An overview of diversion strategies for Australian drug-related offenders

This paper provides a descriptive overview of options for diversion of drug-related offenders from the criminal justice system. Drug-related offences include drug offences (for example, possession of a prohibited substance); offences that are directly linked to intoxication (for example, drink-driving or assault); and offences committed to support drug use (for example, theft). After an offence has been detected by police, multiple opportunities for diversion occur throughout the criminal justice process. (a) Pre-arrest: when an offence is first detected, prior to a charge being laid. This is known as police diversion and includes fines, warnings and cautions, sometimes with educational information or referral to assessment and treatment. (b) Pre-trial: when a charge is made but before the matter is heard at court. Examples are treatment as a condition of bail, conferencing and prosecutor discretion. (c) Pre-sentence: a delay of sentence while assessment and treatment are sought. (d) Post-sentence: as part of sentencing, for example suspended sentences, drug courts, noncustodial sentences and circle sentencing. (e) Pre-release: prior to release from a sentence, on parole. Issues for diversion programmes include net widening, the ethics of coercion to treatment, the needs of families and intersectoral collaboration. A framework for diversion is presented in which increasingly treatment-focused and coercive diversion strategies are used as offenders' criminal careers and drug problems increase.

Presentation and mechanisms of concussion in professional Rugby League football

The present study prospectively recorded the circumstances, incidence, mechanisms, injury detection and presentation of concussion in Rugby League. Forty-three consecutive concussions were recorded over three competitive seasons in 175 professional Rugby League players. Data showed (i) the incidence of concussion ranged from 5.9 to 9.8 injuries/1000 player hours across grades - except when age-group players were mismatched (18.4); (ii) 'head-high tackles' accounted for a significant number of concussions; (iii) concussion rarely involved a loss of consciousness with the most common indicators of concussion being amnesia, headache and unsteadiness, with the mechanism of injury often missed; and (iv) concussion often occurs concurrently with other injuries. Concussion (including repeated episodes) is a common injury in Rugby League. Systematic mental status questioning is warranted whenever concussion is suspected. Coaches, trainers and players need more education in the recognition and management of concussion. Stricter penalties for illegal 'head-high' tackling are strongly recommended.

The recent Australian debate about the prohibition on cannabis use

This paper outlines the ethical arguments used in the Australian debate about whether or not to relax the prohibition on cannabis use by adults. Over the past two decades a rising prevalence of cannabis use in the Australian population has led to proposals for the decriminalization of the personal use of cannabis. Three states and territories have removed criminal penalties for personal use while criminal penalties are rarefy imposed in the remaining states. Libertarian arguments for legalization of cannabis use have attracted a great deal of media interest but very little public and political support. Other arguments in favour of decriminalization have attracted more support. One has been the utilitarian argument that prohibition has failed to deter cannabis use and the social costs of its continuation outweigh any benefits that it produces. Another has been the argument from hypocrisy that cannabis is less harmful than alcohol and so, on the grounds of consistency, if alcohol is legally available then so should cannabis. To date public opinion has not favoured legalization, although support for the decriminalization of personal cannabis use has increased. In the long term, the outcome of the debate may depend more upon trends in cannabis use and social attitudes among young adults than upon the persuasiveness of the arguments for a relaxation of the prohibition of cannabis.

Growth regime map for liquid-bound granules: further development and experimental validation

An attempt was made to quantify the boundaries and validate the granule growth regime map for liquid-bound granules recently proposed by Iveson and Litster (AlChE J. 44 (1998) 1510). This regime map postulates that the type of granule growth behaviour is a function of only two dimensionless groups: the amount of granule deformation during collision (characterised by a Stokes deformation number, St(def)) and the maximum granule pore saturation, s(max). The results of experiments performed with a range of materials (glass ballotini, iron ore fines, copper chalcopyrite powder and a sodium sulphate and cellulose mixture) using both drum and high shear mixer granulators were examined. The drum granulation results gave good agreement with the proposed regime map. The boundary between crumb and steady growth occurs at St(def) of order 0.1 and the boundary between steady and induction growth occurs at St(def) of order 0.001. The nucleation only boundary occurs at pore saturations that increase from 70% to 80% with decreasing St(def). However, the high shear mixer results all had St(def) numbers which were too large. This is most likely to be because the chopper tip-speed is an over-estimate of the average impact velocity granules experience and possibly also due to the dynamic yield strength of the materials being significantly greater than the yield strengths measured at low strain rates. Hence, the map is only a useful tool for comparing the granulation behaviour of different materials in the same device. Until we have a better understanding of the flow patterns and impact velocities in granulators, it cannot be used to compare different types of equipment. Theoretical considerations also revealed that several of the regime boundaries are also functions of additional parameters not explicitly contained on the map, such as binder viscosity. (C) 2001 Elsevier Science B.V. All rights reserved.

