Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

Supplier relationship management capability in the firm's global integration

Organizing is a general problem for global firms. Firms are seeking a balance between responsiveness at the local level and efficiency through worldwide integration. In this, supply management is the focal point where external commercial supply market relations are connected with the firm's internal functions. Here, effective supplier relationship management (SRM) is essential. Global supply integration processes create new challenges for supply management professionals and new capabilities are required. Previous research has developed several models and tools for managers to manage and categorize different supplier relationship types, but the role of the firm's internal capability of managing supplier relationships in their global integration has been a clearly neglected issue. Hence, the main objective of this dissertation is to clarify how the capability of SRM may influence the firm's global competitiveness. This objective is divided into four research questions aiming to identify the elements of SRM capability, the internal factors of integration, the effect of SRM capability on strategy and how SRM capability is linked with global integration. The dissertation has two parts. The first part presents the theoretical approaches and practical implications from previous research and draws a synthesis on them. The second part comprises four empirical research papers addressing the research questions. Both qualitative and quantitative methods are utilized in this dissertation. The main contribution of this dissertation is that it aggregates the theoretical and conceptual perspectives applied to SRM research. Furthermore, given the lack of valid scales to measure capability, this study aimed to provide a foundation for an SRM capability scale by showing that the construct of SRM capability is formed of five separate elements. Moreover, SRM capability was found to be the enabler in efforts toward value chain integration. Finally, it was found that the effect of capability on global competitiveness is twofold: it reduces conflicts between responsiveness and integration, and it creates efficiency. Thus, by identifying and developing the firm's capabilities it is possible to improve performance, and hence, global competitiveness.

FEMA’s Capability Development After Katrina

After Action Reports for Hurricane Isaac & Sandy concluded that WebEOC was correct choice for FEMA’s Crisis Management System: real time data easily shared between FEMA Headquarters, Regions and Incident Management Assistance Teams; cloud capability allowed use on any web connected device, laptop, tablet, iPad, smart phone; intuitive System - Offgoing personnel able to train incoming reliefs on new features or changes within minutes; widespread use of WebEOC through out country in 19 other Federal Departments and Agencies, 40 States, hundreds of cities/counties and industry provided a number of users that had prior experience using WebEOC and reduced learning curve experienced when new systems are introduced; focusing on a single shared web database reduced creation of new single purpose databases, spreadsheets and share point sites allowing best practices to be captured, refined, shared and continued

Diagnosing and developing knowledge management capability –Knowledge management capability in UPM-Kymmene Wood Oy

The purpose of this case study is to clarify how KM (knowledge management) capability is constructed through six different activities and to explore how this capability can be diagnosed and developed in the three case organizations. The study examines the knowledge management capability of the three factories in UPM-Kymmene Wood Oy, a major Finnish plywood producer. Forest industry is usually considered to be quite hierarchical. The importance of leveraging employee skills and knowledge has been recognized in all types of organizations – including those that mainly deal with tangible resources. However, the largest part of empirical knowledge management literature examines KM in so called knowledge-intensive or knowledge-based organizations. This study extends existing literature by providing an in depth case study into assessment and development of KM activities in these three organizations with little awareness of the KM discourse. This subject is analyzed through literature review, theoretical analysis and empirical research in the case organizations. The study also presents a structured method for evaluating KM activities of a company and for diagnosing the main weaknesses that should be developed in order to achieve KM excellence. The results help in understanding how knowledge management capability is constructed and provide insight into developing and exploiting it within an organization.

Supply management capability

The objective of this thesis is to define supply management capability. The thesis study what factors consist of supply management capability, and which of those factors are critical to achieving competitive advantage. One objective is also to study how firms can measure their supply management capability. This study is a qualitative research. The thesis examines the literature regarding to supply management and the context of capability and there are used Delphi panel to examine the current and future insights of supply management professionals concerning of supply management skills and capability. The empirical data of the thesis was collected by interviews. The Delphi panel was used in data collection and analysis and for prioritization of the factors of supply management capability. The thesis includes lists of factors of supply management capability. Main findings of the study were that there is no one clear, generally suitable set of supply management skills which bring competitive advantage for all firms and the most important factors of supply management capability, according to the experts, are total cost analysis, customer focus, general business view, market knowledge and supplier relationships. In this study the supply management capability is defined as organization’s overall capacity and ability to achieve a holistic understanding of purchasing needs, manage its suppliers and collaborative partners, and conduct its internal tasks, routines and responsibilities in a way that achieves desired results. The results of this thesis show also that Finnish firms need more right kind of supply management knowledge.

