Development of human visual system analysis for the implementation of a new instrument for flicker measurement

Flicker is a power quality phenomenon that applies to cycle instability of light intensity resulting from supply voltage fluctuation, which, in turn can be caused by disturbances introduced during power generation, transmission or distribution. The standard EN 61000-4-15 which has been recently adopted also by the IEEE as IEEE Standard 1453 relies on the analysis of the supply voltage which is processed according to a suitable model of the lamp – human eye – brain chain. As for the lamp, an incandescent 60 W, 230 V, 50 Hz source is assumed. As far as the human eye – brain model is concerned, it is represented by the so-called flicker curve. Such a curve was determined several years ago by statistically analyzing the results of tests where people were subjected to flicker with different combinations of magnitude and frequency. The limitations of this standard approach to flicker evaluation are essentially two. First, the provided index of annoyance Pst can be related to an actual tiredness of the human visual system only if such an incandescent lamp is used. Moreover, the implemented response to flicker is “subjective” given that it relies on the people answers about their feelings. In the last 15 years, many scientific contributions have tackled these issues by investigating the possibility to develop a novel model of the eye-brain response to flicker and overcome the strict dependence of the standard on the kind of the light source. In this light of fact, this thesis is aimed at presenting an important contribution for a new Flickermeter. An improved visual system model using a physiological parameter that is the mean value of the pupil diameter, has been presented, thus allowing to get a more “objective” representation of the response to flicker. The system used to both generate flicker and measure the pupil diameter has been illustrated along with all the results of several experiments performed on the volunteers. The intent has been to demonstrate that the measurement of that geometrical parameter can give reliable information about the feeling of the human visual system to light flicker.

Synthesis and characterization of novel poly(imino ketone)s via palladium-catalyzed aryl amination

The challenge of the present work was to synthesize and to characterize new classes of N-containing polymers via palladium-catalyzed aryl amination. This work was inspired by a desire to combine the properties of high-performance polymers such as PEKs with those of N-containing conductive polymers such as polyaniline (PANI), poly(aromatic amides) (PAAs), and the ready synthesis of N-containing simple aromatic compound by the Buchwald-Hartwig reaction. Careful investigation of a model reaction was carried out to provide insights into the formation of side products which will have a negative effect upon the molecular weight or upon the materials properties of the desired polymers in the polycondensation reaction. In this thesis, five new different polymer classes namely, poly(imino ketone)s (PIKs), poly(imino acridine)s (PIAcs), poly(imino azobenzene)s (PIAzos), poly(imino fluorenone)s (PIFOs), and poly(imino carbazole)s (PICs) were synthesized and fully characterized by means of 1H-NMR, elemental analysis, UV, FT-IR, X-ray, GPC, TGA, DSC, DMA, and dielectric spectroscopy. To optimize the polycondensation process, the influence of the concentration, temperature, ligands and the reactivity of the halogen containing monomers were investigated. A temperature of 100-165 °C and a concentration of 30-36 % were found to be optimal for the palladium-catalyzed polycondensation to produce polymer with high molecular weight (Mn = 85 900, Mw = 474 500, DP = 126). Four different ligands were used successfully in the Pd-catalyzed process, of which the Pd/BINAP system was found to be the most effective catalyst, producing the highest yield and highest molecular weight polymers. It was found that the reactivity decreases strongly with increasing electronegativity of the halogen atoms, for example better yields, and higher molecular weights were obtained by using dibromo compounds than dichloro compounds while difluoro compounds were totally unreactive. Polymer analogous transformations, such as the protonation reaction of the ring nitrogens in PIAcs, or of the azobenzene groups of PIAzos, the photo and thermal cis-trans-isomerization of PIAzos, and of poly(imino alcohol)s were also studied. The values of the dielectric constants of PIKs at 1 MHz were in the range 2.71-3.08. These low values of the dielectric constant are lower than that of "H Film", a polyimide Kapton film which is one of the most preferred high-performance dielectrics in microelectronic applications having a dielectric constant of 3.5. In addition to the low values of the dielectric constants, PIKs have lower and glass transition temperatures (Tgs) than arimides such as Kapton which may make them more easily processable. Cyclic voltammetry showed that PICs exhibited low oxidation and reduction potentials and their values were shifted to low values with increasing degree of polymerization i.e. with increasing of the carbazole content in backbone of PICs (PIC-7, 0.44, 0.33 V, DP= 37, PIC-5, 0.63, 0.46, DP= 16, respectively).

