Quantitative Sustainability Disclosure –An international comparison and its impact on investor valuation

This research focuses on the link between quantitative sustainability disclosure and information asymmetry. It builds upon previous research which links information asymmetry with voluntary disclosure. Stakeholders from the financial services sector claim that sustainability disclosure needs to be more numerical and comparable between companies. This research covers 111 firms from Denmark, Finland, the Netherlands and Sweden from non-service industries and studies how quantitative their sustainability disclosure is, and whether or not there is a negative relation with information asymmetry. The results support the hypotheses, where two out of three information asymmetry proxies have a significant negative relation with quantitative disclosure. Size is supported as a moderating factor. Quantitativity also proves to have a significant link with third party sustainability ratings. The direct link between quantitativity and cost of capital is not however supported.

Kiinteistön elinkaarihankkeen rahoitus ja riskit

Julkisen sektorin kiinteistötuotannossa toteutetaan kasvavassa määrin julkisen ja yksityisen sektorin yhteistyötä, jossa yksityinen yritys ottaa vastuun kiinteistöön liittyvistä suunnittelu-, rakentamis- ja ylläpitotoimista pitkäksi ajanjaksoksi. Työn tavoitteena on arvioida elinkaarimallilla toteuttavien kiinteistöhankkeiden toteutusvaihtoehdot, sekä kartoittaa elinkaarihankkeen sisältämiä riskejä hankkeen suunnitteluvaiheessa. Tutkimus suoritetaan kvalitatiivisena tutkimuksena, jota tuetaan tarvittavilla kvantitatiivista tietoa hyödyntävillä laskelmilla. Tutkimusaineistona käytetään aihepiiriin liittyviä akateemisia julkaisuja ja oppikirjoja. Työn toimeksiantajan YIT:n kautta tutkimukseen on saatu arvokasta asiantuntemusta ja materiaalia. Elinkaarihankkeiden hankintamenettelyksi suositellaan kilpailullista neuvottelumenettelyä. Kilpailullinen neuvottelumenettely mahdollistaa tilaajan ja palveluntuottajien välisen dialogin hankintamenettelyn aikana, jolloin osapuolet voivat yhteistyössä valita sopivimman toteutusmallin. Hankkeiden rahoitus voidaan toteuttaa tilaajan rahoituksella tai yksityisrahoituksella. Rahoituksen näkökulmasta tilaajan oma rahoitus on edullisin, mikä ei kuitenkaan vähennä elinkaarimallista saatavia etuja perinteiseen urakointiin verrattuna. Laskelman perusteella tilaajan rahoituksen ja yksityisrahoituksen keskimääräisessä korkotasossa (WACC) on eroa 2,8 %. Projektiyhtiön perustaminen tekee rahoituksesta entistä kalliimpaa, koska taseeseen kohdistuviin kustannuksiin lisätään projektiyhtiön oman pääoman tuottovaatimusta vastaava korko. Palveluntuottajan kannalta olennaiset riskit ovat rakennusvaiheen viivästyminen, kiinteistön käytettävyyden ja soveltuvuuden puutteista aiheutuvat muutostyöt. Palvelumaksun sitominen huonosti ylläpidon todellista kulurakennetta kuvaavaan elinkustannusindeksiin tulee pitkällä sopimuskaudella vähentämään palveluntuottajan toiminnan kannattavuutta. Kiinteistön ylläpidon kustannusindeksi on vuosina 2005–2011 noussut 2,3 % nopeammin vuodessa kuin elinkustannusindeksi.