Strategic Airlift Capability (SAC) Puolustusvoimien kolmen päätehtävän näkökulmasta

Tutkimuksessa tarkasteltiin vuonna 2009 toimintansa käynnistävää kansainvälistä ilmakuljetusyhteistyöhankketta Strategic Airlift Capability (SAC) puolustusvoimien kolmen päätehtävän näkökulmasta. Strategic Airlift Capability on 10 Nato-maan sekä Ruotsin ja Suomen välinen yhteistyösopimus, jolla varmistetaan raskas ilmakuljetuskyky jäsenmaiden käyttöön seuraavaksi 26 vuodeksi. Raskas ilmakuljetuskyky tuotetaan kolmella SAC-järjestelyn jäsenmaiden yhteisesti omistamalla Boeing C-17 Globemaster III strategisella kuljetuslentokoneella. Tutkimuksen päätutkimuskysymys oli seuraava: Mitkä ovat keskeisimmät SAC-järjestelyn mahdollisuudet ja haasteet puolustusvoimien kolmen päätehtävän näkökulmasta ja mitä toimenpiteitä nämä edellyttävät puolustusvoimilta? Tutkimus oli luonteeltaan kvalitatiivinen. Tutkimusmenetelmänä käytettiin logistiikan tutkimukseen hyvin soveltuvaa abduktio-menetelmää, jossa teorian kehittäminen ja empiirisen tutkimusaineiston analysointi ja testaus vuorottelevat. Tutkimusasetelma oli hermeneuttinen. Tutkimusaineiston analysoinnissa käytettiin menetelmänä aineistopohjaista sisällönanalyysiä. Kahdella Delfoi-menetelmään perustuvalla kyselyllä selvitettiin puolustushallinnon sekä muiden hallinnonalojen ja siviilitoimijoiden näkemyksiä SAC-järjestelystä. Tutkimuksen yhtenä menetelmänä oli SWOT-analyysi.

Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Predictive Capability of HPV and Pap Tests in Screening for Cervical Cancer over a Three-Year Follow-up

Purpose To compare the predictive capability of HPV and Pap smear tests for screening pre-cancerous lesions of the cervix over a three-year follow-up, in a population of users of the Brazilian National Health System (SUS). Methods This is a retrospective cohort study of 2,032 women with satisfactory results for Pap smear and HPV tests using second-generation hybrid capture,made in a previous study. We followed them for 36 months with data obtained from medical records, the Cervix Cancer Information System (SISCOLO), and the Mortality Information System (SIM). The outcome was a histological diagnosis of cervical intraepithelial neoplasia grade 2 or more advanced lesions (CIN2ş). We constructed progression curves of the baseline test results for the period, using the Kaplan-Meier method, and estimated sensitivity, specificity, positive and negative predictive value, and positive and negative likelihood ratios for each test. Results A total of 1,440 women had at least one test during follow-up. Progression curves of the baseline test results indicated differences in capability to detect CIN2ş (p < 0.001) with significantly greater capability when both tests were abnormal, followed by only a positive HPV test. The HPV test was more sensitive than the Pap smear (88.7% and 73.6%, respectively; p < 0.05) and had a better negative likelihood ratio (0.13 and 0.30, respectively). Specificity and positive likelihood ratio of the tests were similar. Conclusions These findings corroborate the importance of HPV test as a primary cervical cancer screening.

Integration of existing military capability models into the Comprehensive Capability Meta-model

Abstract—This paper discusses existing military capability models and proposes a comprehensive capability meta-model (CCMM) which unites the existing capability models into an integrated and hierarchical whole. The Zachman Framework for Enterprise Architecture is used as a structure for the CCMM. The CCMM takes into account the abstraction level, the primary area of application, stakeholders, intrinsic process, and life cycle considerations of each existing capability model, and shows how the models relate to each other. The validity of the CCMM was verified through a survey of subject matter experts. The results suggest that the CCMM is of practical value to various capability stakeholders in many ways, such as helping to improve communication between the different capability communities.

The holistic military capability life cycle model

Abstract - This paper reviews existing military capability models and the capability life cycle. It proposes a holistic capability life-cycle model (HCLCM) that combines capability systems with related capability models. ISO 15288 standard is used as a framework to construct the HCLCM. The HCLCM also shows how capability models and systems relate to each other throughout the capability life cycle. The main contribution of this paper is conceptual in nature. The model complements the existing, but still evolving, understanding of the military capability life cycle in a holistic and systemic way. The model also increases understanding and facilitates communication among various military capability stakeholders.

