Esimiehen ydinkompetenssit tuloksen ja työtyytyväisyyden selittäjänä – Case S-market

Työn tarkoituksena on kehittää suorittavalle esimiestasolle työkalu, millä voidaan mitata esimiehen kompetensseja. S-market esimiehen ydinosaamiset työssä jakautuvat kahteen kokonaisuuteen vuorovaikutus- ja ketjuyksikön johtamiseen. Työn tavoitteena on myös tarkastella millä esimiehen ydinosaamisella on merkitystä työtyytyväisyyteen ja yrityksen tulokseen. Tutkimus on kvantitatiivinen ja sen aineisto on verkkokyselylomakkeen avulla kerätystä 129 vastauksesta. Verkkokyselylomakkeen väittämät ovat rakennettu esimiestyön kompetensseista, jotka pohjautuvat tutkielman teoriaan. Verkkokyselyn, työtyytyväisyyden ja tuloksen lukuarvot on analysoitu tilastollisella tulostenkäsittelyohjelmalla, SPSS:llä. Työtyytyväisyystulokset ovat koottu tutkimukseen osallistuneen viidentoista S-marketin työtyytyväisyystutkimuksen tuloksista vuodelta 2008. Tuloksen mittareina tutkielmassa on käytetty samojen S-markettien työtehokkuutta ja toimintakateprosenttia vuodelta 2008. Työn tulokset vahvistivat sen, että esimiestyöllä on suora syy-seuraussuhde työtyytyväisyyteen ja tuloksellisuuteen. Tutkimustuloksien perusteella esimieskäyttämisen vaikutus työtyytyväisyyden kokemiseen on vahva. Hyvällä vuorovaikutusjohtamisella tuloksien perusteella oli vaikutusta työtyytyväisyyteen. Tuloksista kävi ilmi, että työtyytyväisyyteen esimiehen kompetensseista eniten vaikuttivat yksilöllinen huomiointi, tavoitteisiin kannustaminen ja motivointi sekä asiakaslähtöisyys. Tuloksen mittareihin eniten vaikutti tulos- ja tavoitejohtaminen. Tuloksellisuuteen vaikuttavat tutkimuksen mukaan esimiehen jämäkkä ja vaativa tavoitteisiin ohjaava toiminta sekä päätöksenteko ja organisointikyky. Tarkempien ja täsmällisimpien S-market esimiehen kompetenssien löytämiseksi kehitysehdotuksena tutkielmassa on laajemman tutkimusaineiston käsittely neljän faktorin avulla.

Economics of combined power plant and pyrolysis bio-oil production

There are reasons of necessity in bio-fuel use and bio-energy fast development. It includes the material about bio-energy technologies, applications and methods. There are basic thermodynamics and economic theories. The economic calculation presents the comparison between two combinations. There are boiler plant below 20 MW in combination with ablative pyrolysis plant for bio-oil production and CHP plant below 100 MW in combination with the RTP pyrolysis bio-oil production technology. It provides a material about wood chips and bio-oil characteristics and explains it nature, presents the situation around the bio-fuel market or bio-fuel trade. There is a description of pyrolysis technologies such as ablative and RTP. The liquid product of the pyrolysis processes is bio-oil. The bio-oil could be different even of the same production process, because of the raw material nature and characteristics. The calculation shows advantages and weaknesses of combinations and obtained a proof of suppositions. The next thing, proven by this work is the fact that to get more efficiency from energy project it is good possibility to built plants in combinations.

Perspectives for the production and usage of wood chips as a source of energy in the North-West of Russia

The development of bioenergy on the basis of wood fuels has received considerable attention in the last decades. The combination of large forest resources and reliance on fossil fuels makes the issue of wood chips usage in Russia an actual topic for the analysis. The main objective of this study is to disclose the current state and perspectives for the production of wood chips and their usage as a source of energy in the North-West of Russia. The study utilizes an integrated approach to explore the market of wood chips on the basis of comprehensive analysis of documentation and expert opinions. The analysis of wood chips market was performed for eight regions of the North-West district of Russia within two major dimensions: its current state and perspectives in the nearest five years. The results of the study show a comprehensive picture of the wood chips market, including the potential for wood chips production, the specific features of production and consumption and the perspectives for the market development within the regions of the North-West district of Russia. The study demonstrated that the market of wood chips is underdeveloped in the North-West of Russia. The findings of the work may be used by forest companies for the strategic planning.

