The Strengths and Difficulties Questionnaire (SDQ-Fin) among Finnish children and adolescents

Objective: The psychometric properties of The Strengths and Difficulties Questionnaire (SDQ-Fin), a Finnish version of a brief screening instrument were studied. Emotional and behavioural problems of 7- to 15-year-olds measured by the SDQ were reported, as well as the occurrence of self-reported eating disturbance symptoms and alcohol use among adolescents. Methods and samples: The cross-sectional school survey included 25 items of the SDQ-Fin, items about eating disturbance, alchol use and child psychiatric help-seeking. The study consists of three community samples: 1. The SDQ-Fin parent (n = 703) and teacher (n = 376) versions of 7 – 12 –year-olds, and self-report versions (n = 528) of 11 – 16 years-olds were obtained, and 2. the parent (n = 81) and self-report versions of 15-16 –year olds (n = 129) were obtained in Laitila and Pyhäranta. 3. The self-report versions of 13 – 16 – year-olds (n = 1458) in Salo and Rovaniemi were obtained. Results: The psychometric properties of the SDQ-Fin were for the most part comparable with the other European SDQ research results. The internal consistency (Cronbach’s alpha = 0.71 in all informants’ reports) and inter-rater reliability (between the pairs of reports r = 0.38 - 0.44) were adequate. The concurrent validity (r = 0.75 between the SDQ and the CBCL total scores; r = 0.71 between the SDQ and the YSR total scores) was sufficient. Factor analysis of the SDQ self-report generally confirmed the postulated structure for girls and boys, except for the conduct problems scale of boys, which was fused with emotional symptoms and with hyperactivity. The response rates, means and cut-off points of the SDQ self-report scores were similar to those found, e.g. in Norway and in Britain. A high level of psychological problems, especially emotional and conduct problems and hyperactivity-inattention, were associated with high level of eating disturbance symptoms and alcohol use. Conclusion: The results showed that the psychometric properties of the SDQ-Fin are adequate and provide additional confirmation of the usefulness of the SDQ-Fin for, e.g. screening, epidemiological research and clinical purposes.

Drinking locations and alcohol-related harm: Cross-sectional and longitudinal associations in a sample of young Swiss men.

BACKGROUND: Alcohol consumption--in particular drinking volume (DV) and risky single occasion drinking (RSOD)--has been related to a wide range of negative consequences and health problems. Previous studies also suggested that drinking in certain locations may be more strongly associated with the occurrence of alcohol-related harm than drinking in others. However, they were conducted in countries culturally and legally different from European countries and were limited to cross-sectional designs. This study investigates the cross-sectional and longitudinal associations of alcohol-related harm with DVs in different locations in a sample of young Swiss men. METHODS: A representative sample of 4536 young Swiss male drinkers completed baseline and 15-month follow-up questionnaires. These assessed DVs in 11 locations, alcohol-related harm (i.e. number of alcohol-related consequences and alcohol use disorder criteria) and frequency of RSOD. Cross-sectional and longitudinal associations of alcohol-related harm with DVs in each location were tested using regression models, with and without adjustment for frequency of RSOD. RESULTS: Both cross-sectional and longitudinal analyses showed significant positive associations between alcohol-related harm and DVs at friends' homes, in discos/nightclubs and in outdoor public places, when controlling for frequency of RSOD. In contrast, the contribution of DVs at one's own home and in restaurants was consistently not significant when adjusted for frequency of RSOD. When controlling for RSOD, associations between alcohol-related harm and DVs in bars/pubs, when playing sports, during other leisure activities, at cinemas/theatres, during sporting events, and during special events were not consistent between cross-sectional and longitudinal analyses. CONCLUSION: Results suggest that prevention interventions should not only target reducing the overall volume of alcohol consumed and the frequency of RSOD in general, but they should additionally focus on limiting alcohol consumption in outdoor public places, discos/nightclubs, and in friends' homes in particular, or at least on preventing harm occurring in these occasions.