Advances in neurotrauma in Australia 1970-2000

The management of neurotrauma in Australia has been one of the significant public health triumphs during the last 30 years of the 20th century. State and national government agencies act in a coordinated fashion to collect data and to promote research on how to manage neurotrauma patients. Between 1970 and 1995, fatalities from road accidents decreased by 47%. Hospital admissions have decreased by 40% despite a 40% increase in the population and a 120% increase in registered vehicles. Fatalities per 10,000 registered vehicles were 8.05% in 1970 and they fell to 1.84% per vehicles in 1995, while fatalities per 10;000 population were 3 in 1970 falling to 1.11 in 1995. Hospitalization from road crashes decreased 23% between March 1988 and March 1997. Public education has steadily improved, backed by the state public health sources. A uniform code of road safety laws has been adopted, backed by legislation and legal penalties and increasing police enforcement. Clinical care of patients has improved as a result of faster communications, tele-medicine, trauma systems, the CT scanner; intensive care units, and improved monitoring. Patient rehabilitation and counseling are now carried out at units accredited by the Australian Council on Health Care Standards.

Effects of slurry rheology on industrial grinding performance

To determine the effect of slurry rheology on industrial grinding performance, 45 surveys were conducted on 16 full-scale grinding mills in five sites. Four operating variables - mill throughput, slurry density, slurry viscosity and feed fines content-were investigated. The rheology of the mill discharge slurries was measured either on-line or off-line, and the data were processed using a standard procedure to obtain a full range of flow curves. Multi-linear regression was employed as a statistical analysis tool to determine whether or not rheological effects exert an influence on industrial grinding, and to assess the influence of the four mill operating conditions on mill performance in terms of the Grinding Index, a criterion describing the overall breakage of particles across the mill. The results show that slurry rheology does influence industrial grinding. The trends of these effects on Grinding Index depend upon the rheological nature of the slurry-whether the slurries are dilatant or pseudoplastic, and whether they exhibit a high or low yield stress. The interpretation of the regression results is discussed, the observed effects are summarised, and the potential for incorporating rheological principles into process control is considered, Guidelines are established to improve industrial grinding operations based on knowledge of the rheological effects. This study confirms some trends in the effect of slurry rheology on grinding reported in the literature, and extends these to a broader understanding of the relationship between slurry properties and rheology, and their effects on industrial milling performance. (C) 2002 Elsevier Science B.V. All rights reserved.

Investigation of the effects of chrome ball charge on slurry rheology and milling performance

Ten surveys of the ball milling circuit at the Mt Isa Mines (MIM) Copper Concentrator were conducted aiming to identify any changes in slurry theology caused by the use of chrome balls charge, and the associated effect on grinding performance. Slurry theology was measured using an on-line viscometer. The data were mass balanced and analysed with statistical tools. Comparison of the rheogram demonstrated that slurry density and fines content affected slurry rheology significantly, while the effect of the chrome ball charge being negligible. Statistical analysis showed the effects of mill throughput and cyclone efficiency on the Grinding Index (a term describing the overall breakage). There was no difference in the Grinding Index between using the chrome ball charge and the ordinary steel ball charge. (C) 2002 Elsevier Science Ltd. All rights reserved.

