Hybrid thermoset polymeric composites – an Innovation towards sustainability

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

PLSR Models for Mechanical Strengths of Concrete Composite Materials Reinforced with Pultrusion Wastes

In this paper, we present two Partial Least Squares Regression (PLSR) models for compressive and flexural strength responses of a concrete composite material reinforced with pultrusion wastes. The main objective is to characterize this cost-effective waste management solution for glass fiber reinforced polymer (GFRP) pultrusion wastes and end-of-life products that will lead, thereby, to a more sustainable composite materials industry. The experiments took into account formulations with the incorporation of three different weight contents of GFRP waste materials into polyester based mortars, as sand aggregate and filler replacements, two waste particle size grades and the incorporation of silane adhesion promoter into the polyester resin matrix in order to improve binder aggregates interfaces. The regression models were achieved for these data and two latent variables were identified as suitable, with a 95% confidence level. This technological option, for improving the quality of GFRP filled polymer mortars, is viable thus opening a door to selective recycling of GFRP waste and its use in the production of concrete-polymer based products. However, further and complementary studies will be necessary to confirm the technical and economic viability of the process.

Sustainable Development Action Plan at ISEP - From Concept to Engineering Practice

Some of the main challenges in Incorporating Sustainable Development practices into Engineering Education reside in establishing the bridge between concept and application. In particular the relation between value creation and the knowledge economy, innovation and entrepreneurship, as the main vehicles to a relevant application of the sustainable development concept, is not yet part of the majority of the engineering curricula in schools. Porto Polytechnical Engineering School (ISEP), a Global Reporting Initiative training partner in Portugal, as just presented its Sustainable Development Action Plan, with the main objective of creating a new kind of engineers, with Sustainable Development at the core of their degrees. The plan has several issues like publish an annual sustainability report, sustainable buildings, minimization of energy consumption and water policy, waste management, sustainable mobility, green procurement, EMAS certification, research and postgraduate activity and promotion of lectures and seminars in Sustainable Development.

Guia para a descconstrução de edifícios

Num passado relativamente recente, o processo de demolição tem experimentado várias mudanças, que incidem principalmente na forma como o edifício ou estrutura vai ser demolido. Mais recentemente, o surgimento das preocupações ambientais levam hoje a falar de "desconstrução", em função do prejuízo das demolições. O termo desconstrução é usado para descrever o processo de desmantelamento e remoção seletiva de materiais de construção em vez da demolição tradicional. O sucesso da desconstrução vem em função do planeamento antecipado, da aplicação contínua das regras de segurança e da formação e informação para todos os trabalhadores. A triagem de materiais de demolição é de certa forma imposta pela preocupação das empresas que contribuem para a economia de recursos naturais. Esta metodologia é uma melhoria contínua, porém muito mais diversificados os materiais obtidos e a sua heterogeneidade. A correta gestão do fluxo de resíduos de construção e demolição é importante e o seu interesse na reciclagem de resíduos tem aumentado constantemente. Esse interesse é dirigido pelo grande volume desses materiais, os custos associados e uma maior consciência das oportunidades de reciclar. Auxiliando também no desenvolvimento dos mercados locais para os resíduos, tanto para os materiais que são diretamente reutilizados, como os que são reciclados, sendo novamente aplicados na construção civil. Esta dissertação aborda os métodos comummente utilizados na demolição de edifícios que dão mais atenção ao planeamento e execução dos trabalhos de demolição, garantindo a segurança no local de trabalho.

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Auditoria à gestão de resíduos industriais

