Análise espectral de reflectarrays com substratos de duas camadas dielétricas anisotrópicas uniaxiais

Recently, an amazing development has been observed in telecommunication systems. Two good examples of this development are observed in mobile communication and aerospace systems. This impressive development is related to the increasing need for receiving and transmitting communication signals. Particularly, this development has required the study of new antennas and filters. This work presents a fullwave analysis of reflectarrays. The considered structures are composed by arrays of rectangular conducting patches printed on multilayer dieletric substrates, that are mounted on a ground plane. The analysis is developed in the spectral domain, using an equivalent transmission line method in combination with Galerkin method. Results for the reflection coefficient of these structures are presented and compared to those available in the literature. A good agreement was observed. Particularly, the developed analysis uses the transmission lines theory in combination with the incident potentials and the field continuity equations, at the structures interfaces, for obtaining the scattered field components expressions as function of the patch surface currents and of the incident field. Galerkin method is used to determine the unknown coefficients in the boundary value problem. Curves for the reflection coefficient of several reflectarray geometries are presented as function of frequency and of the structural parameters

Obtenção dos parâmetros-x de estruturas planares

Due to major progress of communication system in the last decades, need for more precise characterization of used components. The S-parameters modeling has been used to characterization, simulation and test of communication system. However, limitation of S-parameters to model nonlinear system has created new modeling systems that include the nonlinear characteristics. The polyharmonic distortion modeling is a characterizationg technique for nonlinear systems that has been growing up due to praticity and similarity with S-parameters. This work presents analysis the polyharmonic distortion modeling, the test bench development for simulation of planar structure and planar structure characterization with X-parameters

Caracterização de circuitos planares de micro-ondas pelo método iterativo das ondas

The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.

Análise espectral de reflectarrays com substrato de duas camadas dielétricas anisotrópicas uniaxiais

Recently, an amazing development has been observed in telecommunication systems. Two good examples of this development are observed in mobile communication and aerospace systems. This impressive development is related to the increasing need for receiving and transmitting communication signals. Particularly, this development has required the study of new antennas and filters. This work presents a fullwave analysis of reflectarrays. The considered structures are composed by arrays of rectangular conducting patches printed on multilayer dieletric substrates, that are mounted on a ground plane. The analysis is developed in the spectral domain, using an equivalent transmission line method in combination with Galerkin method. Results for the reflection coefficient of these structures are presented and compared to those available in the literature. A good agreement was observed. Particularly, the developed analysis uses the transmission lines theory in combination with the incident potentials and the field continuity equations, at the structures interfaces, for obtaining the scattered field components expressions as function of the patch surface currents and of the incident field. Galerkin method is used to determine the unknown coefficients in the boundary value problem. Curves for the reflection coefficient of several reflectarray geometries are presented as function of frequency and of the structural parameters

Otimização topológica de estruturas termoelásticas tridimensionais

This work presents an optimization technique based on structural topology optimization methods, TOM, designed to solve problems of thermoelasticity 3D. The presented approach is based on the adjoint method of sensitivity analysis unified design and is intended to loosely coupled thermomechanical problems. The technique makes use of analytical expressions of sensitivities, enabling a reduction in the computational cost through the use of a coupled field adjoint equation, defined in terms the of temperature and displacement fields. The TOM used is based on the material aproach. Thus, to make the domain is composed of a continuous distribution of material, enabling the use of classical models in nonlinear programming optimization problem, the microstructure is considered as a porous medium and its constitutive equation is a function only of the homogenized relative density of the material. In this approach, the actual properties of materials with intermediate densities are penalized based on an artificial microstructure model based on the SIMP (Solid Isotropic Material with Penalty). To circumvent problems chessboard and reduce dependence on layout in relation to the final optimal initial mesh, caused by problems of numerical instability, restrictions on components of the gradient of relative densities were applied. The optimization problem is solved by applying the augmented Lagrangian method, the solution being obtained by applying the finite element method of Galerkin, the process of approximation using the finite element Tetra4. This element has the ability to interpolate both the relative density and the displacement components and temperature. As for the definition of the problem, the heat load is assumed in steady state, i.e., the effects of conduction and convection of heat does not vary with time. The mechanical load is assumed static and distributed

Método de Otimização Topológica em Estruturas Tridimensionais

The topology optimization problem characterize and determine the optimum distribution of material into the domain. In other words, after the definition of the boundary conditions in a pre-established domain, the problem is how to distribute the material to solve the minimization problem. The objective of this work is to propose a competitive formulation for optimum structural topologies determination in 3D problems and able to provide high-resolution layouts. The procedure combines the Galerkin Finite Elements Method with the optimization method, looking for the best material distribution along the fixed domain of project. The layout topology optimization method is based on the material approach, proposed by Bendsoe & Kikuchi (1988), and considers a homogenized constitutive equation that depends only on the relative density of the material. The finite element used for the approach is a four nodes tetrahedron with a selective integration scheme, which interpolate not only the components of the displacement field but also the relative density field. The proposed procedure consists in the solution of a sequence of layout optimization problems applied to compliance minimization problems and mass minimization problems under local stress constraint. The microstructure used in this procedure was the SIMP (Solid Isotropic Material with Penalty). The approach reduces considerably the computational cost, showing to be efficient and robust. The results provided a well defined structural layout, with a sharpness distribution of the material and a boundary condition definition. The layout quality was proporcional to the medium size of the element and a considerable reduction of the project variables was observed due to the tetrahedrycal element

