Biovalorização de soro de queijo por processos anaeróbios/aeróbios

Este trabalho abordou a valorização de um subproduto da indústria de lacticínios (soro de queijo) através da alteração do funcionamento de processos habitualmente utilizados no contexto do tratamento biológico. Foi avaliada a fermentação acidogénica deste subproduto para maximizar a conversão do seu elevado teor de matéria orgânica em ácidos orgânicos voláteis (AOV) que actualmente são produtos com elevada procura, nomeadamente para produção de polihidroxialcanoatos (PHA). Em ensaios descontínuos e semi-contínuos foi caracterizada a produção e composição de AOV a partir de soro de queijo variando a razão food-to-microorganism (F/M) e a concentração de alcalinidade. Recorrendo à modelação dos resultados através de superfícies de resposta, demonstrou-se que condições de F/M = 4 gCQO g-1SSV combinadas com uma adição elevada de alcalinidade (8 g L-1 expresso como CaCO3) resultaram na conversão de 72% da CQO alimentada em AOV. O acetato e o butirato foram os AOV predominantes (60%), mas elevadas razões F/M combinadas com elevadas alcalinidades promoveram o alongamento da cadeia carboxílica, tendo sido produzidos AOV de maior massa molecular (iso-valerato e n-caproato). O processo de fermentação acidogénica foi posteriormente desenvolvido em modo contínuo num reactor MBBR acidogénico operado a longo prazo. Cargas orgânicas entre 30 e 50 gCQO L-1d-1 permitiram obter um grau de acidificação máximo de 68% no efluente fermentado. Foi ainda demonstrado que uma adição dinâmica de alcalinidade (0 – 4,8 g CaCO3 L-1) nestas condições estimulou a produção de AOV de cadeia ímpar (propionato e n-valerato) até 42%. O efluente acidificado no processo anaeróbio foi usado como substrato em reactores SBR operados para selecção de culturas microbianas mistas acumuladoras de PHA, nos quais foi aplicado um regime de alimentação dinâmica em condições aeróbias (“fartura-fome”). Estes sistemas operaram também a longo prazo, e demonstraram ser capazes de remover mais de 96% da CQO alimentada e simultaneamente convertê-la em PHA, até 36% do peso celular seco. A velocidade de remoção de substrato (valor máximo de 1,33 gCQO g-1SSV h-1) foi proporcional ao teor de polímero acumulado, evidenciando o estabelecimento de uma fase de “fome” prolongada que estimulou a selecção de microrganismos com elevada capacidade de acumulação de PHA. Além disso, o teor molar de hidroxivalerato (HV) no copolímero produzido [P(HB-co-HV)] foi directamente proporcional ao teor de AOV de cadeia ímpar (propionato e n-valerato) presente no soro fermentado que serviu de substrato. Uma estratégia de operação do reactor SBR com variação da carga orgânica, aliada ao regime “fartura-fome” estabelecido, permitiu ainda simular a realidade dos processos de tratamento biológico de efluentes, nos quais a composição e concentração inicial de matéria orgânica variam frequentemente. Este modo de operação do sistema estimulou notavelmente o processo de selecção de culturas acumuladoras de PHA tendo resultado num aumento da acumulação de PHA de 7% para 36%. Os resultados demonstraram com sucesso a possibilidade de valorização do soro de queijo através de eco-biotecnologia, contribuindo para uma mudança de paradigma no tratamento convencional de efluentes: ao invés de serem eliminados enquanto poluentes, os componentes orgânicos presentes neste subproduto industrial podem assim ser convertidos em materiais de valor acrescentado.

Compósitos CNTs/biocerâmico para a estimulação elétrica óssea in situ

The present thesis aims to develop a biocompatible and electroconductor bone graft containing carbon nanotubes (CNTs) that allows the in situ regeneration of bone cells by applying pulsed external electrical stimuli. The CNTs were produced by chemical vapor deposition (CVD) by a semi-continuous method with a yield of ~500 mg/day. The deposition parameters were optimised to obtain high pure CNTs ~99.96% with controlled morphologies, fundamental requisites for the biomedical application under study. The chemical functionalisation of CNTs was also optimised to maximise their processability and biocompatibility. The CNTs were functionalised by the Diels-Alder cycloaddition of 1,3-butadiene. The biological behaviour of the functionalised CNTs was evaluated in vitro with the osteoblastic cells line MG63 and in vivo, by subcutaneous implantation in rats. The materials did not induce an expressed inflammatory response, but the functionalised CNTs showed a superior in vitro and in vivo biocompatibility than the non-functionalised ones. Composites of ceramic matrix, of bioglass (Glass) and hydroxyapatite (HA), reinforced with carbon nanotubes (CNT/Glass/HA) were processed by a wet approach. The incorporation of just 4.4 vol% of CNTs allowed the increase of 10 orders of magnitude of the electrical conductivity of the matrix. In vitro studies with MG63 cells show that the CNT/Glass/HA composites guarantee the adhesion and proliferation of bone cells, and stimulate their phenotype expression, namely the alkaline phosphate (ALP). The interactions between the composite materials and the culture medium (α-MEM), under an applied electrical external field, were studied by scanning vibrating electrode technique. An increase of the culture medium electrical conductivity and the electrical field confinement in the presence of the conductive samples submerged in the medium was demonstrated. The in vitro electrical stimulation of MG63 cells on the conductive composites promotes the increase of the cell metabolic activity and DNA content by 130% and 60%, relatively to the non-stimulated condition, after only 3 days of daily stimulation of 15 μA for 15 min. Moreover, the osteoblastic gene expression for Runx2, osteocalcin (OC) and ALP was enhanced by 80%, 50% and 25%, after 5 days of stimulation. Instead, for dielectric materials, the stimulus delivering was less efficient, giving an equal or lower cellular response than the non-stimulated condition. The proposed electroconductive bone grafts offer exciting possibilities in bone regeneration strategies by delivering in situ electrical stimulus to cells and consequent control of the new bone tissue formation rate. It is expected that conductive smart biomaterials might turn the selective bone electrotherapy of clinical relevance by decreasing the postoperative healing times.