Huoltovarmuuskeskeinen varaosavaraston suunnittelututkimus

Tämän diplomityön päätavoitteena on ollut kunnossapidon kohteiden varaosien hallintaan soveltuvan laskentamallin kehittäminen ja sen tutkiminen valitussa case-kohteessa. Laskentamallissa on kartoitettu huoltovarmuuskeskeisen varastonhallinnan kannalta ne minimitiedot, joiden avulla voidaan olemassa olevat niukat lähtötiedot huomioiden tarkastella varastointikustannuksiin ja varaosien puuteriskiin liittyvää varastointiproblematiikkaa päätöksenteon tueksi. Laskentamalli voidaan jakaa kustannuskomponentteihin, jotka ovat varaosiin sitoutuneet pääomakustannukset, varaosien varastoimisesta aiheutuvat varastointikustannukset ja varaosan puutteesta laitteen vikaantuessa aiheutuvat tuotannon menetyksen kustannukset. Tämän mallin avulla on tarkoitus löytää varaosanimikkeille sopivat tilauspisteet sekä ostoeräkoot osan puutteesta aiheutuva riskikustannus huomioiden. Tämän työn tutkimusosiossa selvitettiin laskentamallin soveltuvuus ABB Oy Servicen huoltopalveluliiketoiminnan tukemiseen eri kunnossapitokohteissa. Teorioiksi mallin luomiseen määriteltiin todennäköisyyslaskentaan perustuva Poisson-jakauma varaosavaraston palveluasteen määrittämiseksi kulutustiedon / vikataajuuden perusteella sekä EOQ taloudellisen ostoeräkoon laskemiseksi.

Beta and debt premium for a Finnish distribution company

Suomessa sähkönjakelu on säännelty monopoli. Energiamarkkinavirasto tuottaa ohjeistuksen sekä mallin yritysten ansaintamahdollisuuksille. Karkeasti sanottuna tulomalli on sijoitetun pääoman ja pääoman painotetun kustannuksen tulo. Pääoman painotettu kustannus koostuu useista parametreista kuten beta ja vieraan pääoman riskipreemio. Näiden parametrien taso ja määrittämisajankohta perustuvat subjektiivisiin näkemyksiin, kun objektiivista parametrien määrittämismenetelmää tulisi käyttää. Nykyiset beta ja vieraan pääoman riskipreemio perustuvat energiamarkkinaviraston ja asiantuntijoiden lausuntoihin. Aihealuetta on tutkittu erittäin vähän, mikä johtunee pääasiassa siitä, ettei ole olemassa listautuneita puhtaita jakeluverkkoyhtiöitä. Betan nykytaso on 0.529 ja vieraan pääoman riskipreemio on 1.0 %. Tässä pro gradu –työssä määritetään markkinaperusteisesti betan ja vieraan pääoman riskipreemion nykytaso. Tässä työssä esiteltävä määrittämismalli perustuu puhtaasti markkinadataan eikä sen soveltamisessa käytetä subjektiivisia mielipiteitä. Markkinaehtoisia tietoja käyttäen betan pitäisi olla tasolla 0.525 ja vieraan pääoman riskipreemion tasolla 1.34 %. Nämä luvut, mikäli ne otettaisiin käyttöön, vaikuttaisivat suoraan ja positiivisesti jakeluverkkoyhtiöiden sallittuun tuottoon Suomessa.

Keskeneräisen tuotannon hallinta sähkönjakeluverkon urakointiprojekteissa

The main objective of the study was to find new approaches to the management of work in process in a rapidly changing power distribution network contracting environment in order to improve the efficiency of the management of capital and workload. The study describes the operating environment of a power distribution network contractor based in Eastern Finland and combines various activity indicators to create a general view. The literature review discusses scientific articles on project production, work in process and working capital management, analytical tools for projects as well as Lean criteria. The analysis of two case studies dealing with the characteristics of the power distribution network restructuring, focuses on how production management and management of work in process can potentially be improved in power distribution network contracting environments. The main results are the summary of the key figures of production, the data concerning the significance of different project types for work in process as well as the ways of improving the efficiency of production and business development in the present context.

