Helsingin seudun liikenteenhallinnan kärkihankkeiden päivitys 2011

Työn tavoitteena oli kokonaisnäkemyksen luominen Helsingin seudun liikenteenhallinnan tilasta ja kehitysnäkymistä sekä seuraavien tärkeimpien kehittämispolkujen tunnistaminen ja konkretisointi toimenpiteiksi. Työssä keskityttiin seuraaviin painopistealueisiin 1. Liityntäpysäköinnin informaation ja maksujärjestelmien kehittäminen 2. Liikenteenhallintakeskuksen toiminnan kehittäminen ja laajentaminen 3. Liikennejärjestelmän reaaliaikainen tilannekuva ja lyhyen aikavälin ennusteet 4. Pääkaupunkiseudun pääväylien ruuhkien ja häiriöiden hallinta 5. Joukkoliikenteen ajantasaisen matkustajainformaation kehittäminen. Työssä laadittiin katsaus kullakin painopistealueella jo tapahtuneeseen sekä käynnissä olevaan kehitystyöhön, kuvattiin esiin nousseita ongelmia ja laadittiin esitys vuoteen 2020 ulottuvasta toiminnallisesta tavoitetilasta sekä konkreettisista kehittämistoimista. Työssä järjestettiin myös tulevaisuustyöpaja, johon pyydettiin alustuksia valikoiduilta viranomaistahoilta, tutkijoilta ja palveluntuottajilta. Näiden keskustelujen kautta kirkastettiin seudun toimijoiden näkemystä älyliikenteen toimialan kehitysnäkymistä ja –tarpeista. Työn lopputuloksena syntyneeseen toimenpideohjelmaan kirjattiin yhteensä 30 hanketta. Näistä viisi hanketta valittiin työpajatyöskentelyn kautta varsinaisiksi kärkihankkeiksi, joiden toteutus on kriittistä liikkujien ja viranomaistyön palvelutason kannalta ja joka edellyttää usean toimijan yhteistyötä. Lisäksi tunnistettiin joukko seurattavia hankkeita. Valitut kärkihankkeet, käynnistämisen vastuutaho sekä tavoitteellinen käynnistysvuosi ovat seuraavat: 1. Liityntäpysäköinnin dynaamisen informaatiojärjestelmän pilotointi Hämeenlinnanväylän käytävässä Kehäradan asemilla (HSL 2012) 2. HSL:n alueen joukkoliikenteen häiriönhallinnan uudelleenorganisointi (HSL, Liikennevirasto 2012) 3. Seudullisen liikenteenhallintasuunnitelman laadinta verkollisen operoinnin kehittämiseksi häiriötilanteissa (ELY-keskus, Liikennevirasto 2013) 4. Reaaliaikaisen sujuvuustiedon tuottaminen ruuhkautuvalta pääkatu- ja alempiasteiselta maantieverkolta (Liikennevirasto, kunnat 2012) 5. Liikenteen vaihtuvan ohjauksen ja tiedottamisen hyödyntäminen pääväylien ruuhkautumisen ja häiriöiden hallinnassa. (ELY-keskus 2012) Kärkihankkeisiin ei liity sellaisia riippuvuuksia, että niitä ei voitaisi käynnistää ennen päätöksentekoa jostakin muusta investoinnista. Merkittävimmät riippuvuudet liittyvät LIJ2014-järjestelmän ajoneuvojen paikannuksen ja muiden työkalujen valmistumiseen. Johtoryhmän linjauksen mukaan kärkihankkeissa ja muissakin toimijoiden omissa hankkeissa syntyvien tietojärjestelmien rajapinnat avataan soveltuvasti kaupallisten toimijoiden käyttöön, jolloin syntyvien kaupallisten loppukäyttäjäpalveluiden kautta voidaan parantaa tietopalvelujen tavoittavuutta. Kärkihankkeiden valinta ja sisältö on rakennettu pitkälti sen lähtökohdan varaan, että liikenteen tietopalveluissa julkistoimijoiden roolina on pääasiassa lähtötietojen tuottaminen ja jakaminen varsinaisille palveluntuottajille. Vuoteen 2016 mennessä uusien rajapintojen kautta jaettavien tietojen määrä on nykyiseen verrattuna huomattavasti laajempi, ja odotukset uusien ja innovatiivisten palvelujen syntymiselle ovat korkeat. HLH-johtoryhmä nimeää jokaisen kärkihankkeen läpiviennistä vastaavan työryhmän, joiden työskentelyä ohjataan nykyisen kaltaisessa johtoryhmätyössä. Johtoryhmätyön organisointi on todettu toimivaksi, sillä ryhmä koostuu seudun 14 kunnan alueen keskeisistä julkisista toimijoista ja sen kautta on olemassa vahvat kytkennät sekä seudun liikennejärjestelmätyöhön (HLJ) että valtakunnalliseen älyliikenteen kehitystyöhön.