Asymmetrische Synthese von 2-substituierten N-Galactosyl-piperidinderivaten und deren Verwendung zum Aufbau bicyclischer Heterocyclen

Ziel dieser Arbeit war es, ausgehend von auxiliargebundenen Piperidinderivaten, unterschiedliche chirale bi- und tricyclische Verbindungen darzustellen. Dazu wurde das 2,3,4,6-Tetra-O-pivaloyl--D-galactosylamin durch Kondensation mit Aldehyden in die entsprechenden Galactosylaldimine überführt, die in einer Lewissäure-katalysierten hochdiastereoselektiven Tandem-Mannich-Michael-Reaktionssequenz mit Danishefsky-Dien zu 2-substituierten Dehydropiperidinonen umgesetzt wurden. Die auf diese Weise zugänglichen chiralen Heterocyclen wurden diastereoselektiv in trans-konfigurierte 5-Bromverbindungen überführt. In einer Thiazolsynthese nach Hantzsch konnten die -Bromketone mit ambidenten Nukleophilen, wie Thiobenzamiden und unsymmetrischen Thioharnstoffderivaten, in niedrigen Ausbeuten zu bicyclischen Tetrahydro-thiazolo[5,4-c]pyridinen umgesetzt werden. Weitere bicyclische Heterocyclen mit einem Tetrahydro-thieno[2,3-c]pyridin-System konnten durch eine Gewald-Cyclisierung an 2-substituierten N-Galactosyl-piperidinonen erhalten werden. Durch Palladium-katalysierte Kreuzkupplungen an heterocyclischen Enoltriflaten, die ausgehend von den N-Galactosyl-dehydropiperidinonen synthetisiert wurden, gelang die Einführung von Aryl-, Alkinyl- und Alkenylsubstituenten in 4-Position des Piperidinringes. Zur Freisetzung der 2,4-disubstituierten Dehydropiperidinen wurde die N-glycosidische Bindung im sauren Milieu gespalten. Verbindungen mit einer exocyclischen Doppelbindung wurden einer Diels-Alder-Reaktion mit N-Phenylmaleinimid zum Aufbau von Isochinolinderivaten eingesetzt. Des Weiteren gelang die Synthese von 2-benzylsubstituierten N-Galactosyl-dehydropiperidinonen, wobei ortho-halogensubstituierte Phenylacetaldehyde eingesetzt wurden. Die in hohen Diastereomerenüberschüssen gebildeten Dehydropiperidinone wurden in die entsprechenden Enoltriflate überführt und einer Domino-Suzuki-Heck-Reaktion unterworfen. In dieser Kaskadenreaktion konnten tricyclische diastereomerenreine Benzomorphanderivate synthetisiert werden.

