Poly(p-phenylen)-Derivate für die Anwendung in Leuchtdioden

Zusammenfassung Das 2,7-Polyfluoren (2,7-PF) wurde in neuer Zeit sowohl wegen seiner einfachen Synthese und hohen Fluoreszenzquantenausbeuten als auch seiner chemischen und thermischen Stabilität intensiv untersucht. Leider liegt das Emissionsmaximum von 2,7-PF in einem Bereich, bei dem das menschliche Auge nicht genügend Sensitivität aufweist. Das Leiter-Poly(p-phenylen) (LPPP) besitzt die optimale Wellenlänge. Jedoch zeigt das LPPP wegen seines steifen Rückgrates große Aggregationstendenz im Film auf, wodurch die Emissionsfarbe bathochrom verschoben und die Photolumineszenzquantenausbeute verringert wird. Es ist deshalb wünschenswert, Polymere zu synthetisieren, die eine längerwellige Emissionsbande als 2,7-PF und eine geringere Aggregationstendenz als LPPP 20 besitzen. Eine Reihe neuer blau emittierender Polymere auf der Basis von Indenofluoren- und Fluoren-Bausteinen mit geringer Aggregationstendenz, hoher thermischer und chemischer Stabilität sowie guter Verarbeitbarkeit wurden dargestellt. Die Polymere weisen eine hohe thermische Stabilität auf (Zersetzung ca.: 310 °C) und sind sehr gut löslich in organischen Lösungsmitteln. Das Absorptionsmaximum des 2,8-Polyindenofluoren (2,8-PIF) in Chloroform liegt bei 416 nm, das Emissionsmaximun bei 432 nm. Die Phasenumwandlungstemperatur beim PIF liegt ca. bei 260 °C. Leider zeigen 2,8-PIF Aggregationstendenzen im Film. Um die Aggregation komplett zu unterbinden, wurden Polyphenylene als Seitenketten an das Dibromfluoren angebracht. Anschließend wurde nach Yamamoto polymerisiert. Das dendritnische PF (DPF) weist die gleiche thermische Stabilität wie die PIFs 28 auf (Zersetzung: 340 °C). Das Polymer 62a ist sehr gut löslich in Toluol, Xylol und chlorierten organischen Lösungsmitteln. Die Absorptions- und Emissionsmaxima des DPFs in Lösung (Chloroform) weisen keine Veränderung gegenüber PF auf. Die Emissionsmaxima des DPFs im Film und nach dem Tempern (100 °C, 24 h) zeigen lediglich eine Verschiebung um 8 nm. Eine Aggregatenbande entsteht jedoch nicht. Dies unterstreicht die abschirmende Eigenschaft der dendritischen Substituenten. Durch Copolymerisation lassen sich die Eigenschaften von Polymeren variieren. Um die Aggregationstendenz der PIF-Derivate zu verringern, wurden die entsprechenden Monomere in verschiedenen Verhältnissen copolymerisiert. Durch die Copolymerisation wurde die PL-Quantenausbeute auf 50 % erhöht. Weiterhin wurden Copolymere von Indenofluoren und 9,10-Dibromanthracen, und erschiedenen Perylenen hergestellt, um zu blau, rot und grün emittierenden Polymeren zu gelangen. Alle blau emittierenden Polymeren wurden in Leuchtdioden untersucht. Das DPF und das Copolymer aus Indenofluoren und Anthracene wiesen die besten Eigenschaften hierfür auf.