NMR in the characterization of heavy residual procedural streams

The main objective of this work was to monitor a set of physical-chemical properties of heavy oil procedural streams through nuclear magnetic resonance spectroscopy, in order to propose an analysis procedure and online data processing for process control. Different statistical methods which allow to relate the results obtained by nuclear magnetic resonance spectroscopy with the results obtained by the conventional standard methods during the characterization of the different streams, have been implemented in order to develop models for predicting these same properties. The real-time knowledge of these physical-chemical properties of petroleum fractions is very important for enhancing refinery operations, ensuring technically, economically and environmentally proper refinery operations. The first part of this work involved the determination of many physical-chemical properties, at Matosinhos refinery, by following some standard methods important to evaluate and characterize light vacuum gas oil, heavy vacuum gas oil and fuel oil fractions. Kinematic viscosity, density, sulfur content, flash point, carbon residue, P-value and atmospheric and vacuum distillations were the properties analysed. Besides the analysis by using the standard methods, the same samples were analysed by nuclear magnetic resonance spectroscopy. The second part of this work was related to the application of multivariate statistical methods, which correlate the physical-chemical properties with the quantitative information acquired by nuclear magnetic resonance spectroscopy. Several methods were applied, including principal component analysis, principal component regression, partial least squares and artificial neural networks. Principal component analysis was used to reduce the number of predictive variables and to transform them into new variables, the principal components. These principal components were used as inputs of the principal component regression and artificial neural networks models. For the partial least squares model, the original data was used as input. Taking into account the performance of the develop models, by analysing selected statistical performance indexes, it was possible to conclude that principal component regression lead to worse performances. When applying the partial least squares and artificial neural networks models better results were achieved. However, it was with the artificial neural networks model that better predictions were obtained for almost of the properties analysed. With reference to the results obtained, it was possible to conclude that nuclear magnetic resonance spectroscopy combined with multivariate statistical methods can be used to predict physical-chemical properties of petroleum fractions. It has been shown that this technique can be considered a potential alternative to the conventional standard methods having obtained very promising results.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Sustainable viticulture in Bairrada appellation: vineyard and harvest year effects on grapes oenological potential

The sustainable viticulture of a region passes, among other aspects, for maximizing the varieties potential minimizing subsequent interventions during winemaking, which should contribute to the production of quality wines maintaining their typicity and rationalizing costs. The detailed knowledge of each Appellation specificities, namely vineyard parcel (soil type and topographical peculiarities) and harvest climatic conditions is crucial for sustainability in this sector. Thus, in line with this current trend, the starting point for the development of this PhD thesis was to evaluate the oenological potential of different varieties cultivated throughout Bairrada Appellation (Portugal). During maturation several changes in grape varieties occur, namely berries become sweeter, less acidic, and they develop flavour, aroma and colour properties. The development of these characteristics is essential to define grapes oenological potential, i.e. to estimate the possibility of their usage to produce specific wines. A three years sampling plan was designed to evaluate the effect of harvest year and parcel characteristics on V. vinifera cv. Arinto, Bical, Sauvignon Blanc, Baga, Castelão, Touriga Nacional, and Sousão grapes composition. For each variety, 3 parcels with different characteristics were selected. Several physicochemical parameters were evaluated, during maturation: berry weight, pH, titratable acidity, sugar and phenolic contents, antiradical activity, and volatile composition (free fraction). Special attention was devoted to grapes at technologic maturity, since, besides these parameters, glycosidically-linked fraction was also considered. By using the results obtained at technologic maturity, a comprehensive approach was applied to identify the significance of harvest and parcel characteristics effects on each variety composition. Considering all the parameters under study, it may be highlighted some significant differences. According to the obtained results determined during maturation, it was possible to conclude that Arinto, Bical and Sauvignon Blanc grapes from parcels with clay-sandy and clay-calcareous soils have higher phenolic content and antiradical activity. Otherwise, Sauvignon Blanc presented similar volatile composition for grapes cultivated in the 3 parcels, while Arinto and Bical exhibited higher volatile content in grapes from claysandy and clay-calcareous soils. For Baga, Castelão and Touriga Nacional red varieties, grapes with higher phenolic content, antiradical activity, and volatile content were obtained from clayey and clay-calcareous soils. Furthermore, for Touriga Nacional, parcels altitude seems also to modulate grapes composition. Beyond parcel effect, harvest year conditions also influence grapes composition: 2011 harvest was related with lower phenolic and volatile contents, as well as lower antiradical activity.For grapes collected at technologic maturity, analysis of variance-simultaneous component analysis (ASCA) was applied combining all the parameters under study, in order to assess the influence of harvest and parcel characteristics on each variety oenological potential. The results obtained using this comprehensive approach is closely related with those observed during maturation and revealed that harvest was the main factor that influenced grapes composition (53% to 68% of the total data set variance) followed by parcel characteristics, explaining ca. 15-19% of the total data set variance. The oenological potential of each variety may be different from one parcel to another, i.e., clay-sandy and clay-calcareous related-environments seem to favour Arinto and Bical white grapes composition, but for the red varieties, grapes composition was favoured by clayey and clay-calcareous soils. Besides, also higher altitude seems to favour Touriga Nacional grapes composition. Sauvignon Blanc seems to be a variety well adapted to the different parcel characteristics. In order to go forward in the valuation of these varieties, the aroma properties of 6 monovarietal wines were studied based on an aroma network-approach, linking molecular data related to volatile composition and aroma data about the key odor active molecules. This approach allowed to identify different wine aroma properties and to infer about the consumer’s sensory perception. It was found that aroma properties differ from one wine variety to another: while Arinto and Sauvignon Blanc wine exhibited higher tree fruity, sweety and flowery aromas, related essentially with ester compounds and C13 norisoprenoids, the opposite was obtained for Bical wine, corroborating the aroma sensory perceptions of the trained panel. Sauvignon Blanc also exhibited higher toasted aromas (related with thiols, mainly with 2-methyl-3-furanthiol). Touriga Nacional red wine exhibited higher tree, tropical, and berry fruits notes (sensory described as sweet fruits), toasted and flowery aromas, while these are similar for the other red wines under study. Besides Portuguese Bairrada wines, this aroma network approach is a tool that can be used to explain the aroma properties of wines worldwide. The grape and wine data generated under the present PhD thesis, in the context of Bairrada Appellation, shows the unique character of each variety, and may be used by growers and wine producers as a support for decisionmaking based on objective criteria, increasing the sustainability in this sector. For instance, it is possible to take advantage of the natural resources and produce products with different characteristics obtained from the same variety, minimizing costs during the winemaking process.

