955 resultados para merged beams
Resumo:
Tämän tutkimuksen tarkoituksena oli tarkastella osuuskauppafuusioiden käytännön toteutusta kulttuurimuutoksen ja organisaatiomuutoksen näkökulmasta, sekä kuvata myös fuusion herättämiä tuntemuksia. Tutkimukseen osallistui kaksi case-osuuskauppaa, Osuuskauppa Varuboden-Osla Handelslag sekä Suur-Seudun Osuuskauppa. Tutkimuksen näkökulma keskittyy osuuskaupan johdon sekä yksiköiden esimiesten näkemyksiin fuusion kulusta. Tutkimus on laadullinen, ja sen aineistonhankinta toteutettiin teemahaastattelun ja kyselyn avulla. Tutkimusta varten haastateltiin molempien case-osuuskauppojen fuusion aikaista johtoa, yhteensä 12 henkilöä, sekä fuusiossa mukana toiminutta konsulttia. Fuusion aikaan yksikön esimiehinä työskennelleille henkilöille puolestaan toteutettiin lomakekysely verkkokyselynä. Vastauksia verkkokyselyyn saatiin yhteensä 21 henkilöltä vastausprosentin ollessa 23,9. Tutkimustulokset osoittavat, että kulttuurimuutos jää fuusiossa helposti organisaatiomuutoksen jalkoihin. Kun kulttuurin olemassaoloa ei nähdä, keskitytään liittämään kaksi osuuskauppaa organisatorisesti ja toimintatavoiltaan yhteen. Toisessa case-osuuskaupassa saatiin hyviä tuloksia aloittamalla organisaatiomuutoksen rinnalla kulttuurimuutoshanke jo fuusion suunnitteluvaiheessa. Organisaatiomuutoksessa oleellista on tasapuolisuus kombinaatiofuusion toteuttavien osuuskauppojen kesken sekä johdon ja esimiesten osallistaminen muutosprosessiin. Kulttuurin lisäksi erityisesti johto-organisaation tapa organisoitua sekä viestinnän onnistuminen vaikuttavat paljon fuusion aikaisten positiivisten tuntemuksien määrään.
Resumo:
Tämän pro gradu -tutkimuksen tavoitteena oli tutkia osaamisen johtamisen käytäntöjä ja kehittämistarpeita kohdeorganisaatiossa henkilöstön näkökulmasta. Tutkimuksen tarkoituksena oli selvittää, miten tehtyjä henkilöstötutkimuksia on hyödynnetty kohdeorganisaatiossa ja näkyykö tämä hyödyntäminen käytännön johtamisessa henkilöstön mielestä. Tutkimus suoritettiin laadullisena tapaustutkimuksena ja empiirinen aineisto kerättiin kuudella teemahaastattelulla, jotka analysoitiin sisällönanalyysimenetelmällä. Tutkimuksessa kartoitettiin, millaisia osaamisen johtamisen käytäntöjä kohdeorganisaatiossa on. Tutkimuksen tuloksien perusteella osaamisen johtamisen peruselementit ovat olemassa: säännölliset palaverit koettiin tärkeiksi, mutta koulutuksien ja kehityskeskusteluiden järjestämisessä sekä jälkiseurannassa henkilöstö näki parannettavaa. Myös hiljaisen tiedon siirtäminen ja hyödyntäminen koettiin merkittäväksi tekijäksi organisaation onnistuneen toiminnan ja jatkuvuuden kannalta. Tutkimuksessa todettiin osaamisen johtamisen kehittämisen ja osaamisen kehittämisen menetelmien linkittyvän vahvasti toisiinsa ja tutkimuksen tuloksena esitettiin konkreettisia toimenpide-ehdotuksia osaamisen johtamisen kehittämisestä kohdeorganisaation johdolle. Tutkimuksen mukaan osaamisen johtaminen ja henkilöstöjohtaminen sulautuvat toisiinsa, eikä niitä voida tarkastella erikseen. Johdon ja henkilöstön välisellä vuorovaikutuksella on suuri merkitys onnistuneelle osaamisen johtamiselle. Keskeistä on kytkeä osaamisen johtaminen organisaation käytäntöihin ja varata sen implementointiin riittävästi resursseja.