Oil Transportation in the Gulf of Finland in 2020 and 2030

This study is part of the Minimizing risks of maritime oil transport by holistic safety strategies (MIMIC) project. The purpose of this study is to provide a current state analysis of oil transportation volumes in the Baltic Sea and to create scenarios for oil transportation in the Gulf of Finland for the years 2020 and 2030. Future scenarios and information about oil transportation will be utilized in the modelling of oil transportation risks, which will be carried out as part of the MIMIC project. Approximately 290 million tons of oil and oil products were transported in the Baltic Sea in 2009, of which 55% (160 million tons) via the Gulf of Finland. Oil transportation volumes in the Gulf of Finland have increased from 40 million to almost 160 million tonnes over the last ten years. In Russia and Estonia, oil transportation mainly consists of export transports of the Russian oil industry. In Finnish ports in the Gulf of Finland, the majority of oil traffic is concentrated to the port of Sköldvik, while the remainder mainly consists of different oil products for domestic use. Transit transports to/from Russia make up small volumes of oil transportation. The largest oil ports in the Gulf of Finland are Primorsk, Tallinn, St. Petersburg and Sköldvik. The basis for the scenarios for the years 2020 and 2030 is formed by national energy strategies, the EU`s climate and energy strategies as well other energy and transportation forecasts for the years 2020 and 2030. Three alternative scenarios were produced for both 2020 and 2030. The oil volumes are based on the expert estimates of nine specialists. The specialists gave three volumes for each scenario: the expected oil transport volumes, and the minimum and maximum volumes. Variations in the volumes between the scenarios are not large, but each scenario tends to have rather a large difference between the figures for minimum and maximum volumes. This variation between the minimum and maximum volumes ranges around 30 to 40 million tonnes depending on the scenario. On the basis of this study, no a dramatic increase in oil transportation volumes in the Gulf of Finland is to be expected. Most of the scenarios only forecasted a moderate growth in maritime oil transportation compared to the current levels. The effects of the European energy policy favouring renewable energy sources can be seen in the 2030 scenarios, in which the transported oil volumes are smaller than in the 2020 scenarios. In the Slow development 2020 scenario, oil transport volumes for 2020 are expected to be 170.6 Mt (million tonnes), in the Average development 2020 187.1 Mt and in the Strong development 2020 201.5 Mt. The corresponding oil volumes for the 2030 scenarios were 165 Mt for the Stagnating development 2030 scenario, 177.5 Mt for the Towards a greener society 2030 scenario and 169.5 Mt in the Decarbonising society 2030 scenario.

Scheduling of guarded command based models

Formal methods provide a means of reasoning about computer programs in order to prove correctness criteria. One subtype of formal methods is based on the weakest precondition predicate transformer semantics and uses guarded commands as the basic modelling construct. Examples of such formalisms are Action Systems and Event-B. Guarded commands can intuitively be understood as actions that may be triggered when an associated guard condition holds. Guarded commands whose guards hold are nondeterministically chosen for execution, but no further control flow is present by default. Such a modelling approach is convenient for proving correctness, and the Refinement Calculus allows for a stepwise development method. It also has a parallel interpretation facilitating development of concurrent software, and it is suitable for describing event-driven scenarios. However, for many application areas, the execution paradigm traditionally used comprises more explicit control flow, which constitutes an obstacle for using the above mentioned formal methods. In this thesis, we study how guarded command based modelling approaches can be conveniently and efficiently scheduled in different scenarios. We first focus on the modelling of trust for transactions in a social networking setting. Due to the event-based nature of the scenario, the use of guarded commands turns out to be relatively straightforward. We continue by studying modelling of concurrent software, with particular focus on compute-intensive scenarios. We go from theoretical considerations to the feasibility of implementation by evaluating the performance and scalability of executing a case study model in parallel using automatic scheduling performed by a dedicated scheduler. Finally, we propose a more explicit and non-centralised approach in which the flow of each task is controlled by a schedule of its own. The schedules are expressed in a dedicated scheduling language, and patterns assist the developer in proving correctness of the scheduled model with respect to the original one.