Parenthood and pay in Australia and the UK: evidence from workplace surveys

This article addresses the effect of parenthood on pay, examining potential reasons for-differences between Australia and the UK that are evident in spite of their similarly minimalist. male, breadwinner style approaches to work/family issues, Although cross-national differences reflect complex intersections of policy combinations, institutional frameworks, patterns of employment and gender contracts that cannot be assessed in a single analysis, the data used in this analysis uncover some of the factors that contribute to different outcomes. Motherhood penalties in the UK appear to be associated primarily with the comparatively low level of part-time earnings in that country, while higher premiums to fatherhood at least in part reflect a wider overall wage distribution. These findings reinforce the heed to interpret earnings effects of parenthood within the context of national patterns of employment and wage distribution; and highlight the breadth of strategies needed to deliver more equitable outcomes.

The JK three-product cyclone - performance and potential applications

In spite of their wide application in comminution circuits, hydrocyclones have at least one significant disadvantage in that their operation inherently tends to return the fine denser liberated minerals to the grinding mill. This results in unnecessary overgrinding which adds to the milling cost and can adversely affect the efficiency of downstream processes. In an attempt to solve this problem, a three-product cyclone has been developed at the Julius Kruttschnitt Mineral Research Centre (JKMRC) to generate a second overflow in which the fine dense liberated minerals can be selectively concentrated for further treatment. In this paper, the design and operation of the three-product cyclone are described. The influence of the length of the second vortex finder on the performance of a 150-mm unit treating a mixture of magnetite and silica is investigated. Conventional cyclone tests were also conducted under similar conditions. Using the operational performance data of the three-product and conventional cyclones, it is shown that by optimising the length of the second vortex finder, the amount of fine dense mineral particles that reports to the three-product cyclone underflow can be reduced. In addition, the three-product cyclone can be used to generate middlings stream that may be more suitable for flash flotation than the conventional cyclone underflow, or alternatively, could be classified with a microscreen to separate the valuables from the gangue. At the same time, a fines stream having similar properties to those of the conventional overflow can be obtained. Hence, if the middlings stream was used as feed for flash flotation or microscreening, the fines stream could be used in lieu of the conventional overflow without compromising the feed requirements for the conventional flotation circuit. Some of the other potential applications of the new cyclone are described. (C) 2003 Elsevier Science B.V. All rights reserved.

Critical comparison of Julius Kruttschnitt Mineral Research Centre (JKMRC) blast fragmentation models

Blast fragmentation can have a significant impact on the profitability of a mine. An optimum run of mine (ROM) size distribution is required to maximise the performance of downstream processes. If this fragmentation size distribution can be modelled and controlled, the operation will have made a significant advancement towards improving its performance. Blast fragmentation modelling is an important step in Mine to Mill™ optimisation. It allows the estimation of blast fragmentation distributions for a number of different rock mass, blast geometry, and explosive parameters. These distributions can then be modelled in downstream mining and milling processes to determine the optimum blast design. When a blast hole is detonated rock breakage occurs in two different stress regions - compressive and tensile. In the-first region, compressive stress waves form a 'crushed zone' directly adjacent to the blast hole. The second region, termed the 'cracked zone', occurs outside the crush one. The widely used Kuz-Ram model does not recognise these two blast regions. In the Kuz-Ram model the mean fragment size from the blast is approximated and is then used to estimate the remaining size distribution. Experience has shown that this model predicts the coarse end reasonably accurately, but it can significantly underestimate the amount of fines generated. As part of the Australian Mineral Industries Research Association (AMIRA) P483A Mine to Mill™ project, the Two-Component Model (TCM) and Crush Zone Model (CZM), developed by the Julius Kruttschnitt Mineral Research Centre (JKMRC), were compared and evaluated to measured ROM fragmentation distributions. An important criteria for this comparison was the variation of model results from measured ROM in the-fine to intermediate section (1-100 mm) of the fragmentation curve. This region of the distribution is important for Mine to Mill™ optimisation. The comparison of modelled and Split ROM fragmentation distributions has been conducted in harder ores (UCS greater than 80 MPa). Further work involves modelling softer ores. The comparisons will be continued with future site surveys to increase confidence in the comparison of the CZM and TCM to Split results. Stochastic fragmentation modelling will then be conducted to take into account variation of input parameters. A window of possible fragmentation distributions can be compared to those obtained by Split . Following this work, an improved fragmentation model will be developed in response to these findings.