DNA block copolymers - synthesis, morphologies and applications

The last decades have witnessed significant and rapid progress in polymer chemistry and molecular biology. The invention of PCR and advances in automated solid phase synthesis of DNA have made this biological entity broadly available to all researchers across biological and chemical sciences. Thanks to the development of a variety of polymerization techniques, macromolecules can be synthesized with predetermined molecular weights and excellent structural control. In recent years these two exciting areas of research converged to generate a new type of nucleic acid hybrid material, consisting of oligodeoxynucleotides and organic polymers. By conjugating these two classes of materials, DNA block copolymers are generated exhibiting engineered material properties that cannot be realized with polymers or nucleic acids alone. Different synthetic strategies based on grafting onto routes in solution or on solid support were developed which afforded DNA block copolymers with hydrophilic, hydrophobic and thermoresponsive organic polymers in good yields. Beside the preparation of DNA block copolymers with a relative short DNA-segment, it was also demonstrated how these bioorganic polymers can be synthesized exhibiting large DNA blocks (>1000 bases) applying the polymerase chain reaction. Amphiphilic DNA block copolymers, which were synthesized fully automated in a DNA synthesizer, self-assemble into well-defined nanoparticles. Hybridization of spherical micelles with long DNA templates that encode several times the sequence of the micelle corona induced a transformation into rod-like micelles. The Watson-Crick motif aligned the hydrophobic polymer segments along the DNA double helix, which resulted in selective dimer formation. Even the length of the resulting nanostructures could be precisely adjusted by the number of nucleotides of the templates. In addition to changing the structural properties of DNA-b-PPO micelles, these materials were applied as 3D nanoscopic scaffolds for organic reactions. The DNA strands of the corona were organized by hydrophobic interactions of the organic polymer segments in such a fashion that several DNA-templated organic reactions proceeded in a sequence specific manner; either at the surface of the micelles or at the interface between the biological and the organic polymer blocks. The yields of reactions employing the micellar template were equivalent or better than existing template architectures. Aside from its physical properties and the morphologies achieved, an important requirement for a new biomaterial is its biocompatibility and interaction with living systems, i.e. human cells. The toxicity of the nanoparticles was analyzed by a cell proliferation assay. Motivated by the non-toxic nature of the amphiphilic DNA block copolymers, these nanoobjects were employed as drug delivery vehicles to target the anticancer drug to a tumor tissue. The micelles obtained from DNA block copolymers were easily functionalized with targeting units by hybridization. This facile route allowed studying the effect of the amount of targeting units on the targeting efficacy. By varying the site of functionalization, i.e. 5’ or 3’, the outcome of having the targeting unit at the periphery of the micelle or in the core of the micelle was studied. Additionally, these micelles were loaded with an anticancer drug, doxorubicin, and then applied to tumor cells. The viability of the cells was calculated in the presence and absence of targeting unit. It was demonstrated that the tumor cells bearing folate receptors showed a high mortality when the targeting unit was attached to the nanocarrier.

Impact of folate absorption and transport for nutrition and drug targeting

In this thesis, interactions of folic acid with tea and tea components at the level of intestinal absorption have been investigated. Firstly, the interaction between folic acid and tea as well as tea catechins was studied in vitro, using Caco-2 cell monolayers and secondly, a clinical trial was designed and carried out. In addition, targeting of folic acid conjugated nanoparticles to FR expressing Caco-2 cells was studied in order to evaluate the principle of nutrient-receptor-coupled transport for drug targeting. In the first part of this work, it was shown that EGCG and ECG (gallated catechins) inhibit folic acid uptake (IC50 of 34.8 and 30.8 µmol/L) comparable to MTX (methotrexate) under these experimental conditions. Moreover, commercial green and black tea extracts inhibited folic acid uptake with IC50 values of approximately 7.5 and 3.6 mg/mL, respectively. These results clearly indicate an interaction between folic acid and green tea catechins at the level of intestinal uptake. The mechanism responsible for the inhibition process might be the inhibition of the influx transport routes for folates such as via RFC and/or PCFT. For understanding the in vivo relevance of this in vitro interaction, a phase one, open-labeled, randomized, cross-over clinical study in seven healthy volunteers was designed. For the 0.4 mg folic acid dose, the mean Cmax decreased by 39.2% and 38.6% and the mean AUC0 decreased by 26.6% and 17.9% by green tea and black tea, respectively. For the 5 mg folic acid dose, the mean Cmax decreased by 27.4% and mean AUC0 decreased by 39.9% when taken with green tea. The results of the clinical study confirm the interaction between tea and folic acid in vivo leading to lower bioavailabilities of folic acid. In the second part of the thesis, targeting studies using folic acid conjugated nanoparticles were conducted. Folic acid conjugated nanoparticles were shown to be internalized by the cell via FR (folate receptor) mediated endocytosis. DNA block copolymer micelles equipped with 2, 11 and 28 folic acid units respectively were applied on FR expressing Caco-2 cells. There was a direct proportion in the amount of internalized nanoparticle and the number of folic acid units on the periphery of the nanoparticle. To sum up, throughout this thesis, the importance of folic acid for nutrition and nutrient and drug related interactions of folic acid at intestinal level was shown. Furthermore, significance of FRs in targeting for cancer chemotherapy was demonstrated in in vitro cell culture experiments. Folic acid conjugated DNA block copolymer micelles were suggested as efficient nanoparticles for targeted drug delivery.

