Módulo eletrônico de controle para válvulas solenóides

This technical note describes a new and simple electronic circuit for driving solenoid valves. The circuit is based on a single integrated circuit DRV103, which is able to drive resistive or inductive loads up to 1.5 A. Switching of 12-V loads can be controlled by TTLlevel signals in two distinct steps. Initially, 12 V is applied during 110 ms, followed by 4.2 V RMS until the end of the activation TTL pulse. This mode of operation is particularly suitable to drive solenoids, because it requires a higher voltage to start and a lower maintenance voltage. By using this circuit, power consumption and heating are reduced and the solenoid lifetime is enhanced. Moreover, this circuit is specially appropriated to build computercontrolled solenoid valves systems.

Merimies on erimies? Organisaatiositoutuminen suomalaisessa risteilyvarustamossa. Case: Kristina Cruises Oy

Tutkimuksen tavoitteena on selvittää, miten organisaatioon sitoutuminen moniulotteisena käsitteenä ymmärretään yrityksen johtoryhmässä ja avainesimiesten kesken, kun työpaikkana on risteilyvarustamo ja -laiva. Tutkimuksen empiirisen aineiston muodostaa viisi haastattelua laivan palveluosastoilta sekä yrityksen johtoryhmän haastattelut. Teoriaosuudessa on keskitytty kuvailemaan sitoutumiseen vaikuttavia tekijöitä ottaen huomioon kohdeorganisaation toimintaympäristö. Tässä tutkimuksessa organisaatiositoutuminen ymmärretään yksilön henkilökohtaisten tarpeiden, tunnepitoisen kiinnittymisen ja työyhteisön vaikutuksen yhteenliittymänä. Tutkimus on laadullinen ja aineiston keräystapana on käytetty pääasiallisesti teemahaastattelua. Aineistoa on täydennetty muutamalla avoimella sähköpostikyselyllä. Analysointi tapahtui teemoittelun avulla, josta johtopäätöksiin edettiin induktiivisesti. Tutkimustulosten perusteella voidaan todeta, että organisaatiositoutuminen kohdeyrityksessä on ymmärretty lähes samalla tavalla sekä johtoryhmän että esimiesten kesken. Huomioon otettavia aiheita sitouttamista silmällä pitäen ovat yrityksen arvojen ja tavoitteiden merkitys läpi koko sitoutumisprosessin.

Competitive flexibility in systems supplier companies in mechanical engineering industry

Systems suppliers are focal actors in mechanical engineering supply chains, in between general contractors and component suppliers. This research concentrates on the systems suppliers’ competitive flexibility, as a competitive advantage that the systems supplier gains from independence from the competitive forces of the market. The aim is to study the roles that power, dependence relations, social capital, and interorganizational learning have on the competitive flexibility. Research on this particular theme is scarce thus far. The research method applied here is the inductive multiple case study. Interviews from four case companies were used as main source of the qualitative data. The literature review presents previous literature on subcontracting, supply chain flexibility, supply chain relationships, social capital and interorganizational learning. The result of this study are seven propositions and consequently a model on the effects that the dominance of sales of few customers, power of competitors, significance of the manufactured system in the end product, professionalism in procurement and the significance of brand products in the business have on the competitive flexibility. These relationships are moderated by either social capital or interorganizational learning. The main results obtained from this study revolve around social capital and interorganizational learning, which have beneficial effects on systems suppliers’ competitive flexibility, by moderating the effects of other constructs of the model. Further research on this topic should include quantitative research to provide the extent to which the results can be reliably generalized. Also each construct of the model gives possible focus for more thorough research.

International Partner Management in the Software Industry

The purpose of this research is to describe how the scope of internationalization affects partner management in software companies. The effects are analyzed separately for small and large companies. Partner management is described from three perspectives: who should manage partnerships, how they should be managed and how does the context affect the choice of management style. Inductive case study is selected as research design. Eventually four case companies are chosen. The findings reveal that the size of the company affects the volume whereas the scope of internationalization affects the choice of partner management activities. Companies with high scope of internationalization required a more formal yet flexible management system whereas companies with low scope of internationalization relied more on the informal relations and personal management.

