Effect of whey protein concentrate on texture of fat-free desserts: sensory and instrumental measurements

It is important to understand how changes in the product formulation can modify its characteristics. Thus, the objective of this study was to investigate the effect of whey protein concentrate (WPC) on the texture of fat-free dairy desserts. The correlation between instrumental and sensory measurements was also investigated. Four formulations were prepared with different WPC concentrations (0, 1.5, 3.0, and 4.5 wt. (%)) and were evaluated using the texture profile analysis (TPA) and rheology. Thickness was evaluated by nine trained panelists. Formulations containing WPC showed higher firmness, elasticity, chewiness, and gumminess and clearly differed from the control as indicated by principal component analysis (PCA). Flow behavior was characterized as time-dependent and pseudoplastic. Formulation with 4.5% WPC at 10 °C showed the highest thixotropic behavior. Experimental data were fitted to Herschel-Bulkley model. The addition of WPC contributed to the texture of the fat-free dairy dessert. The yield stress, apparent viscosity, and perceived thickness in the dairy desserts increased with WPC concentration. The presence of WPC promotes the formation of a stronger gel structure as a result of protein-protein interactions. The correlation between instrumental parameters and thickness provided practical results for food industries.

Thermophysical and rheological properties of dulce de leche with and without coconut flakes as a function of temperature

Dulce de leche (DL), a dairy dessert highly appreciated in Brazil, is a concentrated product containing about 70% m/m of total solids. Thermophysical and rheological properties of two industrial Brazilian Dulce de leche formulations (classic Dulce de leche and Dulce de leche added with coconut flakes 1.5% m/m) were determined at temperatures comprised between 28.4 and 76.4 °C. In general, no significant differences (p < 0.05) were observed in the presence of coconut flakes in the two formulations. Heat capacity varied from 2633.2 to 3101.8 J/kg.°C; thermal conductivity from 0.383 to 0.452 W/m.°C; specific mass from 1350.7 to 1310.7 kg/m³; and, thermal diffusivity from (1.082 × 10-7 to 1.130 × 10-7) m²/s. The Bingham model was used to properly describe the non-Newtonian behavior of both formulations, with yielding stress values varying from 27.3 to 17.6 Pa and plastic viscosity from 19.9 to 5.9 Pa.s.

Monascus pigment production in bioreactor using a co-product of biodiesel as substrate

The study and use of natural pigments in food industries have increased in recent years due to the toxicity presented by artificial pigments. Monascus ruber is a filamentous fungus that produces red, orange, and yellow pigments under different growing conditions. The growth of health food market has increased in parallel with the growth in biofuels production, such as biodiesel, which generates a concomitant increase in the production of glycerin that can be used in bioprocesses. The objective of this study was to use glycerin and glucose as substrates in the production of natural pigments in a bioreactor. The culture of Monascus ruber was carried out in a Bioflo III reactor with 4 L of working volume and pH, temperature, aeration, and agitation control. The highest pigment production was observed after 60 hours of fungal culture with 8.28 UA510 of red pigment. The pH range remained from 5.45 to 6.23 favoring the release of red pigment in the medium. This study shows the feasibility of the production of natural pigments by Monascus ruber in a bioreactor using a co-product of biodiesel without previous treatment as a substrate.

Okara, a soymilk industry by-product, as a non-meat protein source in reduced fat beef burgers

Okara is a by-product generated during the manufacture of soymilk and tofu. Wet okara was added to beef burgers at 0%, 20%, and 25%. The effects of okara on certain physicochemical, textural, and sensory properties of reduced fat beef burgers were investigated. The beef burgers formulated with okara (104.0-106.0 kcal/100 g) had 60% less calories than commercial beef burgers (268.8 kcal/100 g). The texture profile analysis showed that the addition of wet okara led to a significant increase in hardness (p < 0.05) and a concomitant reduction in the values of chewiness, springiness, and cohesiveness. Lower sensory scores (p < 0.05) of flavour were observed in the beef burgers containing 25% wet okara. However, the sensory evaluation results showed that juiciness, appearance, tenderness, and overall acceptability of beef burgers formulated with okara did not differ statistically from that of the control (0% okara). Wet okara (20%) can be used as a non-meat protein source in the production of reduced-fat beef burgers without changing their sensory quality.