Industrial solution business – transition from product to solution offering

The business logic in the manufacturing industry has changed in the 21st century. In the current industrial market, manufacturers are driven to provide more comprehensive offerings that go beyond the traditional product-orientation by providing capacity and availability for their customers. From incidental merchandise, services have become the core of manufacturers’ offerings with long-lasting service agreements over the life-cycles of their products. This change is driven both by the need of providers to grow and gain competitive advantage and by increased customer demand caused by customers’ outsourcing trends. The three key drivers for manufacturers’ service strategies are outsourcing trends, saturation of the installed base, and commoditization in product markets. Thus, manufacturers focus on providing industrial solutions which are delivered through relational processes with customers by using solution-driven business models. In the management of marketing activities, this can be regarded as closer customer relationships, service-dominant business logic, and collaboration in solving customers’ problems. However, there are few studies on comprehensive conceptualizations of a solution offering that include different elements and their roles, especially in the context of capital goods industry. Also the transition process needs further studies in a real life context. This study explores the transition process of an industrial company from product to solution business and, as an aid to managing the solution business, explicates the structure and management of an industrial solution offering. There are two themes, the industrial transition process and industrial solution offering. Regarding the industrial transition process, the aim is to understand the supplier view on the process and its execution and to determine the challenges related to the transition process. The industrial solution offering is discussed by its elements and characteristics, as well as management. Furthermore, a special type of build-own-operate-transfer business model is presented and its suitability in the industrial context analyzed. The study includes findings achieved by qualitative methods and from four case companies. Based on the results, it is tentatively suggested that in the industrial solution business, the transition from product to solution business is not a linear project but an evolving process that varies according to customer needs, which suggests that companies need to possess an ability to develop new business models for different customer needs. The industrial solution offering is dynamic as it evolves in collaboration according to the prevailing and latent customer needs, which suggest restructuring of the organization from a product-centric to a customer-centric one. Furthermore, based on the findings, the concept of industrial solutions is defined as an ongoing relational process to satisfy a customer’s particular business or operational requirements, and the concept of industrial solution offering as an entity comprising the customized goods, services, collaboration, and finance needed to fulfill the industrial solution. Finally, the study offers several managerial implications for industrial managers involved in the transition and management of the solution business and its offering.

Vakavaraisuussääntelyn muutosten vaikutukset paikallispankille

Tutkielman tavoitteena on selvittää muuttuvan pankkisääntelyn vaikutukset vähittäispankkitoimintaa harjoittavalle paikallispankille vakavaraisuuden näkökulmasta. Vaikutuksia vakavaraisuuteen mitataan luottoriskin osalta, sen muodostaessa merkittävimmän osan kohdepankin vakavaraisuusvaatimuksesta. Tarkoituksena on selvittää käytössä olevan standardimenetelmän ja vaihtoehtoisen sisäisten luottoluokitusten menetelmän erot luottoriskin mittaamisessa ja vaikutukset vakavaraisuuteen sekä Basel II että Basel III-säännöksillä mitattuina. Tutkielmassa huomioidaan myös Basel III -säännöksen mukaiset uudet sääntelyinstrumentit ja analysoidaan niiden vaikutusta liiketoimintaan. Sekä Basel II että Basel III -säännöksellä mitattuna sisäisten luottoluokitusten menetelmä paransi kohdepankin vakavaraisuutta. Basel III -säännöksen suurimmat vaikutukset kohdistuivat kohdepankilla omien varojen laatuvaatimuksiin, jotka heikensivät vakavaraisuutta. Laatuvaatimuksista ja nousseista pääomavaatimuksista huolimatta kohdepankin vakavaraisuus säilyi hyvällä ja vaatimukset ylittävällä tasolla. Uusien sääntelyinstrumenttien vaatimukset täyttyivät nykyisellä taserakenteella vähimmäisomavaraisuusasteen ja pysyvän varainhankinnan vaatimuksen osalta. Maksuvalmiusvaatimuksen täyttämiseksi sijoitussalkkuun pitää tehdä muutoksia, minkä odotetaan vaikuttavan heikentävästi kohdepankin tulokseen.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Kaukolämpöakun kannattavuus yhdistetyssä sähkön- ja lämmöntuotannossa

Diplomityön tavoitteena oli tutkia Etelä-Savon Energialle soveltuvan kaukolämpöakun käyttömahdollisuuksia, optimaalista kokoa, sopivinta prosessikytkentää ja investoinnin kannattavuutta. Teoriaosassa käsitellään kirjallisuuden perusteella lämmönvarastoinnin teoriaa sekä investoinninkannattavuuslaskentaa. Soveltavassa osassa määritetään testivuoden sekä lyhytaikaissimuloinnin avulla yritykselle parhaiten sopiva akun tilavuus, kytkentä sekä investoinnin kannattavuus. Teorian ja kannattavuuslaskennan perusteella parhaaksi vaihtoehdoksi valittiin paineistamaton kaukolämpöakku, jonka vesitilavuus on 7 000 m3 ja lataus- ja purkuteho 30 MW. Investoinnin sisäiseksi korkokannaksi saatiin 19,6 %. Investointilaskennan ja herkkyystarkastelun perusteella kaukolämpöakku on kannattava.