TransPromo communication as a part of company’s marketing communications when the e-bill is a medium

The goal of this thesis was to research what TransPromo is, why companies want to implement TransPromo communication, and what the elements of effective Transpromo communication are. Furthermore, the goal was to develop a TransPromo communication strategy and a normative model for TeliaSonera Finland, which depicts the elements of effective TransPromo communication when the electronic bill is a medium. Abductive reasoning was utilized in this thesis, which means that empirical and theoretical worlds are alternating in researcher’s reasoning process. This thesis didn’t rely on any specific theory nor did it utilize any previous theoretical model. However, certain theoretical connections existed so this thesis cannot be considered purely inductive. The empirical part of this thesis was conducted by examining secondary industry data and by conducting specialist interviews at TeliaSonera Finland and Strålfors. Grounded Theory approach was utilized in the analysis of the interview data and content analysis was used in the analysis of secondary industry data. This thesis increases knowledge in the area of TransPromo communication, and provides one definition of TransPromo communication. As a result of this thesis, a TransPromo communication strategy and a normative model for TeliaSonera Finland was built. The model depicts the elements of the effective TransPromo communication when the e-bill is a medium. The TranPromo communication objective is to utilize transaction documents, such as bills, in order to deliver targeted and personalized marketing messages to current customers. The aim is to strengthen the customer relationship, and to enforce up-sell and cross-sell opportunities and cost savings.

Antenna Design for Contactless IC Card Applications

Contactless integrated circuit cards are one form of application of radio frequency identification. They are used in applications such as access control, identification, and payment in public transport. The contactless IC cards are passive which means that both the data and the energy are transferred to the card without contact using inductive coupling. Antenna design and optimization of the design for contactless IC cards defined by ISO/IEC14443 is studied. The basic operation principles of contactless system are presented and the structure of contactless IC card is illustrated. The structure was divided between the contactless chip and the antenna. The operation of the antenna was covered in depth and the parameters affecting to the performance of the antenna were presented. Also the different antenna technologies and connection technologies were provided. The antenna design process with the parameters and the design tools isillustrated and optimization of the design is studied. To make the design process more ideal a target of development was discovered, which was the implementation of test application. The optimization of the antenna design was presented based on the optimization criteria defined in this study. The solution for the implementation of these criteria and the effect of each criterion was found. For enhancing the performance of the antenna a focus for future study was proposed.

Comparison of some properties of Cu(II) 2,3- , 3,5- and 2,6-dimethoxybenzoates

The physico-chemical properties and thermal stability in air of Cu(II) 2,3- , 3,5- and 2,6-dimethoxybenzoates were compared and the influence of the position of -OCH3 substituent on their thermal stability was investigated. The complexes are crystalline, hydrated salts with blue colour. The carboxylate ion is a bidentate chelating or bridging group. The thermal stability of analysed Cu(II) dimethoxybenzoates was studied in the temperature range of 293-1173 K. The positions of methoxy- groups in benzene ring influence the thermal properties of studied complexes. Their different thermal properties are markedly connected with the various influence of inductive, mesomeric and steric effects of -OCH3 substituent on the electron density in benzene ring. The magnetic susceptibilities of the complexes were measured over the range of 76-300 K and the magnetic moments were calculated. The results show that they form dimers.

Magnetic, thermal and spectral properties of Ni(II) 2,3- , 3,5- and 2,6-dimethoxybenzoates

Complexes of Ni(II) 2,3-, 3,5- and 2,6-dimethoxybenzoates have been synthesized, their physico-chemical properties have been compared and the influence of the position of -OCH3 substituent on their properties investigated. The analysed compounds are crystalline, hydrated salts with green colour. The carboxylate ions show a bidentate chelating or bridging coordination modes. The thermal stabilities of Ni(II) dimethoxybenzoates were investigated in air in the range of 293-1173 K. The complexes decompose in three steps, yelding the NiO as the final product of decomposition. Their solubilities in water at 293 K are in the order of 10-2-10-4 mol×dm-3. The magnetic susceptibilities for the analysed dimethoxybenzoates of Ni(II) were measured over the range of 76-303 K and the magnetic moments were calculated. The results reveal that the complexes are the high-spin ones and the ligands form the weak electrostatic field in the octahedral coordination sphere of the central Ni(II) ion. The various position -OCH3 groups in benzene ring cause the different steric, mesomeric and inductive effects on the electron density in benzene ring.