De-escalation of commitment management strategy in IT project management methodology: case of ERP implementation project by IT consulting company

According to several surveys and observations, the percentage of successfully conducted IT projects without over-budgeting and delays in time schedule are extremely low. Many projects also are evaluated as failures in terms of delivered functionality. Nuldén (1996) compares IT projects with bad movies; after watching for 2 hours, one still tries to finish it even though one understands that it is a complete waste of time. The argument for that is 'I've already invested too much time to terminate it now'. The same happens with IT projects: sometimes the company continues wasting money on these projects for a long time, even though there are no expected benefits from these projects. Eventually these projects are terminated anyway, but until this moment, the company spends a lot. The situation described above is a consequence of “escalation of commitment” - project continuation even after a manager receives negative feedback of the project’s success probability. According to Keil and Mähring (2010), even though escalation can occur in any type of project, it is more common among complex technological projects, such as IT projects. Escalation of commitment very often results in runaway projects. In order to avoid it, managers use de-escalation strategies, which allow the resources to be used in more effective. These strategies lead to project termination or turning around, which stops the flow of wasted investments. Numbers of researches explore escalation of commitment phenomena based on experiments and business cases. Moreover, during the last decade several frameworks were proposed for de-escalation strategy. However, there is no evidence of successful implementation of the de-escalation of commitment strategy in the literature. In addition, despite that fact that IT project management methodologies are widely used in the companies, none of them cover the topic of escalation of commitment risks. At the same time, there are no researches proposing the way to implement de-escalation of commitment strategy into the existing project management methodology The research is focused on a single case of large ERP implementation project by the consulting company. Hence, the main deliverables of the study include suggestions of improvement in de-escalation methods and techniques in the project and in the company. Moreover, the way to implement these methods into existing project management methodology and into the company general policies is found.

Genotype characterization of Haematobia irritans from different Brazilian geographic regions based on randomly amplified polymorphic DNA (RAPD) analysis

Blood-sucking diptera are important parasites in bovine production systems, especially regarding confinement conditions. Haematobia irritans, the horn fly, is one of the most troublesome species within bovine production systems, due to the intense stress imposed to the animals. An important aspect while studying the variability within a species is the study of the geographic structure of its populations and, attempting to find out the genetic flow of Brazilian populations of horn fly, the RAPD technique, which is suited for this purpose, has been used. The use of molecular markers generated from RAPD made it possible to identify the geographic origin of samples from different Brazilian geographic regions, as well as to estimate the genotypic flow among the different Brazilian populations of the horn fly.

The nature of communication structures of university students in an international web-based computer-supported collaborative learning (CSCL) course

Communication, the flow of ideas and information between individuals in a social context, is the heart of educational experience. Constructivism and constructivist theories form the foundation for the collaborative learning processes of creating and sharing meaning in online educational contexts. The Learning and Collaboration in Technology-enhanced Contexts (LeCoTec) course comprised of 66 participants drawn from four European universities (Oulu, Turku, Ghent and Ramon Llull). These participants were split into 15 groups with the express aim of learning about computer-supported collaborative learning (CSCL). The Community of Inquiry model (social, cognitive and teaching presences) provided the content and tools for learning and researching the collaborative interactions in this environment. The sampled comments from the collaborative phase were collected and analyzed at chain-level and group-level, with the aim of identifying the various message types that sustained high learning outcomes. Furthermore, the Social Network Analysis helped to view the density of whole group interactions, as well as the popular and active members within the highly collaborating groups. It was observed that long chains occur in groups having high quality outcomes. These chains were also characterized by Social, Interactivity, Administrative and Content comment-types. In addition, high outcomes were realized from the high interactive cases and high-density groups. In low interactive groups, commenting patterned around the one or two central group members. In conclusion, future online environments should support high-order learning and develop greater metacognition and self-regulation. Moreover, such an environment, with a wide variety of problem solving tools, would enhance interactivity.