Rukoile ja työtä tee. Onni Puhakan kehitys innovaattorista oman tien kulkijaksi

Pray and work. The development of Onni Puhakka: from innovator to nonconformist This ethnological biographical study examines the modernization which began in the mid-1800s, continued into the mid-1900s, and has changed Finnish society in many ways. This era has been studied on a general level quite extensively, but this work explores the life and everyday experiences of Onni Puhakka (1870−1955), a farmer who spent most of his life in the town of Liperi. The goal is to find new perspectives on the development of the modernization process in society through the experiences of an individual. In this study, a central theme is the rural co-operative movement represented in Finland by Pellervo as well as its development in this country and as a significant undertaking in Onni Puhakka’s life. The co-operative movement was one of the most significant sectors affecting modernization in rural communities. The main character in the study is the grandfather of the present author, and thus this research belongs to the newly accepted ethnological research tradition of studying one’s own community. Written documents, mainly collected and preserved by Onni Puhakka himself during his lifetime, form the research material. The material consists mainly of Puhakka’s extensive correspondence, personal notes and diaries, documents related to his farm, and photographs taken by him. Earlier research and other written material examining the general development of the period were used to provide a background for the study. The co-operative movement formed a comprehensive ideology for Onni Puhakka, in which the possibilities for the development of both individuals and the community were combined. His life was based on a religious conviction, and he felt that the co-operative movement was the application of Christian love for one’s neighbour in practice. At the beginning of his active working career, Puhakka was an innovator, a reformer at the forefront of progress, but quite soon he became a sworn critic of the development of the co-operative movement in particular. One of Puhakka’s criticisms of the co-operative movement was the shifting of decision-making power to professional managers and central organizations, far from the reach of local actors. A fundamental reason for his dissatisfaction was the development within the co-operative movement in which the ideological background was forgotten, and economic goals and making a profit took an excessive significance. This assessment of the co-operative movement made by Onni Puhakka and his predictions about its development were not unfounded. This has been shown by several studies examining the development of both the Pellervo and working class cooperative movements. The professionalization of management, managerialism, as well as the direct links between professional managers of local co-operatives and central organizations have lead to the situation in which fewer and fewer people make the decisions, and management has as its goal economic success and growth. Co-operative enterprises that have grown in size have become estranged from the everyday life of their members. Instead of taking care of relations with the membership of the co-op, competitive ability and the market share have become the most important concerns of the management. As the membership has become alienated, their interest in large-scale co-ops has also become largely economic. A significant change among the membership of the Pellervo movement occurred at the stage when the co-operative movement shifted from rural areas to urban centres. This meant that the commitment of the membership became much looser than it had been in the farmers’ production and consumer co-ops. From the point of view of its members, the nature of the co-operative movement has become diametrically opposed to its point of departure: the active members who previously formed the subject of the co-operative movement have become the object of the economic activities of that same movement. The co-operative movement has been transformed from the progressive agent of change of its early years into a business activity which no longer has any significant task as a social reformer. This study confirms the observations of the latest research on modernization which states that modernization has not been a straightforward and inevitable development that has lead to the present situation. For example, the criticism directed by Puhakka toward the co-operative movement includes information that shows that a few others who were initially actively involved also criticized the development of the movement. Despite his occasional frustration, Onni Puhakka continued his criticism and attempts to get the co-operative movement to change its course and return to its ‘roots’. In the early years of the cooperative movement he probably did not differ much from the other pioneers in the sense that many of them had adopted and internalized the same values and motive for being involved that he had. However, Puhakka differed from his colleagues in the sense that he was able to believe in what he called the “fundamental values” of the co-operative movement longer than many of them.

Production of a product similar to gelatin from chicken feet collagen

Chicken feet can be used as an alternative source of collagen for the development of new products. In this sense, the aim of this study was the production of a product similar to gelatin from collagen extracted from chicken feet and the evaluation of sensory quality. The products were produced in two distinct flavors, with grape flavor called GU and pineapple flavor called GA. Subsequently, we compared these formulations with gelatin of a trademark established in the market. We used in the verification of sensory acceptability of products a hedonic scale of 9 points and the availability of consuming the product by 30 untrained tasters. According to the results, all formulations showed good levels of acceptability, indicating the collagen from chicken feet as an alternative source of high quality in the production of gelatin.