Electromechanical properties of engineered lead free potassium sodium niobate based materials

K0.5Na0.5NbO3 (KNN), is the most promising lead free material for substituting lead zirconate titanate (PZT) which is still the market leader used for sensors and actuators. To make KNN a real competitor, it is necessary to understand and to improve its properties. This goal is pursued in the present work via different approaches aiming to study KNN intrinsic properties and then to identify appropriate strategies like doping and texturing for designing better KNN materials for an intended application. Hence, polycrystalline KNN ceramics (undoped, non-stoichiometric; NST and doped), high-quality KNN single crystals and textured KNN based ceramics were successfully synthesized and characterized in this work. Polycrystalline undoped, non-stoichiometric (NST) and Mn doped KNN ceramics were prepared by conventional ceramic processing. Structure, microstructure and electrical properties were measured. It was observed that the window for mono-phasic compositions was very narrow for both NST ceramics and Mn doped ceramics. For NST ceramics the variation of A/B ratio influenced the polarization (P-E) hysteresis loop and better piezoelectric and dielectric responses could be found for small stoichiometry deviations (A/B = 0.97). Regarding Mn doping, as compared to undoped KNN which showed leaky polarization (P-E) hysteresis loops, B-site Mn doped ceramics showed a well saturated, less-leaky hysteresis loop and a significant properties improvement. Impedance spectroscopy was used to assess the role of Mn and a relation between charge transport – defects and ferroelectric response in K0.5Na0.5NbO3 (KNN) and Mn doped KNN ceramics could be established. At room temperature the conduction in KNN which is associated with holes transport is suppressed by Mn doping. Hence Mn addition increases the resistivity of the ceramic, which proved to be very helpful for improving the saturation of the P-E loop. At high temperatures the conduction is dominated by the motion of ionized oxygen vacancies whose concentration increases with Mn doping. Single crystals of potassium sodium niobate (KNN) were grown by a modified high temperature flux method. A boron-modified flux was used to obtain the crystals at a relatively low temperature. XRD, EDS and ICP analysis proved the chemical and crystallographic quality of the crystals. The grown KNN crystals exhibit higher dielectric permittivity (29,100) at the tetragonal-to-cubic phase transition temperature, higher remnant polarization (19.4 μC/cm2) and piezoelectric coefficient (160 pC/N) when compared with the standard KNN ceramics. KNN single crystals domain structure was characterized for the first time by piezoforce response microscopy. It could be observed that <001> - oriented potassium sodium niobate (KNN) single crystals reveal a long range ordered domain pattern of parallel 180° domains with zig-zag 90° domains. From the comparison of KNN Single crystals to ceramics, It is argued that the presence in KNN single crystal (and absence in KNN ceramics) of such a long range order specific domain pattern that is its fingerprint accounts for the improved properties of single crystals. These results have broad implications for the expanded use of KNN materials, by establishing a relation between the domain patterns and the dielectric and ferroelectric response of single crystals and ceramics and by indicating ways of achieving maximised properties in KNN materials. Polarized Raman analysis of ferroelectric potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) single crystals was performed. For the first time, an evidence is provided that supports the assignment of KNN single crystals structure to the monoclinic symmetry at room temperature. Intensities of A′, A″ and mixed A′+A″ phonons have been theoretically calculated and compared with the experimental data in dependence of crystal rotation, which allowed the precise determination of the Raman tensor coefficients for (non-leaking) modes in monoclinic KNN. In relation to the previous literature, this study clarifies that assigning monoclinic phase is more suitable than the orthorhombic one. In addition, this study is the basis for non-destructive assessments of domain distribution by Raman spectroscopy in KNN-based lead-free ferroelectrics with complex structures. Searching a deeper understanding of the electrical behaviour of both KNN single crystal and polycrystalline materials for the sake of designing optimized KNN materials, a comparative study at the level of charge transport and point defects was carried out by impedance spectroscopy. KNN single crystals showed lower conductivity than polycrystals from room temperature up to 200 ºC, but above this temperature polycrystalline KNN displays lower conductivity. The low temperature (T < 200 ºC) behaviour reflects the different processing conditions of both ceramics and single crystals, which account for less defects prone to charge transport in the case of single crystals. As temperature increases (T > 200 ºC) single crystals become more conductive than polycrystalline samples, in which grain boundaries act as barriers to charge transport. For even higher temperatures the conductivity difference between both is increased due to the contribution of ionic conduction in single crystals. Indeed the values of activation energy calculated to the high temperature range (T > 300 ºC) were 1.60 and 0.97 eV, confirming the charge transport due to ionic conduction and ionized oxygen vacancies in single crystals and polycrystalline KNN, respectively. It is suggested that single crystals with low defects content and improved electromechanical properties could be a better choice for room temperature applications, though at high temperatures less conductive ceramics may be the choice, depending on the targeted use. Aiming at engineering the properties of KNN polycrystals towards the performance of single crystals, the preparation and properties study of (001) – oriented (K0.5Na0.5)0.98Li0.02NbO3 (KNNL) ceramics obtained by templated grain growth (TGG) using KNN single crystals as templates was undertaken. The choice of KNN single crystals templates is related with their better properties and to their unique domain structure which were envisaged as a tool for templating better properties in KNN ceramics too. X-ray diffraction analysis revealed for the templated ceramics a monoclinic structure at room temperature and a Lotgering factor (f) of 40% which confirmed texture development. These textured ceramics exhibit a long range ordered domain pattern consisting of 90º and 180º domains, similar to the one observed in the single crystals. Enhanced dielectric (13017 at TC), ferroelectric (2Pr = 42.8 μC/cm2) and piezoelectric (d33 = 280 pC/N) properties are observed for textured KNNL ceramics as compared to the randomly oriented ones. This behaviour is suggested to be due to the long range ordered domain patterns observed in the textured ceramics. The obtained results as compared with the data previously reported on texture KNN based ceramics confirm that superior properties were found due to ordered repeated domain pattern. This study provides an useful approach towards properties improvement of KNN-based piezoelectric ceramics. Overall, the present results bring a significant contribution to the pool of knowledge on the properties of sodium potassium niobate materials: a relation between the domain patterns and di-, ferro-, and piezo-electric response of single crystals and ceramics was demonstrated and ways of engineering maximised properties in KNN materials, for example by texturing were established. This contribution is envisaged to have broad implications for the expanded use of KNN over the alternative lead-based materials.