Stratigraphy, facies architecture and tectonic implications of the Upper Devonian to Lower Carboniferous Campwyn Volcanics of the northern New England Fold Belt

Upper Devonian to Lower Carboniferous strata of the Campwyn Volcanics of east central Queensland preserve a substantial sequence of first-cycle volcaniclastic sedimentary and coeval volcanic rocks that record prolonged volcanic activity along the northern New England Fold Belt. The style and scale of volcanism varied with time, producing an Upper Devonian sequence of mafic volcano-sedimentary rocks overlain by a rhyolitic ignimbrite-dominated sequence that passes upward into a Lower Carboniferous limestone-bearing sedimentary sequence. We define two facies associations for the Campwyn Volcanics. A lower facies association is dominated by mafic volcanic-derived sedimentary breccias with subordinate primary mafic volcanic rocks comprising predominantly hyaloclastite and peperite. Sedimentary breccias record episodic and high energy, subaqueous depositional events with clastic material sourced from a mafic lava-dominated terrain. Some breccias contain a high proportion of attenuated dense, glassy mafic juvenile clasts, suggesting a syn-eruptive origin. The lower facies association coarsens upwards from a lithic sand-dominated sequence through a thick interval of pebble- to boulder-grade polymict volcaniclastic breccias, culminating in facies that demonstrate subaerial exposure. The silicic upper facies association marks a significant change in eruptive style, magma composition and the nature of eruptive sources, as well as the widespread development of subaerial depositional conditions. Crystal-rich, high-grade, low- to high-silica rhyolite ignimbrites dominate the base of this facies association. Biostratigraphic age controls indicate that the ignimbrite-bearing sequences are Famennian to lower-mid Tournaisian in age. The ignimbrites represent extra-caldera facies with individual units up to 40 m thick and mostly lacking coarse lithic breccias. Thick deposits of pyroclastic material interbedded with fine-grained siliceous sandstone and mudstone (locally radiolarian-bearing) were deposited from pyroclastic flows that crossed palaeoshorelines or represent syn-eruptive, resedimented pyroclastic material. Some block-bearing lithic-pumice-crystal breccias may also reflect more proximal subaqueous silicic explosive eruptions. Crystal-lithic sandstones interbedded with, and overlying the ignimbrites, contain abundant detrital volcanic quartz and feldspar derived from the pyroclastic deposits. Limestone is common in the upper part of the upper facies association, and several beds are oolitic (cf. Rockhampton Group of the Yarrol terrane). Overall, the upper facies association fines upward and is transgressive, recording a return to shallow-marine conditions. Palaeocurrent data from all stratigraphic levels in the Campwyn Volcanics indicate that the regional sediment-dispersal direction was to the northwest, and opposed to the generally accepted notion of easterly sediment dispersal from a volcanic arc source. The silicic upper facies association correlates in age and lithology to Early Carboniferous silicic volcanism in the Drummond (Cycle 1) and Burdekin Basins, Connors Arch, and in the Yarrol terranes of eastern Queensland. The widespread development of silicic volcanism in the Early Carboniferous indicates that silicic (rift-related) magmatism was not restricted to the Drummond Basin, but was part of a more substantial silicic igneous province.

Gobernaciones y nueva gesti??n p??blica en Venezuela

A fines de los ???80, el Estado venezolano inici?? una descentralizaci??n pol??tico-territorial produciendo cambios en las gobernaciones, instancias receptoras de competencias en este proceso, las cuales realizan reformas a trav??s de la estrategia selectiva, incorporando algunas de la propuestas de la nueva gesti??n p??blica. Este trabajo explora estas reformas. Se observan: diferencias entre los servicios sociales y los relacionados directamente con la econom??a; privatizaci??n de ??stos; traspaso a la sociedad civil de algunos servicios sociales, creaci??n de entes descentralizados; automatizaci??n de procesos; flexibilizaci??n laboral; iniciativas con lento avance en rendici??n de cuentas por resultados y capacitaci??n para una nueva cultura administrativa. En conclusi??n: la tendencia es a la conformaci??n de una gesti??n p??blica eficiente sobre la base de la reducci??n del aparato estatal, de costos sociales, as?? como de costos y conflictos laborales y escasa incorporaci??n de las propuestas de participaci??n que permiten profundizar la democracia y promover el bienestar social.