A presente dissertação foi realizada em colaboração com o grupo empresarial Monteiro, Ribas, tendo como principal objectivo a realização de uma auditoria à gestão dos resíduos industriais produzidos pelas suas fábricas localizadas na Estrada da Circunvalação, no Porto. Para cumprir este objectivo, inicialmente foi efectuado um levantamento das obrigações legais relativas aos resíduos e foram procuradas práticas aconselhadas para a gestão interna. Para cada uma das fábricas, verificaram-se, quais os resíduos produzidos e analisaram-se os seus percursos, considerando as suas origens, os locais e modos de acondicionamento na origem, os modos de transporte interno, os locais e modos de armazenagem preliminar, e ainda, as quantidades produzidas, os transportadores, os operadores finais e as operações finais de gestão, sendo que estas quatro últimas informações são relativas ao ano 2013. De seguida procedeu-se à realização da auditoria nas diferentes unidades, verificando o cumprimento dos requisitos legais e das boas práticas em matéria de gestão de resíduos. As principais não conformidades detectadas, comuns às várias unidades fabris foram a inexistência de local/recipiente definido para acondicionamento de alguns resíduos, a falta ou insuficiente identificação de recipientes/zonas de acondicionamento, a inexistência de bacias de retenção para resíduos líquidos perigosos, o facto de no transporte interno apenas os resíduos perigosos serem cobertos e, os resíduos líquidos perigosos não serem transportados sobre bacias de retenção móveis nem com o material necessário para absorver derrames. Para cada resíduo e para cada unidade industrial foram propostas medidas correctivas e/ou de melhoria, quando aplicável. Relativamente à armazenagem preliminar, a principal inconformidade detectada foi o facto de todos os parques (quatro) possuírem resíduos perigosos no momento das auditorias, o que não é adequado. Foram propostas medidas correctivas e/ou de melhoria para cada parque. Como proposta global, tendo em conta factores económicos e de segurança, sugeriu-se que apenas o parque de resíduos perigosos possa armazenar este tipo de resíduos, pelo que os procedimentos de transporte interno devem ser melhorados, fazendo com que estes resíduos sejam transportados directamente para o parque de resíduos perigosos. Desta forma dois dos parques devem sofrer algumas remodelações, nomeadamente serem cobertos e fechados, ainda que não totalmente, e o parque de resíduos perigosos deve ser fechado, mantendo aberturas para ventilação, deve ser equipado com kit´s de contenção de derrames, fichas de segurança, procedimentos a realizar em caso de emergência, e ainda, devido ao facto do sistema de contenção de derrames ser pequeno face ao total de armazenamento, aconselha-se o uso de bacias de retenção para alguns dos recipientes de resíduos líquidos perigosos. Ao longo deste processo e em consequência da realização da auditoria, algumas situações consideradas não conformes foram sendo corrigidas. Também foram preparadas instruções de trabalho adequadas que serão posteriormente disponibilizadas. Foi ainda elaborada uma metodologia de avaliação de processos como base de trabalho para redução dos resíduos gerados. A etapa escolhida para a aplicação da mesma foi uma etapa auxiliar do processo produtivo da Monteiro, Ribas - Revestimentos, S.A - a limpeza de cubas com solventes, por forma a tentar minimizar os resíduos de solventes produzidos nesta operação. Uma vez que a fábrica já realiza a operação tendo em consideração medidas de prevenção e reutilização, a reciclagem é neste momento a única forma de tentar minimizar os resíduos de solventes. Foram então estudadas duas opções, nomeadamente a aquisição de um equipamento de regeneração de solventes e a contratação de uma operadora que proceda à regeneração dos resíduos de solventes e faça o retorno do solvente regenerado. A primeira opção poderá permitir uma redução de cerca de 95% na produção de resíduos de solventes e na aquisição de solvente puro, estimando-se uma poupança anual de cerca de **** €, com um período de recuperação do capital de cerca de 16 meses e a segunda pode conduzir a uma redução significativa na aquisição de solvente puro, cerca de 65%, e a uma poupança anual de cerca de **** €.

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Análise comparativa da designação, definição e classificação de resíduos hospitalares em legislações da União Europeia