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Varastojen hallinta projektiohjautuvassa toimintaympäristössä

Varastoihin sitoutuu yrityksissä paljon arvokasta pääomaa ja varastojen hallinnan osaaminen on noussut yhdeksi kilpailueduksi liiketoiminnassa. Varastoinnilla pyritään suojautumaan puutetilanteilta ja ylläpitämään haluttu palveluaste. Tutkielmassa selvitetään case yrityksen varastojen hallinnan nykytila ja nostetaan esille varastojen hallinnan ongelmatilanteet. Työn tavoitteena on muodostaa organisaation johdolle kokonaiskuva case yrityksen varastoista ja varastoinnin nykytilasta. Työ toteutetaan tapaustutkimuksena, ja aineisto kerätään organisaation henkilökunnasta valituille henkilöille suoritetuilla haastatteluilla. Haastatteluilla saadaan selville varastojen hallinnan toimintamallit ja toiminnan ongelmakohdat varastopaikkakunnilla. Työn tuloksena muodostetaan kokonaiskuva yrityksen varastotoiminnoista ja saadaan selville ongelmien taustalla olevat syyt. Ongelmien perusteella luodaan malli kehitystyön etenemiselle. Lopuksi työssä esitetään toimenpide- ehdotuksia varastojen hallinnan toimintojen jatkokehittämiseen.

Tuotannonsuunnittelu- ja -ohjausprosessin kehittäminen konepajayrityksessä

Tehdyssä kirjallisuus- ja teoriakatsauksessa vuosien 2006 - 2010 välisenä aikana, Keski-Suomessa toimivan konepajateollisuuden järjestelmätoimittajayrityksen toimeksiannosta, pyrittiin muodostamaan kokonaiskuva laajasta tuotannonsuunnittelun ja -ohjauksen aihealueesta. Perustutkimuskysymykset liittyivät ns. MPC-systeemiin, jolla tarkoitetaan sitä, että tuotannonsuunnittelu- ja ohjauskysymyksissä on huomioitava aina henkilöiden, organisaation, teknologioiden ja prosessien muodostama kokonaisuus. Operatiivisen johtamisen tehtävänä on yrityksen tuotteita koskevan kysynnän ja tarjonnan tasapainottaminen niin, että resursseja käytettäisiin ja tarvittaisiin mahdollisimman vähän vastattaessa kysyntään asiakasvaatimukset huomioiden. Tuotantostrategian pohjalta on voitava rakentaa MPC-systeemi, jonka avulla ja jota kehittäen tuotanto saavuttaisi sille asetetut suorituskykytavoitteet mm. kustannusten, laadun, nopeuden, luotettavuuden sekä tuottavuuskehityksen osalta. Työssä tarkasteltiin yleisen kolmitasoisen viitekehyksen kautta ”perinteisistä MPC-systeemien perusratkaisuista” hierarkkisia, suunnittelu- ja laskentaintensiiviä, MRP-pohjaisia sekä yksinkertaistamiseen ja nopeuteen perustuvia JIT/Lean -menetelmiä. Tämä viitekehys käsittää: 1) kysynnän- ja resurssien hallinnan, 2) yksityiskohtaisemman kapasiteetin ja materiaalien hallinnan sekä 3) tarkemman tuotannon ja hankintojen ohjauksen sekä tuotannon lattiatason osa-alueet. Johtamisen ja MPC-systeemien kehittämisen ”uusina aaltoina ja näkökulmina” raportissa käsiteltiin myös johtamisen eri koulukuntia sekä em. viitekehyksen pohjalta tarvittavia tietojärjestelmiä. Olennaisimpana johtopäätöksenä todettiin, että MRP-pohjaisten ratkaisujen lisäksi, etenkin monimutkaisia tuotteita tilausohjautuvasti valmistavien kappaletavarateollisuuden yritysten, on mahdollisesti hyödynnettävä myös kehittyneempiä suunnittelu- ja ohjausjärjestelmiä. Lisäksi huomattiin, että ”perinteisten strategioiden” rinnalle yritysten on nostettava myös tieto- ja viestintäteknologiastrategiat. On tärkeää ymmärtää, että täydellistä MPC-systeemiä ei ole vielä keksitty: jokaisen yrityksen tehtäväksi ja vastuulle jää ”oman totuutensa” muodostaminen ja systeeminsä rakentaminen sen pohjalta.

