IT Financial Management In a Large Industrial Company

IT Service Management plays a key role in many IT organizations today. First IT Service Management principles founded in the early 1980s but the real adaption emerged in the end 2000s. IT Financial Management is one of IT Service Management’s processes. The main purpose of this thesis was study how IT Financial Management approach can be improved in a case company. Budgeting, accounting and charging are IT Financial Management functions. These functions are researched in this thesis. Thesis materials consist of both qualitative and quantitative material. The theoretical part consists mostly of IT Service Management literature while interviews and the case company’s information systems are researched in the empirical part. Thesis also reviews different kind of the systems which supports and automates IT Financial Management functions. The biggest challenge is the cost allocation with the current ERP system in the case company. It is worth to take group based system for allocation in use before there is a holistic system in a market. The case company should also develop its IT service processes forward.

Industrial solid waste (whitewash mud) use in forest road pavements

The objective of the present study was to evaluate the effects of industrial solid waste (whitewash mud) on geotechnical properties considering the following engineering parameters: California Bearing Ratio (CBR), Atterberg limits and Permeability test. Seven soil samples derived from Alagoinhas, Bahia - Brazil, were classified by the Transportation Research Board (TRB) system. Two were selected as having a great geotecnical potential classified as A-3 (0) and A-2-4 (0), whitewash mud contents 10%, 15%, 20% and 25% dry weight and medium compaction effort were studied in the laboratory testing program. The results indicated the soil denominated good gravel as being the most promising one, when stabilized with whitewash mud, reaching the best results with the dosage of 20 and 25% of whitewash mud.

Uso do resíduo industrial grits em pavimentos de estradas florestais: influência do período de cura na resistência mecânica e expansão de misturas solo-grits compactadas

Analisou-se a influência do teor de estabilizante, da energia de compactação e do período de cura na resistência mecânica e expansão de dois solos da Zona da Mata Norte de Minas Gerais. As amostras de solos residuais de gnaisse coletadas na cidade de Viçosa, MG, Brasil, respectivamente, de texturas argilo-areno-siltosa e areno-argilo-siltosa, foram denominadas solos 1 e 2. Empregou-se como estabilizante químico o resíduo "grits" fornecido pela empresa de Celulose Nipo Brasileira (CENIBRA); os teores, em massa, de 4, 8, 12, 16, 20, 24 e 28% desse resíduo foram utilizados nas misturas solo-"grits". Corpos-de-prova das misturas solo-"grits" foram compactados nos teores ótimos de umidade relativos às energias de compactação dos ensaios Proctor intermediário e modificado e curados por 0, 7, 28 e 90 dias. Avaliou-se a resistência mecânica dos solos e misturas através dos seguintes parâmetros: (a) índice de suporte Califórnia (ISC ou CBR), resistência à compressão não confinada (RCNC) e resistência à tração em compressão diametral (Rt). Os resultados permitiram concluir que todos os parâmetros considerados na análise influenciaram, significativamente, a resistência mecânica das misturas solo-"grits", sendo o comportamento das misturas solo 1-"grits" influenciado, também, pelo teor de sódio presente na constituição química do "grits".

Avaliação econômica e financeira de projetos de fornos dos tipos container industrial e retangular de 40 estéreos

Este trabalho teve como objetivo principal a análise econômica e financeira de um projeto com 100 fornos tipo container industrial e 100 fornos tipo retangular de 40st. para a produção de carvão vegetal. Para tanto, utilizaram-se como indicadores financeiros a lucratividade, rentabilidade, prazo de retorno do investimento e ponto de equilíbrio. Os indicadores econômicos utilizados para proceder a análise econômica foram o VPL, TIR, B(C)PE e B/C. Concluíram que os fornos são viáveis do ponto de vista econômico e financeiro. Entretanto o forno container por ter maior VPL daria um retorno mais lucrativo quando comparado ao retangular de 40 st.