Molecular screening of bovine raw milk for the presence of Shiga toxin-producing Escherichia coli (STEC) on dairy farms

Milkborne transmission of Shiga toxin- producing Escherichia coli (STEC) has raised considerable concern due to recent outbreaks worldwide and poses a threat to public health. The aim of this study was to develop a sensitive and specific multiplex PCR assay to detect the presence of STEC in bovine raw milk. To identify E. coli (ATCC 25922) contamination, the gene uspA was used, and PCR sensitivity and specificity were accessed by testing diluted samples ranging from 2 to 2.0 × 10(6) CFU/mL. To detect STEC, the stx1 and stx2 genes were selected as targets. After reaction standardization, the multiplex assay was tested in raw milk collected from 101 cows on dairy farms. PCR assay for E. coli detection had a specificity of 100% and sensitivity of 79% (P<0.0001), with a lower detection limit of 2 CFU/mL. Multiplex PCR assay had 100% sensitivity for E. coli positive raw milk samples, and 31.1% were contaminated with STEC, 28.3% of stx2, and 1.9% of stx1. The multiplex PCR assay described in the present study can be employed to identify and screen E. coli harboring stx1 and stx2 genes in raw milk on dairy farms and in industries.

Effects of orange by-product fiber incorporation on the functional and technological properties of pasta

AbstractThe incorporation of fiber into products consumed every day by the general population is important and viable. The aim of the present work was to evaluate the impact of incorporating orange juice industry dietary fiber byproducts in fettuccini of fresh pasta. Three different fiber concentrations were added to fresh pastas (25 g/kg, 50 g/kg and 75 g/kg). The results showed a significant increase in solid loss content when the incorporation of orange fiber was greater than 50 g/kg. This difference did not occur regarding weight increase values and color parameters. The pasta with 75 g/kg orange fiber can be considered a “high fiber” product, with the total dietary fiber content of the pasta increasing by 99% compared to control pasta. The carotenoid and phenolic contents of pasta increased significantly with the incorporation of fiber at 75 g/kg, but only the pasta formulation with 25 g/kg of orange fiber did not differ from control pasta in relation to all of the sensory attributes and presented an acceptance greater than 75%. The addition of orange fiber byproducts to pastas is an interesting alternative because fiber has a high nutritional value and an abundance of antioxidants.

Modeling and kinetic study of bio-ethanol production from soy protein concentrate by-product

Abstract The aim of this work was to evaluate a non-agitated process of bioethanol production from soybean molasses and the kinetic parameters of fermentation using a strain of Saccharomyces cerevisiae (ATCC® 2345). Kinetic experiment was conducted in medium with 30% (w v-1) of soluble solids without supplementation or pH adjustment. The maximum ethanol concentration was in 44 hours, the ethanol productivity was 0.946 g L-1 h-1, the yield over total initial sugars (Y1) was 47.87%, over consumed sugars (Y2) was 88.08% and specific cells production rate was 0.006 h-1. The mathematical polynomial was adjusted to the experimental data and provided very similar parameters of yield and productivity. Based in this study, for one ton of soybean molasses can be produced 103 kg of anhydrous bioethanol.

