The Impact of a Classroom Performance System on Learning Gains in a Biology Course for Science Majors

This study was conducted to determine if the use of the technology known as Classroom Performance System (CPS), specifically referred to as “Clickers”, improves the learning gains of students enrolled in a biology course for science majors. CPS is one of a group of developing technologies adapted for providing feedback in the classroom using a learner-centered approach. It supports and facilitates discussion among students and between them and teachers, and provides for participation by passive students. Advocates, influenced by constructivist theories, claim increased academic achievement. In science teaching, the results have been mixed, but there is some evidence of improvements in conceptual understanding. The study employed a pretest-posttest, non-equivalent groups experimental design. The sample consisted of 226 participants in six sections of a college biology course at a large community college in South Florida with two instructors trained in the use of clickers. Each instructor randomly selected their sections into CPS (treatment) and non-CPS (control) groups. All participants filled out a survey that included demographic data at the beginning of the semester. The treatment group used clicker questions throughout, with discussions as necessary, whereas the control groups answered the same questions as quizzes, similarly engaging in discussion where necessary. The learning gains were assessed on a pre/post-test basis. The average learning gains, defined as the actual gain divided by the possible gain, were slightly better in the treatment group than in the control group, but the difference was statistically non-significant. An Analysis of Covariance (ANCOVA) statistic with pretest scores as the covariate was conducted to test for significant differences between the treatment and control groups on the posttest. A second ANCOVA was used to determine the significance of differences between the treatment and control groups on the posttest scores, after controlling for sex, GPA, academic status, experience with clickers, and instructional style. The results indicated a small increase in learning gains but these were not statistically significant. The data did not support an increase in learning based on the use of the CPS technology. This study adds to the body of research that questions whether CPS technology merits classroom adaptation.

The effect of mobile technology as an active student response system on the acquisition of U.S. history content of secondary students with specific learning disabilities

Students with specific learning disabilities (SLD) typically learn less history content than their peers without disabilities and show fewer learning gains. Even when they are provided with the same instructional strategies, many students with SLD struggle to grasp complex historical concepts and content area vocabulary. Many strategies involving technology have been used in the past to enhance learning for students with SLD in history classrooms. However, very few studies have explored the effectiveness of emerging mobile technology in K-12 history classrooms. ^ This study investigated the effects of mobile devices (iPads) as an active student response (ASR) system on the acquisition of U.S. history content of middle school students with SLD. An alternating treatments single subject design was used to compare the effects of two interventions. There were two conditions and a series of pretest probesin this study. The conditions were: (a) direct instruction and studying from handwritten notes using the interactive notebook strategy and (b) direct instruction and studying using the Quizlet App on the iPad. There were three dependent variables in this study: (a) percent correct on tests, (b) rate of correct responses per minute, and (c) rate of errors per minute. ^ A comparative analysis suggested that both interventions (studying from interactive notes and studying using Quizlet on the iPad) had varying degrees of effectiveness in increasing the learning gains of students with SLD. In most cases, both interventions were equally effective. During both interventions, all of the participants increased their percentage correct and increased their rate of correct responses. Most of the participants decreased their rate of errors. ^ The results of this study suggest that teachers of students with SLD should consider a post lesson review in the form of mobile devices as an ASR system or studying from handwritten notes paired with existing evidence-based practices to facilitate students’ knowledge in U.S. history. Future research should focus on the use of other interactive applications on various mobile operating platforms, on other social studies subjects, and should explore various testing formats such as oral question-answer and multiple choice. ^

The Experience of Adult Literacy as a Learning Process in the Formation of Future Educators

Learning is constructed when it is significant, therefore, promoting experiences that can make sense and joy, which constitutes a challenge in the formation of future educators. In this article, we share the considerations emanated from an investigation that gathers the experience of alphabetizing adults, carried out by college students as part of their formation. As a result, this creates a learning process that favors the respect to diversity and the value of reading and writing as the liberation of mankind. The work displays the learnings constructed, the ways of respecting diversity that emerge from the alphabetizing experience, and the value that the students give to reading and writing as a liberating way of expression.