Algorithmic Solutions for Combinatorial Problems in Resource Management of Manufacturing Environments

This thesis studies the use of heuristic algorithms in a number of combinatorial problems that occur in various resource constrained environments. Such problems occur, for example, in manufacturing, where a restricted number of resources (tools, machines, feeder slots) are needed to perform some operations. Many of these problems turn out to be computationally intractable, and heuristic algorithms are used to provide efficient, yet sub-optimal solutions. The main goal of the present study is to build upon existing methods to create new heuristics that provide improved solutions for some of these problems. All of these problems occur in practice, and one of the motivations of our study was the request for improvements from industrial sources. We approach three different resource constrained problems. The first is the tool switching and loading problem, and occurs especially in the assembly of printed circuit boards. This problem has to be solved when an efficient, yet small primary storage is used to access resources (tools) from a less efficient (but unlimited) secondary storage area. We study various forms of the problem and provide improved heuristics for its solution. Second, the nozzle assignment problem is concerned with selecting a suitable set of vacuum nozzles for the arms of a robotic assembly machine. It turns out that this is a specialized formulation of the MINMAX resource allocation formulation of the apportionment problem and it can be solved efficiently and optimally. We construct an exact algorithm specialized for the nozzle selection and provide a proof of its optimality. Third, the problem of feeder assignment and component tape construction occurs when electronic components are inserted and certain component types cause tape movement delays that can significantly impact the efficiency of printed circuit board assembly. Here, careful selection of component slots in the feeder improves the tape movement speed. We provide a formal proof that this problem is of the same complexity as the turnpike problem (a well studied geometric optimization problem), and provide a heuristic algorithm for this problem.

Estudo das relações dos atores sociais no complexo industrial florestal de Minas Gerais

O objetivo deste estudo foi conhecer as interações entre os diferentes atores sociais relacionados às empresas do complexo industrial florestal de Minas Gerais. Tendo em vista tratar os dados obtidos, utilizou-se a adaptação da escala Likert como mecanismo de medida, tornando possível aferir o grau de concordância e importância atribuídas pelos entrevistados diante das afirmativas descritas no questionário aplicado. A relação com o governo, sociedade, clientes, fornecedores e concorrentes é considerada importante, sendo a busca por informações prática generalizada. A carga tributária, a má qualidade da rede viária e o apoio insuficiente destacaram-se como obstáculos ao desenvolvimento da atividade produtiva.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Measuring Cost of Poor Quality in Industrial Electronics

Quality is not only free but it can be a profit maker. Every dollar that is not spent on doing things wrong becomes a dollar right on the bottom line. The main objective of this thesis is to give an answer on how cost of poor quality can be measured theoretically correctly. Different calculation methods for cost of poor quality are presented and discussed in order to give comprehensive picture about measurement process. The second objective is to utilize the knowledge from the literature review and to apply it when creating a method for measuring cost of poor quality in supplier performance rating. Literature review indicates that P-A-F model together with ABC methodology provides a mean for quality cost calculations. These models give an answer what should be measured and how this measurement should be carried out. However, when product or service quality costs are incurred when quality character derivates from target value, then QLF seems to be most appropriate methodology for quality cost calculation. These methodologies were applied when creating a quality cost calculation method for supplier performance ratings.

Variáveis biométricas da cana-de-açúcar fertilizada com resíduos orgânico e industrial e irrigada com água servida e potável

O uso agrícola de resíduos orgânicos e industriais é uma alternativa de aproveitamento como fertilizante e fonte de matéria orgânica ao solo. Neste sentido, o objetivo deste trabalho foi avaliar o uso do composto de lixo e biofertilizante como fonte de nutrientes, e o resíduo do processamento da bauxita como corretivo da acidez do solo, para a cultura da cana-de-açúcar (cana-planta), irrigada com água potável e servida. Para tanto foi conduzido experimento em vaso, utilizando-se de solo Argissolo Vermelho-Amarelo distrófico, cultivado com a variedade RB855536. Foram avaliadas variáveis biométricas da planta, tais como: altura de plantas, diâmetro do colmo, perfilhamento, número de folhas, matéria seca de raiz e parte aérea. Os dados obtidos evidenciaram que a qualidade da água de irrigação, potável ou servida, não influenciou as variáveis avaliadas. A aplicação de composto de lixo e de biofertilizante constituiu-se numa fonte eficiente de nutrientes para as plantas de cana-de-açúcar, mas é necessária a aplicação adicional de fertilizantes para a obtenção de produção de colmos, similar ao do tratamento com adubação mineral convencional. Já o resíduo do processamento da bauxita mostrou-se eficiente na correção da acidez, apresentando as variáveis físicas semelhantes ao tratamento com adubação mineral, com exceção da matéria seca de raiz.

