Novel window functions for digital filters

Window technique is one of the simplest methods to design Finite Impulse Response (FIR) filters. It uses special functions to truncate an infinite sequence to a finite one. In this paper, we propose window techniques based on integer sequences. The striking feature of the proposed work is that it overcomes all the problems posed by floating point numbers and inaccuracy, as the sequences are made of only integers. Some of these integer window sequences, yield sharp transition, while some of them result in zero ripple in passband and stopband.

Instagrammatics and digital methods: Studying visual social media, from selfies and GIFs to memes and emoji

Visual content is a critical component of everyday social media, on platforms explicitly framed around the visual (Instagram and Vine), on those offering a mix of text and images in myriad forms (Facebook, Twitter, and Tumblr), and in apps and profiles where visual presentation and provision of information are important considerations. However, despite being so prominent in forms such as selfies, looping media, infographics, memes, online videos, and more, sociocultural research into the visual as a central component of online communication has lagged behind the analysis of popular, predominantly text-driven social media. This paper underlines the increasing importance of visual elements to digital, social, and mobile media within everyday life, addressing the significant research gap in methods for tracking, analysing, and understanding visual social media as both image-based and intertextual content. In this paper, we build on our previous methodological considerations of Instagram in isolation to examine further questions, challenges, and benefits of studying visual social media more broadly, including methodological and ethical considerations. Our discussion is intended as a rallying cry and provocation for further research into visual (and textual and mixed) social media content, practices, and cultures, mindful of both the specificities of each form, but also, and importantly, the ongoing dialogues and interrelations between them as communication forms.

Vendors' perspectives of coordination in the information technology offshore outsourcing industry : An exploratory study from the Philippines

This study investigates how offshore information technology (IT) service providers (vendors) coordinate work with their clients (employers) in order to succeed in the global IT offshore outsourcing industry. We reviewed literature on coordination studies, interviewed offshore service providers in the Philippines, and used thematic analysis to analyse coordination practices from the point of view of these individual vendors in a newly industrialized country. We used Olson and Olson's framework on 'collaboration at a distance' as a lens to structure the results. The study provides an understanding of vendors' individual attitudes towards the coordination of distributed work and draws attention to how differences in power affect the work situation of vendors, and by implication all stakeholders. We offer this insight as a way to enhance existing CSCW frameworks, by imbuing them with the perspective of non-equal relationships. The study found that vendors were generally able to produce outputs that satisfy their clients, however these results were only achieved because individuals were willing to take risks and make sacrifices in their personal lives. The relationship was further characterised by a complex interplay between the client's control of the overall work arrangements and the vendors' ability to establish a level of autonomy in their work practices and their flexible use of coordination tools.

Mapping sociocultural controversies across digital media platforms: One week of #gamergate on Twitter, YouTube, and Tumblr

Social media play a prominent role in mediating issues of public concern, not only providing the stage on which public debates play out but also shaping their topics and dynamics. Building on and extending existing approaches to both issue mapping and social media analysis, this article explores ways of accounting for popular media practices and the special case of ‘born digital’ sociocultural controversies. We present a case study of the GamerGate controversy with a particular focus on a spike in activity associated with a 2015 Law and Order: SVU episode about gender-based violence and harassment in games culture that was widely interpreted as being based on events associated with GamerGate. The case highlights the importance and challenges of accounting for the cultural dynamics of digital media within and across platforms.

Governance of enterprise Information and Technology: A new core competency for boards of directors