Evaluation of the matabolic response of osteosarcoma cells to conventional and new anticancer drugs by NMR metabolomics

The main scope of this work was to evaluate the metabolic effects of anticancer agents (three conventional and one new) in osteosarcoma (OS) cells and osteoblasts, by measuring alterations in the metabolic profile of cells by nuclear magnetic resonance (NMR) spectroscopy metabolomics. Chapter 1 gives a theoretical framework of this work, beginning with the main metabolic characteristics that globally describe cancer as well as the families and mechanisms of action of drugs used in chemotherapy. The drugs used nowadays to treat OS are also presented, together with the Palladium(II) complex with spermine, Pd2Spm, potentially active against cancer. Then, the global strategy for cell metabolomics is explained and the state of the art of metabolomic studies that analyze the effect of anticancer agents in cells is presented. In Chapter 2, the fundamentals of the analytical techniques used in this work, namely for biological assays, NMR spectroscopy and multivariate and statistical analysis of the results are described. A detailed description of the experimental procedures adopted throughout this work is given in Chapter 3. The biological and analytical reproducibility of the metabolic profile of MG-63 cells by high resolution magic angle spinning (HRMAS) NMR is evaluated in Chapter 4. The metabolic impact of several factors (cellular integrity, spinning rate, temperature, time and acquisition parameters) on the 1H HRMAS NMR spectral profile and quality is analysed, enabling the definition of the best acquisition parameters for further experiments. The metabolic consequences of increasing number of passages in MG-63 cells as well as the duration of storage are also investigated. Chapter 5 describes the metabolic impact of drugs conventionally used in OS chemotherapy, through NMR metabolomics studies of lysed cells and aqueous extracts analysis. The results show that MG-63 cells treated with cisplatin (cDDP) undergo a strong up-regulation of lipid contents, alterations in phospholipid constituents (choline compounds) and biomarkers of DNA degradation, all associated with cell death by apoptosis. Cells exposed to doxorubicin (DOX) or methotrexate (MTX) showed much slighter metabolic changes, without any relevant alteration in lipid contents. However, metabolic changes associated with altered Krebs cycle, oxidative stress and nucleotides metabolism were detected and were tentatively interpreted at the light of the known mechanisms of action of these drugs. The metabolic impact of the exposure of MG-63 cells and osteoblasts to cDDP and the Pd2Spm complex is described in Chapter 6. Results show that, despite the ability of the two agents to bind DNA, the metabolic consequences that arise from exposure to them are distinct, namely in what concerns to variation in lipid contents (absent for Pd2Spm). Apoptosis detection assays showed that, differently from what was seen for MG-63 cells treated with cDDP, the decreased number of living cells upon exposure to Pd2Spm was not due to cell death by apoptosis or necrosis. Moreover, the latter agent induces more marked alterations in osteoblasts than in cancer cells, while the opposite seemed to occur upon cDDP exposure. Nevertheless, the results from MG-63 cells exposure to combination regimens with cDDP- or Pd2Spm-based cocktails, described in Chapter 7, revealed that, in combination, the two agents induce similar metabolic responses, arising from synergy mechanisms between the tested drugs. Finally, the main conclusions of this thesis are summarized in Chapter 8, and future perspectives in the light of this work are presented.