BELIEFS ABOUT ENGLISH LEARNING AND TEACHING IN A TECHNICAL SCHOOL IN THE CITY OF PONTA PORÃ/MS

Abstract: This study is part of my master research, which aimed to investigate the beliefs about  English learning and teaching of students entering to a High School Course integrated to Computer Technician at a Federal High School in the city Ponta Pora / MS , located at the  border  with Paraguay . In the context , great part of the students coming from public schools in the region  had not studied English as a foreign language in elementary school , once it is located  in a region of the border with Paraguay , it offers only Spanish as a foreign language. The interest for this research came up as of conflicting situations between the teacher way of teaching and students ways of learning, especially of those who had not studied English in elementary school. Thus we tried to study the beliefs of these students, analyzing how they process in that context in order to promote reflection of the teacher  to perform actions of intervention in order to reduce the mismatches between the ways of teaching and the ways that the students believe to be the right to learn. Keywords: Beliefs; English Teaching and Learning; Context

BELIEFS ABOUT LEARNING ASSESSMENT: SAYING OF A SPANISH TEACHER OF A PUBLIC SCHOOL

The teachers' beliefs study has been a good resource for further reflection on the teaching practice. Beliefs, defined as constructions of reality, arise from the livings and experiences of teacher and encompass professional, personal, emotional and ideological aspects and influence on the practices in the classroom. Elucidating the teacher beliefs is a way of revealing what they think, how they feel and what are the limitations of these professionals. For this reason, considering the amount of value on the belief on the teacher's action and the importance (not always considered) of the evaluation of learning in the process of teaching, learning and evaluating, this work aims to present the beliefs about learning assessment of a Spanish teacher as a foreign language in a public school of Rio Grande do Sul. The results indicate that the beliefs of the teacher correspond to the contemporary theories of learning assessment and the guideline of the official documents for teaching languages.

Tensions, transisitions and triumphs : examining the transitional experience of fashion students between school and university

Joining any new community involves transition and adaptation. Just as we learn to adapt to different cultures when we choose to live abroad, so students learn the language and culture of an academic community in order to succeed within that environment. At the same time however, students bring with them individual learning styles and expectations, influenced by their prior experiences of learning and of life more generally. Some have excelled at school; others have come to fashion seeking something in which to excel for the first time. Commencing a degree in fashion design brings students into contact with peers and lecturers who share their passion, providing them with a community of practice which can be both supportive and at the same time intimidating.----- In Queensland where university level study in fashion is such a new phenomenon, few applicants have any depth of training in design when they apply to study fashion. Unlike disciplines such as Dance or Visual Art, where lecturers can expect a good level of skill upon entry to a degree program, we have to look for the potential evidenced in an applicant’s portfolio, much of which is untutored work that they have generated themselves in preparation for application. This means that many first year fashion students at QUT whilst very passionate about the idea of fashion design are often very naïve about the practice of fashion design, with limited knowledge of the history or cultural context of fashion and few of the technical skills needed to translate their ideas into three dimensional products.----- For teachers engaging with first year students in the design studios, it is critical to be cognizant of this mix of different experiences, expectations and emotions in order to design curricula and assessment that stretch and engage students without unduly increasing their sense of frustration and anxiety. This paper examines a first year project designed to provide an introduction to design process and to learning within a creative discipline. The lessons learnt provide a valuable and transferable resource for lecturers in a variety of art and design disciplines.