Thin nanostructured crystalline TiO 2 films and their applications in solar cells

Research on thin nanostructured crystalline TiO2 films has attracted considerable interests because of their intriguing physical properties and potential applications in photovoltaics. Nanostructured TiO2 film plays an important role in the TiO2 based dye-sensitized solar cells because they act as a substrate for the adsorption of dye molecules and a matrix for the transportation of electrons as well. Thus they can influence the solar cell performance significantly. Consequently, the control of the morphology including the shape, size and size distribution of the TiO2 nanostructures is critical to tune and optimize the performance of the solar cells. To control the TiO2 morphology, a strategy using amphiphilic block copolymer as templating agent coupled with sol-gel chemistry has been applied. Especially, a good-poor solvent pair induced phase separation process has been developed to guide the microphase separation behavior of the block copolymers. The amphiphilic block copolymers used include polystyrene-block-poly (ethylene oxide) (PS-b-PEO), poly (methyl methacrylate)-block-poly (ethylene oxide) (PMMA-b-PEO), and poly (ethylene oxide)-block-polystyrene-block-poly (ethylene oxide) (PEO-b-PS-b-PEO). The block copolymer undergoes a good-poor-solvent pair induced phase separation in a mixed solution of 1, 4-dioxane or N, N’-dimethyl formamide (DMF), concentrated hydrochloric acid (HCl) and Titanium tetraisopropoxide (TTIP). Specifically, in the system of PS-b-PEO, a morphology phase diagram of the inorganic-copolymer composite films was mapped by adjusting the weight fractions among 1, 4-dioxane, HCl, and TTIP in solution. The amorphous TiO2 within the titania-block copolymer composite films was crystallized by calcination at temperatures above 400C, where the organic block copolymer was simultaneously burned away. This strategy is further extended to other amphiphilic block copolymers of PMMA-b-PEO and PEO-b-PS-b-PEO, where the morphology of TiO2 films can also be controlled. The local and long range structures of the titania films were investigated by the combination of imaging techniques (AFM, SEM) and x-ray scattering techniques (x-ray reflectivity and grazing incidence small-angle x-ray scattering). Based on the knowledge of the morphology control, the crystalline TiO2 nanostructured films with different morphologies were introduced into solid state dye-sensitized solar cells. It has been found that all of the morphologies help to improve the performance of the solar cells. Especially, clustered nanoparticles, worm-like structures, foam-like structures, large collapsed nanovesicles show more pronounced performance improvement than other morphologies such as nanowires, flakes, and nanogranulars.

Struktur-Dynamik-Beziehungen in amorphen festen Lösungen

Feste Lösungen homogen dispergierter Wirkstoffmoleküle in amorphen Polymermatrizen sind wichtige Materialien in vielen pharmazeutischen Anwendungen, bei denen eine kontrollierte Abgabe wasserunlöslicher Wirkstoffe in wässrige Systeme eine Rolle spielt. Die intermolekulare Bindungs-stärke zwischen Polymer- und Wirkstoffmolekülgruppen bestimmt die Stabilität der festen Lösung und steuert somit die biologische Aktivität der Wirkstoffmoleküle. In festen Lösungen, die aus acryl-säurehaltigen Copolymeren (Protonendonoren) und basischen Wirkstoffmolekülen (Protonenakzepto-ren) hergestellt werden, sind intermolekulare Wasserstoffbrücken zwischen den Systemkomponenten Triebkraft für die Bildung einer stabilen homogenen Dispersion und für die Entstehung struktureller Merkmale zwischen den Molekülgruppen der Systemkomponenten. Zudem ist die Bindungsstärke der Wasserstoffbrücken im Hinblick auf die kontrollierte Abgabe der Wirkstoffe von Bedeutung. Da dynamische chemische Gleichgewichte bei der Bildung der Wasserstoffbrücken eine wichtige Rolle spielen müssen neben strukturellen Parametern auch dynamische Faktoren beleuchtet werden. Ziel dieser Arbeit ist neben der Ermittlung von intermolekularen Bindungsstärken vor allem die Identifika-tion struktureller Verhältnisse zwischen den Systemkomponenten auf molekularer Ebene. Die Be-stimmung der Abhängigkeit dieser Parameter von der Struktur der verwendeten Polymere und einer Vielzahl weiterer Einflüsse wie z.B. Feuchtigkeit, Lagerdauer oder Wirkstoffkonzentration soll ein kontrolliertes Design fester Lösungen mit definierten anwendungsspezifischen Eigenschaften ermögli-chen. Temperaturabhängige 1H-Festkörper-MAS-NMR (Magic Angle Spinning Nuclear Magnetic Resonance) Experimente an festen Lösungen mit unterschiedlichen Copolymer-Zusammensetzungen weisen die Existenz dynamischer chemischer Gleichgewichte in den komplexen Wasserstoffbrücken-netzwerken nach. Veränderungen in der chemischen Verschiebung und in der Linienform der Reso-nanzlinien acider Protonen erlauben einen tiefen Einblick in die Architektur dieser Netzwerke und legen die Bindungsverhältnisse unter Berücksichtigung der Polymerchemie und der Mobilität der Systemkomponenten dar, wobei die Befunde mithilfe quantenchemischer Rechnungen untermauert werden können. Die Gegenwart acider Protonen ermöglicht einen einfachen 1H-2H-Austausch, wor-aufhin mithilfe rotorsynchronisierter temperaturabhängiger 2H-MAS-NMR Experimente die Wasser-stoffbrückenbindungsstärke bestimmt werden kann. Mit 1H-1H-Korrelationsexperimenten (Doppelquantenspektroskopie) stehen Methoden für die Bestimmung homonuklearer dipolarer 1H-1H-Kopplungen zur Verfügung, die strukturelle Aussagen aufgrund von bevorzugten räumlichen Kontak-ten bestimmter Molekülgruppen ermöglichen. Weiterhin können diese Experimente verwendet werden, um Wasserstoffbrücken zwischen Polymergruppen von Polymer-Wirkstoff-Wasserstoffbrücken zu unterscheiden, wodurch eine quantitative Beschreibung des Bindungsnetzwerks und der Konkurrenz-prozesse zwischen den einzelnen wasserstoffverbrückten Spezies ermöglicht wird. Eine Kristallisation der Wirkstoffmoleküle ist in vielen Anwendungen unerwünscht, da sie die biologische Verfügbarkeit des Wirkstoffs reduzieren. Mit 1H-Festkörper-MAS-NMR Experimenten können kristalline von amorph dispergierten Wirkstoffmolekülen unterschieden werden, wodurch eine Quantifizierung der Destabilisierungsprozesse ermöglicht wird, die durch Exposition der festen Lösungen mit Wasserdampf ausgelöst werden können. Die Zeit- und Konzentrationsabhängigkeit der Wasseraufnahme kann mit NMR-Experimenten verfolgt werden, wobei unterschiedlich mobile Was-serspezies an unterschiedlichen Bindungsorten identifiziert werden können, was zum molekularen Verständnis der Destabilisierungsprozesse beiträgt. Zusätzlich wird die Mobilität der Wirkstoffmole-küle bestimmt, die sich – wie auch die Wirkstoffkonzentration - als wichtige Größe in der Beschrei-bung der Destabilisierung erweist. Aufbauend auf den Beobachtungen wird ein Zusammenhang zwischen der Copolymerzusammensetzung und einer kritischen Wirkstoffkonzentration hergestellt, der für die Anwendungen amorpher fester Lösungen in biologischen Systemen von großer Bedeutung ist.