A Agenda 21 local e o desenvolvimento sustentável em Portugal : que perspetivas?

Assumindo a sociedade atual o paradigma do desenvolvimento sustentável como modelo capaz de garantir uma gestão equilibrada dos recursos atuais que não comprometa o futuro das futuras gerações, é fundamental compreender o instrumento da Agenda 21 Local (A21L), ferramenta saída da Conferência do Rio, em 1992, que se apresenta como uma resposta internacional aos objetivos da sustentabilidade. Ao constituir-se como país signatário da Declaração do Rio, Portugal assumiu o compromisso de cooperar internacionalmente para a aplicação deste instrumento, no esforço comum de unir a proteção do ambiente com o desenvolvimento económico e social. Verifica-se que a resposta de Portugal, em matéria de A21L, foi pouco conseguida, marcada por um arranque ténue, desconcertado e disperso a que acresce o caráter dúbio que caracterizou a natureza dos primeiros processos e que, no quadro internacional, atira Portugal para o grupo de países europeus que mais tardiamente conseguiram responder ao apelo da comunidade internacional no que se refere à implementação de A21L. Neste âmbito, esta dissertação visa aprofundar o conhecimento cientifico sobre este instrumento no quadro das experiências de Agenda 21 Local implementadas no território português. O trabalho procurou examinar os objetivos, características e resultados dos processos de Agenda, dando atenção aos elementos individuais que marcaram cada um e, igualmente, avaliando as repercussões que estes tiveram no todo nacional. O estudo incidiu na dinâmica espaciotemporal das Agendas21L, no território nacional, e na análise integrativa de indicadores físicos, sociais e económicos que permitiram compreender as especificidades e os contrastes verificados nos processos implementados e desenvolvidos. Na investigação não foram, igualmente, negligenciadas questões históricas, políticas e culturais, sabendose da importância que estes vários domínios configuram no caso português. O trabalho contou com uma investigação assente na seguinte metodologia: i) Revisão da literatura e recolha de dados bibliográficos sobre a temática da Agenda 21 Local; ii) Levantamento de informação, através de um inquérito por questionário, dirigido a todas as localidades do País, onde decorrem Agendas 21 Local, a fim de complementar informação já processada; iii) Pesquisa direta de dados no terreno que envolveu a utilização de procedimentos de teor quantitativo (inquérito por questionário) e de teor qualitativo (entrevistas), relativamente ao caso de estudo (Agenda 21 Local de Mindelo); iv) Tratamento e análise dos resultados obtidos através da confrontação da perspetiva teórica com a prática com a consequente elaboração de conclusões fundamentadas pela confrontação dos dados com as hipóteses. Para além de se tratar do caso pioneiro de A21L com início no poder mais próximo do cidadão (respeitando um dos princípios inerentes a este instrumento – o princípio da subsidiariedade), afirmou-se, igualmente, como um caso de referência em matéria de coesão e mobilização dos cidadãos locais para os problemas locais existentes. Os resultados empíricos da investigação identificam uma série de dificuldades que condicionaram o arranque e progresso das A21L. Desde logo, a inabilidade dos poderes políticos locais em trabalharem com um modelo que rompe com as típicas e tradicionais formas pré-concebidas de fazer política, isto é, com as práticas instituídas dos políticos fazerem “política” para os cidadãos e não “com” os cidadãos. O próprio desconhecimento do poder político local quanto à natureza de um processo de A21L que evidenciou inaptidão, impreparação e até embaraço para lidar com este instrumento, resultando na necessidade, na grande maioria dos processos desenvolvidos, de serem acompanhados por entidades externas que cooperaram na sua dinamização. Acresce que a nova dinâmica, subjacente à A21L, que desafia os governos locais a mobilizar a participação generalizada dos cidadãos e apela à participação de novos atores (associações, grupos de interesse, ONG e atores sociais, em geral) para a definição de estratégias de desenvolvimento local, não é totalmente aceite pelos vários poderes locais que, não raras vezes, menosprezam a importância dos cidadãos nos momentos de tomada de decisão. A falta de empenho do governo central, em matéria de sustentabilidade, que negligenciou, numa primeira etapa, a figura do poder central na assessoria às entidades locais cerceou o país da existência de uma campanha nacional para a afirmação deste instrumento. A falta/insuficiência de recursos financeiros como resultante da ausência de apoios estatais e a dificuldade na obtenção de fundos da União Europeia configurou-se como um entrave à promoção dos processos ficando as entidades locais e regionais incapazes de ultrapassar a falta de meios imprescindíveis para o desenvolvimento da A21L. O próprio desconhecimento generalizado dos cidadãos sobre a A21L afigura-se como um estigma ao sucesso de qualquer processo com as caraterísticas de um instrumento A21L visto que a participação dos cidadãos é condição sine qua non para a sua operacionalização. Neste quadro, e olhando o futuro, urge a necessidade das autoridades locais criarem modelos de autofinanciamento capazes de garantir a criação, funcionamento e manutenção de infraestruturas económicas e sociais subjacentes aos programas de A21L, assim como o dever do poder político em reforçar a importância da função da informação e da mobilização dos cidadãos em prole do desenvolvimento sustentável, ações indispensáveis para a execução das políticas inerentes à A21L.