The development of a new four-year Construction Technology and Management Stream at QUT

This paper focuses on the development and delivery of a core construction management (CM) unit, which forms the capstone of a four-unit CM stream in an undergraduate programme in the Faculty of Built Environment and Engineering at the Queensland University of Technology. UDB410 (Construction Management) is a final year unit that consolidates skills students have learned throughout their degree, hopefully graduating them as work-ready construction managers. It was developed in consultation with the Queensland Chapter of the Australian Institute of Building (AIB) and is a final year unit in the undergraduate Bachelor of Urban Development (CM) course. The unit uses various tools such as the OSIRIS business database (Bureau van Dijk Electronic Publishing, 2009), the AROUSAL (UK Version) construction business simulation (Lansley, 2009) and the Denison Organisational Culture Survey (Denison, 2000) to facilitate the development of skills in managing a construction company. The objectives of the paper are: • To track the rationale and development of the UDB410 unit sand describe the way in which this final year unit integrates learning from other parts of the course within which it is located as well as capping-off the CM stream of core units; • To highlight the difficulties of blending a balance of technology and management in a single unit; and • To explain how partnering with the construction industry benefited the learning quality of the unit.

Technology strategy : findings from adoption and adaptation of Japanese manufacturing management (JMM) to ASEAN and Australasian automotive manufacturers

The purpose of this study is to demonstrate the appropriateness of “Japanese Manufacturing Management” (JMM) strategies in the Asian, ASEAN and Australasian automotive sectors. Secondly, the study assessed JMM as a prompt, effective and efficient global manufacturing management practice for automotive manufacturing companies to learn; benchmark for best practice; acquire product and process innovation, and enhance their capabilities and capacities. In this study, the philosophies, systems and tools that have been adopted in various automotive manufacturing assembly plants and their tier 1 suppliers in the three Regions were examined. A number of top to middle managers in these companies were located in Thailand, Indonesia, Malaysia, Singapore, Philippines, Viet Nam, and Australia and were interviewed by using a qualitative methodology. The results confirmed that the six pillars of JMM (culture change, quality at shop floor, consensus, incremental continual improvement, benchmarking, and backward-forward integration) are key enablers to success in adopting JMM in both automotive and other manufacturing sectors in the three Regions. The analysis and on-site interviews identified a number of recommendations that were validated by the automotive manufacturing company’s managers as the most functional JMM strategies.

Respecting local, cultural contexts for assessment practice in an era of globalization

Dissatisfaction, internationally, with existing educational practices and outcomes since the early 1990s has led to increased educational reform. At the same time, there has also been a worldwide shift in control of education away from teachers toward the state for the purposes of restructuring economies. More bureaucratic forms of curriculum and assessment have resulted, with a return to the use of more techno-rational discourse in assessment and evaluation for purposes of efficiency, accountability, impact, and performance management. There has also been an increase in the use of economic and productivity models to study educational outcomes. These models fail to account for the range of outcomes achieved and fail to identify the factors responsible for such diversity in performance.

Maintaining your career “edge” in a global world of work

The world of work in the 21st century has been described by many as globalised (Peiperl & Jonsen, 2007; Levy, 2007; Bhagat, 2006; Czinkota & Ronkainen, 2005). Globalisation is generally understood as a greater awareness of the world as a whole; an integrated stage where the countries of the world are seen to be players on the one playing field. This notion is driven by a perception of the world as being occupied by global citizens who are affiliated not with the country in which they are born but whose loyalties lie with planet Earth. They strive to live and work with this focus foremost in their consciousness. Indeed, many of these global citizens will enjoy global careers during their lifetime whereby they work in more than one region of the world during the course of their employment. The present chapter will present a discussion on globalisation and its impact on the world of work, in particular the changes on particular demographic groups in both developed and developing economies. It will then discuss implications for workers and their careers, specifically focusing on changing relationships between workers and organisations and the need for individuals to maintain their competitive edge in the market place through an ongoing focus on relevant career management competencies.

The impact of change on careers in the 21st century : what do individuals need to do

There is a growing literature (Arthur, Inkson, & Pringle, 1999; Collin & Young, 2000; Hall & Associates, 1996; Peiperl, Arthur,& Anand, 2002) about the changing workplace and the consequent changes to our understanding of the place of career in individuals’ lives (Richardson, 1996, 2000) - “Careers are becoming more varied and more difficult to manage for both individuals and organisations” (Arnold et al, 2005, p. 523). This chapter will present the background to the changes in the world of work and the changes which inevitably impact individuals’ careers. It will then focus on the close relationship between career development and lifelong learning and the importance of ongoing professional learning for individuals to maintain employability in a changing work world.