Resumo:
Kylmälaitekoneikot ovat kylmäkomponentteja sisältäviä rakenteita, joiden avulla toteutetaan suurten tilojen, kuten elintarvikemyymälöiden sisäilman jäähdytys. Lisäksi koneikkojen avulla jäähdytetään matalampiin lämpötiloihin pienempiä kylmähuoneita. Osa koneikoista ottaa talteen kylmäprosessissa syntyvän lämmön, jota hyödynnetään tilojen lämmityksessä. Tämän diplomityön tavoitteena oli suunnitella ja mitoittaa kahdeksalle eri kylmälaitekoneikolle entistä kustannustehokkaammat runkorakenteet, jotka ovat niin kestäviä, että koneikkoja on mahdollista pinota tilan säästämiseksi kolme päällekkäin. Lisäksi runkorakenteilta vaadittiin helppoa kuljetettavuutta, hyviä kiinnitysominaisuuksia ja korroosionkestävyyttä. Aluksi työssä selvitettiin runkorakenteisiin kohdistuvat vaatimukset, jonka jälkeen materiaalin valinta tehtiin materiaaliin kohdistuvien vaatimusten perusteella. Rakenteiden palkit mitoitettiin tarvittavan taivutusvastuksen ja kiepahduksen mukaan. Pilarit puolestaan mitoitettiin nurjahduksen ja kaksiaksiaalisen taivutustilan perusteella. Tämän jälkeen mitoitettiin eri sauvojen väliset hitsi- ja ruuviliitokset siten, että rakenne hajoaa ylikuormitustilanteessa mahdollisimman turvallisesti. Työssä tehdyt laskelmat varmennettiin elementtimenetelmän avulla ja lopullisille rakenteille tehtiin elementtimenetelmällä vielä ominaistaajuusanalyysejä. Lopuksi työssä suunniteltiin runkorakenteille sopiva korroosionsuojaus.
Resumo:
Successful management of rivers requires an understanding of the fluvial processes that govern them. This, in turn cannot be achieved without a means of quantifying their geomorphology and hydrology and the spatio-temporal interactions between them, that is, their hydromorphology. For a long time, it has been laborious and time-consuming to measure river topography, especially in the submerged part of the channel. The measurement of the flow field has been challenging as well, and hence, such measurements have long been sparse in natural environments. Technological advancements in the field of remote sensing in the recent years have opened up new possibilities for capturing synoptic information on river environments. This thesis presents new developments in fluvial remote sensing of both topography and water flow. A set of close-range remote sensing methods is employed to eventually construct a high-resolution unified empirical hydromorphological model, that is, river channel and floodplain topography and three-dimensional areal flow field. Empirical as well as hydraulic theory-based optical remote sensing methods are tested and evaluated using normal colour aerial photographs and sonar calibration and reference measurements on a rocky-bed sub-Arctic river. The empirical optical bathymetry model is developed further by the introduction of a deep-water radiance parameter estimation algorithm that extends the field of application of the model to shallow streams. The effect of this parameter on the model is also assessed in a study of a sandy-bed sub-Arctic river using close-range high-resolution aerial photography, presenting one of the first examples of fluvial bathymetry modelling from unmanned aerial vehicles (UAV). Further close-range remote sensing methods are added to complete the topography integrating the river bed with the floodplain to create a seamless high-resolution topography. Boat- cart- and backpack-based mobile laser scanning (MLS) are used to measure the topography of the dry part of the channel at a high resolution and accuracy. Multitemporal MLS is evaluated along with UAV-based photogrammetry against terrestrial laser scanning reference data and merged with UAV-based bathymetry to create a two-year series of seamless digital terrain models. These allow the evaluation of the methodology for conducting high-resolution change analysis of the entire channel. The remote sensing based model of hydromorphology is completed by a new methodology for mapping the flow field in 3D. An acoustic Doppler current profiler (ADCP) is deployed on a remote-controlled boat with a survey-grade global navigation satellite system (GNSS) receiver, allowing the positioning of the areally sampled 3D flow vectors in 3D space as a point cloud and its interpolation into a 3D matrix allows a quantitative volumetric flow analysis. Multitemporal areal 3D flow field data show the evolution of the flow field during a snow-melt flood event. The combination of the underwater and dry topography with the flow field yields a compete model of river hydromorphology at the reach scale.