RESUMO - O quadro legislativo de um país, no que concerne aos resíduos hospitalares (RH), contém a sua designação, definição e classificação. É essa a matriz de referência para a separação efectuada na origem e todo o circuito que, a partir desse momento, um determinado resíduo toma até ao seu tratamento. Assim, faz-se o estudo comparativo das definições e tipos de classificação de RH em quatro países da União Europeia: Alemanha, Reino Unido, Espanha (Região Autónoma da Catalunha) e Portugal. Reconhecem-se as diferentes designações deste tipo de resíduos e discute-se o seu significado e as suas implicações na percepção de risco por parte dos profissionais e do público. Identificam-se duas estratégias subjacentes à elaboração das definições: a contaminação de materiais com microrganismos patogénicos bem definidos, as suas fontes e as actividades que os produzem. Apresentam-se as classificações de RH propostas pelos organismos internacionais de referência e analisa-se comparativamente a evolução do enquadramento legal português e da Região Autónoma da Catalunha, evidenciando-se a variabilidade temporal e justificando-se a necessidade de se efectuar o estudo da variabilidade geográfica. Utilizam-se três critérios para a análise das classificações consideradas: a concordância definição-classificação, o número e tipo de grupos das classificações e os tipos de resíduos por grupos. Identificam-se os denominadores comuns às classificações analisadas, assim como as suas principais diferenças. Conclui-se que a definição de RH adoptada por cada país condiciona o tipo de classificação de RH nesse mesmo país. Verifica-se ainda que a inexistência de critérios claros de avaliação da contaminação pode dificultar a tarefa da triagem dos RH por parte dos profissionais de saúde.

Deliberative Democracy and Precautionary Public Reasoning : Exploratory Thoughts

article

L'application du principe du pollueur-payeur à la gestion du risque environnemental et à la mutualisation des coûts de la pollution

Le but de cette étude est de déterminer qui paie pour le risque de pollution et par conséquent de vérifier si le principe du pollueur-payeur est effectivement mis en œuvre dans le domaine de la gestion du risque environnemental. Il s’agit d’examiner le degré de mutualisation de la gestion du risque dans différentes législations particulière. Les payeurs peuvent a priori se classer dans quatre catégories : les personnes dont l’activité contribue au risque de pollution, les compagnies d’assurance qui acceptent d’assurer ces personnes, les organismes ou autorités publics et les tiers. Divers exemples issus de la législation belge ou européenne seront examinés afin de déterminer s’ils sont conformes à la lettre et/ou à l’esprit du principe pollueur-payeur. Il s’agit notamment de la responsabilité civile, de la responsabilité environnementale, de la gestion des déchets et du marché de quotas d’émissions de gaz à effet de serre. Les techniques de responsabilité qui interviennent après que le dommage ait lieu et requièrent la démonstration de l’existence d’un lien de causalité ne permettent pas toujours d’assurer pleinement la fonction préventive du principe du pollueur-payeur. Elles ne constituent pas des instruments adéquats de gestion de la pollution diffuse ou chronique. En conséquence, des techniques de mutualisation de la gestion du risque environnemental se sont développées. Le recours à ces techniques de mutualisation (par le recours à l’assurance, aux fonds publics financés par la fiscalité environnementale ou aux marchés de droit d’émissions) est-il conforme au principe pollueur-payeur et permet-il d’atteindre l’objectif d’un niveau élevé de protection de l’environnement ? L’effet dissuasif du principe pollueur-payeur n’est-il pas amoindri par la mutualisation ? L’article montre que la définition du principe pollueur-payeur par la Cour de Justice de l’Union européenne est centrée sur la contribution au risque de pollution ce qui permet de recourir aux techniques de mutualisation de la gestion du risque tout en respectant le Traité sur le fonctionnement de l’Union européenne. 

Les considérations environnementales dans l'arbitrage d'investissement sous l'égide du CIRDI

L’arbitrage international, outre le recours aux tribunaux de l’État hôte, est la méthode la plus utilisée pour régler les différends relatifs aux investissements étrangers. Plusieurs accords internationaux d’investissement incluent des dispositions ayant trait à l’arbitrage sous l’égide du Centre International pour le Règlement des Différends relatifs aux Investissements (CIRDI) mis en place par la Convention de Washington de 1966. Les tribunaux arbitraux constitués sous l’égide du Centre sont ainsi appelés à trancher des différends qui concernent la conduite d’États hôtes vis-à-vis ses investisseurs étrangers ; leurs décisions ayant de fortes conséquences sur l’intérêt public, concrètement lorsqu’il s’agit de la protection de l’environnement. L’évolution croissante du droit environnemental et son empiètement sur la protection des investissements a déclenché une série de différends qui ne se limitent plus à mettre en cause des nationalisations ou des violations de contrats - comme auparavant - mais tournent souvent autour de mesures étatiques de politique publique qui impliquent des questions sensibles telles que, inter alia, la gestion de déchets dangereux, l’accès à l’eau potable, l’étalement urbain, la protection de la biodiversité. Par conséquent, le rôle des tribunaux CIRDI et de leurs décisions devient décisif dans le développement du droit des investissements et dans le débat sur la protection des investissements face aux mesures législatives en matière environnementale. Cette étude a pour objet d’analyser la place des considérations environnementales dans les sentences arbitrales CIRDI. Spécifiquement, il s’agit d’étaler les principaux arguments retenus par les tribunaux internationaux, et de dégager les grandes tendances jurisprudentielles en matière d’arbitrage international d’investissements face aux mesures environnementales.