Energy demand in citrus production under varied operational efficiency values

Citrus orchards are very important in Brazil, especially in São Paulo State, where occupy an area of 600,000 ha approximately. To identify sustainability degree of citrus production system, an energy analysis allows evaluating efficiency of direct and indirect applied inputs. Thus, this study aimed to evaluate citrus production system under energetic point of view, in which invested energy is paid back with citrus production; being compared within three scenarios for operational field efficiency. As result, by sensitivity analysis was determined that fuel was the main energy demander, followed by pesticides and fertilizers. In operational work capacity analysis, all combinations between efficiency (minimum, typical and maximum) and yield levels became positive in the seventh year, except for the combination minimum efficiency and 10 % less yield, positive in the eighth year. The best combination (maximum efficiency and 10 % more yield) has promoted investment payoff around the sixth and seventh year. By this study, it is possible to determine the total energy demand to produce citrus and indentify the applied inputs that need more attention by the decision-makers. Labor and seedlings can be ommited for further studies with citrus, since they were irrelevant. Management of agricultural machinery may pose an important role on decreasing environmental impact of citrus production.

Strategic alliances as an international entry strategy: Finnish cleantech SMEs and the Indian market

The demand for environmental technologies, also called cleantech, is growing globally but the need is especially high in emerging markets such as India where the rising economy and rapid industrialisation have led to increasing energy needs and environmental degradation. The market is of great potential also for the Finnish cleantech cluster that represents advanced expertise in several fields of environmental technologies. However, most of the Finnish companies in the field are SMEs that face challenges in their internationalisation due to their limited resources. The objective of this study was to estimate, whether strategic alliances could be an efficient entry strategy for Finnish cleantech SMEs entering the Indian market. This was done by studying what are the key factors influencing the international entry mode decision of Finnish cleantech SMEs, what are the major factors affecting the entry of Finnish cleantech SMEs to the Indian market and how do Finnish cleantech SMEs use strategic alliances in their internationalisation process. The study was realised as a qualitative multi-case study through theme interviews of Finnish cleantech SME representatives. The results indicated that Finnish cleantech SMEs prefer to enter international markets through non-equity and collaborative modes of entry. These entry modes are chosen because of the small size and limited resources of companies, but also because they want to protect their innovative technologies from property rights violations. India is an attracting market for Finnish cleantech SMEs mainly because of its size and growth, but insufficient environmental regulation and high import tariffs have hindered entry to the market. Finnish cleantech SMEs commonly use strategic alliances in their internationalisation process but the use is rather one-sided. Most of the formed strategic alliances are low-commitment, international contractual agreement in sales and distribution. Alliance partner selection receives less attention. In the future, providing Finnish cleantech SMEs with international experience and training could help in diversifying the use of strategic alliances and increase their benefits to SME internationalisation.

Public and Private Sector Decision Makers Within the Rail Baltica Growth Corridor

Transport volumes have increased and will continue to increase in European Union. Even though the growth has not been equal between different transport modes. Most of the growth has been faced on road transport. European Union aims to balance the unbalanced market shares between the modes by gaining and supporting the competitiveness of railway and waterway transport. In EU railway transportation is seen as solution to increase safety in traffic and decrease the environmental impacts of transportation. The aim of this research is to figure out how it is possible to decrease the environmental impacts by the technology already in use. Main focus of this research is in intermodality and combining the road and railway transportation. This study aims also to figure out demands and expectations towards new Rail Baltica railway route connecting Tallinn and Berlin. The research is conducted by performing a literature review about decreasing environmental impacts and combining road and rail transport. Another viewpoint is taken from the possible effects of tourism to the passenger transport on rails. Knowledge gained by literature review is deepened by additional internet questionnaire study and expert interview study. In decreasing the environmental impacts of transportation electric trains are definitely the best option providing that the electricity is generated from renewable or carbon dioxide free sources. Decrease of environmental impacts has been reached also with acceptance of larger road transport vehicles. According to interviewed passenger transport experts, the whole route from Tallinn to Berlin may not be convenient to be used in passenger transport, just because the route is too long.. In EU freight is transported mainly with semi-trailer combinations, and that is why it could be logical if huckepack trains would be used on Rail Baltica. Huckepack train allows semi-trailers to be transported on rails with time efficient loading-unloading process. Overall, Rail Baltica project is experienced as a future-oriented one and new railway alignment is seen as great alternative option for transport modes using fossil fuels.