Reengineering and modelling of a product certification process

Työn teoriaosuudessa tutkittiin prosessien uudelleen suunnittelua, prosessien mallintamista sekä prosessimittariston rakentamista. Työn tavoitteena oli uudelleen suunnitella organisaation sertifiointiprosessi. Tämän tavoitteen saavuttamiseksi piti mallintaa nykyinen ja uusi prosessi sekä rakentaa mittaristo, joka antaisi organisaatiolle arvokasta tietoa siitä, kuinka tehokkaasti uusi prosessi toimii. Työ suoritettiin osallistuvana toimintatutkimuksena. Diplomityön tekijä oli toiminut kohdeorganisaatiossa työntekijänä jo useita vuosia ja pystyi näinollen hyödyntämään omaa tietämystään sekä nykyisen prosessin mallintamisessa, että uuden prosessin suunnittelussa. Työn tuloksena syntyi uusi sertifiointiprosessi, joka on karsitumpi ja tehokkaampi kuin edeltäjänsä. Uusi mittaristojärjestelmä rakennettiin, jota organisaation johto kykenisi seuraamaan prosessin sidosryhmien tehokkuutta sekä tuotteiden laadun kehitystä. Sivutuotteena organisaatio sai käyttöönsä yksityiskohtaiset prosessikuvaukset, joita voidaan hyödyntää koulutusmateriaalina uutta henkilöstöä rekrytoitaessa sekä informatiivisena työkaluna esiteltäessä prosessia virallisille sertifiointitahoille.

Product Assurance in Agile Space Systems Development

Product assurance is an essential part of product development process if developers want to ensure that final product is safe and reliable. Product assurance can be supported withrisk management and with different failure analysis methods. Product assurance is emphasized in system development process of mission critical systems. The product assurance process in systems of this kind requires extra attention. Inthis thesis, mission critical systems are space systems and the product assurance processof these systems is presented with help of space standards. The product assurance process can be supported with agile development because agile emphasizes transparency of the process and fast response to changes. Even if the development process of space systems is highly standardized and reminds waterfall model, it is still possible to adapt agile development in space systems development. This thesisaims to support the product assurance process of space systems with agile developmentso that the final product would be as safe and reliable as possible. The main purpose of this thesis is to examine how well product assurance is performed in Finnish space organizations and how product assurance tasks and activities can besupported with agile development. The research part of this thesis is performed in survey form.

Product assurance in agile space systems development

Product assurance is an essential part of product development process if developers want to ensure that final product is safe and reliable. Product assurance can be supported with risk management and with different failure analysis methods. Product assurance is emphasized in system development process of mission critical systems. The product assurance process in systems of this kind requires extra attention. In this thesis, mission critical systems are space systems and the product assurance process of these systems is presented with help of space standards. The product assurance process can be supported with agile development because agile emphasizes transparency of the process and fast response to changes. Even if the development process of space systems is highly standardized and reminds waterfall model, it is still possible to adapt agile development in space systems development. This thesis aims to support the product assurance process of space systems with agile development so that the final product would be as safe and reliable as possible. The main purpose of this thesis is to examine how well product assurance is performed in Finnish space organizations and how product assurance tasks and activities can be supported with agile development. The research part of this thesis is performed in survey form.

Lean Product Management – Enhancing Product Managers' Ability to Create Value

The purpose of this master’s thesis was to study the opportunity to apply Lean practices to product management function which happens in an office environment. Since product management plays an important role in the company’s success story, it’s important to have it functioning as effectively as possible. The goal was to find those Lean tools and methods that fit the best to the needs of product management. The research was conducted as a qualitative action research which comprises a comprehensive literature review and a single case study. Theoretical information about Lean Thinking and product management was collected from articles, literature and Internet sources. Moreover, empirical data was collected by conducting interviews in the Case Company’s product management department in order to gain an in-depth understanding of product management’s problematics. The results indicate that most of the product management challenges could be overcome by applying Lean practises. Based on the usability rate, which has been discussed in the empirical part of this study, the most suitable Lean practises for product management function are: value stream mapping, Kanban and KPIs.