Sorption kinetics and intrapaticulate diffusivity of As(III) bioremediation from aqueous solution, using modified and unmodified coconut fiber

The pollution and toxicity problems posed by arsenic in the environment have long been established. Hence, the removal and recovery remedies have been sought, bearing in mind the efficiency, cost effectiveness and environmental friendliness of the methods employed. The sorption kinetics and intraparticulate diffusivity of As (III) bioremediation from aqueous solution using modified and unmodified coconut fiber was investigated. The amount adsorbed increased as time increased, reaching equilibrium at about 60 minutes. The kinetic studies showed that the sorption rates could be described by both pseudo-first order and pseudo-second order process with the later showing a better fit with a value of rate constant of 1.16 x 10-4 min-1 for the three adsorbent types. The mechanism of sorption was found to be particle diffusion controlled. The diffusion and boundary layer effects were also investigation. Therefore, the results show that coconut fiber, both modified and unmodified is an efficient sorbent for the removal of As (III) from industrial effluents with particle diffusion as the predominant mechanism.

BimTwin - Two component continuous process hygiene concept

The aim of this study was to examine suitability of BimTwin cleaning concept in card board machine to control microbiological activity and describe microbiological balance of the machine. In a review of literature is examined microbe and spore caused problems in paper industry. Biggest problems are deposits, which decrease runnability and cause quality errors. In this chapter is also introduced most common oxidizing biocides used in paper industry and described ATP assay as a microbiological monitoring method. In an experimental part are included BimTwin mill trial results, chemical condition monitoring methods and microbiological balance in a card board machine. In a second part are examined possibilities to effect hygiene of card board by chemical treatment of the surface size and coating. Result showed that BimTwin concept is suitable for card board machine as a cleaning concept, when chemical dosing is fitted right. For proper dosing and secure tolerable hygiene level, chemical and microbiological monitoring is significant. Determining of the microbiological balance would have need more sampling. According to acquired results, broke turned out to be the biggest microbe source. Sizing and coating experiments showed that it is possible to improve hygiene of card board by chemically treated surface size and coating color.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.

Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Delay reduction in courts of justice – possibilities and challenges of process improvement in professional public organizations

Delays in the justice system have been undermining the functioning and performance of the court system all over the world for decades. Despite the widespread concern about delays, the solutions have not kept up with the growth of the problem. The delay problem existing in the justice courts processes is a good example of the growing need and pressure in professional public organizations to start improving their business process performance.This study analyses the possibilities and challenges of process improvement in professional public organizations. The study is based on experiences gained in two longitudinal action research improvement projects conducted in two separate Finnish law instances; in the Helsinki Court of Appeal and in the Insurance Court. The thesis has two objectives. First objective is to study what kinds of factors in court system operations cause delays and unmanageable backlogs and how to reduce and prevent delays. Based on the lessons learned from the case projects the objective is to give new insights on the critical factors of process improvement conducted in professional public organizations. Four main areas and factors behind the delay problem is identified: 1) goal setting and performance measurement practices, 2) the process control system, 3) production and capacity planning procedures, and 4) process roles and responsibilities. The appropriate improvement solutions include tools to enhance project planning and scheduling and monitoring the agreed time-frames for different phases of the handling process and pending inventory. The study introduces the identified critical factors in different phases of process improvement work carried out in professional public organizations, the ways the critical factors can be incorporated to the different stages of the projects, and discusses the role of external facilitator in assisting process improvement work and in enhancing ownership towards the solutions and improvement. The study highlights the need to concentrate on the critical factors aiming to get the employees to challenge their existing ways of conducting work, analyze their own processes, and create procedures for diffusing the process improvement culture instead of merely concentrating of finding tools, techniques, and solutions appropriate for applications from the manufacturing sector

Differential Evolution approach and parameter estimation of chaotic

Parameter estimation still remains a challenge in many important applications. There is a need to develop methods that utilize achievements in modern computational systems with growing capabilities. Owing to this fact different kinds of Evolutionary Algorithms are becoming an especially perspective field of research. The main aim of this thesis is to explore theoretical aspects of a specific type of Evolutionary Algorithms class, the Differential Evolution (DE) method, and implement this algorithm as codes capable to solve a large range of problems. Matlab, a numerical computing environment provided by MathWorks inc., has been utilized for this purpose. Our implementation empirically demonstrates the benefits of a stochastic optimizers with respect to deterministic optimizers in case of stochastic and chaotic problems. Furthermore, the advanced features of Differential Evolution are discussed as well as taken into account in the Matlab realization. Test "toycase" examples are presented in order to show advantages and disadvantages caused by additional aspects involved in extensions of the basic algorithm. Another aim of this paper is to apply the DE approach to the parameter estimation problem of the system exhibiting chaotic behavior, where the well-known Lorenz system with specific set of parameter values is taken as an example. Finally, the DE approach for estimation of chaotic dynamics is compared to the Ensemble prediction and parameter estimation system (EPPES) approach which was recently proposed as a possible solution for similar problems.