Model-based estimation of liquid flows in the blast furnace hearth and taphole

This thesis presents a set of methods and models for estimation of iron and slag flows in the blast furnace hearth and taphole. The main focus was put on predicting taphole flow patterns and estimating the effects of various taphole conditions on the drainage behavior of the blast furnace hearth. All models were based on a general understanding of the typical tap cycle of an industrial blast furnace. Some of the models were evaluated on short-term process data from the reference furnace. A computational fluid dynamics (CFD) model was built and applied to simulate the complicated hearth flows and thus to predict the regions of the hearth exerted to erosion under various operating conditions. Key boundary variables of the CFD model were provided by a simplified drainage model based on the first principles. By examining the evolutions of liquid outflow rates measured from the furnace studied, the drainage model was improved to include the effects of taphole diameter and length. The estimated slag delays showed good agreement with the observed ones. The liquid flows in the taphole were further studied using two different models and the results of both models indicated that it is more likely that separated flow of iron and slag occurs in the taphole when the liquid outflow rates are comparable during tapping. The drainage process was simulated with an integrated model based on an overall balance analysis: The high in-furnace overpressure can compensate for the resistances induced by the liquid flows in the hearth and through the taphole. Finally, a recently developed multiphase CFD model including interfacial forces between immiscible liquids was developed and both the actual iron-slag system and a water-oil system in laboratory scale were simulated. The model was demonstrated to be a useful tool for simulating hearth flows for gaining understanding of the complex phenomena in the drainage of the blast furnace.

Integration of Electronic Commerce and Enterprise Systems

The necessity of EC (Electronic Commerce) and enterprise systems integration is perceived from the integrated nature of enterprise systems. The proven benefits of EC to provide competitive advantages to the organizations force enterprises to adopt and integrate EC with their enterprise systems. Integration is a complex task to facilitate seamless flow of information and data between different systems within and across enterprises. Different systems have different platforms, thus to integrate systems with different platforms and infrastructures, integration technologies, such as middleware, SOA (Service-Oriented Architecture), ESB (Enterprise Service Bus), JCA (J2EE Connector Architecture), and B2B (Business-to-Business) integration standards are required. Huge software vendors, such as Oracle, IBM, Microsoft, and SAP suggest various solutions to address EC and enterprise systems integration problems. There are limited numbers of literature about the integration of EC and enterprise systems in detail. Most of the studies in this area have focused on the factors which influence the adoption of EC by enterprise or other studies provide limited information about a specific platform or integration methodology in general. Therefore, this thesis is conducted to cover the technical details of EC and enterprise systems integration and covers both the adoption factors and integration solutions. In this study, many literature was reviewed and different solutions were investigated. Different enterprise integration approaches as well as most popular integration technologies were investigated. Moreover, various methodologies of integrating EC and enterprise systems were studied in detail and different solutions were examined. In this study, the influential factors to adopt EC in enterprises were studied based on previous literature and categorized to technical, social, managerial, financial, and human resource factors. Moreover, integration technologies were categorized based on three levels of integration, which are data, application, and process. In addition, different integration approaches were identified and categorized based on their communication and platform. Also, different EC integration solutions were investigated and categorized based on the identified integration approaches. By considering different aspects of integration, this study is a great asset to the architectures, developers, and system integrators in order to integrate and adopt EC with enterprise systems.

Flows of Bingham Materials Through Ideal Porous Media: an Experimental and Theoretical Study

The flow of Bingham liquids through porous media has been studied. Experiments have been performed to determine the flow rate / pressure drop relationship for the flow of a grease of Binghamian rheological behavior through an array of rods of circular cross section. The yield stress and plastic viscosity of the grease have been determined with the aid of a controlled stress rotational rheometer. To investigate a wider range of the flow parameters, the mass and momentum conservation equations have been solved numerically, in conjunction with the generalized Newtonian constitutive law and the bi-viscosity model. The finite volume method has been employed to obtain the numerical solution. These numerical results also yielded a flow rate / pressure drop relationship, which is in very good agreement with the experimental results. A capillaric theory has been developed to determine an analytical relationship between the flow rate and pressure drop for flows of Bingham liquids through porous media. It is shown that the predictions of this theory are in good agreement with the experimental and numerical results.

