Measuring Cost of Poor Quality in Industrial Electronics

Quality is not only free but it can be a profit maker. Every dollar that is not spent on doing things wrong becomes a dollar right on the bottom line. The main objective of this thesis is to give an answer on how cost of poor quality can be measured theoretically correctly. Different calculation methods for cost of poor quality are presented and discussed in order to give comprehensive picture about measurement process. The second objective is to utilize the knowledge from the literature review and to apply it when creating a method for measuring cost of poor quality in supplier performance rating. Literature review indicates that P-A-F model together with ABC methodology provides a mean for quality cost calculations. These models give an answer what should be measured and how this measurement should be carried out. However, when product or service quality costs are incurred when quality character derivates from target value, then QLF seems to be most appropriate methodology for quality cost calculation. These methodologies were applied when creating a quality cost calculation method for supplier performance ratings.

Evaluation of alternative containers to determining the working width of fertilizer spreaders

Farmers have difficult of determining the evenness of transverse distribution and the working width, due the tests with this aim require equipments and complex methodologies. So, this study evaluates some alternative containers with the aim to allow a more accessible adjustment of the full width of the solid fertilizer spreaders. Four different containers were tested: i) standard container constructed in accordance with ISO 5690/1; ii) container of polyethylene (plastic trays) with screen shading to prevent the ricochet of material; iii) containers composed by boxes of long-life milk, and iv) containers composed by flowerpots (number 3.5). Also, three different spreaders were used for the tests. Alternative containers showed greater retention of particles than the standardized containers. The full width of work obtained for the coefficients of variation of 12.5; 15; 17.5 and 20%, ranged due the containers in the different pathways. The flowerpots of polyethylene showed similar results to the standardized containers. The heights of the containers were more important for its efficiency than its area of collection.

Effect of working pressure at different spray nozzles on drift quantification in wind tunnel

Each year, there is an increase in pesticide consumption and in its importance of use in the large-scale agricultural production, being fundamental the knowledge of application technology to the activity success. The objective of the present study was to evaluate the influence of working pressure on the drift generated by different spray nozzles, assessed in wind tunnel. The treatments were composed of two spray nozzles AXI 110015 and AXI 11002 with pressure levels of 276 and 414 kPa. The spray solution was composed by water and NaCl at 10%. The applications were conducted at wind speed of 2.0 m s-1, being the drift collected at 5.0; 10.0 and 15.0 m away from the spray boom and at heights of 0.2; 0.4; 0.6; 0.8 e 1.0 m from the tunnel floor. To both spray nozzles, the greatest drift was collected at the smallest distance to the spray-boom and at the lowest height. The AXI 11002 nozzle gave a smaller drift relative to the AXI 110015 nozzle for the two tested pressures and for all the collection points. Regardless of the nozzle, a rise in the working pressure increases the spray drift percentage at all distances in the wind tunnel.

Competence in intensive and critical care nursing - development of a basic assessment scale for graduating nursing students

Intensive and critical care nursing is a speciality in its own right and with its own nature within the nursing profession. This speciality poses its own demands for nursing competencies. Intensive and critical care nursing is focused on severely ill patients and their significant others. The patients are comprehensively cared for, constantly monitored and their vital functions are sustained artificially. The main goal is to win time to cure the cause of the patient’s situation or illness. The purpose of this empirical study was i) to describe and define competence and competence requirements in intensive and critical care nursing, ii) to develop a basic measurement scale for competence assessment in intensive and critical care nursing for graduating nursing students, and iii) to describe and evaluate graduating nursing students’ basic competence in intensive and critical care nursing by seeking the reference basis of self-evaluated basic competence in intensive and critical care nursing from ICU nurses. However, the main focus of this study was on the outcomes of nursing education in this nursing speciality. The study was carried out in different phases: basic exploration of competence (phase 1 and 2), instrumentation of competence (phase 3) and evaluation of competence (phase 4). Phase 1 (n=130) evaluated graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care with Basic Knowledge Assessment Tool version 5 (BKAT-5, Toth 2012). Phase 2 focused on defining competence in intensive and critical care nursing with the help of literature review (n=45 empirical studies) as well as competence requirements in intensive and critical care nursing with the help of experts (n=45 experts) in a Delphi study. In phase 3 the scale Intensive and Critical Care Nursing Competence Scale (ICCN-CS) was developed and tested twice (pilot test 1: n=18 students and n=12 nurses; pilot test 2: n=56 students and n=54 nurses). Finally, in phase 4, graduating nursing students’ competence was evaluated with ICCN-CS and BKAT version 7 (Toth 2012). In order to develop a valid assessment scale of competence for graduating nursing students and to evaluate and establish the competence of graduating nursing students, empirical data were retrieved at the same time from both graduating nursing students (n=139) and ICU nurses (n=431). Competence can be divided into clinical and general professional competence. It can be defined as a specific knowledge base, skill base, attitude and value base and experience base of nursing and the personal base of an intensive and critical care nurse. Personal base was excluded in this self-evaluation based scale. The ICCN-CS-1 consists of 144 items (6 sum variables). Finally, it became evident that the experience base of competence is not a suitable sum variable in holistic intensive and critical care competence scale for graduating nursing students because of their minor experience in this special nursing area. ICCN-CS-1 is a reliable and tolerably valid scale for use among graduating nursing students and ICU nurses Among students, basic competence of intensive and critical care nursing was self-rated as good by 69%, as excellent by 25% and as moderate by 6%. However, graduating nursing students’ basic biological and physiological knowledge and skills for working in intensive and critical care were poor. The students rated their clinical and professional competence as good, and their knowledge base and skill base as moderate. They gave slightly higher ratings for their knowledge base than skill base. Differences in basic competence emerged between graduating nursing students and ICU nurses. The students’ self-ratings of both their basic competence and clinical and professional competence were significantly lower than the nurses’ ratings. The students’ self-ratings of their knowledge and skill base were also statistically significantly lower than nurses’ ratings. However, both groups reported the same attitude and value base, which was excellent. The strongest factor explaining students’ conception of their competence was their experience of autonomy in nursing. Conclusions: Competence in intensive and critical care nursing is a multidimensional concept. Basic competence in intensive and critical care nursing can be measured with self-evaluation based scale but alongside should be used an objective evaluation method. Graduating nursing students’ basic competence in intensive and critical care nursing is good but their knowledge and skill base are moderate. Especially the biological and physiological knowledge base is poor. Therefore in future in intensive and critical care nursing education should be focused on both strengthening students’ biological and physiological knowledge base and on strengthening their overall skill base. Practical implications are presented for nursing education, practice and administration. In future, research should focus on education methods and contents, mentoring of clinical practice and orientation programmes as well as further development of the scale.