Smoking during pregnancy and fetal brain development

Background: Although the knowledge of adverse effects of smoking during pregnancy has increased in recent years, more research is needed to gain a better understanding of the effects of smoking during pregnancy. Smoking exposure is the most common preventable factor that causes adverse pregnancy outcomes. Aims and Methods: First, data on smoking habits during pregnancy from the Nordic Medical Birth Registers was used to study the national differences in trends of smoking during pregnancy. Second, the effects of prenatal smoking exposure on fetal brain development, assessed by brain MRI at term age, were studied by using data from the multidisciplinary PIPARI Study consisting of a 6-year cohort of VLBW/VLGA infants (n = 232, of which 18.1% were exposed to prenatal smoking) born in Turku University Hospital, Finland. Third, the effects of prenatal smoking exposure on psychiatric morbidity and use of psychotropic medication were studied in a cohort of children born from 1987–1989 in Finland (n = 175,869, of which 15.3% were exposed). The data used were obtained from population-based longitudinal registers from the National Institute of Health and Welfare, the Statistics Finland, and the Finnish Social Insurance Institution. Results: Smoking rates during pregnancy differed considerably between the countries. Smoking rates were highest among teenagers and women with lower socioeconomic positions. The smoking prevalence was found to be increasing among teenagers in both Finland and Norway. Prenatal smoking exposure was associated with smaller frontal lobe and cerebellar volumes in preterm infants. A clear association was found between prenatal smoking exposure and psychiatric morbidity treated with specialized hospital care and the use of various psychotropic medications. Conclusions: Prenatal smoking exposure had adverse effects on fetal brain development. These effects might explain part of the association found between smoking exposure and psychiatric problems in later life. Our study suggests that prenatal smoking exposure is linked with both mild and severe psychiatric problems. This study emphasizes the importance of efforts to reduce smoking during pregnancy.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Cost-efficient virtual machine management : provisioning, admission control, and consolidation

One of the main challenges in Software Engineering is to cope with the transition from an industry based on software as a product to software as a service. The field of Software Engineering should provide the necessary methods and tools to develop and deploy new cost-efficient and scalable digital services. In this thesis, we focus on deployment platforms to ensure cost-efficient scalability of multi-tier web applications and on-demand video transcoding service for different types of load conditions. Infrastructure as a Service (IaaS) clouds provide Virtual Machines (VMs) under the pay-per-use business model. Dynamically provisioning VMs on demand allows service providers to cope with fluctuations on the number of service users. However, VM provisioning must be done carefully, because over-provisioning results in an increased operational cost, while underprovisioning leads to a subpar service. Therefore, our main focus in this thesis is on cost-efficient VM provisioning for multi-tier web applications and on-demand video transcoding. Moreover, to prevent provisioned VMs from becoming overloaded, we augment VM provisioning with an admission control mechanism. Similarly, to ensure efficient use of provisioned VMs, web applications on the under-utilized VMs are consolidated periodically. Thus, the main problem that we address is cost-efficient VM provisioning augmented with server consolidation and admission control on the provisioned VMs. We seek solutions for two types of applications: multi-tier web applications that follow the request-response paradigm and on-demand video transcoding that is based on video streams with soft realtime constraints. Our first contribution is a cost-efficient VM provisioning approach for multi-tier web applications. The proposed approach comprises two subapproaches: a reactive VM provisioning approach called ARVUE and a hybrid reactive-proactive VM provisioning approach called Cost-efficient Resource Allocation for Multiple web applications with Proactive scaling. Our second contribution is a prediction-based VM provisioning approach for on-demand video transcoding in the cloud. Moreover, to prevent virtualized servers from becoming overloaded, the proposed VM provisioning approaches are augmented with admission control approaches. Therefore, our third contribution is a session-based admission control approach for multi-tier web applications called adaptive Admission Control for Virtualized Application Servers. Similarly, the fourth contribution in this thesis is a stream-based admission control and scheduling approach for on-demand video transcoding called Stream-Based Admission Control and Scheduling. Our fifth contribution is a computation and storage trade-o strategy for cost-efficient video transcoding in cloud computing. Finally, the sixth and the last contribution is a web application consolidation approach, which uses Ant Colony System to minimize the under-utilization of the virtualized application servers.