Nanoscale effects and applications of self-organized nanostructured thin films

A nanostructured thin film is a thin material layer, usually supported by a (solid) substrate, which possesses subdomains with characteristic nanoscale dimensions (10 ~ 100 nm) that are differentiated by their material properties. Such films have captured vast research interest because the dimensions and the morphology of the nanostructure introduce new possibilities to manipulating chemical and physical properties not found in bulk materials. Block copolymer (BCP) self-assembly, and anodization to form nanoporous anodic aluminium oxide (AAO), are two different methods for generating nanostructures by self-organization. Using poly(styrene-block-methyl methacrylate) (PS-b-PMMA) nanopatterned thin films, it is demonstrated that these polymer nanopatterns can be used to study the influence of nanoscale features on protein-surface interactions. Moreover, a method for the directed assembly of adsorbed protein nanoarrays, based on the nanoscale juxtaposition of the BCP surface domains, is also demonstrated. Studies on protein-nanopattern interactions may inform the design of biomaterials, biosensors, and relevant cell-surface experiments that make use of nanoscale structures. In addition, PS-b-PMMA and AAO thin films are also demonstrated for use as optical waveguides at visible wavelengths. Due to the sub-wavelength nature of the nanostructures, scattering losses are minimized, and the optical response is amenable to analysis with effective medium theory (EMT). Optical waveguide measurements and EMT analysis of the films’ optical anisotropy enabled the in situ characterization of the PS-b-PMMA nanostructure, and a variety of surface processes within the nanoporous AAO involving (bio)macromolecules at high sensitivity.

Structure, organization and dynamics of functional supramolecular materials studied by solid-state NMR