Behavioristinen investointitutkimus ja investointilaskentamenetelmien opetus Suomessa

Tämän Pro gradu -tutkielman tavoitteena on selvittää, millaisia menetelmiä Suomen kauppatieteellisissä yksiköissä opetetaan laskentatoimen opiskelijoille investointien kannattavuuden arvioimiseen, ja onko sillä havaittavaa vaikutusta yritysten tosiasialliseen investointikäyttäytymiseen pitkällä aikavälillä. Tutkimusmuotona käytetään laadullista tutkimusmenetelmää. Tutkimuksen teoriaosuudessa esitellään kirjallisuuskatsaus behavioristiseen investointi-tutkimukseen ja empiirinen aineisto puolestaan kerättiin kyselytutkimuksella, jonka kohderyhmänä oli suomalaisissa kauppakorkeakouluissa toimivat laskentatoimen professorit. Tutkimusaineistoa myös syvennettiin puolistrukturoidulla haastattelulla. Tutkimustulosten perusteella havaitaan, että nettonykyarvon käyttö suomalaisissa yrityksissä on lähentynyt kansainvälistä tasoa, mutta reaalioptioiden käyttö on miltei olematonta verrattuna kansainvälisiin käytäntöihin. Suomessa syvällisimmin opetetut investointilaskentamenetelmät ovat nettonykyarvon ja sisäisen korkokannan menetelmät. Tuloksista voidaan päätellä myös, että klassiset investointilaskentamenetelmät, bisnesanalytiikka ja reaalioptiot ovat tärkeä osa laskentatoimen opetusta tulevaisuudessa, mutta syvällisesti reaalioptioihin fokusoitunutta opetusta ei juurikaan ole tällä hetkellä tarjolla.

Regimes cambiais: um modelo alternativo para o Brasil

After the collapse of the Bretton Woods system, many frameworks of exchange rate have been proposed. The aim of this paper is to propose an alternative rule of exchange rate and evaluate the case for Brazil. The analysis of the Brazilian case made necessary the evaluation of auxiliary instruments for its implementation. The paper proposes the use of capital controls or scape clauses.

Uma interpretação das causas da desaceleração econômica do Brasil

The paper aims at explaining why Brazil's GDP growth plunged after 1980. Brazil's GDP grew at 7% yearly from 1940 to 1980 but at only 2.5% per year since then. Increases in the relative price of investment that reduced the purchasing power of savings, associated to declines in the productivity of capital, seem to have been the most important factors behind the observed loss of dynamism. The tentative conclusion is that inward-oriented economic policies since the 1970s and, perhaps, even as early as the 1950s, had negative long-run growth implications that were aggravated by populist policies in the early years of the post-1984 redemocratization.