Efeito da intensidade do vento, da pressão e de pontas de pulverização na deriva de aplicações de herbicidas em pré-emergência

Objetivou-se com este trabalho avaliar o efeito de pontas de pulverização, pressão e intensidade do vento na deriva gerada em aplicações simuladas de herbicidas aplicados em pré-emergência. Os modelos de pontas de pulverização e as respectivas pressões testadas foram: SF 11002 (207 e 310 kPa), JA-2 (345 e 655 kPa) e AVI 11002 (207 e 414 kPa). As aplicações foram realizadas em dois períodos, em dias com condições de velocidade de vento distintas, em uma área de 1.200 m², localizada na Fazenda Experimental da FCA/UNESP. Um pulverizador com barra de 12 m, 24 bicos e tanque de 600 L foi utilizado nas aplicações. A calda de aplicação foi composta por água e o corante alimentício FDC-1 foi usado como traçador. A deriva foi amostrada por coletores ativos fixados sobre a barra de pulverização. As velocidades mínimas, médias e máximas de vento registradas no primeiro e segundo períodos das aplicações foram de 7, 14 e 23 km h-1 e 1, 5 e 18 km h-1, respectivamente. Nas duas ocasiões de aplicação, as pontas de pulverização com indução de ar AVI 11002 e de jato cônico vazio JA-2 a 655 kPa resultaram nas menores e maiores quantidades de depósito de líquido detectadas, respectivamente. A maior intensidade do vento incrementou a deriva. A redução na pressão pode ser utilizada para controle de deriva, mas a seleção adequada de uma ponta mostrou ser mais eficiente para esse propósito.

Frequência de Lettuce big-vein associated virus e Mirafiori lettuce big-vein virus em Plantas de alface no Estado de São Paulo e transmissão através de extrato vegetal e solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transmissão do Cowpea mild mottle virus pela mosca branca Bemisia tabaci biótipo B para plantas de feijão e soja

A necrose da haste da soja é causada por um vírus do gênero Carlavirus transmitido pela mosca branca Bemisia tabaci, também infectante de feijão e identificado como Cowpea mild mottle virus (CpMMV). Neste trabalho foram realizados testes para determinação do número de moscas-brancas B. tabaci biótipo B necessários para transmissão do vírus em feijoeiro e soja. Na sequência foram realizados dois outros testes, com 10 insetos por planta. Avaliaram-se períodos de acesso à aquisição (PAA) de 'Jalo' para 'Jalo', e o efeito de períodos de acesso à inoculação (PAI). Foram visualmente constatados sintomas típicos do carlavírus como mosaico, clareamento de nervuras, necrose sistêmica e redução de crescimento. Houve transmissão do vírus para 'BT-2' de feijão e 'BRS-132' de soja com apenas um inseto por planta, sendo mais eficaz nesta última espécie. A taxa de transmissão do vírus foi maior com o aumento do número de insetos por planta. E o PAA foi determinado após 15' de tempo para aquisição, e o PAI com 5 min e aumentando os períodos de acesso a aquisição e inoculação aumentou-se a taxa de transmissão.

Simulações da ação do vento e da dispersão de contaminantes no estuário do Rio Potengi/ Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Resistência e performance na arte de João Cota

Researching about the art of tell and the tales told by João Cota is somehow revisiting the oral tradition and social practice in the story-telling art. It takes into consideration the resistance this art still exerts, mainly by using the performance of oral transmission and receptiveness to tales. The study of this practice contributes to the vivacious and dynamcis permanence of this authentic and traditional storyteller of his repertory and of his form to tellin our culture. Story-telling is part of the humankind living heritage communicated by means of popular wisdom. Despite the risk of vanishing into thin air, along with their narrators, the tales still manage to resist the contemporary mass culture model. How long further will stories like the ones narrated by João Cota be able to resist to strong and stronger structures dictated by writing and other communication means? João Cota s practice in story-telling will be studied not only as a proposal to identify the presence of this practice and the oral cultural resistance but also, through the performance prospective, to identify the oral transmission and receptiveness to the tales that are part of this storyteller s repertoire. In other words: what he tells, how he tells it, and why he tells it. The advent of new technologies such as internet, through which people can easily communicate with others in different parts of the world, and the greater and greater expansion in the writing skill concept interfere the maintenance of the oral tradition elements present in João Cota s narratives and inserted in the Brazilian culture. This has become more visible in the latest decades although we still notice the living tradition and permanence of the story-telling practice in several parts of the country through their wise storytellers. Our research target will require - in each of its study stages reference to works by several theoreticians namely Paul Zumthor, Mikhail Bakhtin, Câmara Cascudo, theoreticians from the receptiveness aesthetic, from the written culture history, from oral cultures and reading practices, from tradition and the Brazilian Culture of oral story-telling. In order to get to know and draw a profile of this storyteller, we ve chosen to use the comprehensive interview method by French Sociologist Jean Claude Kaufmann. The originality in the method consists of the qualitative data put together in situ , concentrated on the storyteller s narratives/speeches recorded on tape, which will be the focal point of this study. Our analysis method is based on tireless sessions of listening to interviews out of which we gathered information related to the storyteller, his practice in telling the tales, and his repertoire