A Study On The Utilisation Of Plastic Wastes In Stabilised Masonry Blocks

At this era of energy crisis and resource depletion, availability of conventional materials throughout the year in quantity and quality, pose a hectic problem for the builders. Adding fuel to the fire, the demand of these materials increases day by day, since the housing and habitat requirements exponentially increase time to time. There is an international concern over this crisis and researchers are reorienting themselves, so as to evolve appropriate masonry units, using locally available cheap materials and technology. The concept of green material and construction has been well conceived in the research so that marginal materials and unskilled labour can be employed for the mass production of building blocks. In this context, considering earth as a sustainable material, there is a growing interest in the use of it, as a modern construction material. Solid waste management is one of the current major environmental concerns in our country. Our country is left with millions of cubic metre of waste plastics. One of the methods to satisfactorily address this solid waste management and the environmental issues is to suitably accommodate the waste in some form (as fibres). Their employability in block making in the form of fibres (plastic fibre- mud blocks) can be investigated through a fundamental research. Also, the review of the existing literature shows that most studies on natural fibres are focussed on cellulose based/ vegetable fibres obtained from renewable plant resources except in very few cases, where animal fibre, plastic fibre and polystyrene fabric were used. At this context, for the plastic fibre-mud blocks to be more widely applicable, a systematic quantification of the relevant physical and mechanical properties of the fibre masonry units is crucial, to enable an objective evaluation of the composite material’s response to actual field condition. This research highlights the salient observations from the detailed investigation of a systematic study on the effect of embedded fibres, made of plastic wastes on the performance of stabilised mud blocks.

An Inquiry of Changes in Environmental Governance by Community-driven Process

Urban environmental depletion has been a critical problem among industrialized-transformed societies, especially at the local level where administrative authorities’ capacity lags behind changes. Derived from governance concept, the idea of civil society inclusion is highlighted. Focusing on an agglomerated case study, Bang Plee Community in Thailand, this research investigates on a non-state sector, 201-Community organization, as an agent for changes to improve urban environments on solid waste collection. Two roles are contested: as an agent for neighborhood internal change and as an intermediary toward governance changes in state-civil society interaction. By employing longitudinal analysis via a project intervention as research experiment, the outcomes of both roles are detected portrayed in three spheres: state, state-civil society interaction, and civil society sphere. It discovers in the research regarding agglomerated context that as an internal changes for environmental betterment, 201-Community organization operation brings on waste reduction at the minimal level. Community-based organization as an agent for changes – despite capacity input it still limited in efficiency and effectiveness – can mobilize fruitfully only at the individual and network level of civil society sectors, while fails managing at the organizational level. The positive outcomes result by economic waste incentive associated with a limited-bonded group rather than the rise of awareness at large. As an intermediary agent for shared governance, the community-based organization cannot bring on mutual dialogue with state as much as cannot change the state’s operation arena of solid waste management. The findings confine the shared governance concept that it does not applicable in agglomerated locality as an effective outcome, both in terms of being instrumental toward civil society inclusion and being provocative of internal change. Shared environmental governance as summarized in this research can last merely a community development action. It distances significantly from civil society inclusion and empowerment. However, the research proposes that community-based environmental management and shared governance toward civil society inclusion in urban environmental improvement are still an expectable option and reachable if their factors and conditions of key success and failure are intersected with a particular context. Further studies demand more precise on scale, scope, and theses factors of environmental management operation operated by civil society sectors.