Synthese und Photochemie von Dendrimeren mit stilbenoiden Chromophoren

Dendrimere spielen als strukturtreue Nanopartikel eine herausragende Rolle. Ziel dieser Arbeit war, Dendrimere mit einer hohen Dichte an photoaktiven Chromophoren herzu-stellen und zu untersuchen. Dazu wurden die terminalen Aminogruppen von Poly(propylenimin)dendrimeren 1. und 2. Generation, Astramol DAB-Am-4R und DAB-Am-8R, mit Stilbenen und Styrylstilbenen als Chromophor verknüpft. Mittels Wittig-Horner- und Heck-Reaktion wurden (E)-Stilbene aufgebaut, die auf der einen Seite drei Propoxygruppen zur Verbesserung der Löslichkeit und auf der anderen Seite eine passende Funktionalität zur Verknüpfung mit dem dendritischen Core tragen. Als Verknüpfungsmethoden wurden die Verknüpfung als Amid (PSDA), Schiffsche Base (PSDS) und Harnstoff (PSDH) getestet. Die Schiffschen Basen wurden außerdem zur Erhöhung der Hydrolysestabilität zum sekundären Amin reduziert (PSDR und PQDR). Durch die Verknüpfung mit dem Core werden die stilbenoiden Chromophore sehr stark photoaktiviert. Das beruht auf einem Singulett-Energietransfer (Förster-Mechanismus) von Chromophor zu Chromophor. Dieser Prozeß konkurriert zu den Deaktivierungsprozessen, verlängert die mittlere S1-Lebensdauer und erhöht somit die Chancen der Photochemie. Der Styrylstilben-Chromophor hat darüber hinaus einen erheblichen Teil seiner UV-Absorbtion bereits im Tageslicht und photopolymerisiert daher bereits im Tageslicht. Vor allem bei den Dendrimeren 2. Generation stellte sich die Frage nach der vollständigen, d.h. achtfachen Umsetzung; das Core sollte als Knäuel vorliegen, die Arme zum Teil nach innen gefaltet und somit dem Reaktand nur bedingt zugänglich. Auch dort konnten unter optimierten Reaktionsbedingungen alle Aminogruppen umgesetzt werden. Die vollständige Umsetzung der Dendrimere wurde mittels NMR und massenspektroskopischen Methoden untersucht. Bei den Absorptionsspektren der Dendrimere 1. Generation ändert sich die Lage der Maxima je nach Art der Verknüpfung der Chromophore mit dem Core. Die Verlängerung des Chromophors um eine Styryleinheit bedingt eine beträchtliche Rotverschiebung. Die Lage der Emissionsmaxima differiert stärker als die Lage der Absorptionsmaxima. Den geringsten Stokes-Shift weist der Harnstoff auf, dann folgt das sekundäre Amin, dann die Schiffsche Base. Dies weist auf unterschiedlich relaxierte S1-Geometrien hin. Die Verbindungen PSDS1, PSDR1 und PSDH1 aus 3,4,5-Tripropoxystilbeneinheit und Astramol-Core 1. Generation DAB-Am-4 wurden in einer Konzentration von 10-5 mol/L belichtet. Der vollständige Photoabbau durch Belichtung in Chloroform mit einer Xenon-Lampe erfolgte ohne jeglichen Filter innerhalb von zehn Minuten (PSDH1), 20 Minuten (PSDR1) und einer Stunde (PSDS1). Allen drei Verbindungen gemeinsam ist das Entstehen eines intermediären neuen Maximums geringer Intensität, das um etwa 100 nm bathochrom verschoben ist. Das Harnstoffsystem weist außerdem ein weiteres intermediäres Maximum bei 614 nm auf. Diese Maxima können (laut früherer Untersuchungen) durch Oxidation entstandenen chinoiden Strukturen zugeordnet werden, deren Lebensdauer (im Sekundenbereich) zu kurz für eine NMR-Charakterisierung ist. PSDR1 wurde außerdem bei höheren Konzentrationen (10-4 und 10-3 mol/L) mit einer Quecksilberlampe mit Pyrex-Filter (lambda > 300 nm) belichtet. Dabei wird, wie erwartet, eine Verbreiterung der NMR-Signale beobachtet. Es bildet sich zunächst cis-Stilben. Außerdem läßt sich bei 4.3 ppm ein Signal beobachten, das von inter- oder intramolekular gebildeten Methinprotonen herrührt. Auch wenn laut MOPAC- und Kraftfeldrechnung die Doppelbindungen ungünstig für eine [pi2s + pi2s]-Cyclodimerisierung zueinander stehen, kann im photochemisch angeregten Zustand eine Geometrie vorherrschen, die die intramolekulare Kopf-Kopf-Cyclobutanbildung ermöglicht. Die massenspektrometrischen Untersuchungen der Belichtungsprodukte (FD, ESI, MALDI-TOF) zeigen als höchste Masse lediglich das Monomer. Allerdings kann dadurch nicht auf eine rein intramolekulare Reaktion geschlossen werden. Die fortschreitende statistische CC-Verknüpfung kann schnell zu vernetzten Nanopartikeln führen, die im Massenspektrometer nicht fliegen. Die NMR-Spektren der mit zunehmender Vernetzung immer schlechter löslich werdenden Teilchen belegen die Oligomerisierung.