Resumo:
Keskustelu yrittäjyyden sijoittumisesta yliopistojen tehtäväkenttään on muodostunut 2000-luvun aikana osaksi yhteiskunnallista ja maailmanlaajuista korkeakoulutuksen muutosta. Tämän tutkimuksen tarkoituksena on lisätä ymmärrystä yliopiston yrittäjämäisyyden sosiaalisesta rakentumisesta. Lähestyn yliopiston sisällä tuotettua moniäänistä yrittäjyyspuhetta yliopiston yrittäjämäisyyden todellisuuden representaationa, ja pyrin tekemään siitä selkoa kommunikaatioon kohdistuvan analyysin avulla. Ilmiön empiirinen tarkastelu pohjautuu Aalto-yliopistossa ja sitä edeltäneessä Teknillisessä korkeakoulussa vuosina 2006–2013 kerättyihin tekstiaineistoihin. Aineistojen tulkinta tuottaa monikerroksellista tietoa ilmiöstä niin yksilö- kuin organisaatiotasolla. Tarkastelen tutkimuksessani millaisia merkityksenantoja yrittäjyydelle ja yrittäjämäisyydelle annetaan yliopiston sisällä eri näkökulmista katsottuna, kun yliopisto käy läpi merkittävää organisaatiorakenteellista ja institutionaalista muutosta. Tutkimusasetelman neljä näkökulmaa perustuvat tekniikan alan jatko-opiskelijoiden puheeseen, TKK:n opetussuunnitelmatekstiin, Aalto-yliopiston opettajien puheeseen ja johdon tuottamaan strategiatekstiaineistoon. Tutkimuksen tulosten mukaan käynnissä on ollut akateemisten arvojen ja arvojärjestelmien laajentumisen aika ja tila, jossa yrittäjämäisyys astuu areenalle, mutta sen suppeat tulkinnat eivät tarjoa mahdollisuuksia ruohonjuuritason kiinnittymiseen akateemisesta kulttuurista käsin. Yrittäjyyden ja yrittäjämäisyyden saamat taloudelliskaupalliset merkitykset koetaan uhkaksi, eikä tilannetta helpota yleisesti uuvuttavaksi koettu rakenteellinen ja yhteiskunnallinen yliopiston muutosvaihe. Hallitsevat tarinalinjat kuten puhe kilpailukyvystä ja kilpailutilanteen kovenemisesta tuottavat odotusten viitekehyksen, joilla yliopiston toimintaa raamitetaan ulkoapäin. Yrittäjyyteen laajassa merkityksessä sisältyvät mahdollisuudet jäävät niin ikään hyödyntämättä, ja lukuisat edistämistoiminnot kilpistyvät sosiaalisesti rakentuviin esteisiin. Tässä tutkimuksessa rakentuva laajennettu yliopiston yrittäjämäisyyden viitekehys pyrkii palvelemaan moniäänistymisen tarkoitusta käsitteellisellä tasolla ja avaamaan uusia mahdollisuuksia yliopiston yrittäjämäisyyden edistämiselle.
Resumo:
In this thesis was performed comprehensive study about the convenience of scallops in plate structures. A literature review was performed and lack of knowledge was fulfilled with fatigue tests performed in the laboratory of Steel Structures at the Lappeenranta University of Technology and with finite element method. The aim of this thesis was to produce design guidance for the use of scallops for different structural details and different loading conditions. An additional aim was to include more precise instructions for scallop design to produce good fatigue resistance and appropriate manufacturing quality. The literature review was performed searching bridge engineering and maritime standards and design guides and studies from scientific databases and reference lists from the literature of this field. Fatigue tests were used to research the effect of using scallops or not using scallops to fatigue strength of bracket specimen. Tests were performed on three specimens with different scallop radii and to five specimens without scallops with different weld penetration depths. Finite element method using solid elements, symmetry and submodels was used to determine stress concentration factors for I-beams with scallops. Stresses were defined with hot spot stress method. Choosing to use a scallop or not in the structure is affected by many factors, such as structural and loading conditions and manufacturability. As a rule of thumb, scallops should be avoided because those cause stress concentration points to the structure and take a lot of time to manufacture. When scallops are not used, good quality welding should be provided and full weld penetration is recommended to be used in load carrying corner weld areas. In some cases, it is advisable to use scallops. In that case, circular scallops are recommended to be used and radius should be chosen from fatigue strength or manufacturing point of view.
Resumo:
Robottiikkatuoteperheeseen kuuluu robottihitsausportaalit, joiden päärunko rakentuu kote-lopalkeista. Koteloprofiilien käyttö on suosittua teollisuuden eri aloilla ja se soveltuu hyvin raskaaseen konepajateollisuuteen. Hitsausrobottiportaalin suunnitteluun liittyy monia eri vaiheita ja valituilla teknisillä ratkaisuilla voidaan vaikuttaa valmistettavan tuotteen hitsin laatuun ja työn onnistumiseen. Hitsausrobottiportaalit ovat usein asiakasräätälöityjä ratkaisuja, jolloin suunnittelutyö sekä valmistusvaihe vaativat runsaasti kapasiteettia. Modulaarisuuden avulla suunnittelu- ja valmistusvaiheita on mahdollista nopeuttaa sekä parantaa tuotteen testausta, huollettavuutta ja laatua. Tässä diplomityössä tutkittiin, miten hitsausrobottiportaalin vaakapuomi käyttäytyy ja taipuu erilaisissa kuormitustilanteissa. Lisäksi työssä määritettiin alkuperäisen koteloprofiilin tilalle uusi optimoitu koteloprofiili sekä tarkasteltiin moduloinnin mahdollistamista robo-tiikkatuoteperheen portaalisovelluksiin.
