Integrated techno-economic and environmental assessments of sixty scenarios for co-firing biomass with coal and natural gas

Displacement of fossil fuel-based power through biomass co-firing could reduce the greenhouse gas (GHG) emissions from fossil fuels. In this study, data-intensive techno-economic models were developed to evaluate different co-firing technologies as well as the configurations of these technologies. The models were developed to study 60 different scenarios involving various biomass feedstocks (wood chips, wheat straw, and forest residues) co-fired either with coal in a 500 MW subcritical pulverized coal (PC) plant or with natural gas in a 500 MW natural gas combined cycle (NGCC) plant to determine their technical potential and costs, as well as to determine environmental benefits. The results obtained reveal that the fully paid-off coal-fired power plant co-fired with forest residues is the most attractive option, having levelized costs of electricity (LCOE) of $53.12–$54.50/MW h and CO2 abatement costs of $27.41–$31.15/tCO2. When whole forest chips are co-fired with coal in a fully paid-off plant, the LCOE and CO2 abatement costs range from $54.68 to $56.41/MW h and $35.60 to $41.78/tCO2, respectively. The LCOE and CO2 abatement costs for straw range from $54.62 to $57.35/MW h and $35.07 to $38.48/tCO2, respectively.

Techno-Economic Feasibility of Selective CO2 Capture Processes from Biogas Streams using Ionic Liquids as Physical Absorbents

Biogas from anaerobic digestion of sewage sludge is a renewable resource with high energy content, which is formed mainly of CH4 (40-75 vol.%) and CO2 (15-60 vol.%) Other components such as water (H2O, 5-10 vol.%) and trace amounts of hydrogen sulfide and siloxanes can also be present. A CH4-rich stream can be produced by removing the CO2 and other impurities so that the upgraded bio-methane can be injected into the natural gas grid or used as a vehicle fuel. The main objective of this paper is to develop a new modeling methodology to assess the technical and economic performance of biogas upgrading processes using ionic liquids which physically absorb CO2. Three different ionic liquids, namely the 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, 1-hexyl-3-methylimidazoliumbis[(trifluoromethyl)sulfonyl]imide and trihexyl(tetradecyl)phosphonium bis[(trifluoromethyl)sulfonyl]imide, are considered for CO2 capture in a pressure-swing regenerative absorption process. The simulation software Aspen Plus and Aspen Process Economic Analyzer is used to account for mass and energy balances as well as equipment cost. In all cases, the biogas upgrading plant consists of a multistage compressor for biogas compression, a packed absorption column for CO2 absorption, a flash evaporator for solvent regeneration, a centrifugal pump for solvent recirculation, a pre-absorber solvent cooler and a gas turbine for electricity recovery. The evaluated processes are compared in terms of energy efficiency, capital investment and bio-methane production costs. The overall plant efficiency ranges from 71-86 % whereas the bio-methane production cost ranges from £6.26-7.76 per GJ (LHV). A sensitivity analysis is also performed to determine how several technical and economic parameters affect the bio-methane production costs. The results of this study show that the simulation methodology developed can predict plant efficiencies and production costs of large scale CO2 capture processes using ionic liquids without having to rely on gas solubility experimental data.

Beyond the artefact and techno-centricity: towards process-centric understanding of architecture - alternative facilitation strategies and proposals

The artefact and techno-centricity of the research into the architecture process needs to be counterbalanced by other approaches. An increasing amount of information is collected and used in the process, resulting in challenges related to information and knowledge management, as this research evidences through interviews with practicing architects. However, emerging technologies are expected to resolve many of the traditional challenges, opening up new avenues for research. This research suggests that among them novel techniques addressing how architects interact with project information, especially that indirectly related to the artefacts, and tools which better address the social nature of work, notably communication between participants, become a higher priority. In the fields associated with the Human Computer Interaction generic solutions still frequently prevail, whereas it appears that specific alternative approaches would be particularly in demand for the dynamic and context dependent design process. This research identifies an opportunity for a process-centric and integrative approach for architectural practice and proposes an information management and communication software application, developed for the needs discovered in close collaboration with architects. Departing from the architects’ challenges, an information management software application, Mneme, was designed and developed until a working prototype. It proposes the use of visualizations as an interface to provide an overview of the process, facilitate project information retrieval and access, and visualize relationships between the pieces of information. Challenges with communication about visual content, such as images and 3D files, led to a development of a communication feature allowing discussions attached to any file format and searchable from a database. Based on the architects testing the prototype and literature recognizing the subjective side of usability, this thesis argues that visualizations, even 3D visualizations, present potential as an interface for information management in the architecture process. The architects confirmed that Mneme allowed them to have a better project overview, to easier locate heterogeneous content, and provided context for the project information. Communication feature in Mneme was seen to offer a lot of potential in design projects where diverse file formats are typically used. Through empirical understanding of the challenges in the architecture process, and through testing the resulting software proposal, this thesis suggests promising directions for future research into the architecture and design process.

Green economy: fix our 'ends' not just our 'means'

While growth remains as our main goal economic and environmental crisis will persist. A green economy requires us to aim at development rather than growth, through the responsible promotion of justice, the common good, and environmental sustainability.

Arrêt du conseil d'Etat qui proge le délai fixé par arrêt du 29 septembre 1711, pour dix mois, pour le paiement tant du principal et intérêts des billets faits par les cautions d'Et. Rey, pour raison ou traité des trésoriers-payeurs des chancelleries, que pour le principal de ceux faits pour les autres traités

[Acte. 1712-03-22. Versailles]

Estudi hidrodinàmic per elements finits de diferents pales simètriques per a la impulsió a rem en banc fix

Actualment l’esport del rem només s’entén com a activitat de lleure o esport de competició. Dins del rem, hi ha una gran varietat de disciplines esportives; totes coincideixen en l’impuls d’una embarcació mitjançant un sistema de palanques simple. Es diferencien en dos grans grups: el banc mòbil i el banc fix. El banc mòbil disposa d’un seient sobre rodes que permet aprofitar la força de les cames per la impulsió, en canvi, en el banc fix, no hi ha desplaçament del seient, el que implica el treball del tors i braços. Un dels punts que tenen en comú tot el banc fix, és el disseny del seu rem; a diferència del banc mòbil on la pala pot tenir el disseny que es vulgui. En banc fix la pala del rem ha de ser simètrica i alineada amb la canya del rem. L’objectiu d’aquest projecte és l’anàlisi hidrodinàmic de diferents models de pales simètriques per tal de determinar el model més eficient, des del punt de vista hidrodinàmic, per a la impulsió de l’embarcació de banc fix. Així, es simularan virtualment diferents models de pales simètriques disponibles en el mercat com models prototipus amb un programa de dinàmica de fluids computacional. L’anàlisi dels resultats determinarà el model més eficient. En la realització del projecte, l’estudi hidrodinàmic es realitzarà de manera virtual a partir de la utilització de programes comercials de dinàmica de fluids. Així com també programes de disseny 3D i programes de mallat que siguin compatibles amb el programa de simulació a utilitzar. En el disseny s’utilitzaran programes com Autocad i Rhinoceros, després, en funció del disseny, utilitzarem un programa d’elements finits anomenat ICEM ANSYS que mallarà la geometria emprada. Finalment, la simulació s’efectuarà amb el programa ANSYS CFX. L’estudi no preveu el càlcul de resistència mecànica dels models ni la seva construcció

Dibujo técnico, Techno, Sexante : ESO y Bachillerato.

Resumen basado en el de la publicación