Functional materials have great importance due to their many important applications. The characterization of supramolecular architectures which are held together by non-covalent interactions is of most importance to understand their properties. Solid-state NMR methods have recently been proven to be able to unravel such structure-property relations with the help of fast magic-angle spinning and advanced pulse sequences. The aim of the current work is to understand the structure and dynamics of functional supramolecular materials which are potentially important for fuel-cell (proton conducting membrane materials) and solar-cell or plastic-electronic applications (photo-reactive aromatic materials). In particular, hydrogen-bonding networks, local proton mobility, molecular packing arrangements, and local dynamics will be studied by the use of advanced solid-state NMR methods. The first class of materials studied in this work is proton conducting polymers which also form hydrogen-bonding network. Different materials, which are prepared for high 1H conduction by different approaches are studied: PAA-P4VP, PVPA-ABPBI, Tz5Si, and Triazole-functional systems. The materials are examples of the following major groups; - Homopolymers with specific functional groups (Triazole functional polysiloxanes). - Acid-base polymer blends approach (PAA-P4VP, PVPA-ABPBI). - Acid-base copolymer approach (Triazole-PVPA). - Acid doped polymers (Triazole functional polymer doped with H3PO4). Perylenebisimide (PBI) derivatives, a second type of important functional supramolecular materials with potent applications in plastic electronics, were also investigated by means of solid-state NMR. The preparation of conducting nanoscopic fibers based on the self-assembling functional units is an appealing aim as they may be incorporated in molecular electronic devices. In this category, perylene derivatives have attracted great attention due to their high charge carrier mobility. A detailed knowledge about their supramolecular structure and molecular dynamics is crucial for the understanding of their electronic properties. The aim is to understand the structure, dynamics and packing arrangements which lead to high electron conductivity in PBI derivatives.

DNA block copolymers – from micelles to machines

DNA block copolymer, a new class of hybrid material composed of a synthetic polymer and an oligodeoxynucleotide segment, owns unique properties which can not be achieved by only one of the two polymers. Among amphiphilic DNA block copolymers, DNA-b-polypropylene oxide (PPO) was chosen as a model system, because PPO is biocompatible and has a Tg < 0 °C. Both properties might be essential for future applications in living systems. During my PhD study, I focused on the properties and the structures of DNA-b-PPO molecules. First, DNA-b-PPO micelles were studied by scanning force microscopy (SFM) and fluorescence correlation spectroscopy (FCS). In order to control the size of micelles without re-synthesis, micelles were incubated with template-independent DNA polymerase TdT and deoxynucleotide triphosphates in reaction buffer solution. By carrying out ex-situ experiments, the growth of micelles was visualized by imaging in liquid with AFM. Complementary measurements with FCS and polyacrylamide gel electrophoresis (PAGE) confirmed the increase in size. Furthermore, the growing process was studied with AFM in-situ at 37 °C. Hereby the growth of individual micelles could be observed. In contrast to ex-situ reactions, the growth of micelles adsorbed on mica surface for in-situ experiments terminated about one hour after the reaction was initiated. Two reasons were identified for the termination: (i) block of catalytic sites by interaction with the substrate and (ii) reduced exchange of molecules between micelles and the liquid environment. In addition, a geometrical model for AFM imaging was developed which allowed deriving the average number of mononucleotides added to DNA-b-PPO molecules in dependence on the enzymatic reaction time (chapter 3). Second, a prototype of a macroscopic DNA machine made of DNA-b-PPO was investigated. As DNA-b-PPO molecules were amphiphilic, they could form a monolayer at the air-water interface. Using a Langmuir film balance, the energy released owing to DNA hybridization was converted into macroscopic movements of the barriers in the Langmuir trough. A specially adapted Langmuir trough was build to exchange the subphase without changing the water level significantly. Upon exchanging the subphase with complementary DNA containing buffer solution, an increase of lateral pressure was observed which could be attributed to hybridization of single stranded DNA-b-PPO. The pressure versus area/molecule isotherms were recorded before and after hybridization. I also carried out a series of control experiments, in order to identify the best conditions of realizing a DNA machine with DNA-b-PPO. To relate the lateral pressure with molecular structures, Langmuir Blodgett (LB) films were transferred to highly ordered pyrolytic graphite (HOPG) and mica substrates at different pressures. These films were then investigated with AFM (chapter 4). At last, this thesis includes studies of DNA and DNA block copolymer assemblies with AFM, which were performed in cooperation with different group of the Sonderforschungsbereich 625 “From Single Molecules to Nanoscopically Structured Materials”. AFM was proven to be an important method to confirm the formation of multiblock copolymers and DNA networks (chapter 5).