O modelo organiza????es sociais: li????es e oportunidades de melhoria

As Organiza????es Sociais (OS) s??o organiza????es sem fins lucrativos, ???qualificadas??? para absorver atividades executadas por organiza????es p??blicas, nos termos e condi????es estabelecidas em contratos de gest??o firmados entre organiza????es e o governo. Este artigo relata os principais resultados do semin??rio ???O modelo OS: li????es e oportunidades de melhorias???, realizado em outubro de 2001, do qual participaram gestores e t??cnicos da Secretaria de Gest??o (SEGES), de OS, de ??rg??os supervisores dessas organiza????es, de ??rg??os intervenientes, e especialistas em gest??o p??blica. Com rela????o ??s OS analisadas, pode-se perceber que: a) h?? controv??rsias e ambig??idades quanto ?? sua natureza jur??dica e quanto ao processo de avalia????o dessas organiza????es; b) a gest??o de recursos humanos ?? afetada pela exist??ncia de grupos submetidos a distintos regimes de trabalho, isto ??, Estatuto dos Funcion??rios P??blicos e Consolida????o das Leis do Trabalho; c) a gest??o de recursos financeiros ?? marcada pela irregularidade no fluxo dos referidos recursos; e d) o controle dos bens p??blicos ocorre de forma fr??gil e o processo de compra est?? sendo realizado sem problemas. Com base nessas considera????es, o documento prop??e algumas sugest??es de aperfei??oamento do modelo OS.

Reforma administrativa e marco legal das organiza????es sociais no Brasil: as d??vidas dos juristas sobre o modelo das organiza????es sociais

O modelo brasileiro das organiza????es sociais representa uma das respostas poss??veis ?? crise do aparelho do Estado no ??mbito da presta????o dos servi??os sociais. Essas entidades s??o percebidas como uma forma de parceria do Estado com as institui????es privadas de fins p??blicos (perspectiva ex parte principe) ou, sob outro ??ngulo, uma forma de participa????o popular na gest??o administrativa (perspectiva ex parte populi). No texto s??o tematizadas as diferen??as e semelhan??as entre o marco legal das organiza????es sociais e das entidades de utilidade p??blica no Brasil, as notas distintivas entre a disciplina dos servi??os privados de interesse p??blico e dos servi??os p??blicos, bem como o que distingue juridicamente o modelo das organiza????es sociais de processos de privatiza????o e terceiriza????o. Em todos esses temas os juristas aparecem como protagonistas na determina????o dos limites do modelo das organiza????es sociais, evidenciando que processos de reforma normativa exigem, para serem eficazes, uma concomitante reforma na mentalidade dos agentes p??blicos.

Reforma judici??ria e democratiza????o na Am??rica Latina

Este texto reflete a necessidade de uma reforma profunda nos sistemas judici??rios nos pa??ses da Am??rica Latina. O autor enumera os mais consider??veis eventos pol??ticos ocorridos na regi??o ap??s a d??cada de 60, principalmente durante o per??odo dos governos militares, com ??nfase nos modelos judici??rios prevalecentes ??? comumente dependentes, manipulados e fr??geis ??? bem como nos problemas enfrentados pelos ju??zes e serventu??rios da justi??a em muitos pa??ses. Ele tamb??m descreve v??rios movimentos pela reforma legal observados em dois diferentes momentos ??? do fim da d??cada de 60 e come??o da de 70, e depois, durante a d??cada de 80, comparando seus sucessos e fracassos e enumerando uma quantidade de seguidores nacionais e internacionais. Finalmente, o leitor deparar-se-?? com uma an??lise das mudan??as econ??micas e pol??ticas que t??m incentivado esta nova preocupa????o por justi??a e pela reforma das institui????es legais, dentre outras, na Am??rica Latina, assim como as dificuldades que esse movimento deve enfrentar no sentido de alcan??ar um Estado descentralizado, eficiente e democr??tico.