With the level of digital disruption that is affecting businesses around the globe, you might expect high levels of Governance of Enterprise Information and Technology (GEIT) capability within boards. Boards and their senior executives know technology is important. More than 90% of boards and senior executives currently identify technology as essential to their current businesses, and to their organization’s future. But as few as 16% have sufficient GEIT capability. Global Centre for Digital Business Transformation’s recent research contains strong indicators of the need for change. Despite board awareness of both the likelihood and impact of digital disruption, things digital are still not viewed as a board-level matter in 45% of companies. And, it’s not just the board. The lack of board attention to technology can be mirrored at senior executive level as well. When asked about their organization’s attitude towards digital disruption, 43% of executives said their business either did not recognise it as a priority or was not responding appropriately. A further 32% were taking a “follower” approach, a potentially risky move as we will explain. Given all the evidence that boards know information and technology (I&T***) is vital, that they understand the inevitably, impact and speed of digital change and disruption, why are so many boards dragging their heels? Ignoring I&T disruption and refusing to build capability at board level is nothing short of negligence. Too many boards risk flying blind without GEIT capability [2]. To help build decision quality and I&T governance capability, this research: • Confirms a pressing need to build individual competency and cumulative, across-board capability in governing I&T • Identifies six factors that have rapidly increased the need, risk and urgency • Finds that boards may risk not meeting their duty of care responsibilities when it comes to I&T oversight • Highlights barriers to building capability details three GEIT competencies that boards and executives can use for evaluation, selection, recruitment and professional development.

Book Review: "Engin Isin and Evelyn Ruppert, Being Digital Citizens. London: Rowman & Littlefield, 2015"

The concept of digital citizenship has become increasingly important to our understanding of the relationship between media and political action, and the possibilities for democratization, decentralization, and diversification of power offered by the Internet. In the era of the digitalization of just about everything, citizenship and its related concepts are in processes of technology-driven transformation, with important implications for the global future of democratic culture. Isin and Ruppert’s book is a timely engagement with these questions, and with the emerging notion of the “digital subject.”

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Design and realization of high-performance wave-pipelined 8×8 b multiplier in CMOS technology

Wave pipelining is a design technique for increasing the throughput of a digital circuit or system without introducing pipelining registers between adjacent combinational logic blocks in the circuit/system. However, this requires balancing of the delays along all the paths from the input to the output which comes the way of its implementation. Static CMOS is inherently susceptible to delay variation with input data, and hence, receives a low priority for wave pipelined digital design. On the other hand, ECL and CML, which are amenable to wave pipelining, lack the compactness and low power attributes of CMOS. In this paper we attempt to exploit wave pipelining in CMOS technology. We use a single generic building block in Normal Process Complementary Pass Transistor Logic (NPCPL), modeled after CPL, to achieve equal delay along all the propagation paths in the logic structure. An 8×8 b multiplier is designed using this logic in a 0.8 ?m technology. The carry-save multiplier architecture is modified suitably to support wave pipelining, viz., the logic depth of all the paths are made identical. The 1 mm×0.6 mm multiplier core supports a throughput of 400 MHz and dissipates a total power of 0.6 W. We develop simple enhancements to the NPCPL building blocks that allow the multiplier to sustain throughputs in excess of 600 MHz. The methodology can be extended to introduce wave pipelining in other circuits as well

Optimal Power and Noise for Analog and Digital Sections of a Low Power Radio Receiver

We determine the optimal allocation of power between the analog and digital sections of an RF receiver while meeting the BER constraint. Unlike conventional RF receiver designs, we treat the SNR at the output of the analog front end (SNRAD) as a design parameter rather than a specification to arrive at this optimal allocation. We first determine the relationship of the SNRAD to the resolution and operating frequency of the digital section. We then use power models for the analog and digital sections to solve the power minimization problem. As an example, we consider a 802.15.4 compliant low-IF receiver operating at 2.4 GHz in 0.13 μm technology with 1.2 V power supply. We find that the overall receiver power is minimized by having the analog front end provide an SNR of 1.3dB and the ADC and the digital section operate at 1-bit resolution with 18MHz sampling frequency while achieving a power dissipation of 7mW.

Strain field measurement using digital image correlation

Digital Image Correlation and Tracking (DIC/DDIT) is an optical method that employs tracking & image registration techniques for accurate 2D and 3D measurements of changes in images. This is often used to measure deformation (engineering), displacement, and strain, but it is widely applied in many areas of science and engineering. One very common application is for measuring the motion of an optical mouse.