Scenario-based traffic forecasts for the routes between the PENTA ports in 2020

Maritime transport is the foundation for trade in the Baltic Sea area. It represents over 15% of the world’s cargo traffic and it is predicted to increase by over 100% in the future. There are currently over 2,000 ships sailing on the Baltic Sea and both the number and the size of ships have been growing in recent years. Due to the importance of maritime traffic in the Baltic Sea Region, ports have to be ready to face future challenges and adapt to the changing operational environment. The companies within the transportation industry – in this context ports, shipowners and logistics companies – compete continuously and although the number of companies in the business is not particularly substantial because the products offered are very similar, other motives for managing the supply chain arise. The factors creating competitive advantage are often financial and related to cost efficiency, but geographical location, road infrastructure in the hinterland and vessel connections are among the most important factors. The PENTA project focuses on adding openness, transparency and sharing knowledge and information, so that the challenges of the future can be better addressed with regard to cooperation. This report presents three scenario-based traffic forecasts for routes between the PENTA ports in 2020. The chosen methodology is PESTE, in which the focus in on economic factors affecting future traffic flows. The report further analyses the findings and results of the first PENTA WP2 report “Drivers of demand in cargo and passenger traffic between PENTA ports” and utilises the same material, which was obtained through interviews and mail surveys.

Use of fiber-reinforced composite framework and thermochromic pigment in maxillofacial prostheses

The purpose of this investigation was to evaluate the possibility to enhance certain qualities of facial prostheses. Polymethyl methacrylate is still being used as base mate¬rial or clip carrier material, but it is hard and heavy, and debonding of the silicone from the acrylic base material is a frequent problem. This thesis aims to evaluate the use of fiber-reinforced composite (FRC) as framework material for maxillofacial silicone prostheses. FRC has been used as reinforcement in removable and fixed partial dentures since the 1990s. This material is lightweight and can be fabricated to compress the margins of the prosthesis slightly, to keep it tightly against the skin during jaw movements and facial expressions. Additionally, the use of a thermochromic pigment, colorless in room temperature and red in a cold environment, was studied in order to evaluate the possibility of using this color changing pigment in facial prostheses to mimic the color change of facial skin in cold weather. The tensile bond strength between pre-impregnated, unidirectional FRC and maxillofacial silicone elastomer was studied. Three different bonding agents or primers were compared. Bond strength was improved by one of the primers and by roughening the surface. The effect of a skin compressing glass fiber-reinforced composite framework on facial skin blood flow was studied by using a face mask, constructed with a compression pad corresponding to the outer margin of a glass fiber-reinforced framework beam of a facial prosthesis. The skin blood flow of ten healthy volunteers, aged 23-25 years, was measured during touch, light, and moderate compression of the skin, by using laser Doppler imaging technique. None of the compressions showed any marked effects on local skin blood flow. There were no significant differences between blood flow during compression and at baseline. Maxillofacial silicone elastomer was colored intrinsically with conventional color pigments: a control group containing only conventional pigments was compared to two test groups with 0.2 wt% and 0.6 wt% thermochromic pigment added. The color of the material was measured with a spectrophotometer in room temperature and after storage in a freezer. The color stability of the maxillofacial silicone elastomer colored with thermo¬chromic pigment was evaluated by artificial aging. The color dif¬ference of the L* (lightness) and a* values (redness), comparing color after the samples were stored at room temperature and in a freezer (-19°C), was statistically significant for both 0.2 wt% and 0.6 wt% thermo¬chromic pigment groups. The differences in the b* values (yellowness) were statistically significant for the 0.6 wt% group. Exposure to ultraviolet (UV) radiation led to visually noticeable and statistically signifi¬cant color changes (ΔE) in all color values in both test groups. The specimens containing thermochromic pigment were very sensitive to UV radiation. In conclusion, a framework of fiber-reinforced composite can successfully be bonded to maxillofacial silicone elastomer, and a framework beam, compressing the facial skin, did not remarkably alter the skin blood flow on healthy, young adults. The thermochromic pigment showed color change in maxillofacial silicone elastomer. However, artificial aging showed that it was too sensitive to UV radiation to be used, as such, in maxillofacial prostheses.