Biogenic emission of halocarbons

Within this doctoral thesis, biogenic emissions of several globally relevant halocarbons (methyl chloride, methyl bromide, methyl iodide, dibromomethane, chloroform and bromoform) have been investigated in different environments. An airborne study was focused on the tropical rainforest ecosystem, while shipborne measurements investigated naturally occurring oceanic plankton blooms. Laboratory experiments using dried plant material were made to elucidate abiotic production mechanisms occurring in organic matter. Airborne measurements over the tropical rainforest of Suriname and French Guyana (3 - 6 °N, 51 - 59 °W) revealed net fluxes of 9.5 (± 3.8 2σ) µg m-2 h-1 methyl chloride and 0.35 (± 0.15 2σ) µg m-2 h-1 chloroform emitted in the long dry season (October) 2005. An extrapolation of these numbers to all tropical forests helped to narrow down the range of the recently discovered and poorly quantified methyl chloride source from tropical ecosystems. The value for methyl chloride obtained (1.5 (± 0.6 2σ) Tg yr-1) affirms that the contribution of the tropical forest ecosystem is the major source in the global budget of methyl chloride. The extrapolated global net chloroform flux from tropical forests (56 (± 23 2σ) Gg yr-1) is of minor importance (5 - 10 %) compared to the global sources. A source of methyl bromide from this region could not be verified. The abiotic formation of methyl chloride and methyl bromide from dead plant material was tested in a laboratory study. The release from plant tissue representative of grassland, deciduous forest, agricultural areas and coastal salt marshes (hay, ash, tomato and saltwort) has been monitored. Incubations at different temperatures (25 - 50 °C) revealed significant emissions even at ambient temperature, and that the emissions increased exponentially with temperature. The strength of the emission was found to be additionally dependent on the availability of halide and the methoxyl group within the plant tissue. However, high water content in the plant material was found to inhibit methyl halide emissions. The abiotic nature of the reaction yielding methyl halides was confirmed by its high activation energy calculated via Arrhenius plots. Shipborne measurements of the atmospheric mixing ratios of methyl chloride, methyl bromide, methyl iodide, dibromomethane and bromoform have been conducted along a South Atlantic transect from the 27.01. - 05.02.2007 to characterize halocarbon emissions from a large-scale natural algae bloom encountered off the coast of Argentina. Mixing ratios of methyl chloride and methyl bromide were not significantly affected by the occurrence of the phytoplankton bloom. Emissions of methyl iodide, dibromomethane and bromoform showed pronounced mixing ratio variations, triggered by phytoplankton abundance. Methyl iodide was strongly correlated with dimethyl sulfide throughout the sampled region. A new technique combining satellite derived biomass marker (chlorophyll a) data with back trajectory analysis was successfully used to attribute variations in mixing ratios to air masses, which recently passed over areas of enhanced biological production.

Simulatore d’alba come possibile contromisura al social jetlag in adolescenza

L’obiettivo del presente progetto di ricerca era determinare se l’utilizzo non clinico del simulatore d’alba (un dispositivo che emette luce in graduale aumento prima del risveglio), basato su specifiche conoscenze cronobiologiche, potesse ridurre alcune delle conseguenze del social jetlag, in studenti di scuola secondaria di secondo grado. A tal fine, sono stati valutati gli effetti del simulatore d’alba su tono dell’umore (valutato soggettivamente tramite la Global and Vigor Affect Scale-GVA), livelli di attivazione (valutati soggettivamente tramite la GVA), qualità/quantità di sonno (valutate oggettivamente e soggettivamente tramite attigrafia e Mini Sleep Questionnaire-MSQ), architettura del sonno (valutata oggettivamente tramite Zeo®) ed efficienza dei tre network attentivi (alerting, orienting ed executive), valutata oggettivamente tramite l’Attention Network Test (ANT). In totale, hanno preso parte alla ricerca 56 adolescenti (24 femmine e 32 maschi), frequentanti due istituti di scuola secondaria di secondo grado nella città di Cesena, la cui età media era di 17.68 anni (range d’età 15-20 anni). Ad ogni studente è stata richiesta una partecipazione di 5 settimane consecutive ed il disegno di ricerca prevedeva 3 condizioni sperimentali: baseline, simulatore d’alba e controllo. All’MSQ, in seguito all’utilizzo del simulatore d’alba, sono state osservate una minore percezione di sonnolenza diurna, una frequenza inferiore di risvegli notturni ed una riduzione del numero di partecipanti che presentavano una cattiva qualità della veglia. All’ANT, è stato documentato un significativo miglioramento dell’efficienza del network attentivo dell’alerting, successivo all’impiego del simulatore d’alba, dovuto ad una maggiore reattività dei partecipanti in seguito alla comparsa del double cue, che anticipava la presentazione del target (freccia centrale di cui i partecipanti dovevano giudicare la direzione). Tali risultati convergono nell’evidenziare la capacità del simulatore d’alba di esercitare un effetto attivante/stimolante, mostrando dunque come esso possa essere considerato uno strumento potenzialmente utilizzabile quale contromisura al social jetlag in adolescenza.

