertaken between January 2002 and July 2004 at the Reserva Ducke, near Manaus (02º55',03º01'S; 59º53',59º59'W) in central Amazonia, to verify how the forest structure affects the occurrence and abundance of two bird species: the Plain-brown Woodcreeper Dendrocincla fuliginosa and the White-chinned Woodcreeper Dendrocincla merula. Bird species occurrence was recorded using lines of 20 mist-nets (one sample unit), along 51 1-km transects distributed along 9 pararel 8 km trails covering an area of 6400 ha. Along these transects, we placed 50 x 50m plots where we recorded forest structure components (tree abundance, canopy openness, leaf litter, standing dead trees, logs, proximity to streams, and altitude). We then related these variables to bird occurence and abundance using multiple logistic and multiple linear regression models, respectively. We found that D. fuliginosa frequently used plateau areas; being more abundant in areas with more trees. On the other hand, D. merula occurred more frequently and was more abundant in areas with low tree abundance. Our results suggest that although both species overlap in the reserve (both were recorded in at least 68% of the sampled sites), they differ in the way they use the forest microhabitats. Therefore, local variation in the forest structure may contribute to the coexistence of congeneric species and may help to maintain local alpha diversity.

Structural analysis of the timber structure of Ica Cathedral, Peru

Dissertação de mestrado em Structural Analysis of Monuments and Historical Constructions

Exploring the role of O-Mannosylation in the modulation of E-Cadherin function in Gastric Cancer cell line models

Dissertação de mestrado em Bioquímica Aplicada – Biomedicina

Singularities of the dynamical structure factors of the spin-1/2 XXX chain at finite magnetic field

We study the longitudinal and transverse spin dynamical structure factors of the spin-1/2 XXX chain at finite magnetic field h, focusing in particular on the singularities at excitation energies in the vicinity of the lower thresholds. While the static properties of the model can be studied within a Fermi-liquid like description in terms of pseudoparticles, our derivation of the dynamical properties relies on the introduction of a form of the ‘pseudofermion dynamical theory’ (PDT) of the 1D Hubbard model suitably modified for the spin-only XXX chain and other models with two pseudoparticle Fermi points. Specifically, we derive the exact momentum and spin-density dependences of the exponents ζτ(k) controlling the singularities for both the longitudinal  and transverse (τ = t) dynamical structure factors for the whole momentum range  , in the thermodynamic limit. This requires the numerical solution of the integral equations that define the phase shifts in these exponents expressions. We discuss the relation to neutron scattering and suggest new experiments on spin-chain compounds using a carefully oriented crystal to test our predictions.

Measurement of the correlation between flow harmonics of different order in lead-lead collisions at root S-NN=2.76 TeV with the ATLAS detector

Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using sNN−−−−√=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated lumonisity of 7 μb−1. The vm-vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities ϵ2 and ϵ3. On the other hand, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm-vn correlations for n=4 and 5 are found to disagree with ϵm-ϵn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations.

Longitudinal evaluation, acceptability and long-term retention of knowledge on a horizontally integrated organic and functional systems course

Undergraduate medical education is moving from traditional disciplinary basic science courses into more integrated curricula. Integration models based on organ systems originated in the 1950s, but few longitudinal studies have evaluated their effectiveness. This article outlines the development and implementation of the Organic and Functional Systems (OFS) courses at the University of Minho in Portugal, using evidence collected over 10 years. It describes the organization of content, student academic performance and acceptability of the courses, the evaluation of preparedness for future courses and the retention of knowledge on basic sciences. Students consistently rated the OFS courses highly. Physician tutors in subsequent clinical attachments considered that students were appropriately prepared. Performance in the International Foundations of Medicine examination of a self-selected sample of students revealed similar performances in basic science items after the last OFS course and 4 years later, at the moment of graduation. In conclusion, the organizational and pedagogical approaches of the OFS courses achieve high acceptability by students and result in positive outcomes in terms of preparedness for subsequent training and long-term retention of basic science knowledge.

Poly(ester-urethane) scaffolds: effect of structure on properties and osteogenic activity of stem cells

The present study aimed to investigate the effect of structure (design and porosity) on the matrix stiffness and osteogenic activity of stem cells cultured on poly(ester-urethane) (PEU) scaffolds. Different three-dimensional (3D) forms of scaffold were prepared from lysine-based PEU using traditional salt-leaching and advanced bioplotting techniques. The resulting scaffolds were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), mercury porosimetry and mechanical testing. The scaffolds had various pore sizes with different designs, and all were thermally stable up to 300â °C. In vitrotests, carried out using rat bone marrow stem cells (BMSCs) for bone tissue engineering, demonstrated better viability and higher cell proliferation on bioplotted scaffolds compared to salt-leached ones, most probably due to their larger and interconnected pores and stiffer nature, as shown by higher compressive moduli, which were measured by compression testing. Similarly, SEM, von Kossa staining and EDX analyses indicated higher amounts of calcium deposition on bioplotted scaffolds during cell culture. It was concluded that the design with larger interconnected porosity and stiffness has an effect on the osteogenic activity of the stem cells.

Exploring the factor structure of neurocognitive measures in older individuals

Here we focus on factor analysis from a best practices point of view, by investigating the factor structure of neuropsychological tests and using the results obtained to illustrate on choosing a reasonable solution. The sample (n=1051 individuals) was randomly divided into two groups: one for exploratory factor analysis (EFA) and principal component analysis (PCA), to investigate the number of factors underlying the neurocognitive variables; the second to test the "best fit" model via confirmatory factor analysis (CFA). For the exploratory step, three extraction (maximum likelihood, principal axis factoring and principal components) and two rotation (orthogonal and oblique) methods were used. The analysis methodology allowed exploring how different cognitive/psychological tests correlated/discriminated between dimensions, indicating that to capture latent structures in similar sample sizes and measures, with approximately normal data distribution, reflective models with oblimin rotation might prove the most adequate.