Complex materials via colloidal crystallization

The work presented in this thesis deals with complex materials, which were obtained by self-assembly of monodisperse colloidal particles, also called colloidal crystallization. Two main fields of interest were investigated, the first dealing with the fabrication of colloidal monolayers and nanostructures, which derive there from. The second turned the focus on the phononic properties of colloidal particles, crystals, and glasses. For the fabrication of colloidal monolayers a method is introduced, which is based on the sparse distribution of dry colloidal particles on a parent substrate. In the ensuing floating step the colloidal monolayer assembles readily at the three-phase-contact line, giving a 2D hexagonally ordered film under the right conditions. The unique feature of this fabrication process is an anisotropic shrinkage, which occurs alongside with the floating step. This phenomenon is exploited for the tailored structuring of colloidal monolayers, leading to designed hetero-monolayers by inkjet printing. Furthermore, the mechanical stability of the floating monolayers allows the deposition on hydrophobic substrates, which enables the fabrication of ultraflat nanostructured surfaces. Densely packed arrays of crescent shaped nanoparticles have also been synthesized. It is possible to stack those arrays in a 3D manner allowing to mutually orientate the individual layers. In a step towards 3D mesoporous materials a methodology to synthesize hierarchically structured inverse opals is introduced. The deposition of colloidal particles in the free voids of a host inverse opal allows for the fabrication of composite inverse opals on two length scales. The phononic properties of colloidal crystals and films are characterized by Brillouin light scattering (BLS). At first the resonant modes of colloidal particles consisting of polystyrene, a copolymer of methylmethacrylate and butylacrylate, or of a silica core-PMMA shell topography are investigated, giving insight into their individual mechanical properties. The infiltration of colloidal films with an index matching liquid allows measuring the phonon dispersion relation. This leads to the assignment of band gaps to the material under investigation. Here, two band gaps could be found, one originating from the fcc order in the colloidal crystal (Bragg gap), the other stemming from the vibrational eigenmodes of the colloidal particles (hybridization gap).

New methods for the functionalization of metathesis polymers

Two general strategies for the functionalization of metathesis polymers are presented in this dissertation. Introducing Sacrificial Synthesis, many of the limitations of ruthenium-catalyzed ROMP have been overcome. Here, the living ROMP polymer to be functionalized was turned into a diblock copolymer by polymerizing dioxepine monomers onto the desired first polymer block. The second block was then later removed to leave “half-a-dioxepin”, i.e. exactly one hydroxyl group, at the chain-end. The efficiency of Sacrificial Synthesis is also studied. Thiol groups were also placed by a sacrificial strategy based on cyclic thioacetals. 2-Phenyl-1,3-dithiepin could be polymerized and subsequently cleaved by hydrogenation with Raney-Nickel. The presence of thiol groups on the chain end has been proven by chemical means (derivatization) and by coating gold-nanoparticles. The second strategy, vinyl lactone quenchingv is a termination reaction based on vinyl esters. After a metathesis step, an inactive Fischer-type carbene is formed. Such acyl carbenes are unstable and self-decompose to set an inactive ruthenium complex and the functional group free without changing the reaction conditions. The two compounds vinylene carbonate and 3H-furanone gave rise to the placement of aldehydes and carboxylic acids at the polymer chain ends without the necessity to perform any deprotection steps after the functionalization. The development of those two functionalization methods led to several applications. By reacting hydroxyl-functionalized ROMP-polymers with norbornene acid, macromonomers were formed which were subsequently polymerized to the respective graft-copolymers. Also, the derivatization of the same functionalized polymers with propargylic acid gave rise to alkyne-functionalized polymers which were conjugated with azides. Furthermore, “ugly stars”, i.e. long-chain branched structures were synthesized by polycondensation of ABn-type macromonomers and telechelic polymers were accessed combining the described functionalization techniques.

Synthese und Untersuchung aromatischer Amide und aramidbasierter Blockcopolymere

Aromatische Amide mit p-Verknüpfung bilden die wohl steifste und härteste Klasse organischer Moleküle. Ihre Oligomere und Polymere sind Materialien mit extremer Stabilität und chemischer Robustheit. Die vorliegende Arbeit beschreibt die Synthese wohldefinierter Oligo-(p-benzamid)e (OPBA) bis zum Hepta-(p-benzamid), deren Kristallstruktur und thermisches Verhalten eingehend untersucht werden. Ihre besondere Steifigkeit wird im Folgenden genutzt, um Stab-Knäuel-Copolymere mit wohldefiniertem OPBA-Stab-Block herzustellen. Das Aggregationsverhalten dieser Copolymere wird näher beschrieben und die Aggregate mittels Rasterkraftmikroskopie (RKM) visualisiert und charakterisiert. Ein Schwerpunkt der durchgeführten Forschung befasst sich mit dem Einflu"s chemischer Variationen von Knäuel- und Stabblock auf die Aggregation. Ausgehend von PEG-OPBA-Copolymeren wird gezeigt, wie sich über kontrolliert radikalische Polymerisation responsive Triblöcke herstellen lassen. Das Verhalten dieser Triblöcke in wässriger Lösung wird eingehender untersucht und anhand von Lichstreu- und RKM-Untersuchungen ein Modell entwickelt, welches dieses Verhalten beschreibt. Neben den OPBA beschäftigt sich die Arbeit mit der Synthese wohldefinierter Oligo-p-phenylen-terephthalamide (OPTA). Der Aufbau PEG-basierter Stab-Knäuel-Copolymere mit monodispersem OPTA-Block wird beschrieben und ihre Aggregate mittels RKM dargestellt. Die Copolymere werden verwendet, um verbesserte Haftungseigenschaften an Twaron-Fasern gegenüber reinem PEG zu demonstrieren.