Diopside-fluorapatite-wollastonite based bioactive glasses and glass-ceramics

Bioactive glasses and glass–ceramics are a class of biomaterials which elicit special response on their surface when in contact with biological fluids, leading to strong bonding to living tissue. This particular trait along with good sintering ability and high mechanical strength make them ideal materials for scaffold fabrication. The work presented in this thesis is directed towards understanding the composition-structure-property relationships in potentially bioactive glasses designed in CaOMgOP2O5SiO2F system, in some cases with added Na2O. The main emphasis has been on unearthing the influence of glass composition on molecular structure, sintering ability and bioactivity of phosphosilicate glasses. The parent glass compositions have been designed in the primary crystallization field of the pseudo-ternary system of diopside (CaO•MgO•2SiO2) – fluorapatite (9CaO•3P2O5•CaF2) – wollastonite (CaO•SiO2), followed by studying the impact of compositional variations on the structure-property relationships and sintering ability of these glasses. All the glasses investigated in this work have been synthesized via melt-quenching route and have been characterized for their molecular structure, sintering ability, chemical degradation and bioactivity using wide array of experimental tools and techniques. It has been shown that in all investigated glass compositions the silicate network was mainly dominated by Q2 units while phosphate in all the glasses was found to be coordinated in orthophosphate environment. The glass compositions designed in alkali-free region of diopside – fluorapatite system demonstrated excellent sintering ability and good bioactivity in order to qualify them as potential materials for scaffold fabrication while alkali-rich bioactive glasses not only hinder the densification during sintering but also induce cytotoxicity in vitro, thus, are not ideal candidates for in vitro tissue engineering. One of our bioglass compositions with low sodium content has been tested successfully both in vivo and in preliminary clinical trials. But this work needs to be continued and deepened. The dispersing of fine glass particles in aqueous media or in other suitable solvents, and the study of the most important factors that affect the rheology of the suspensions are essential steps to enable the manufacture of porous structures with tailor-made hierarchical pores by advanced processing techniques such as Robocasting.

Oxidation and glycoxidation of phosphatidylserine and their effect in immune response : a lipidomic approach