A Steel Company Entering the Market Area of St. Petersburg

Tutkimuksen tavoitteena on selvittää tarkoituksenmukaisin etabloitumismenetelmä teräsyhtiön kansainvälistymisessä Pietarin markkinoille. Vaikka kansainvälistymistä onkin tutkittu paljon, kyseisen kontekstin erityispiirteisiin on aiemmissa tutkimuksissa kiinnitetty vain vähän huomiota. Kansainvälistymisteorioista työhön valittiin John Dunningin eklektinen paradigma sekä Uppsala-malli. Etabloitumismenetelmän valintaa puolestaan tarkastellaan eri vaihtoehtojen kautta, jotka kattavat viennin, suorat ulkomaan investoinnit, sopimusjärjestelyt sekä yhteisyrityksen. Valintaa selitetään taustalla vaikuttavien tekijöiden sekä kansainvälistymisprosessin kautta. Kohteena olevan markkina-alueen potentiaalin, ongelmien sekä yrityksen kilpailuetujen arvioinnin jälkeen ehdotetaan optimaalista ratkaisua. Omat haasteensa operaatiomuodon valintaan luovat potentiaalinen mutta haastava kohdemarkkina-alue sekä yrityksen sisäiset tekijät. Kontekstiin parhaiten sopivaksi etabloitumismenetelmäksi esitetään aloittamista välittömällä viennillä asiakkaiden etsimiseksi ja suhteiden luomiseksi. Kun asiakkuuksia alueella on riittävästi, myyntikonttorin perustaminen Pietarin lähelle nähdään tarkoituksenmukaisena paikallisen läsnäolon lisäämiseksi. Empiirinen data kattaa kahdeksan asiantuntijahaastattelua, jotka yhdessä muun lähdeaineiston kanssa rakentavat perustan empiirisille tuloksille. Tutkimuksen tulokset tarjoavat yritykselle perustellun ratkaisuehdotuksen siitä, kuinka Pietarin markkinoille tulisi etabloitua.

The sources of complementary competitive advantages for systems’ manufacturers in the aircraft modernization market

Being a top of high technology industries, the aerospace represents one of the most complex fields of study. While the competitiveness of aircraft systems’ manufacturers attracts a significant number of researchers, some of the issues remain to be a blank spot. One of those is the after-sale modernization. The master thesis investigates how this concept is related to the theory of competitive advantages. Finding the routes in the framework of complex technological systems’ lifecycle, the key drivers of the aircraft modernization market are revealed. The competitive positioning of players is defined through multiple case studies in a form of several in-depth interviews. The key result of the research is the conclusion that modernization should be considered as an inherent component of strategy of any aircraft systems’ manufacturer, while the master thesis aims to support managerial decision making.

Launching the product innovation to a market: case study from a dairy industry

In the environment of ever-changing needs of customers, technologies and competitors, the survival of the company depends on how well it researches, develops and implements new products to the market. The need for development of new products relates to many factors: globalization, international competition which is now underway on a global scale, scientific advances and development of production, changes in consumer preferences and consumer behavior. In this study the focus is on the company form a dairy products industry. This study is aimed to defining the role of product innovation launch strategy in an overall enterprise strategy, and to select the optimal combination of its marketing tools. The main purpose of this study is to determine place and the role of innovative marketing based in the innovation process, and to determine launch and positioning strategies in the general concept of an innovative product. The object of the study is the Russian enterprise, which is aimed to achieve a competitive advantage through the continuous production of new products, upgrade existing ones and improve innovation management practices. Research showed that the differentiation strategy is suitable for launching the dairy industry product innovation to a market.

Spatial multicriteria decision analysis for the siting of on-shore wind power in Kemiönsaari

Wind power is a low-carbon energy production form that reduces the dependence of society on fossil fuels. Finland has adopted wind energy production into its climate change mitigation policy, and that has lead to changes in legislation, guidelines, regional wind power areas allocation and establishing a feed-in tariff. Wind power production has indeed boosted in Finland after two decades of relatively slow growth, for instance from 2010 to 2011 wind energy production increased with 64 %, but there is still a long way to the national goal of 6 TWh by 2020. This thesis introduces a GIS-based decision-support methodology for the preliminary identification of suitable areas for wind energy production including estimation of their level of risk. The goal of this study was to define the least risky places for wind energy development within Kemiönsaari municipality in Southwest Finland. Spatial multicriteria decision analysis (SMCDA) has been used for searching suitable wind power areas along with many other location-allocation problems. SMCDA scrutinizes complex ill-structured decision problems in GIS environment using constraints and evaluation criteria, which are aggregated using weighted linear combination (WLC). Weights for the evaluation criteria were acquired using analytic hierarchy process (AHP) with nine expert interviews. Subsequently, feasible alternatives were ranked in order to provide a recommendation and finally, a sensitivity analysis was conducted for the determination of recommendation robustness. The first study aim was to scrutinize the suitability and necessity of existing data for this SMCDA study. Most of the available data sets were of sufficient resolution and quality. Input data necessity was evaluated qualitatively for each data set based on e.g. constraint coverage and attribute weights. Attribute quality was estimated mainly qualitatively by attribute comprehensiveness, operationality, measurability, completeness, decomposability, minimality and redundancy. The most significant quality issue was redundancy as interdependencies are not tolerated by WLC and AHP does not include measures to detect them. The third aim was to define the least risky areas for wind power development within the study area. The two highest ranking areas were Nordanå-Lövböle and Påvalsby followed by Helgeboda, Degerdal, Pungböle, Björkboda, and Östanå-Labböle. The fourth aim was to assess the recommendation reliability, and the top-ranking two areas proved robust whereas the other ones were more sensitive.