Surface electrode switching of a 16-electrode wireless EIT system using RF-based digital data transmission scheme with 8 channel encoder/decoder ICs

A Radio Frequency (RF) based digital data transmission scheme with 8 channel encoder/decoder ICs is proposed for surface electrode switching of a 16-electrode wireless Electrical Impedance Tomography (EIT) system. A RF based wireless digital data transmission module (WDDTM) is developed and the electrode switching of a EIT system is studied by analyzing the boundary data collected and the resistivity images of practical phantoms. An analog multiplexers based electrode switching module (ESM) is developed with analog multiplexers and switched with parallel digital data transmitted by a wireless transmitter/receiver (T-x/R-x) module working with radio frequency technology. Parallel digital bits are generated using NI USB 6251 card working in LabVIEW platform and sent to transmission module to transmit the digital data to the receiver end. The transmitter/receiver module developed is properly interfaced with the personal computer (PC) and practical phantoms through the ESM and USB based DAQ system respectively. It is observed that the digital bits required for multiplexer operation are sequentially generated by the digital output (D/O) ports of the DAQ card. Parallel to serial and serial to parallel conversion of digital data are suitably done by encoder and decoder ICs. Wireless digital data transmission module successfully transmitted and received the parallel data required for switching the current and voltage electrodes wirelessly. 1 mA, 50 kHz sinusoidal constant current is injected at the phantom boundary using common ground current injection protocol and the boundary potentials developed at the voltage electrodes are measured. Resistivity images of the practical phantoms are reconstructed from boundary data using EIDORS. Boundary data and the resistivity images reconstructed from the surface potentials are studied to assess the wireless digital data transmission system. Boundary data profiles of the practical phantom with different configurations show that the multiplexers are operating in the required sequence for common ground current injection protocol. The voltage peaks obtained at the proper positions in the boundary data profiles proved the sequential operation of multiplexers and successful wireless transmission of digital bits. Reconstructed images and their image parameters proved that the boundary data are successfully acquired by the DAQ system which in turn again indicates a sequential and proper operation of multiplexers as well as the successful wireless transmission of digital bits. Hence the developed RF based wireless digital data transmission module (WDDTM) is found suitable for transmitting digital bits required for electrode switching in wireless EIT data acquisition system. (C) 2011 Elsevier Ltd. All rights reserved.

Switching of a Sixteen Electrode Array for Wireless EIT System Using a RF-Based 8-Bit Digital Data Transmission Technique

Surface electrode switching of 16-electrode wireless EIT is studied using a Radio Frequency (RF) based digital data transmission technique operating with 8 channel encoder/decoder ICs. An electrode switching module is developed the analog multiplexers and switched with 8-bit parallel digital data transferred by transmitter/receiver module developed with radio frequency technology. 8-bit parallel digital data collected from the receiver module are converted to 16-bit digital data by using binary adder circuits and then used for switching the electrodes in opposite current injection protocol. 8-bit parallel digital data are generated using NI USB 6251 DAQ card in LabVIEW software and sent to the transmission module which transmits the digital data bits to the receiver end. Receiver module supplies the parallel digital bits to the binary adder circuits and adder circuit outputs are fed to the multiplexers of the electrode switching module for surface electrode switching. 1 mA, 50 kHz sinusoidal constant current is injected at the phantom boundary using opposite current injection protocol. The boundary potentials developed at the voltage electrodes are measured and studied to assess the wireless data transmission.

Power scalable digital baseband architecture for IEEE 802.15.4

We propose a power scalable digital base band for a low-IF receiver for IEEE 802.15.4-2006. The digital section's sampling frequency and bit width are used as knobs to reduce the power under favorable signal and interference scenarios, thus recovering the design margins introduced to handle worst case conditions. We propose tuning of these knobs based on measurements of Signal and the interference levels. We show that in a 0.13u CMOS technology, for an adaptive digital base band section of the receiver designed to meet the 802.15.4 standard specification, power saving can be up to nearly 85% (0.49mW against 3.3mW) in favorable interference and signal conditions.