The impact of ice crystals on radiative forcing and remote sensing of arctic boundary-layer mixed-phase clouds

This PhD thesis is embedded into the Arctic Study of Tropospheric Aerosol, Clouds and Radiation (ASTAR) and investigates the radiative transfer through Arctic boundary-layer mixed-phase (ABM) clouds. For this purpose airborne spectral solar radiation measurements and simulations of the solar and thermal infrared radiative transfer have been performed. This work reports on measurements with the Spectral Modular Airborne Radiation measurement sysTem (SMART-Albedometer) conducted in the framework of ASTAR in April 2007 close to Svalbard. For ASTAR the SMART-Albedometer was extended to measure spectral radiance. The development and calibration of the radiance measurements are described in this work. In combination with in situ measurements of cloud particle properties provided by the Laboratoire de M¶et¶eorologie Physique (LaMP) and simultaneous airborne lidar measurements by the Alfred Wegener Institute for Polar and Marine Research (AWI) ABM clouds were sampled. The SMART-Albedometer measurements were used to retrieve the cloud thermodynamic phase by three different approaches. A comparison of these results with the in situ and lidar measurements is presented in two case studies. Beside the dominating mixed-phase clouds pure ice clouds were found in cloud gaps and at the edge of a large cloud field. Furthermore the vertical distribution of ice crystals within ABM clouds was investigated. It was found that ice crystals at cloud top are necessary to describe the observed SMART-Albedometer measurements. The impact of ice crystals on the radiative forcing of ABM clouds is in vestigated by extensive radiative transfer simulations. The solar and net radiative forcing was found to depend on the ice crystal size, shape and the mixing ratio of ice crystals and liquid water droplets.

Studies of pure rotational spectra of isolated molecules and molecular adducts using pulsed jet Fourier transform microwave (PJ-FTM) spectroscopy

This thesis focuses on studying molecular structure and internal dynamics by using pulsed jet Fourier transform microwave (PJ-FTMW) spectroscopy combined with theoretical calculations. Several kinds of interesting chemical problems are investigated by analyzing the MW spectra of the corresponding molecular systems. First, the general aspects of rotational spectroscopy are summarized, and then the basic theory on molecular rotation and experimental method are described briefly. ab initio and density function theory (DFT) calculations that used in this thesis to assist the assignment of rotational spectrum are also included. From chapter 3 to chapter 8, several molecular systems concerning different kind of general chemical problems are presented. In chapter 3, the conformation and internal motions of dimethyl sulfate are reported. The internal rotations of the two methyl groups split each rotational transition into several components line, allowing for the determination of accurate values of the V3 barrier height to internal rotation and of the orientation of the methyl groups with respect to the principal axis system. In chapter 4 and 5, the results concerning two kinds of carboxylic acid bi-molecules, formed via two strong hydrogen bonds, are presented. This kind of adduct is interesting also because a double proton transfer can easily take place, connecting either two equivalent or two non-equivalent molecular conformations. Chapter 6 concerns a medium strong hydrogen bonded molecular complex of alcohol with ether. The dimer of ethanol-dimethylether was chosen as the model system for this purpose. Chapter 7 focuses on weak halogen…H hydrogen bond interaction. The nature of O-H…F and C-H…Cl interaction has been discussed through analyzing the rotational spectra of CH3CHClF/H2O. In chapter 8, two molecular complexes concerning the halogen bond interaction are presented.