Working capital management in the small and medium-sized enterprises Case: Project-based business environment in Flowrox Oy

This Master´s thesis illustrates how growing a business ties up the company´s working capital and what the cost of committed capital. In order to manage a company´s working capital in rapid business growth phase, the thesis suggests that by monitoring and managing the operating and cash conversion cycles of customers´ projects, a company can find ways to secure the required amount of capital. The research method of this thesis was based on literature reviews and case study research. The theoretical review presents the concepts of working capital and provides the background for understanding how to improve working capital management. The company in subject is a global small and medium-sized enterprise that manufactures pumps and valves for demanding process conditions. The company is expanding, which creates lots of challenges. This thesis concentrates to the company´s working capital management and its efficiency through the supply chain and value chain perspective. The main elements of working capital management are inventory management, accounts receivable management and accounts payable management. Prepayments also play a significant role, particularly in project-based businesses. Developing companies´ working capital management requires knowledge from different kind of key operations´ in the company, like purchasing, production, sales, logistics and financing. The perspective to develop and describe working capital management is an operational. After literature reviews the thesis present pilot projects that formed the basis of a model to monitor working capital in the case company. Based on analysis and pilot projects, the thesis introduces a rough model for monitoring capital commitments in short time period. With the model the company can more efficiently monitor and manage their customer projects.

The role of advance payments in working capital management and profitability

The objective of this thesis is to study the role of received advance payments in working capital management by creating a new measurement and to study the relationship between advance payments and profitability. The study has been conducted using narrative literature review and quantitative research methods. The research was made analyzing 108 companies listed in Helsinki Stock Exchange. The results indicate that 68 % of the studied companies are receiving advance payments and the average cycle time for received advance payments is 13 days. A new key figure is created to include received advance payments into the calculation of working capital. Received advance payments shorten the working capital cycle, by 13 days, when they are used in the calculation. The role of advance payments is not as significant as the role of receivables and inventories but advance payments may have a larger role than payables if the company is receiving noticeable amounts of advance payments. There are three branches where companies are receiving more advance payments than average companies. The branches are project business and ICT and publishing sectors. There is a negative correlation between profitability and advance payments based on the results of this study.

Towards Inter-organizational Working Capital Management

Working capital is an investment which is tied up into the inventories and accounts receivable and which is released with accounts payable. Due to the current business landscape with tightened financial conditions and finance markets, organizations emphasize efficient working capital management. With efficient working capital management, a company can reduce the need of finance, free up cash, increase profitability, improve liquidity, increase the efficiency of operations, and decrease (financing) costs. From the perspective of an individual company, efficient working capital management means decreasing inventory levels by shortening the cycle time of inventories, decreasing accounts receivable by shortening the trade credit terms and effective collection procedures, and increasing the level of accounts payable by paying the suppliers later. From an inter-organizational perspective, however, working capital should not be sub-optimized by a single company but holistic view to working capital management through the supply chain should be adopted to create value and improve performance together. The purpose of this research is to take academic research as well as practical management towards inter-organizational working capital management. The thesis discusses the benefits as well as mechanisms of working capital management in the inter-organizational context and has two main objectives: (1) to examine the effect of inter-organizational working capital management on performance in the value chain context and (2) to develop models of working capital management for internal as well as inter-organizational value chains. The results of the archival research conducted in the value chain of the pulp and paper industry and the value chain of the automotive industry indicate that companies can increase relative profitability by managing working capital comprehensively by taking into account all three components, and holistically though the value chain. Companies in the value chain benefit from different strategies in working capital management depending on the position of the company in the value chain. This can be taken into account in inter-organizational working capital management. The effects of inter-organizational working capital management actions on the financing costs of working capital were studied via simulations. Simulations also show that the value chain and individual companies benefit from an inter-organizational view to working capital management. Inter-organizational working capital management actions include for example: shortening the cycle time of inventories, reducing product costs, shifting inventories, shortening payment terms, and considering the cost of capital. The thesis also provides solutions for the practical requirements for tools to control working capital. The design science part of the research introduces the adjusted cash conversion cycle (ACCC) model for internal value chains, as well as models for working capital management in the inter-organizational value chain context: the working capital management model (WCMM) and the financial cycle time model (FCTM) designed in corporation and product levels respectively. This research contributes to literature on working capital management and interorganizational accounting. The research gives a holistic, inter-organizational view to the management of working capital. It advances the knowledge in working capital management on operational level, increases knowledge in the recently risen theme of supply chainoriented, collaborative working capital management, combines management accounting research with supply chain management research, and contributes to the demand of practical inter-organizational accounting methods. In addition, the research has strong practical focus as new managerial methods are introduced.