Resumo:
This work includes two major parts. The first part of the work concentrated on the studies of the application of the highperfonnance liquid chromatography-particle beam interface-mass spectrometry system of some pesticides. Factors that have effects on the detection sensitivity were studied. The linearity ranges and detection limits of ten pesticides are also given in this work. The second part of the work concentrated on the studies of the reduction phenomena of nitro compounds in the HPLC-PB-MS system. Direct probe mass spectrometry and gas chromatography-mass spectrometry techniques were also used in the work. Factors that have effects on the reduction of the nitro compounds were studied, and the possible explanation is proposed. The final part of this work included the studies of reduction behavior of some other compounds in the HPLC-PB-MS system, included in them are: quinones, sulfoxides, and sulfones.
Resumo:
Ontario Editorial Bureau (O.E.B.)
Resumo:
The origins of the Welland County Fair date back to the founding of the County of Welland in 1852. A provincial charter was issued in 1853 to create the Welland County Agricultural Society that was to operate the Fair. In 1970, the Welland County Fair became the Niagara Regional Exhibition, and the Society became known as the Niagara Regional Agriculture Society. The Society seeks to “encourage interest, promote improvements in and advance the standards of agriculture, domestic industry and rural life”. The Welland Festival of Arts was developed in 1986 in order to revitalize the town’s economy. An “outdoor art gallery” was created by painting murals on buildings that depicted the town’s heritage, a concept successfully adopted by the town of Chemainus, B.C. The first mural was completed in the summer of 1988, and by 1991 there were a total of 28 murals around the city. The endeavour proved successful: in the years that followed the creation of the Festival, two new hotels were constructed, a third was expanded, and there was an addition to the Seaway Mall to accommodate the increased tourist traffic. Optimist International is a non-profit organization that strives to “bring out the best in kids” . The first Canadian club was formed in Toronto in 1924. The Welland branch of the Optimist Club was founded in 1937. The first Welland County General Hospital opened in 1908. As the population increased, it became necessary to expand the existing facilities. Additions were made to the original structure with an East wing in 1930 and a children’s ward in 1931. However, in the 1950’s, the hospital was operating beyond optimum capacity and the need for a larger facility was clear. It was decided that a new hospital would be built, which opened in April 1960. The new hospital had 259 beds and 51 bassinets. Further additions were made in 1967 and 1978. The County of Welland was formed in 1850 when it was officially separated from Lincoln County, however, the two counties continued to operate together until 1856 when a new County building and jail for Welland County were completed. That same year, the first meeting of the Council of the Corporation of Welland County took place. The final meeting of the Council took place on December 18, 1969. The following year, the County of Welland merged with Lincoln County to form the Regional Municipality of Niagara. The Welland Mills in Thorold, Ont., was built in 1846-1847 by Jacob Keefer and is thought to have been one of the largest flour mills in Upper Canada. Ownership of the mill changed several times over the years and previous owners include the Howland family, the Hedley Shaw Milling Company and the Maple Leaf Milling Company. In 1986, the building received a heritage plaque from the Ontario Heritage Foundation, an agency of the Ontario Ministry of Culture and Recreation. At this time, the mill was no longer in operation and was being used for storage by Fraser, Inc. By 2006, the dilapidated building had been redeveloped into18 apartments and 2 floors of commercial space, while maintaining many heritage features. The building is currently known as the Welland Mills Centre.
Resumo:
Jacob Hindman (1789-1827) was an American military officer who was a captain of the Second U.S. Artillery during the War of 1812. He commanded troops at the battles at Fort George and Stony Creek in 1813, and in June of that year became the major of the Second Artillery. He remained in this position until May of 1814 when the regiment was merged with the Corps of Artillery. During the Niagara campaign in 1814, Hindman’s company commanders included Nathan Towson, Thomas Biddle, John Ritchie, and Alexander Williams. During the British attack on Fort Erie in August 1814, Hindman led an assault for which he later received a brevet promotion to lieutenant colonel for “gallant conduct in the defense of Fort Erie”. In 1815, he received an additional brevet for “meritorious services”. He is generally regarded as one of the most successful artillerists of the War of 1812. James Hall (1793-1868) served with the U.S. military as a second lieutenant in the Second Artillery during the War of 1812. He fought in the Battle of Lundy’s Lane and was General Brown’s messenger during the attack on Fort Erie. He left the military in 1818 and became a newspaper editor and author. His experiences during the War of 1812 provided material for two stories, The Bearer of Despatches and Empty Pockets. Much of his work sought to popularize the West and promote western authors.