The role of product features on buyer-supplier collaboration in packaging industry

The thesis presents the study relative to the collaboration between suppliers and buyers in packaging industry with the impact of product features. The main purpose of this study is to examine the importance of product characteristics on collaboration to develop better packaging and to figure out how buyer-supplier collaboration in the supply chain perspectives is conducted and managed in packaging industry. The theoretical part reviewed some basic frameworks of collaboration including the scopes and levels of collaboration, risks as well as powers of collaboration, relationship and some key factors for successful collaboration. Followed by the overviews of packaging industry with the main issues related to product characteristics in packaging. By using the qualitative method, secondary data consisting of articles, reports, websites and primary data through interviewing some well-known packaging companies and case companies are collected in the thesis. The empirical result emphasized the importance of product features’ analysis in packaging industry since it plays a central role in the materials, design process, production and innovation with the role of collaboration. Collaboration in packaging is vital for packaging companies to survive and grow in the competitive environment. Finally, some key factors for effective collaboration were summarized based on the perspectives of packaging companies. It is highly recommend building a long-run collaboration with their customers due to undeniable benefits With increasingly importance of collaboration in packaging industry, further studies may be conducted.

PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

Characterization of design of a product for additive manufacturing

The purpose of conducting this thesis is to gather around information about additive manufacturing and to design a product to be additively manufactured. The specific manufacturing method dealt with in this thesis, is powder bed fusion of metals. Therefore when mentioning additive manufacturing in this thesis, it is referred to powder bed fusion of metals. The literature review focuses on the principle of powder bed fusion, the general process chain in additive manufacturing, design rules for additive manufacturing. Examples of success stories in additive manufacturing and reasons for selecting parts to be manufactured with additive manufacturing are also explained in literature review. This knowledge is demanded to understand the experimental part of the thesis. The experimental part of the thesis is divided into two parts. Part A concentrates on finding proper geometry for building self-supporting pipes and proper parameters for support structures of them. Part B of the experimental part concentrates on a case study of designing a product for additive manufacturing. As a result of experimental part A, the design process of self-supporting pipes, results of visual analysis and results of 3D scanning are presented. As a result of experimental part B the design process of the product is presented and compared to the original model.

Exploring the impact of celebrity endorsement and product class involvement on advertising effectiveness: an eye tracking approach

Celebrity endorsement has increased in popularity over the past decades and companies are willing to spend increasingly excessive amounts of money into it. Even though multiple studies support celebrity endorsement, further research on its impact on advertising effectiveness is called for. Fur-ther, the role of consumers’ product class involvement in advertising needs to be further studied. The purpose of this study is to explore if consumers’ product class involvement and exposure to celebrity endorsers affect consumers brand recall. Supported by earlier studies, brand recall was used as a measure for advertising effectiveness in this study. In general, a psychological approach was chosen for building the theoretical framework. Concept of classical conditioning was presented in order to understand why people act how they do. Balanced theory and meaning transfer model were presented in order to study how celebrities can be used effectively in advertising context. Further, the importance of product class involvement in advertising effectiveness was evaluated. Hypotheses were formulated based on a literature review of the existing research. Because of the versatility of the research design, a mixed methods approach for this study was adopted. Empirical part of the study was conducted in three stages. First, a pre-test was conducted in order to choose suitable product endorsers for the advertisement stimuli used in the experiment. Second, an eye-tracking experiment with 30 test subjects was conducted in order to study how people view advertisements and whether the familiarity of the product endorser and consumers’ product class involvement affects brand recall. For the experiment, a fictional brand was created in order to avoid bias on brand recall. Third, qualitative interviews for 15 test subjects were conducted in the post-experiment stage in order to gain deeper understating of the phenomenon and to make sense of the findings from the experiment. Findings from this study support celebrity endorsement by suggesting that a famous spokesperson does not steal attention from brand information more than a non-celebrity product endorser. As a result, the use of a celebrity endorser did not decrease brand recall. Results support earlier research as consumer’ higher product class involvement resulted in a better brand recall. Findings from the interviews suggest that consumers have positive perceptions of celebrity endorsement in general. However, the celebrity–brand congruence is a crucial factor when creating attitudes towards the advertisement. Future research ideas were presented based on the limitations and results of this study