A complexidade do ser fictício: a construção da personagem Marcela no romance A ostra e o vento

It is possible to notice that the modern narrative increasingly seeks to invest its characters with a broad and complex nature, away from the well-defined beings of the traditional narrative. Through this work, we aim to make a study of Marcela, a character of the novel A ostra e o vento, by Moacir Costa Lopes, taking into account the way the complexity of the fictitious being is constituted through an analysis of structural, semantic, and thematic elements. We first will bring up a brief theoretical discussion about the character in a novel, and we also will carefully analyze the diagetic universe, presenting the complex path of the character further. Subsequently, we will focus on the structure of the narrative which creates a complex picture of the character, using the technique of crossed points of view as well as the technique of temporal fragmentation. Finally, we will investigate conflicting social relations that portray Marcela s disturbed inner side, as well as the metaphoric symbolic language, which furnishes a number of different representation of this character, impeding the creation of a well-structured coherent character. Studies of scholars such as Antonio Candido, Anatol Rosenfeld, Vitor Manuel de Aguiar e Silva, Fernando Segolin, Gerard Genette, Michel Zéraffa, among others, will guide our analysis

Cinge a musa o oráculo da tradição: revelações perenes da narrativa em contos de Perrault

Le présent ouvrage comprend des versions comparatives de neuf contes de Perrault, parmi les plus célèbres, publiés dans des éditions intégrales, au Brésil, entre 1934 et 2005. L analyse comparative donne la priorité à l identification des éléments relatifs à l oralité, comme ceux qui appartiennent, selon Ong (1998) et Havelock (1996), à des contextes de cultures antérieures à l épanouissement de l écriture et qui donc élaboraient ses propres structures de pensée et d expression pour interagir dans la vie pratique comme dans la création, dans la transmission et la manutention des coutumes et traditions. Issus des premiers récits, les contes de Perrault, traduits ou adaptés au Brésil, gardent en eux l esprit du langage narratif auquel l auteur français a consagré une attention spéciale, pour transposer dans l écrit quelques récits de la grande expérience humaine née dans le milieu populaire et qui désormais intègrent l espace de l écriture à chaque nouvelle version produite. Les bagages formulaires, comme les épithètes, les interventions du narrateur et la propre relation des signifations de l intrigue avec les structures de l imaginaire toujours présentes dans l humanité, démontrent le rapprochement entre l oralité et écriture. En suivant les discussions théoriques de Zumthor (1993, 1997, 2000) et par l interation du lecteur avec le texte, on constate que ces éléments relatifs à l oralité rendent possibl existence d une performance dans l écrit a partir des impressions cinesthésiques qui chaque lecture provoque chez le lecteur et récepteur d un texte narratif qui revendique, automatiquement, la construction d une ouvrage seulement possible à chaque instant de l interation, par le processus esthétique de la réception. Même au niveau d écrit, ou l intensité de sa présence est diminuée en raison de l absence d un corps physique qui transmet, qui développe, qui opere littéralement le texte par la voix et qui réunit l écoute et la vision de l auditeur, la performance produite s interpose entre le corps du lecteur qui agit sur le texte et en même temps reçoit les sensations lui permettant l expérience esthétique. Ainsi, dans l expérience de la lecture de Contes de Perrault est possible percevoir les éléments qui renvoient à la forme du conte de tradition populaire. Même déjà influencée par l écrit, le lecteur peut identifier, dans cette oeuvre, les possibilités determinantes de la dynamique perpétuel dans la transmission de ses textes: le plaisir de la pratique de l écoute des histoires contées oralement et le plaisir de la pratique de lectures silencieuses et solitaires. Dans ce chemin le lecteur devoit chercher les sens perdus, ici, rencontrés avec l aide des discours littéraires, linguistique, folklorique, anthropologique et psycanalytique sur la surface du texte narratif merveilleux. Outre cela, ces discours collaborent avec le lecteur qui retrouvent les voix emprisonnées par l écrit dans la virtualité et dans émergence d une performance

Eu não vi, eles me contaram. Uma experiência de transmissão e recepção oral no cotidiano dos sem-terra

Conselho Nacional de Desenvolvimento Científico e Tecnológico