Resumo:
This study examined the cultural health beliefs in diabetes education amongst the Aboriginal population within a city in Southern Ontario. The purpose was to contribute to the development of a culturally relevant diabetes handbook as well as to delivery styles within current diabetes education programs. To this end, a focus group was conducted with Aboriginal men and women between the ages of 18-70 years with type 2 diabetes. Participants were recruited from 2 Aboriginal community centres and an Aboriginal health centre in a city in Southern Ontario. Themes were drawn from the analysis of the focus group transcripts and combined with the findings from the research literature. The major themes that merged were drawn from Eurocentric and Aboriginal theories. The results were a set of recommendations on the type of format for diabetes educational programs such as traditional group activities, variety of electronic format, and culture specific educational resources. The emergent results appear to provide some important insights into program planning for diabetes education centres within Aboriginal communities.
Resumo:
The St. Catharines and District Labour Council was founded in May 1957 by unionized workers from St. Catharines, Thorold, Merritton, Port Dalhousie and Grimsby. They sought to improve the social and economic welfare of workers; promote the organization of workers into unions for their mutual benefit, regardless of race, creed, colour, or national origin; encourage the sale of union-made goods and services; promote worker education; provide workers with a voice in politics; and safeguard the democratic nature of the labour movement. The Council, affiliated with both the Canadian Labour Congress and the Ontario Federation of Labour, was instrumental in assisting local workers with their labour disputes, including Canadian Pulp and Paper workers at Abitibi Provincial Paper in Thorold [1975-76], and Gallaher Paper [1999], workers at the St. Catharines Eaton’s store [1985], as well as smaller disputes such as that between the part-time secretarial staff and the Welland County Roman Catholic Separate School Board [1972] and workers of the Skyway Lumber Company [1972]. The Council also assisted the community at large by offering a Community Counseling Service [1971-1976] to help citizens with issues concerning various government agencies, social services and Acts, such as the Vacation Pay Act, Landlord and Tenant Act, Employment Standards Act, unemployment insurance claims and workman’s compensation claims. Other projects that the Council organized included an annual Education Institute [1958-1965] and the annual publication of Labour Review, a summary of the Council’s past year. The Labour Council continued to operate until 2010, when several local Labour Councils merged to form the Niagara Regional Labour Council.
Resumo:
General Isaac Brock was a British Army officer and administrator who was promoted to Major General. He was responsible for defending Upper Canada against the United States. He died at the Battle of Queenston Heights during the War of 1812. Bartholome Houde and George E. Tuckett (Tuckett was mayor of Hamilton Ontario in 1896) manufactured and sold tobacco before Confederation. In 1841, the company was called B. Houde and Grothe. When Houde retired in 1822 his son in law, Francis Xavier Dussault took over the company. In 1903, the company was called B. Houde and Company Ltee. and it was run by Dussault’s two sons J.A. Dussault and J.E. Dussault. The B. Houde Company had become part of American Tobacco Ltd. which merged with Empire Tobacco Co. Ltd. to form the Imperial Tobacco Company in 1908 in the St. Henri district of Montreal. In 2008, the company celebrated their centennial. Cigarette silks were either enclosed in packets of cigarettes or were redeemable by mail. People would sew these silks together to create quilts or table covers. Some cigarette packages even included instructions for making these items.
Resumo:
The County of Lincoln dates back to 1798, when the first Lincoln County was formed. It was comprised of the townships of Clinton, Grimsby, Saltfleet, Barton, Ancaster, Glanford, Binbrook, Gainsborough, Caistor, Newark (Niagara), Grantham, Louth, Stamford, Thorold, Pelham, Bertie, Willoughby, Crowland, Humberstone and Wainfleet. The County boundaries were revised over the years, and the formation of Welland County in 1856 left only 7 townships in Lincoln County (Niagara, Grantham, Louth, Clinton, Gainsborough, Caistor and Grimsby). A County Council was also established at this time, which consisted of a Clerk, Warden, and a representative from each township. In 1862, the County Seat was moved from Niagara-on-the-Lake to St. Catharines. In 1970, Lincoln and Welland Counties were amalgamated to form the Regional Municipality of Niagara.