Phosphatidylserine (PS) is a member of the class of phospholipids, and is distributed among all cells of mammalians, playing important roles in diverse biological processes, including blood clotting and apoptosis. When externalized, PS is a ligand that is recognized on apoptotic cells. It has been considered that before externalization PS is oxidized and oxPS enhance the recognition by macrophages receptors, however the knowledge about oxidation of PS is still limited. PS, like others phospholipids, has two fatty acyl chains and one polar head group, in this case is the amino acid serine. The modifications in PS structure can occur by oxidation of the unsaturated fatty acyl chains and by glycation of the polar head group, due to free amine group, thus increasing the susceptibility to oxidative events. The main goal of this work was to characterize and identify oxidized and glycoxidized PS, contributing to the knowledge of the biological role of oxidation products of PS, as well as of glycated PS, in immune and inflammatory processes. To achieve this goal, PS standards (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho- L-serine (POPS), 1,2-dipalmitoyl-sn-glycero-3-phospho-L-serine (DPPS), 1- palmitoyl-2-linoleoyl-sn-glycero-3-phospho-L-serine (PLPS) and 1-palmitoyl-2- arachidonoyl-sn-glycero-3-phospho-L-serine (PAPS)) and glycated PS (PAPS and POPS) were induced to oxidize in model systems, using different oxidant reagents: HO• and 2,2'-azobis-2-methyl-propanimidamide dihydrochloride (AAPH) . The detailed structural characterization of the oxidative products was performed by ESI-MS and MS/MS coupled to separation techniques such as off line TLC-MS and on line LC-MS, in order to obtained better characterization of the larger number of PS and glycated PS oxidation products. The results obtained in this work allowed to identify several oxidation products of PS and glycated PS with modifications in unsaturated fatty acyl chain. Also, oxidation products formed due to structural changes in the serine polar head with formation of terminal acetamide, terminal hydroperoxyacetaldehyde.and terminal acetic acid (glycerophosphacetic acid, GPAA) were identified. The mass spectrometric specific fragmentation pathway of each type of oxidation product was determined using different mass spectrometry approaches. Based on the identified fragmentation pathways, targeted lipidomic analysis was performed to detect oxidation products modified in serine polar head in HaCaT cell line treated with AAPH. The GPAA was detected in HaCaT cells treated with AAPH to induce oxidative stress, thus confirming that modifications in PS polar head is possible to occur in biological systems. Furthermore, it was found that glycated PS species are more prone to oxidative modifications when compared with non glycated PS. During oxidation of glycated PS, besides the oxidation in acyl chains, new oxidation products due to oxidation of the glucose moiety were identified, including PS advanced glycation end products (PSAGES). To investigate if UVA oxidative stress exerted changes in the lipidome of melanoma cell lines, particularly in PS profile, a lipidomic analysis was performed. The lipid profile was obtained using HILIC-LC-MS and GC-MS analysis of the total lipid extracts obtained from human melanoma cell line (SKMEL- 28) after UVA irradiation at 0, 2 and 24 hours. The results did not showed significant differences in PS content. At molecular level, only PS (18:0:18:1) decreased at the moment of irradiation. The most significant changes in phospholipids content occurred in phosphatidylcholines (PC) and phosphatidylinositol (PI) classes, with an increase of mono-unsaturated fatty acid (MUFA), similarly as observed for the fatty acid analysis. Overall, these data indicate that the observed membrane lipid changes associated with lipogenesis after UVA exposure may be correlated with malignant transformations associated with cancer development and progression. Despite of UVA radiation is associated with oxidative damage, in this work was not possible observe oxidation phospholipids. The anti/pro-inflammatory properties of the oxidized PLPS (oxPLPS) versus non-oxidized PLPS were tested on LPS stimulated RAW 264.7 macrophages. The modulation of intracellular signaling pathways such as NF-kB and MAPK cascades by oxPLPS and PS was also examined in this study. The results obtained from evaluation of anti/pro-inflammatory properties showed that neither PLPS or oxPLPS species activated the macrophages. Moreover only oxidized PLS were found to significantly inhibit NO production and iNOS and il1β gene transcription induced by LPS. The analysis at molecular level showed that this was the result of the attenuation of LPS-induced c-Jun-N-terminal kinase (JNK) and p65 NF-kB nuclear translocation. Overall these data suggest that oxPLPS, but not native PLPS, mitigates pro-inflammatory signaling in macrophages, contributing to containment of inflammation during apoptotic cell engulfment. The results obtained in this work provides new information on the modifications of PS, facilitating the identification of oxidized species in complex samples, namely under physiopathologic conditions and also contributes to a better understanding of the role of oxPS and PS in the inflammatory response, in the apoptotic process and other biological functions.

Degradação do perfil bioquímico de um concentrado de Nannochloropsis sp. durante o seu período de validade

As algas do género Nannochloropsis são microalgas marinhas que apresentam um perfil bioquímico único, principalmente no que é respeitante a lípidos, e uma vasta gama de compostos bioativos que possibilitam a sua aplicabilidade comercial em várias áreas biotecnológicas, destacando-se a alimentação e nutrição humana, indústria cosmética e farmacêutica, produção de biocombustíveis e a sua utilização em aquacultura. Em aquacultura, são usadas maioritariamente microalgas vivas, cuja produção representa elevados custos. Tem havido assim uma pesquisa de dietas alternativas, entre as quais os concentrados de microalgas se apresentam promissores. Os desafios atuais das empresas produtoras de concentrados de microalgas prendem-se com a conservação e armazenamento destes concentrados. Assim, neste trabalho foi proposto o estudo da influência da refrigeração, congelação e adição de conservantes a PhytoBloom Green Formula®, concentrado de Nannochloropsis sp. comercializado pela empresa Necton S.A., com o objetivo de averiguar a variação de parâmetros bioquímicos e organoléticos com a exposição do concentrado aos diferentes métodos de conservação. Pretendia-se assim observar se estes processos podem ser usados para aumentar o tempo de prateleira do concentrado em estudo. Para tal, foram avaliadas amostras recolhidas em três pontos temporais e analisados os seguintes parâmetros: perfil de ácidos gordos, quantificação de hidroperóxidos lipídicos, quantificação espectrofotométrica de clorofila a e carotenóides, bem como parâmetros organoléticos. Inicialmente, foi efetuada uma avaliação de diferentes parâmetros organoléticos, não se observando variações relevantes entre amostras das diferentes condições. Assim, foi posteriormente realizada a avaliação bioquímica. Primeiramente, foi efetuada a quantificação de ácidos gordos por GC-FID das diferentes amostras, nas quais não se observou diferenças significativas entre as condições experimentais. Foi também efetuado um ensaio de FOX II, que permitiu avaliar o grau de peroxidação lipídica de cada amostra por quantificação de hidroperóxidos lipídicos formados. As amostras nas quais houve adição de conservantes apresentaram um teor menor de hidropéroxidos lipídicos, permitindo inferir que a ação dos conservantes com propriedades antioxidantes permitiu uma melhor conservação da amostra. Quando se determinou a concentração de clorofila a e de carotenóides verificou-se que, em ambos os casos, a congelação conduziu a uma estabilização da concentração destes pigmentos. No entanto, os melhores resultados foram obtidos usando a combinação de congelação com adição de conservantes. Estes resultados, embora promissores, carecem de uma confirmação por um novo estudo, completando com análises com maior rigor e sensibilidade associados, no sentido de se verificar qual o método mais vantajoso para a extensão do tempo de prateleira de PhytoBloom Green Formula®.