Nursing Ethics Education in Finland from the Perspective of Codes of Ethics

The purpose of this study was to analyze nursing ethics education from the perspective of nurses’ codes of ethics in the basic nursing education programmes in polytechnics in Finland with the following research questions: What is known about nurses’ codes in practice and education, what contents of the codes are taught, what teaching and evaluation methods are used, which demographic variables are associated with the teaching, what is nurse educators’ adequacy of knowledge to teach the codes and nursing students’ knowledge of and ability to apply the codes, and what are participants’ opinions of the need and applicability of the codes, and their importance in nursing ethics education. The aim of the study was to identify strengths and possible problem areas in teaching of the codes and nursing ethics in general. The knowledge gained from this study can be used for developing nursing ethics curricula and teaching of ethics in theory and practice. The data collection was targeted to all polytechnics in Finland providing basic nursing education (i.e. Bachelor of Health Care). The target groups were all nurse educators teaching ethics and all graduating nursing students in the academic year of 2006. A total of 183 educators and 214 students from 24 polytechnics participated. The data was collected using a structured questionnaire with four open-ended questions, designed for this study. The data was analysed by SPSS (14.0) and the open-ended questions by inductive content analysis. Descriptive statistics were used to summarize the data. Inferential statistics were used to estimate the differences between the participant groups. The reliability of the questionnaire was estimated with Cronbach’s coefficient alpha. The literature review revealed that empirical research on the codes was scarce, and minimal in the area of education. Teaching of nurses’ codes themselves and the embedded ethical concepts was extensive, teaching of the functions of the codes and related laws and agreements was moderate, but teaching of the codes of other health care professions was modest. Issues related to the nurse-patient relationship were emphasised. Wider social dimensions of the codes were less emphasized. Educators’ and students’ descriptions of teaching emphasized mainly the same teaching contents, but there were statistically significant differences between the groups in that educators assessed their teaching to be more extensive than what students had perceived it had been. T he use of teaching and evaluation methods was rather narrow and conventional. However, educators’ and students’ descriptions of the used methods differed statistically significantly. Students’ knowledge of the codes and their ability to apply them in practice was assessed as mediocre by educators and by students themselves. Most educators assessed their own knowledge of the codes as adequate to teach the codes, as did most of the students. Educators who regarded their knowledge as adequate taught the codes more extensively than those who assessed their knowledge as less adequate. Also students who assessed their educators’ knowledge as adequate perceived the teaching of the codes to be more extensive. Otherwise educators’ and students’ demographic variables had little association with their descriptions of the teaching. According to the participants, nurses need their own codes, and they are also regarded as applicable in practice. The codes are an important element in nursing ethics education, but their teaching needs development. Further research should focus on the organization of ethics teaching in the curricula, the teaching process, and on the evaluation of the effectiveness of ethics education and on educators’ competence. Also the meaning and functions of the codes at all levels of nursing deserve attention. More versatile use of research methods would be beneficial in gaining new knowledge.

Bayle propose-t-il une histoire de la philosophie?

"Pierre Bayle propose-t-il une histoire de la philosophie?" La question n'est pas destinée à recevoir une réponse simple. Elle est posée afin d'interroger l'entreprise intellectuelle atypique de Bayle, sa manière de convoquer les philosophes et les systèmes philosophiques dans sa propre pensée, de les présenter dans son Dictionnaire historique et critique.