Reaktivität von Dihypersilylhalogenorganylplumbanen

Organylhalogenide RX reagieren formal gemäß einer oxidativen 1,1-Addition mit Dihypersilylplumbylen) PbHyp2 zu Dihypersilyl-halogenorganylplumbanen PbHyp2RX. Diese Umsetzung gelingt mit nahezu allen untersuchten Organylresten, lediglich beispielsweise der Mesitylrest erweist sich als zu sperrig (R = Me, Et, nPr, iPr, tBu, Hx, cHx, Ad, Ph, C6F5, oTo, mTo, pTo, Naph, Anthr).rnrnFür einige Halogenorganyle wird eine analoge Addition auch an das zinnhomologe Dihypersilylstannylen beschrieben.rnrnDie untersuchten Addukte sind thermisch und gegenüber UV-Strahlung, Sauerstoff und Wasser deutlich weniger empfindlich als vergleichbare andere blei- und zinnorganische Verbindungen.rnrnUmfangreiche NMR-Datensätze beschreiben eine markante Hoch-feldverschiebung der Hypersilylprotonen beim Übergang von PbHyp2 hin zu PbHyp2RX, die für Arylreste stärker ausfällt als für Alkylreste.rnrnEin Großteil der Addukte wurde einkristallin erhalten und wird anhand der röntgendiffraktometrisch ermittelten Strukturparameter detailliert charakterisiert. rnrnEs finden sich gegenüber dem idealen Tetraderwinkel auffällig stark aufgeweitete Si Pb Si-Winkel von 130-143°, während die anderen Winkel mehrheitlich unter dem theoretischen Idealwert bleiben (Si Pb X: 94 103°; Si Pb C: 98-112°; C Pb X: 95-103°). Insbesondere größere, weichere Reste und planare Arylplumbane rücken näher an das Halogen heran.rnDie insgesamt recht hohen Blei-Halogen-Abstände nehmen von den Chloriden hin zu den Iodiden zu. Die Iodoplumbane zeigen dabei generell die kleinsten Pb Si und die größten Pb C Abstände. Alkylplumbane weisen längere Pb C Bindungen auf als ansonsten vergleichbare Arylplumbane.rnrnViele der gefundenen Molekülstrukturen zeigen Anzeichen hoher sterischer Spannung in Form von Substituentenverzerrungen. rnrnDie Bildungsgeschwindigkeit der Addukte ist auch bei tiefen Temperaturen hoch. Sie nimmt von X = Cl über Br hin zu I zu und ist für Alkylreste höher als für Aryle. Die Zerfallsgeschwindigkeiten verhalten sich genau entgegengesetzt. Bei den Thermolysen wird regelmäßig Hypersilylhalogenid eliminiert. Dabei entstehen in Abwesenheit koordinierender Solventien Dihypersilyl-diorganylplumbane PbHyp2R2.rnAndere, unbekannte Zerfallskanäle führen zu unerwarteten Produkten, wie dem Iodonium-verbrückten, cyclischen Tetraplumbetan Pb4I(C6F5)Hyp3.rnrnIn Anwesenheit von Lewis-Basen hingegen können sich hetero-leptische Plumbylene bilden, wie am Beispiel eines Bitolyldiylbisplumbylens gezeigt wird. Dieses zeigt auch, dass prinzipiell eine zweifache Addition von Dihalogenorganylen an zwei Äqui-valente Dihypersilylplumbylen möglich ist. Entsprechende Untersuchungen beschäftigen sich ausführlich mit dafür geeigneten und ungeeigneten Organdiylresten.rnrnUnter günstigen reduktiven Bedingungen lassen sich mittels Metal-lierungsreagenz aus den Dihypersilylhalogenorganylplumbanen unter Halogenidentzug Plumbanide erhalten, die in Form getrennter Ionenpaare isolierbar sind. Diese lassen sich in Ana-logie zu den zuvor beschriebenen Plumbanen ebenfalls als Addukt aus Dihypersilylplumbylen und Lithiumorganylen darstellen.rnrnUnter geeigneten speziellen Bedingungen sind neben metallierten auch formal hydridierte Halogenplumbanide zugänglich.rnrnEntsprechend einer geringen Hybridisierung am zentralen Blei-atom, also eines hohen p-AO-Charakters der bindenden Molekülorbitale und s-AO-Charakters des LEP-Orbitals ergeben sich keine trigonal-planaren, sondern Strukturen mit Substituenten-winkeln sogar nahe bei 90°. Die Bindungslängen zum Blei sind deutlich größere als bei den entsprechenden Halogenplumbanen.rnrnEin besonderes Augenmerk der Arbeit liegt auf der Betrachtung von langlebigen und persistenten heteroleptischen Plumbyl-Radikalen, die durch milde Oxidation mittels PbNsi23) aus den Dihypersilylorganylplumbaniden erhalten werden. Während bislang nur homoleptische Vertreter bekannt waren, die aufgrund des sterischen Anspruchs der Substituenten und aufgrund von Hyperkonjugation von axialsymmetrischer nahezu planarer Geometrie sind, findet sich für die heteroleptischen Plumbyle dieser Arbeit eine stärker pyramidale Geometrie. Ausführlich diskutierte EPR-Experimente liefern Spektren, die gut mit Simulationen für die entsprechenden Radikale übereinstimmen.rnrnDie im Zentrum der Betrachtungen dieser Arbeit stehenden Dihypersilylhalogenorganylplumbane stellen somit einen aussichtsreichen und darüber hinaus persistenten und gut zu handhabenden Ausgangspunkt bei der Darstellung neuartiger und interessanter Spezies dar.