The Effect of Plant Closures on Market Value: Empirical Evidence from Pulp and Paper Industry 2004-2012

The aim of this study was to research how plant closure announcements affect the market value of the largest pulp and paper industry companies in the world. Also the effect of announcements on competitors was researched and whether the location of plants, timing, reasons for the closures, and characteristics of the closing firms and competitors have an impact on the results. The overall sample included 57 events in the years 2004-2012 and event study was used as a research method. Main theories were signaling theory and spillover effect. According to empirical results, investors consider plant closure announcements as a positive signal for market value. The spillover effect on competitors was, on average, positive and characteristics of the firms and closures had an effect on the results. Furthermore, the market generally predicted the closures and overreacted to them on the announcement day and after it. It is possible for corporate management and investors to learn from the results and use them as support for their decision making.

Susteinable steelmaking by process integration

Environmental issues, including global warming, have been serious challenges realized worldwide, and they have become particularly important for the iron and steel manufacturers during the last decades. Many sites has been shut down in developed countries due to environmental regulation and pollution prevention while a large number of production plants have been established in developing countries which has changed the economy of this business. Sustainable development is a concept, which today affects economic growth, environmental protection, and social progress in setting up the basis for future ecosystem. A sustainable headway may attempt to preserve natural resources, recycle and reuse materials, prevent pollution, enhance yield and increase profitability. To achieve these objectives numerous alternatives should be examined in the sustainable process design. Conventional engineering work cannot address all of these substitutes effectively and efficiently to find an optimal route of processing. A systematic framework is needed as a tool to guide designers to make decisions based on overall concepts of the system, identifying the key bottlenecks and opportunities, which lead to an optimal design and operation of the systems. Since the 1980s, researchers have made big efforts to develop tools for what today is referred to as Process Integration. Advanced mathematics has been used in simulation models to evaluate various available alternatives considering physical, economic and environmental constraints. Improvements on feed material and operation, competitive energy market, environmental restrictions and the role of Nordic steelworks as energy supplier (electricity and district heat) make a great motivation behind integration among industries toward more sustainable operation, which could increase the overall energy efficiency and decrease environmental impacts. In this study, through different steps a model is developed for primary steelmaking, with the Finnish steel sector as a reference, to evaluate future operation concepts of a steelmaking site regarding sustainability. The research started by potential study on increasing energy efficiency and carbon dioxide reduction due to integration of steelworks with chemical plants for possible utilization of available off-gases in the system as chemical products. These off-gases from blast furnace, basic oxygen furnace and coke oven furnace are mainly contained of carbon monoxide, carbon dioxide, hydrogen, nitrogen and partially methane (in coke oven gas) and have proportionally low heating value but are currently used as fuel within these industries. Nonlinear optimization technique is used to assess integration with methanol plant under novel blast furnace technologies and (partially) substitution of coal with other reducing agents and fuels such as heavy oil, natural gas and biomass in the system. Technical aspect of integration and its effect on blast furnace operation regardless of capital expenditure of new operational units are studied to evaluate feasibility of the idea behind the research. Later on the concept of polygeneration system added and a superstructure generated with alternative routes for off-gases pretreatment and further utilization on a polygeneration system producing electricity, district heat and methanol. (Vacuum) pressure swing adsorption, membrane technology and chemical absorption for gas separation; partial oxidation, carbon dioxide and steam methane reforming for methane gasification; gas and liquid phase methanol synthesis are the main alternative process units considered in the superstructure. Due to high degree of integration in process synthesis, and optimization techniques, equation oriented modeling is chosen as an alternative and effective strategy to previous sequential modelling for process analysis to investigate suggested superstructure. A mixed integer nonlinear programming is developed to study behavior of the integrated system under different economic and environmental scenarios. Net present value and specific carbon dioxide emission is taken to compare economic and environmental aspects of integrated system respectively for different fuel systems, alternative blast furnace reductants, implementation of new blast furnace technologies, and carbon dioxide emission penalties. Sensitivity analysis, carbon distribution and the effect of external seasonal energy demand is investigated with different optimization techniques. This tool can provide useful information concerning techno-environmental and economic aspects for decision-making and estimate optimal operational condition of current and future primary steelmaking under alternative scenarios. The results of the work have demonstrated that it is possible in the future to develop steelmaking towards more sustainable operation.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.