Clinical reasoning of medical students in a public university in Brazil

The aim of this research was to understand the reasoning developed by medical students in a public university in Brazil. This research on education included semi-structured interviews and film recordings of interns discussing 10 clinical cases. A sample of 16 interns analyzed cases presented on a notebook computer with a webcam. They were instructed to verbalize all their thoughts on the procedures they would use. The film recordings and transcripts of the interviews were analyzed. Quantitative data was evaluated using Yates' chi-squared test and speech analysis was used to evaluate the transcripts. The theme worked on in the practice of reasoning was: the student's perceptions of their clinical practice. Of the 160 diagnoses, 57% were done with analytical reasoning and 43% with non-analytical reasoning. The hypothetical deductive method was employed by 31% of the interns and the inductive method was employed by 69%. The diagnostic accuracy was 81% correct for easy cases and 85% correct for difficult cases. We observed two empirical categories: the cognitive universe of the student and the patient's context.

Vuotasapainon hallinta kokosiltasyötetyssä muuntajassa

Keskitaajuudella toimivia muuntajia käytetään laajalti tehoelektroniikkasovelluksissa kuten DC/DC-konverttereissa ja muissa hakkuriteholähteissä. Muuntaja on induktiivinen komponentti, jonka magneettisen tasapainon säilyttäminen hakkuriteholähteissä on laitteen virheettömän toiminnan kannalta tärkeää. Muuntajaa syöttävän virtapiirin on muodostettava symmetrinen syöttöjännite, jotta muuntajan vuo ei ajaudu positiiviseen tai negatiiviseen kyllästykseen. Tässä diplomityössä esitetään muuntajan sähkömagneettinen toimintaperiaate, kyllästymisen syyt hakkuriteholähteissä sekä kehitetään aktiivinen ohjaus vuotasapainon säilyttämiseksi. Hakkuriteholähteissä käytettävissä muuntajissa on monesti useampi kuin kaksi käämiä. Tässä työssä tutkittavassa muuntajassa on useita ensiöitä ja useita toisioita ja muuntajaa syötetään keskitaajuudella. Tämä tuo uusia ongelmia verrattuna perinteiseen yksivaiheiseen DC/DC-konvertteriin. Näihin ongelmiin esitetään ratkaisut diplomityön tutkimuksessa.

Dieselmoottorin analogisen kierrosnopeusmittauksen digitalisointi

Työssä suunnitellaan kierrosnopeusmittauksen toteutus vanhaan Ford -teollisuusdieseliin käyttäen moottorin alkuperäistä kierrosnopeusanturia. Anturi kunnostetaan vaihtamalla vanha, palanut käämi uuteen digitaaliseen järjestelmään soveltuvaan käämiin. Sen toimin-ta halutulla kierrosnopeusalueella varmistetaan mittauksin ja tämän perusteella suunnitel-laan kytkentä sen liittämiseksi kierrosnopeuden laskevaan mikrokontrolleriin. Kytkennän toimivuutta testataan simuloimalla ennen prototyypin rakentamista. Erilaisia vaihtoehtoja analogisen näytön toteuttamiseksi tutkitaan ja niistä valitaan yksi ve-nekäyttöön soveltuva, joka toteutetaan järjestelmän näyttöratkaisuksi. Järjestelmälle suunnitellaan piirilevy, jolle prototyyppi kasataan. Mikrokontrollerille koodataan C -ohjelmointikielellä ohjelma, joka laskee dieselmoottorin kierrosnopeuden anturipulssien perusteella ja ohjaa näyttöä.