Energy Efficiency of a Diesel-Electric MobileWorking Machine

The power demand of many mobile working machines such as mine loaders, straddle carriers and harvesters varies significantly during operation, and typically, the average power demand of a working machine is considerably lower than the demand for maximum power. Consequently, for most of the time, the diesel engine of a working machine operates at a poor efficiency far from its optimum efficiency range. However, the energy efficiency of dieseldriven working machines can be improved by electric hybridization. This way, the diesel engine can be dimensioned to operate within its optimum efficiency range, and the electric drive with its energy storages responds to changes in machine loading. A hybrid working machine can be implemented in many ways either as a parallel hybrid, a series hybrid or a combination of these two. The energy efficiency of hybrid working machines can be further enhanced by energy recovery and reuse. This doctoral thesis introduces the component models required in the simulation model of a working machine. Component efficiency maps are applied to the modelling; the efficiency maps for electrical machines are determined analytically in the whole torque–rotational speed plane based on the electricalmachine parameters. Furthermore, the thesis provides simulation models for parallel, series and parallel-series hybrid working machines. With these simulation models, the energy consumption of the working machine can be analysed. In addition, the hybridization process is introduced and described. The thesis provides a case example of the hybridization and dimensioning process of a working machine, starting from the work cycle of the machine. The selection and dimensioning of the hybrid system have a significant impact on the energy consumption of a hybrid working machine. The thesis compares the energy consumption of a working machine implemented by three different hybrid systems (parallel, series and parallel-series) and with different component dimensions. The payback time of a hybrid working machine and the energy storage lifetime are also estimated in the study.

Virtual technology and haptic interface solutions for design and control of mobile working machines

Commercially available haptic interfaces are usable for many purposes. However, as generic devices they are not the most suitable for the control of heavy duty mobile working machines like mining machines, container handling equipment and excavators. Alternative mechanical constructions for a haptic controller are presented and analysed. A virtual reality environment (VRE) was built to test the proposed haptic controller mechanisms. Verification of an electric motor emulating a hydraulic pump in the electro-hydraulic system of a mobile working machine is carried out. A real-time simulator using multi-body-dynamics based software with hardware-in-loop (HIL) setup was used for the tests. Recommendations for further development of a haptic controller and emulator electric motor are given.

Iran's domestic and foreign policies

Iran has a reputation of being a problematic country. Right now, it is proceeding with its nuclear program despite the opposition of the West and neighboring countries and the massive sanctions inflicted upon it. The country is also struggling with domestic issues. Half of Iran’s population belongs to different ethnic or religious minorities. They have poor rights to express their culture in the country, which is a cause of dissatisfaction among non-Shiite and non-Persian citizens. After the Arab Spring, the situation in Iran is getting more topical than ever. In the Syrian conflict, the Shiite Iran is constantly giving support to al-Assad’s regime. These are all factors that have aggravated the already irritated relations between Iran and the West.

Working Capital Management Model in value chains

The objective of this Master’s thesis is to create a calculation model for working capital management in value chains. The study has been executed using literature review and constructive research methods. Constructive research methods were mainly modeling. The theory in this thesis is founded in research articles and management literature. The model is developed for students and researchers. They can use the model for working capital management and comparing firms to each other. The model can also be used to cash management. The model tells who benefits and who suffers most in the value chain. Companies and value chains cash flows can be seen. By using the model can be seen are the set targets really achieved. The amount of operational working capital can be observed. The model enables user to simulate the amount of working capital. The created model is based on cash conversion cycle, return on investment and cash flow forecasting. The model is tested with carefully considered figures which seem to be though realistic. The modeled value chain is literally a chain. Implementing this model requires from the user that he/she have some kind of understanding about working capital management and some figures from balance sheet and income statement. By using this model users can improve their knowledge about working capital management in value chains.

It’s a workflow engine. It’s working with linked data. It’s repository! – Supporting electronic thesis related processes in University of Helsinki library

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Working towards the invisible repository

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014