Organizational creativity – Hegemonic and alternative discourses

SUMMARY Organizational creativity – hegemonic and alternative discourses Over the course of recent developments in the societal and business environment, the concept of creativity has been brought into new arenas. The rise of ‘creative industries’ and the idea of creativity as a form of capital have attracted the interests of business and management professionals – as well as academics. As the notion of creativity has been adopted in the organization studies literature, the concept of organizational creativity has been introduced to refer to creativity that takes place in an organizational context. This doctoral thesis focuses on organizational creativity, and its purpose is to explore and problematize the hegemonic organizational creativity discourse and to provide alternative viewpoints for theorizing about creativity in organizations. Taking a discourse theory approach, this thesis, first, provides an outline of the currently predominant, i.e. hegemonic, discourse on organizational creativity, which is explored regarding themes, perspectives, methods and paradigms. Second, this thesis consists of five studies that act as illustrations of certain alternative viewpoints. Through these exemplary studies, this thesis sheds light on the limitations and taken-for-granted aspects of the hegemonic discourse and discusses what these alternative viewpoints could offer for the understanding of and theorizing for organizational creativity. This study leans on an assumption that the development of organizational creativity knowledge and the related discourse is not inevitable or progressive but rather contingent. The organizational creativity discourse has developed in a certain direction, meaning that some themes, perspectives, and methods, as well as assumptions, values, and objectives, have gained a hegemonic position over others, and are therefore often taken for granted and considered valid and relevant. The hegemonization of certain aspects, however, contributes to the marginalization of others. The thesis concludes that the hegemonic discourse on organizational creativity is based on an extensive coverage of certain themes and perspectives, such as those focusing on individual cognitive processes, motivation, or organizational climate and their relation to creativity, to name a few. The limited focus on some themes and the confinement to certain prevalent perspectives, however, results in the marginalization of other themes and perspectives. The negative, often unintended, consequences, implications, and side effects of creativity, the factors that might hinder or prevent creativity, and a deeper inquiry into the ontology and epistemology of creativity have attracted relatively marginal interest. The material embeddedness of organizational creativity, in other words, the physical organizational environment as well as the human body and its non-cognitive resources, has largely been overlooked in the hegemonic discourse, although thereare studies in this area that give reason to believe that they might prove relevant for the understanding of creativity. The hegemonic discourse is based on an individual-centered understanding of creativity which overattributes creativity to an individual and his/her cognitive capabilities, while simultaneously neglecting how, for instance, the physical environment, artifacts, social dynamics and interactions condition organizational creativity. Due to historical reasons, quantitative as well as qualitative yet functionally- oriented studies have predominated the organizational creativity discourse, although studies falling into the interpretationist paradigm have gradually become more popular. The two radical paradigms, as well as methodological and analytical approaches typical of radical research, can be considered to hold a marginal position in the field of organizational creativity. The hegemonic organizational creativity discourse has provided extensive findings related to many aspects of organizational creativity, although the con- ceptualizations and understandings of organizational creativity in the hegemonic discourse are also in many respects limited and one-sided. The hegemonic discourse is based on an assumption that creativity is desirable, good, necessary, or even obligatory, and should be encouraged and nourished. The conceptualiza- tions of creativity favor the kind of creativity which is useful, valuable and can be harnessed for productivity. The current conceptualization is limited to the type of creativity that is acceptable and fits the managerial ideology, and washes out any risky, seemingly useless, or negative aspects of creativity. It also limits the possible meanings and representations that ‘creativity’ has in the respective discourse, excluding many meanings of creativity encountered in other discourses. The excessive focus on creativity that is good, positive, productive and fits the managerial agenda while ignoring other forms and aspects of creativity, however, contributes to the dilution of the notion. Practices aimed at encouraging the kind of creativity may actually entail a risk of fostering moderate alterations rather than more radical novelty, as well as management and organizational practices which limit creative endeavors, rather than increase their likelihood. The thesis concludes that although not often given the space and attention they deserve, there are alternative conceptualizations and understandings of organizational creativity which embrace a broader notion of creativity. The inability to accommodate the ‘other’ understandings and viewpoints within the organizational creativity discourse runs a risk of misrepresenting the complex and many-sided phenomenon of creativity in organizational context. Keywords: Organizational creativity, creativity, organization studies, discourse theory, hegemony

Por que a poupança externa não promove crescimento

Why foreign saving fail to cause growth. The present paper is a formalization of the critique of the growth with foreign savings strategy. Although medium income countries are capital poor, current account deficits (foreign savings), financed either by loans or by foreign direct investments, will not usually increase the rate of capital accumulation or will have little impact on it in so far as current account deficits will be associated with appreciated exchange rates, artificially increased real wages and salaries and high consumption levels. In consequence, the rate of substitution of foreign savings for domestic savings will be relatively high, and the country will get indebted to consume, not to invest and grow. Only when there are large investment opportunities, stimulated by a sizeable difference between the expected profit rate and the long term interest rate, the marginal propensity to consume will get down enough so that the additional income originated from foreign capital flows will be used for investment rather than for consumption. In this special case, the rate of substitution of foreign for domestic savings tend to be small, and foreign savings will contribute positively to growth.

As razões do laissez-faire: uma análise do ataque ao mercantilismo e da defesa da liberdade econômica na Riqueza das Nações

The reasons of the laissez-faire: an analysis of the attack to mercantilism and of the defense of economic liberty in The Wealth of Nations. The main reasons presented in The Wealth of Nations to advocate the system of economic liberty and reject mercantilism are analyzed. These two systems are evaluated considering basically their impact on the annual product, and the degree of liberty and justice they engender. Based on his views of man and of capital hierarchy, Smith defends the superiority of economic liberty in what concerns the growth of the annual product. This system is also considered superior to mercantilism in terms of justice since it does not privilege any sector of society and allows a great level of liberty to the individuals.