Viestitaktiikan kehittyminen yhtymän viestijärjestelmän käyttöönoton jälkeen

Tutkimus käynnistyi Maanpuolustuskorkeakoulun taktiikan laitoksen esittäessä aihepiiriä tutkittavaksi. Tutkimuksen tavoitteena on ollut lisätä tietämystä viestitaktiikan kehittymisestä yhtymän viestijärjestelmän käyttöönoton jälkeen 1980 – 2000-luvuilla osana operatiivistaktisten toimintaperiaatteiden ja -tapojen kehittymistä. Tutkimuksella on pyritty syventämään tietämystä taktisten periaatteiden muutoksista viestitaktiikan näkökulmasta. Tutkimuksessa tarkasteltiin maavoimien YVI-järjestelmillä varustettujen yhtymien viestitaktiikkaa sekä niissä tapahtuneita muutoksia. Muutoksia tarkasteltaessa tutkimuksessa keskityttiin käsitykseen viestitaktiikasta, viestitaktisiin periaatteisiin sekä viestipäällikköön ja hänen toimintakenttäänsä. Viestitaktisia periaatteita ja niissä tapahtuneita muutoksia vertailtiin myös yleisiin taktisiin periaatteisiin ja niiden painotuksissa tapahtuneisiin muutoksiin. Tutkimus on luonteeltaan kvalitatiivinen. Tutkimusongelmia lähestyttiin fenomenografisella tutkimusotteella, jossa tavoitteena on kuvailla, analysoida ja ymmärtää erilaisia käsityksiä ilmiöistä sekä käsitysten keskinäisistä suhteista. Lähdeaineiston muodostivat 18 viestitaktiikan asiantuntijan kokemusperäiset käsitykset viestitaktiikasta ja sen kehittymisestä YVIjärjestelmien käyttöönoton jälkeen. Käsityksistä muodostettiin merkitys- ja kuvauskategorioiden sekä tutkijan esiymmärryksen pohjalta induktiivisen päättelyn avulla tutkimuksen varsinaiset johtopäätökset. Tutkimushenkilöiden käsitysten sekä taktiikan ja viestitaktiikan aikaisempien määritelmien perusteella johtopäätöksenä määritettiin, että viestitaktiikka on tehtävän toteuttamiseen käytettävissä olevan viestillisen kapasiteetin optimaalista suunnittelua, soveltamista ja käyttöä viestivoimana haluttujen päämäärien saavuttamiseksi ja viestitaisteluiden voittamiseksi. Viestitaktikointi edellyttää viestitaisteluun liittyvien keinojen tuntemista sekä taitoa soveltaa niitä käytännössä. Tutkimustulosten perusteella keskeisiksi viestitaktisiksi periaatteiksi tärkeysjärjestyksessä muodostuivat - päämäärän ja tehtävän selkeys - varautuminen odottamattomiin tilanteen vaihteluihin - yksinkertaisuus - aktiivisuus ja oma-aloitteisuus. Keskeisiksi merkitystään lisänneiksi viestitaktisiksi periaatteiksi muodostuivat - voimien vaikutuksen keskittäminen - joukkojen ja voimien jakaminen (reservi) - varautuminen odottamattomiin tilanteen vaihteluihin - salaaminen ja harhauttaminen - turvallisuus. Selkeimpänä viestipäällikön tehtävien muutoksena pidettiin siirtymistä yksityiskohtaisesta viestiyhteyksien suunnittelijasta kokonaisvaltaiseksi yhtymän viestitoiminnan johtajaksi. Tutkimustulosten ja aikaisempien määritelmien perusteella johtopäätöksenä määritettiin, että viestipäällikkö johtaa yhtymän viestitoimintaa komentajan antamien vaatimusten mukaisesti ja vastaa yhtymän johtoryhmän jäsenenä viestitaktisista ratkaisuista haluttujen päämäärien saavuttamiseksi ja viestitaisteluiden voittamiseksi. Viestipäälliköltä edellytetään viestitaisteluun liittyvien keinojen tuntemista sekä taitoa soveltaa niitä käytännössä. Tutkimuksen mukaan yhtymän viestitaktiikkaan merkittävimmin vaikuttaneita tekijöitä olivat yhtymän viestijärjestelmien käyttöönotto, uusien esikunta- ja viestiyksiköiden kehittäminen, kiinteän viestiverkon ja johtamisjärjestelmäalan merkityksen kasvaminen, käytettävien tekniikoiden kehittyminen sekä joukkojen ja johtoportaiden tiedonsiirtotarpeiden kasvaminen. Viestitaktiikan osalta voidaan todeta deterministisen näkemyksen taistelusta ja taistelutilasta muuttuneen yleisten taktisten periaatteiden muutosten mukaisesti aikaisempaa monimuotoisempaan ja rohkeampaan, voluntaarisempaan, suuntaan.

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.