Single polymers at surfaces: adsorption and detachment

This thesis is concerned with the adsorption and detachment of polymers at planar, rigid surfaces. We have carried out a systematic investigation of adsorption of polymers using analytical techniques as well as Monte Carlo simulations with a coarse grained off-lattice bead spring model. The investigation was carried out in three stages. In the first stage the adsorption of a single multiblock AB copolymer on a solid surface was investigated by means of simulations and scaling analysis. It was shown that the problem could be mapped onto an effective homopolymer problem. Our main result was the phase diagram of regular multiblock copolymers which shows an increase in the critical adsorption potential of the substrate with decreasing size of blocks. We also considered the adsorption of random copolymers which was found to be well described within the annealed disorder approximation. In the next phase, we studied the adsorption kinetics of a single polymer on a flat, structureless surface in the regime of strong physisorption. The idea of a ’stem-flower’ polymer conformation and the mechanism of ’zipping’ during the adsorption process were used to derive a Fokker-Planck equation with reflecting boundary conditions for the time dependent probability distribution function (PDF) of the number of adsorbed monomers. The numerical solution of the time-dependent PDF obtained from a discrete set of coupled differential equations were shown to be in perfect agreement with Monte Carlo simulation results. Finally we studied force induced desorption of a polymer chain adsorbed on an attractive surface. We approached the problem within the framework of two different statistical ensembles; (i) by keeping the pulling force fixed while measuring the position of the polymer chain end, and (ii) by measuring the force necessary to keep the chain end at fixed distance above the adsorbing plane. In the first case we treated the problem within the framework of the Grand Canonical Ensemble approach and derived analytic expressions for the various conformational building blocks, characterizing the structure of an adsorbed linear polymer chain, subject to pulling force of fixed strength. The main result was the phase diagram of a polymer chain under pulling. We demonstrated a novel first order phase transformation which is dichotomic i.e. phase coexistence is not possible. In the second case, we carried out our study in the “fixed height” statistical ensemble where one measures the fluctuating force, exerted by the chain on the last monomer when a chain end is kept fixed at height h over the solid plane at different adsorption strength ε. The phase diagram in the h − ε plane was calculated both analytically and by Monte Carlo simulations. We demonstrated that in the vicinity of the polymer desorption transition a number of properties like fluctuations and probability distribution of various quantities behave differently, if h rather than the force, f, is used as an independent control parameter.

Solid-state NMR investigation of phosphonic acid based proton conducting materials

In this work, new promising proton conducting fuel cell membrane materials were characterized in terms of their structure and dynamic properties using solid-state nuclear magnetic resonance (NMR) spectroscopy and X-ray diffraction. Structurally different, phosphonic acid (PA) containing materials were systematically evaluated for possible high-temperature operation (e.g. at T>100°C). Notably, 1H, 2H and 31P magic angle spinning (MAS) NMR provided insight into local connectivities and dynamics of the hydrogen bonded network, while packing arrangements were identified by means of heteronuclear dipolar recoupling techniques.rnThe first part of this work introduced rather crystalline, low molecular weight ionomers for proton conducting membranes, where six different geometries such as line, triangle, screw, tetrahedron, square and hexagon, were investigated. The hexagon was identified as the most promising geometry with high-temperature bulk proton conductivities in the range of 10-3 Scm-1 at a relative humidity of 50%. However, 2H NMR and TGA-MS data suggest that the bulk proton transport is mainly due to the presence of crystal water. Single crystal X-ray data revealed that in the tetrahedron phosphonic acids form tetrameric clusters isolating the mobile protons while the phosphonic acids in the hexagon form zigzag-type pathways through the sample.rnThe second part of this work demonstrates how acid-base pairing and the choice of appropriate spacers may influence proton conduction. Different ratios of statistical copolymers of poly (vinylphosphonic acid) and poly (4-vinylpyridine) were measured to derive information about the local structure and chemical changes. Though anhydrous proton conductivities of all statistical copolymers are rather poor, the conductivity increases to 10-2 S cm-1 when exposing the sample to relative humidity of 80%. In contrast to PVPA, anhydride formation of phosphonic acids in the copolymer is not reversible even when exposing the sample to a relative humidity of 100%.rnIn addition, the influence of both spacers and degree of backbone crystallinity on bulk proton conductivity was investigated. Unlike in systems such as poly benzimidazole (PBI), spacers were inserted between the protogenic groups along the backbone. It was found that dilution of the protogenic groups decreases the conductivity, but compared to PVPA, similar apparent activation energies for local motions were obtained from both variable temperature 1H NMR and impedance spectroscopy data. These observations suggest the formation of phosphonic acid clusters with high degrees of local proton motion, where only a fraction of motions contribute to the observable bulk proton conductivity. Additionally, it was shown that gradual changes of the spacer length lead to different morphologies.rnIn summary, applying advanced solid-state NMR and X-ray analysis, structural and dynamic phenomena in proton conducting materials were identified on a molecular level. The results were discussed with respect to different proton conduction mechanisms and may contribute to a more rational design or improvement of proton conducting membranes.rn

