Graded index 532HR/1064HT filter by glancing angle deposition

Glancing angle deposition is a novel method to prepare graded index coatings. By using this method and physical vapour deposition, ZrO2 is used to engineer graded index filter on BK7 glass substrate. Controlling the deposition rate and the periodic oscillation of oblique angle of deposited material, a 10-period graded index ZrO2 filter with high reflection near 532 nm and high transmittance at wavelength 1064 nm is fabricated. The causes of difference between the theoretical and experimental results are discussed in detail. The material properties and electron gun nonlinearity are possibly the main origins of the difference, which result in the variations in both thickness control and deposition rate of the Elm material.

Structural and optical properties of nanostructured TiO2 thin films fabricated by glancing angle deposition

TiO2 films deposited by electron beam evaporation with glancing angle deposition (GLAD) technique were reported. The influence of flux angle on the surface morphology and the microstructure was investigated by scanning electron microscopy. The GLAD TiO2 films are anisotropy with highly orientated nanostructure of the slanted columns. With the increase of flux angle, refractive index and packing density decrease. This is caused by the shadowing effect dominating film growth. The anisotropic structure of TiO2 films results in optical birefringence, which reaches its maximum at the flux angle alpha = 65 degrees. The maximum birefringence of GLAD TiO2 films is higher than that of common bulk materials. It is suggested that glancing angle deposition may offer an effective method to obtain tailorable refractive index and birefringence in a large continuous range. (c) 2006 Elsevier B.V. All rights reserved.

Preparation of high laser induced damage threshold antireflection film using interrupted ion assisted deposition

Single layers and antireflection films were deposited by electron beam evaporation, ion assisted deposition and interrupted ion assisted deposition, respectively. Antireflection film of quite high laser damage threshold (18J/cm(2)) deposited by interrupted ion assisted deposition were got. The electric field distribution, weak absorption, and residual stress of films and their relations to damage threshold were investigated. It was shown that the laser induced damage threshold of film was the result of competition of disadvantages and advantages, and interrupted ion assisted deposition was one of the valuable methods for preparing high laser induced damage threshold films. (c) 2007 Optical Society of America

Influence of deposition conditions on the microstructure of oxides thin films

Thin films of ZrO2, HfO2 and TiO2 were deposited on kinds of substrates by electron beam evaporation (EB), ion assisted deposition (IAD) and dual ion beam sputtering (DIBS). Then some of them were annealed at different temperatures. X-ray diffraction (XRD) was applied to determine the crystalline phase and the grain size of these films, and the results revealed that their microstructures strongly depended on the deposition conditions such as substrate, deposition temperature, deposition method and annealing temperature. Theory of crystal growth and migratory diffusion were applied to explain the difference of crystalline structures between these thin films deposited and treated under various conditions. (c) 2007 Elsevier B.V. All rights reserved.

Influences of oxygen partial pressure on structure and related properties of ZrO2 thin films prepared by electron beam evaporation deposition

ZrO2 thin films were prepared by electron beam evaporation at different oxygen partial pressures. The influences of oxygen partial pressure on structure and related properties of ZrO2 thin films were studied. Transmittance, thermal absorption, structure and residual stress of ZrO2 thin films were measured by spectrophotometer, surface thermal lensing technique (STL), X-ray diffraction and optical interferometer, respectively. The results showed that the structure and related properties varied progressively with the increase of oxygen partial pressure. The refractive indices and the packing densities of the thin films decreased when the oxygen partial pressure increased. The tetragonal phase fraction in the thin films decreased gradually as oxygen partial pressure increased. The residual stress of film deposited at base pressure was high compressive stress, the value decreased with the increase of oxygen partial pressure, and the residual stress became tensile with the further increase of oxygen pressure, which was corresponding to the evolution of packing densities and variation of interplanar distances. (c) 2007 Elsevier B.V. All rights reserved.

Preparation and characterization of nanostructured ZrO2 thin films by glancing angle deposition

ZrO2 films were prepared by electron beam evaporation with glancing angle deposition (GLAD) technique. The as-deposition and annealed ZrO2 films are all amorphous, different from that deposited at normal incidence. Due to the shadowing effect, a highly orientated structure composed of slanted columns formed, and the obtained films became the mixture of slanted columns and voids. The relationship among the effective refractive index, packing density and flux incident angle was investigated. The refractive index and packing density of ZrO2 films decrease with the increase of the incident angle. The in-plane birefringence of GLAD ZrO2 films was calculated. At the packing density of 0.576, the maximum birefringence is 0.037. (c) 2006 Elsevier B.V. All rights reserved.

Influence of oxygen post-treatment on laser-induced damage of antireflection coatings prepared by electron-beam evaporation and ion beam assisted deposition

Antireflection coatings at the center wavelength of 1053 nm were prepared on BK7 glasses by electron-beam evaporation deposition (EBD) and ion beam assisted deposition (IBAD). Parts of the two kinds of samples were post-treated with oxygen plasma at the environment temperature after deposition. Absorption at 1064 nm was characterized based on surface thermal lensing (STL) technique. The laser-induced damage threshold (LIDT) was measured by a 1064-nm Nd:YAG laser with a pulse width of 38 ps. Leica-DMRXE Microscope was applied to gain damage morphologies of samples. The results revealed that oxygen post-treatment could lower the absorption and increase the damage thresholds for both kinds of as-grown samples. However, the improving effects are not the same. (c) 2008 Elsevier B.V. All rights reserved.