Risk Assessment of a Supplier in the Pharmaceutical Industry

The topic of this Master’s Thesis is risk assessment in the supply chain, and the work was done for a company operating in the pharmaceutical industry. The unique features of the industry bring additional challenges to risk management, due to high regulatory, docu-mentation and traceability requirements. The objective of the thesis was to generate a template for assessing the risks in the supply chain of current and potential suppliers of the case company. Risks pertaining to the case setting were sought mainly from in-house expertise of this specific product and supply chain as well as academic research papers and theory on risk management. A questionnaire was set up to assess the found risks on impact, occurrence and possibility of detection. Through this classification of the severity of the risks, the supplier assessment template was formed. A questionnaire template, comprised of the top 10 risks affecting the flow of information and materials in this setting, was formulated to serve as a generic tool for assessing risks in the supply chain of a pharmaceutical company. The template was tested on another supplier for usability and accuracy of found risks, and it demonstrated functioning in a differing supply chain and product setting.

Evolution of Ryegrass Seed Banks Depending on Soil Tillage and Crops

The seed bank is characterized by the amount of seeds and other viable reproductive structures in the soil and it is changed by the input and output of seeds, being classified by its permanence in the soil as transient or permanent. The tillage and crops used decisively influence this dynamic and more disturbed areas tend to have richer seed banks. The purpose of this study was to test different soil tillage and crop systems, aiming to reduce or eliminate the ryegrass in the area. The experiment was conducted from 2010 to 2012. In the first year, the effect of chemical tillage was assessed, compared to the area without tillage. From the second year on, in the area that received chemical tillage, the second experiment was installed, where it was assessed the effect of soil tillage and crop rotation in the ryegrass seed yield. The soil tillage treatment was chisel plow and non-chisel plow. The crop rotation was: fallow/soybean; wheat/soybean; black oat/maize. The samples of soil were taken three times a year and split in 0-5, 5-10, 10-15 and 15-20 cm. After sampling, the seeds were separated from the soil and sterilized. Afterwards, germination and tetrazolium test were conducted. In the same plots used for soil sampling, the emergence flow of ryegrass was assessed in the winter 2011 and 2012. In the first year it was observed that chemical tillage had considerably reduced the amount of ryegrass in the soil. The crop rotations used were more effective than soil tillage in reducing the seed banks in the soil. The rotation oat/maize and wheat/soybean, in only two years, practically zeroed the ryegrass seed banks in the area.

Development of sales invoicing process in industrial services

The objective of this Master’s thesis is to find ways to streamline the invoicing process of the case company. In order to streamline the process, the bottlenecks and development areas of the present invoicing process needs to be identified. The bottlenecks are based on interviews made to personnel. The thesis also offers solutions to overcome the identified bottlenecks. The problem is the slowness of the invoicing process which should get rid off. The slow invoicing process causes delays in obtaining payments. There are many reasons for the slowness and inefficiency of the invoicing process. One of the biggest reasons is that the information systems are not deployed entirely. It causes additional work for everyone. Practices with the customers affect also to the smooth flow of invoicing. The contracts determine when the customer can be invoiced but also work approvals, missing work orders and customer’s own invoicing basis slow the process. The fastest and cheapest solution is to deploy the systems better and do things correctly. Thus duplicated work would decrease and resources would be saved. The work allocation should be modified and the practices with customer should be influenced too. In the future the meaning of IT should be highlighted and new devices exploited.

Changes in the electrophysiological parameters of the posterior intestine of Anguilla anguilla (Pisces) induced by oxytocin, urotensin II and aldosterone

In view of the importance of the intestine in the osmoregulation of freshwater fishes, we determined the effects of oxytocin, urotensin II (UII), and aldosterone added to the serosal side of the isolated posterior intestine of the freshwater-adapted teleost Anguilla anguilla on electrophysiological parameters. Oxytocin decreased the short-circuit current (SCC) and transepithelial potential difference (TPD) at concentrations of 1 and 10 mU/ml (to 50% and 42% of control values, respectively), but did not alter these parameters at a concentration of 0.1 mU/ml. UII reduced SCC and TPD at concentrations of 10 nM, 50 nM and 100 nM (to 85% of control values), but increased these parameters at the concentration of 500 nM (to 115% of control values). Aldosterone did not alter SCC or TPD at the concentrations tested (10 nM and 100 nM). Oxytocin may open Na+ channels in the apical membrane, allowing the flow of Na+ to the serosa, reducing SCC and TPD. Should this hypothesis be correct, oxytocin would be important for freshwater adaptation, since it would increase Na+ absorption. The reduction of SCC and TPD in the posterior intestine of A. anguilla induced by UII is evidence that this neurohormone is also important for freshwater adaptation in teleosts. Aldosterone did not show this effect probably due to the lack of receptors in this organ