Un sistema location-based per la mappatura degli access point

Trattasi di un sistema basato sulla mappatura degli access point utilizzabile su un'applicazione per smartphone con piattaforma Android. Sono stati usati ambienti di lavoro come Eclipse, affiancato da Lamp e API, utili per visualizzare le mappe da Google Maps. E' stato creato un database online, in modo tale che gli utenti possano condividere le proprie registrazioni (solo quelle che non richiedono una password e quindi utilizzabili da tutti). Il tutto testato tramite un emulatore Android

Progettazione e collaudo di un ballast elettronico per lampade a scarica hid

Nell'elaborato svolto viene presentato un ballast elettronico destinato ad applicazioni di illuminazione stradale. L'alimentatore deve sostituire il tradizionale reattore elettromagnetico attualmente montato sui lampioni, deve poter alimentare lampade HID fino a 150 W, deve soddisfare le più stringenti normative di futura approvazione, deve garantire ulteriori servizi aggiuntivi legati sia al migliore sfruttamento della lampada che a eventuali esigenze legate all'innovativo concetto di palo intelligente (alimentazioni ausiliarie e strategie di risparmio energetico).

Non-Covalent Interaction: Revealed by Rotational Spectroscopy

The pulsed jet Fourier transform microwave spectroscopy have been applied to several molecular complexes involving H2O, freons, methane, carboxylic acids, and rare gas. The obtained results showcase the suitability of this technique for studying the intermolecular interactions. The rotational spectra of three water adducts of halogenated organic molecules, i.e. chlorotrifluoroethylene, isoflurane and alfa,alfa,alfa,-trifluoroanisole, have been investigated. It has been found that, the halogenation of the partner molecules definitely changes the way in which water will link to the partner molecule. Quadrupole hyperfine structures and/or the tunneling splittings have been observed in the rotational spectra of difluoromethane-dichloromethane, chlorotrifluorometane-fluoromethane, difluoromethane-formaldehyde and trifluoromethane-benzene. These features have been useful to describe their intermolecular interactions (weak hydrogen bonds or halogen bonds), and to size the potential energy surfaces of their internal motions. The rotational spectrum of pyridine-methane pointed out that methane prefers to locate above the ring and link to pyridine through a C-H•••π weak hydrogen bond, rather than the C-H•••n interaction. This behavior, typical of complexes of pyridine with rare gases, suggests classifying CH4, in relation to its ability to form molecular complexes with aromatic molecules, as a pseudo rare gas. The conformational equilibria of three bi-molecules of carboxylic acids, acrylic acid-trifluoroacetic acid, difluoroacetic acid-formic acid and acrylic acid-fluoroacetic acid have been studied. The increase of the hydrogen bond length upon H→D isotopic substitution (Ubbelohde effect) has been deduced from the elongation of the carboxylic carbons C•••C distance. The van der Waals complex tetrahydrofuran-krypton shows that the systematic doubling of the rotational lines has been attributed to the residual pseudo-rotation of tetrahydrofuran in the complex, based on the values of the Coriolis coupling constants, and on the type (mu_b) of the interstate transitions.