Structure and optical properties of Nb2O5 sculptured thin films by glancing angle deposition

Nb2O5 sculptured thin. films deposited by electron beam evaporation with glancing angle deposition were prepared. Nb2O5 sculptured thin. films with tilted columns are optical anisotropy. XRD, SEM, UV-vis-NIR spectra are employed to characterize the microstructure and optical properties. The maximum of birefringence (Delta n) is up to 0.045 at alpha = 70 degrees with packing density of 0.487. With increasing the deposition angle, refractive index and packing density of Nb2O5 STF are decreasing. The relationship among deposition parameter, microstructure and optical properties was investigated in detail. (C) 2008 Elsevier B. V. All rights reserved.

Effects of deposition rates on laser damage threshold of TiO2/SiO2 high reflectors

TiO2 single layers and TiO2/SiO2 high reflectors (HR) are prepared by electron beam evaporation at different TiO2 deposition rates. It is found that the changes of properties of TiO2 films with the increase of rate, such as the increase of refractive index and extinction coefficient and the decrease of physical thickness, lead to the spectrum shift and reflectivity bandwidth broadening of HR together with the increase of absorption and decrease of laser-induced damage threshold. The damages are found of different morphologies: a shallow pit to a seriously delaminated and deep crater, and the different amorphous-to-anatase-to-rutile phase transition processes detected by Raman study. The frequency shift of Raman vibration mode correlates with the strain in. film. Energy dispersive X-ray analysis reveals that impurities and non-stoichiometric defects are two absorption initiations resulting to the laser-induced transformation. (C) 2008 Elsevier B. V. All rights reserved.

Avaliação da intervenção terapêutica com produto natural na cicatrização de ferida cutânea: o uso de óleo de capivara

A cicatrização de feridas cutâneas visa restaurar a integridade da pele, objetivando um fechamento rápido da lesão e a formação de uma cicatriz funcional e esteticamente satisfatória. Diversos modelos in vivo têm sido estudados a fim de caracterizar diversos componentes e mecanismos envolvidos no reparo tecidual e avaliar os efeitos de potenciais compostos terapêuticos que aceleram o processo de cicatrização. O óleo extraído da gordura subcutânea de capivara possui certas propriedades, entre elas está o seu uso em ferimentos externos com o intuito de acelerar o processo cicatricial, embora tal evento não seja confirmado em pesquisas experimentais. O presente estudo teve como objetivo investigar os possíveis efeitos da aplicação tópica de óleo de capivara em feridas cutâneas induzidas em camundongos Swiss, avaliando sua interferência macro e microscópica no processo de cicatrização das lesões. A lesão foi realizada no dorso dos animais, que receberam aplicação tópica do óleo de capivara (0,1 ml) durante 3, 7, 14 e 21 dias de pós-operatório (PO), conforme protocolo estabelecido. Ao final dos dias, foi realizada eutanásia dos animais e fragmentos de lesão e pele adjacente foram coletados e processados para a microscopia de luz. Cortes histológicos da amostra foram corados com hematoxilina e eosina, azul de toluidina, picro sirius red, resorcina fucsina de Weigert, e imunomarcadas para detecção de antígeno nuclear de proliferação celular. Foram analisados macroscopicamente o aspecto geral da lesão, contração da lesão e reepitelização, e microscopicamente a espessura da neoepiderme, quantidade de leucócitos polimorfonucleares (PMN) e mastócitos, proliferação celular na epiderme e derme, e avaliação das fibras de colágeno e do sistema elástico-microfibrilar na matriz extracelular da derme cicatricial. Os animais tratados topicamente com o óleo de capivara mostraram, comparados ao grupo controle que não recebeu tratamento, melhor desenvolvimento da crosta de fibrina nas fases iniciais da cicatrização e desaparecimento da mesma antes do 14 dia PO; maior contração e reepitelização da área da lesão, bem como neoepiderme mais espessa em 7 dias PO; aumento do número de leucócitos PMN em 3 dias PO e sua gradativa redução nos dias subsequentes e diminuição do número de mastócitos em 21 dias PO. Além disso, no grupo tratado com óleo de capivara foi observada uma benéfica modulação das fibras colágenas e elásticas presentes na matriz extracelular da derme, apresentando aceleração da deposição de fibras de colágeno do tipo I e melhor organização dessas fibras no tecido, bem como aceleração da elastogênese com o aparecimento das fibras do sistema elástico-microfibrilar a partir do 7 dia PO. O presente trabalho demonstrou que o emprego tópico do óleo de capivara em feridas cutâneas de camundongos interfere favoravelmente no processo de cicatrização, acelerando o fechamento da ferida e a reparação da epiderme e derme