Degradação do perfil bioquímico de um concentrado de Nannochloropsis sp. durante o seu período de validade

As algas do género Nannochloropsis são microalgas marinhas que apresentam um perfil bioquímico único, principalmente no que é respeitante a lípidos, e uma vasta gama de compostos bioativos que possibilitam a sua aplicabilidade comercial em várias áreas biotecnológicas, destacando-se a alimentação e nutrição humana, indústria cosmética e farmacêutica, produção de biocombustíveis e a sua utilização em aquacultura. Em aquacultura, são usadas maioritariamente microalgas vivas, cuja produção representa elevados custos. Tem havido assim uma pesquisa de dietas alternativas, entre as quais os concentrados de microalgas se apresentam promissores. Os desafios atuais das empresas produtoras de concentrados de microalgas prendem-se com a conservação e armazenamento destes concentrados. Assim, neste trabalho foi proposto o estudo da influência da refrigeração, congelação e adição de conservantes a PhytoBloom Green Formula®, concentrado de Nannochloropsis sp. comercializado pela empresa Necton S.A., com o objetivo de averiguar a variação de parâmetros bioquímicos e organoléticos com a exposição do concentrado aos diferentes métodos de conservação. Pretendia-se assim observar se estes processos podem ser usados para aumentar o tempo de prateleira do concentrado em estudo. Para tal, foram avaliadas amostras recolhidas em três pontos temporais e analisados os seguintes parâmetros: perfil de ácidos gordos, quantificação de hidroperóxidos lipídicos, quantificação espectrofotométrica de clorofila a e carotenóides, bem como parâmetros organoléticos. Inicialmente, foi efetuada uma avaliação de diferentes parâmetros organoléticos, não se observando variações relevantes entre amostras das diferentes condições. Assim, foi posteriormente realizada a avaliação bioquímica. Primeiramente, foi efetuada a quantificação de ácidos gordos por GC-FID das diferentes amostras, nas quais não se observou diferenças significativas entre as condições experimentais. Foi também efetuado um ensaio de FOX II, que permitiu avaliar o grau de peroxidação lipídica de cada amostra por quantificação de hidroperóxidos lipídicos formados. As amostras nas quais houve adição de conservantes apresentaram um teor menor de hidropéroxidos lipídicos, permitindo inferir que a ação dos conservantes com propriedades antioxidantes permitiu uma melhor conservação da amostra. Quando se determinou a concentração de clorofila a e de carotenóides verificou-se que, em ambos os casos, a congelação conduziu a uma estabilização da concentração destes pigmentos. No entanto, os melhores resultados foram obtidos usando a combinação de congelação com adição de conservantes. Estes resultados, embora promissores, carecem de uma confirmação por um novo estudo, completando com análises com maior rigor e sensibilidade associados, no sentido de se verificar qual o método mais vantajoso para a extensão do tempo de prateleira de PhytoBloom Green Formula®.

Estudo da variação da abundância e diversidade de procariotas em sedimentos subsuperficiais marinhos

Os sedimentos marinhos subsuperficiais profundos são, atualmente, um ambiente ainda pouco conhecido do ponto de vista microbiológico, nomeadamente quanto aos processos metabólicos que nele têm lugar e quanto à sua possível influência nos ciclos biogeoquímicos. O acesso a amostras colhidas em sedimentos profundos, particularmente no âmbito dos programas IODP (International Ocean Discovery Program) e ECORD (European Consortium for Ocean Research Drilling) tem permitido recolher informação sobre a estrutura das comunidades de procariotas bem como sobre alguns dos fatores que regulam a sua distribuição e atividade. Este estudo teve como objetivo caracterizar a distribuição e a diversidade estrutural das comunidades de procariotas em sedimentos subsuperficiais profundos colhidos no Arco Izu-Bonin-Mariana, no mar das Filipinas, com recurso a métodos independentes de cultivo (PCR-DGGE) e à contagem de células por microscopia de epifluorescência. Os resultados apontam para a existência de comunidades de Bacteria e Archaea diversas. Os valores do índice de diversidade de Shannon-Weaver (H’) calculados com base nos perfis de DGGE (Bacteria) foram significativamente mais elevados (3,035 – 1,971) nas camadas superficiais (< 140 mafm) do que nos sedimentos (2,519 - 1,049) correspondentes a profundidades superiores entre 163 e 879 mafm. A abundância máxima (8,66 x 106 células.gps-1) foi registada à profundidade de 67 mafm e valor mínimo (2,26 x 106 células.gps-1) foi observado em amostras colhidas a 879 mafm de profundidade. Abundância e diversidade apresentaram correlação negativa com a profundidade e com o teor de sulfato. Os resultados indicam que ao longo da coluna de sedimento se estabelecem comunidades de procariotas estruturalmente diferentes e adaptadas ao ambiente geoquímico prevalecente, nomeadamente em termos dos aceitadores de eletrões disponíveis. O estudo do microbioma destas amostras representativas do ambiente sedimentar subsuperficial profundo será continuado e detalhado, com recurso a técnicas de sequenciação avançada.

Novas fontes de antioxidantes e inibidores de enzimas relevantes para o tratamento da diabetes mellitus tipo 2 e doença de Alzheimer

Dissertação de mest., Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2009

Estudo da recuperação da deficiência de ferro em plantas de morangueiro (Fragaria x ananassa Duch.) numa perspectiva sustentável

Consulta interdita até nova indicação