Self assembled materials for solar cell application

In der vorliegenden Arbeit wurden Materialien und Aufbauten für Hybrid Solarzellen entwickelt und erforscht. rnDer Vergleich zweier bekannter Lochleitermaterialien für Solarzellen in einfachen Blend-Systemen brachte sowohl Einsicht zur unterschiedlichen Eignung der Materialien für optoelektronische Bauelemente als auch neue Erkenntnisse in Bereichen der Langzeitstabilität und Luftempfindlichkeit beider Materialien.rnWeiterhin wurde eine Methode entwickelt, um Hybrid Solarzelle auf möglichst unkomplizierte Weise aus kostengünstigen Materialien darzustellen. Die „Eintopf“-Synthese ermöglicht die unkomplizierte Darstellung eines funktionalen Hybridmaterials für die optoelektronische Anwendung. Mithilfe eines neu entwickelten amphiphilen Blockcopolymers, das als funktionelles Templat eingesetzt wurde, konnten mit einem TiO2-Precursor in einem Sol-Gel Ansatz verschiedene selbstorganisierte Morphologien des Hybridmaterials erhalten werden. Verschiedene Morphologien wurden auf ihre Eignung in Hybrid Solarzellen untersucht. Ob und warum die Morphologie des Hybridsystems die Effizienz der Solarzelle beeinflusst, konnte verdeutlicht werden. Mit der Weiterentwicklung der „Eintopf“-Synthese, durch den Austausch des TiO2-Precursors, konnte die Solarzelleneffizienz von 0.15 auf 0.4 % gesteigert werden. Weiterhin konnte die Übertragbarkeit des Systems durch den erfolgreichen Austausch des Halbleiters TiO¬2 mit ZnO bewiesen werden.rn

Synthese von komplexen Polymerarchitekturen durch die kontrollierte Polymerisation von Reaktivester-Monomeren

Im Rahmen dieser Arbeit wurden zunächst die Grundlagen der Reaktivester-Chemiernuntersucht. Hierfür wurden verschiedenste Reaktivester-Monomere synthetisiert undrnmittels kontrolliert radikalischer Polymerisation polymerisiert. Diese Polymerernkonnten mit engen Molekulargewichtsverteilungen und vorherbestimmbarenrnMolekulargewichten dargestellt werden. Die daraus erhaltenen Kenntnisse wurdenrnauf verschiedene Bereiche angewendet.rnZum einen wurden auflösbare Netzwerke dargestellt. Dazu wurde 2,3,5,6-Tetrafluor-rn1,4-phenyldiacrylat synthetisiert. Durch die Verwendung eines reaktiven Vernetzersrnwurden Gele hergestellt, die durch den Einfluss von Nukleophilen gezielt auflösbarrnsind.rnAußerdem wurden erstmalig Blockcopolymer-Strukturen aus Poly(ethylenglycol),rnOligo(p-benzamid)en (OPBA) und Reaktivester-Polymeren synthetisiert. Diernpolymeranaloge Umsetzung des Reaktivesterblocks sollte zu stimuli responsivenrnSystemen führen, die durch thermischen Einfluss den Volumenanspruch verändernrnund somit das Aggregationsverhalten der OPBA bestimmen sollten.rnEin weiterer Aspekt war die Synthese von orthogonal funktionalisierbarenrnBlockcopolymeren, die durch Kombination von ringöffnender Polymerisation vonrnLactonen und RAFT Polymerisation von Reaktivester-Monomeren dargestellt werdenrnsollten. So war es erstmals möglich Blockcopolymere zu synthetisieren, die diernEigenschaften aliphatischer Polyester besitzen und durch Reaktivester-Chemiernfunktionalisiert werden konnten. Desweiteren wurden auf dieser Basis orthogonalrnfunktionalisierbare Blockcopolymere dargestellt, an die polymeranalog Nukleophilernangebunden und per Click-Chemie Poly(ethylenglycol)-Seitenketten eingefügtrnwerden konnten. Durch die Möglichkeit, die reaktiven Gruppen unterschiedlichrnansprechen zu können, eröffnet sich ein weites Feld der Funktionalisierung, ohne diernBioabbaubarkeit der aliphatischen Polyester zu beeinflussen.