Diversity of accuracy profiles for absolute pitch recognition

Most advanced musicians are able to identify and label a heard pitch if given an opportunity to compare it to a known reference note. This is called ‘relative pitch’ (RP). A much rarer skill is the ability to identify and label a heard pitch without the need for a reference. This is colloquially referred to as ‘perfect pitch’, but appears in the academic literature as ‘absolute pitch’ (AP). AP is considered by many as a remarkable skill. As people do not seem able to develop it intentionally, it is generally regarded as innate. It is often seen as a unitary skill and that a set of identifiable criteria can distinguish those who possess the skill from those who do not. However, few studies have interrogated these notions. The present study developed and applied an interactive computer program to map pitch-labelling responses to various tonal stimuli without a known reference tone available to participants. This approach enabled the identification of the elements of sound that impacted on AP. Pitch-labelling responses of 14 participants with AP were recorded for their accuracy. Each participant’s response to the stimuli was unique. Their accuracy of labelling varied across dimensions such as timbre, range and tonality. The diversity of performance between individuals appeared to reflect their personal musical experience histories.

Effective web service discovery using a combination of a semantic model and a data mining technique

With the advent of Service Oriented Architecture, Web Services have gained tremendous popularity. Due to the availability of a large number of Web services, finding an appropriate Web service according to the requirement of the user is a challenge. This warrants the need to establish an effective and reliable process of Web service discovery. A considerable body of research has emerged to develop methods to improve the accuracy of Web service discovery to match the best service. The process of Web service discovery results in suggesting many individual services that partially fulfil the user’s interest. By considering the semantic relationships of words used in describing the services as well as the use of input and output parameters can lead to accurate Web service discovery. Appropriate linking of individual matched services should fully satisfy the requirements which the user is looking for. This research proposes to integrate a semantic model and a data mining technique to enhance the accuracy of Web service discovery. A novel three-phase Web service discovery methodology has been proposed. The first phase performs match-making to find semantically similar Web services for a user query. In order to perform semantic analysis on the content present in the Web service description language document, the support-based latent semantic kernel is constructed using an innovative concept of binning and merging on the large quantity of text documents covering diverse areas of domain of knowledge. The use of a generic latent semantic kernel constructed with a large number of terms helps to find the hidden meaning of the query terms which otherwise could not be found. Sometimes a single Web service is unable to fully satisfy the requirement of the user. In such cases, a composition of multiple inter-related Web services is presented to the user. The task of checking the possibility of linking multiple Web services is done in the second phase. Once the feasibility of linking Web services is checked, the objective is to provide the user with the best composition of Web services. In the link analysis phase, the Web services are modelled as nodes of a graph and an allpair shortest-path algorithm is applied to find the optimum path at the minimum cost for traversal. The third phase which is the system integration, integrates the results from the preceding two phases by using an original fusion algorithm in the fusion engine. Finally, the recommendation engine which is an integral part of the system integration phase makes the final recommendations including individual and composite Web services to the user. In order to evaluate the performance of the proposed method, extensive experimentation has been performed. Results of the proposed support-based semantic kernel method of Web service discovery are compared with the results of the standard keyword-based information-retrieval method and a clustering-based machine-learning method of Web service discovery. The proposed method outperforms both information-retrieval and machine-learning based methods. Experimental results and statistical analysis also show that the best Web services compositions are obtained by considering 10 to 15 Web services that are found in phase-I for linking. Empirical results also ascertain that the fusion engine boosts the accuracy of Web service discovery by combining the inputs from both the semantic analysis (phase-I) and the link analysis (phase-II) in a systematic fashion. Overall, the accuracy of Web service discovery with the proposed method shows a significant improvement over traditional discovery methods.