Weather variables, water balance, growth, and agro industrial yield of sugarcane

The objective of this study was to evaluate the meteorological variables, water deficiency, growth, and agro-industrial yield of sugarcane varieties: RB72454, RB863129, RB867515, RB92579, RB93509, RB931003, RB951541, and RB971755, in rainfed crop in two harvests in the Rio Largo-AL region. The meteorological variables were obtained in an automatic station and water balance was done by Thornthwaite & Mather method. During the study period, the air temperature ranged from 16.6 to 35.9 ºC. In the first production cycle rained 1,806 mm and the crop evapotranspiration was 1,775 mm. In the second cycle, the rainfall totaled 1,632 mm and the crop evapotranspiration was 1,290 mm. The average water excess of two production cycles was 689 mm and the water deficit totaled 665 mm. The average agricultural productivity in the plant was 86.8 t ha-1, in the first ratoon was 75.2 t ha-1 and the agro-industrial yield average was 12.9 and 10.9 tons of sugar per hectare in the plant and first ratoon, respectively. The air temperature was not limiting to the growth of sugarcane and the rainfall was higher than the crop evapotranspiration, but due to poor distribution of the rains there was water deficit. The most productive varieties were RB93509, RB92579, and RB863129.

Força requerida para o desprendimento de frutos de tomate industrial em diferentes estádios de maturação

A colheita do tomate destinado ao processamento, atualmente, é feita com colhedoras automotrizes; para isso, são necessários estudos que viabilizem a melhoria destas colhedoras, reduzindo assim perdas no campo. Este trabalho teve como objetivo quantificar a força necessária para o desprendimento do fruto de tomate de seu pedúnculo em diferentes estágios de maturação. O experimento foi realizado na Fazenda Madeira, no Município de Gameleira de Goiás-GO, e no Laboratório de Engenharia Agrícola da Universidade Estadual de Goiás. Nas condições de campo, os frutos foram retirados avaliando-se a força de tração no sentido axial do pedúnculo ao fruto e, em laboratório, nos sentidos axial e transversal. O trabalho foi realizado no delineamento experimental inteiramente casualizado, com fator único, com dez repetições. Os tratamentos foram os estádios de maturação, considerando tomates verdes, tomates pintados e tomates maduros. Os resultados foram submetidos à análise de variância, aplicando-se o teste de F e, quando significativo, o teste de Tukey, a 5% de probabilidade. A força axial média requerida para os desprendimentos foi de 14,69 N, com maior valor para os frutos maduros. Para o esforço transversal, os valores médios foram 0,98; 1,37 e 1,86 N para os frutos verdes, pintados e maduros, respectivamente.

Trauma abdominal penetrante consecutivo à corrente elétrica industrial

The authors present a case report of a victim of high power electric shock. The main electric lesion was a penetrating abdominal wound with loss of substance of the abdominal wall and an electric lesion of the hepatic segment and of the gallbladder. The surgical treatment included hepatic segmentectomy, cholecystectomy, repair of the abdominal wall with Marlex prosthesis and skin graft, besides the debridment of the lesions of extremities. The postoperative evolution was satisfactory and the follow-up for 6 months didn't show any sequelae.

Self-Assessment Report for International Accreditation – Bachelor’s and Master’s degree programmes in Industrial Management

Self-assessment report for accreditation of the Bachelor's and Master's degree programs in Industrial Management.

Post-industrial 2.0 – Social Web as the second coming of the post-industrial society

This study presents a review of theories of the so-called post-industrial society, and proposes that the concept of post-industrial society can be used to understand the recent developments of the World Wide Web, often described as Web 2.0 or social Web. The study combines theories ranging from post-war management science and cultural studies to software development, and tries to build a holistic view of the development of the post-industrial society, and especially the Internet. The discourse on the emergence of a post-industrial society after the World Wars has addressed the ways in which the growing importance of information, and innovations in digital communications technology, are changing our society. It is furthermore deeply connected with the discourse on the postmodern society, which emphasizes cultural fragmentation, intertextuality, and pluralism. The Internet age is characterized by increasing masses of information that are managed through various technologies. While 1990s Internet technologies often used the network as a traditional broadcasting channel with added interactivity, Web 2.0 technologies are specifically designed to utilize the network model by facilitating communication between various services and devices, and analyzing the relationships between users and objects in order to produce intelligent insight. The wide adoption of the Internet, and recently of Internet-enabled mobile devices, is furthermore continuously producing new ways of communicating, consuming, and producing. Applications of the social Web, such as social media or social networking services, are permanently changing our traditional social, cultural, and economic practices. The study first presents an overview of the post-industrial society, the Internet, and the concept of Web 2.0. Then the concept of social Web is described with an analysis of the term social media, the brief histories of the interactive Web and social networking services, and a description of the concept ―long tail‖, used to represent the masses of information available in the Web that do not receive mainstream attention. Finally, methods for retrieving and filtering information, modeling social and cultural relationships, and communicating with customers, are presented.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.