Elemetary processes of radiation damage in organic molecules of biological interest

It was observed in the ‘80s that the radiation damage on biological systems strongly depends on processes occurring at the microscopic level, involving the elementary constituents of biological cells. Since then, lot of attention has been paid to study elementary processes of photo- and ion-chemistry of isolated organic molecule of biological interest. This work fits in this framework and aims to study the radiation damage mechanisms induced by different types of radiations on simple halogenated biomolecules used as radiosensitizers in radiotherapy. The research is focused on the photofragmentation of halogenated pyrimidine molecules (5Br-pyrimidine, 2Br-pyrimidine and 2Cl-pyrimidine) in the VUV range and on the 12C4+ ion-impact fragmentation of the 5Br-uracil and its homogeneous and hydrated clusters. Although halogen substituted pyrimidines have similar structure to the pyrimidine molecule, their photodissociation dynamics is quite different. These targets have been chosen with the purpose of investigating the effect of the specific halogen atom and site of halogenation on the fragmentation dynamics. Theoretical and experimental studies have highlighted that the site of halogenation and the type of halogen atom, lead either to the preferential breaking of the pyrimidinic ring or to the release of halogen/hydrogen radicals. The two processes can subsequently trigger different mechanisms of biological damage. To understand the effect of the environment on the fragmentation dynamic of the single molecule, the ion-induced fragmentation of homogenous and hydrated clusters of 5Br-uracil have been studied and compared to similar studies on the isolated molecule. The results show that the “protective effect” of the environment on the single molecule hold in the homogeneous clusters, but not in the hydrated clusters, where several hydrated fragments have been observed. This indicates that the presence of water molecules can inhibit some fragmentation channels and promote the keto-enol tautomerization, which is very important in the mutagenesis of the DNA.

Crystal Engineering of bright luminescent copper iodide clusters with phosphorus and nitrogen-based ligands

Copper(I) halide clusters are recently considered as good candidate for optoelectronic devices such as OLEDs . Although the copper halide clusters, in particular copper iodide, are very well known since the beginning of the 20th century, only in the late ‘70s the interest on these compounds grew dramatically due their particular photophysical behaviour. These complexes are characterized by a dual triplet emission bands, named Cluster Centred (3CC) and Halogen-to-Ligand charge transfer (3XLCT), the intensities of which are strictly related with the temperature. The CC transition, due to the presence of a metallophylic interactions, is prevalent at ambient temperature while the XLCT transition, located preferentially on the ligand part, became more prominent at low temperature. Since these pioneering works, it was easy to understand the photophysical properties of this compounds became more interesting in solid-state respect to solution with an improvement in emission efficiency. In this work we aim to characterize in SS organocopper(I)iodide compounds to valuate the correlation between the molecular crystal structure and the photophysical properties. It is also considered to hike new strategies to synthesize CuI complexes from the wet reactions to the more green solvent free methods. The advantages in using these strategies are evident but, obtain a single crystal suitable for SCXRD analysis from these batches is quite impossible. The structure solution still remains the key point in this research so we tackle this problem solving the structure by X-ray powder diffraction data. When the sample was fully characterized we moved to design and development of the associated OLED-device. Since copper iodide complexes are often insoluble in organic solvents, the high vacuum deposition technique is preferred. A new non-conventional deposition process have also been proposed to avoid the low complex stability in this practice with an in-situ complex formation in a layer-by layer deposition route.

Higher-order perturbative relativistic corrections to energies and properties

Relativistic effects need to be considered in quantum-chemical calculations on systems including heavy elements or when aiming at high accuracy for molecules containing only lighter elements. In the latter case, consideration of relativistic effects via perturbation theory is an attractive option. Among the available techniques, Direct Perturbation Theory (DPT) in its lowest order (DPT2) has become a standard tool for the calculation of relativistic corrections to energies and properties.In this work, the DPT treatment is extended to the next order (DPT4). It is demonstrated that the DPT4 correction can be obtained as a second derivative of the energy with respect to the relativistic perturbation parameter. Accordingly, differentiation of a suitable Lagrangian, thereby taking into account all constraints on the wave function, provides analytic expressions for the fourth-order energy corrections. The latter have been implemented at the Hartree-Fock level and within second-order Møller-Plesset perturbaton theory using standard analytic second-derivative techniques into the CFOUR program package. For closed-shell systems, the DPT4 corrections consist of higher-order scalar-relativistic effects as well as spin-orbit corrections with the latter appearing here for the first time in the DPT series.Relativistic corrections are reported for energies as well as for first-order electrical properties and compared to results from rigorous four-component benchmark calculations in order to judge the accuracy and convergence of the DPT expansion for both the scalar-relativistic as well as the spin-orbit contributions. Additionally, the importance of relativistic effects to the bromine and iodine quadrupole-coupling tensors is investigated in a joint experimental and theoretical study concerning the rotational spectra of CH2BrF, CHBrF2, and CH2FI.