Introduction of the T-10 static line parachuting capability to the NH90 helicopter

The purpose of this study was to investigate the suitability of the Finnish Defence Forces’ NH90 helicopter for parachuting operations with the T-10 static line parachute system. The work was based on the Army Command’s need to compensate for the reduction in the outsourced flight hours for the military static line parachuting training. The aim of the research was to find out the procedures and limitations with which the NH90 IOC+ or FOC version helicopter could be used for static line parachutist training with the T-10B/MC1-1C parachutes. The research area was highly complicated and non-linear. Thus analytical methods could not be applied with sufficient confidence, even with present-day computing power. Therefore an empirical research method was selected, concentrating on flight testing supported with literature study and some calculated estimations. During three flights and 4.5 flight hours in Utti, Finland on 1720 September 2012, a total of 44 parachute drops were made. These consisted of 16 dummy drops and 28 paratrooper jumps. The test results showed that when equipped with the floor mounted PASI-1 anchor line, the deflector bar of the NHIndustries’ Parachuting Kit and Patria’s floor protection panels the Finnish NH90 variant could be safely used for T-10B/MC1-1C static line parachuting operations from the right cabin door at airspeed range of 5080 KIAS (90–150 km/h). The ceiling mounted anchor lines of the NHI’s Parachuting Kit were not usable with the T-10 system. This was due to the static lines’ unsafe behaviour in slipstream when connected to the cabin ceiling level. In conclusion, the NH90 helicopter can be used to meet the Army Command’s requirement for an additional platform for T-10 static line parachutist training. Material dropping, the effect of additional equipment and jumping from the rear ramp should be further studied.

Introduction of the T-10 static line parachuting capability to the NH90 helicopter

The purpose of this study was to investigate the suitability of the Finnish Defence Forces’ NH90 helicopter for parachuting operations with the T-10 static line parachute system. The work was based on the Army Command’s need to compensate for the reduction in the outsourced flight hours for the military static line parachuting training. The aim of the research was to find out the procedures and limitations with which the NH90 IOC+ or FOC version helicopter could be used for static line parachutist training with the T- 10B/MC1-1C parachutes. The research area was highly complicated and non-linear. Thus analytical methods could not be applied with sufficient confidence, even with present-day computing power. Therefore an empirical research method was selected, concentrating on flight testing supported with literature study and some calculated estimations. During three flights and 4.5 flight hours in Utti, Finland on 17−20 September 2012, a total of 44 parachute drops were made. These consisted of 16 dummy drops and 28 paratrooper jumps. The test results showed that when equipped with the floor mounted PASI-1 anchor line, the deflector bar of the NHIndustries’ Parachuting Kit and Patria’s floor protection panels the Finnish NH90 variant could be safely used for T-10B/MC1-1C static line parachuting operations from the right cabin door at airspeed range of 50−80 KIAS (∼90–150 km/h). The ceiling mounted anchor lines of the NHI’s Parachuting Kit were not usable with the T-10 system. This was due to the static lines’ unsafe behaviour in slipstream when connected to the cabin ceiling level. In conclusion, the NH90 helicopter can be used to meet the Army Command’s requirement for an additional platform for T-10 static line parachutist training. Material dropping, the effect of additional equipment and jumping from the rear ramp should be further studied.

Performance management through innovation capability in SMEs

Small and medium-sized enterprises (SMEs) are assuredly important to maintain strong economic growth. How to manage and maintain SMEs’ performance is a sizable challenge, and requires an understanding of the drivers of performance. Innovation capability has been suggested to be one of these key drivers. In order to manage innovation capability– performance relationship, it has to be measured. SMEs may have distinct characteristics that separate them being just smaller versions of large firms. Performance measurement and management of innovation capability is challenging, because SMEs usually have some drawbacks compared to large firms. Thus, it is unclear whether theories developed to understand large firms apply to SMEs. This research contributes to the existing discussion on performance management through innovation capability in the SME context. First, it aims at increasing understanding of the role of innovation capability in performance management. Second, it aims at clarifying the role of performance measurement in developing innovation capability. Thus, the main objective of the research is to study how to manage performance through measuring and managing innovation capability. The thesis is based on five research articles that follow a positivist approach. From a methodological point of view, quantitative and complementing conceptual methods of data collection are utilized. This research indicates that the performance management and measurement play a significant role in innovation capability in SMEs. This research makes three main contributions. First, it gives empirical evidence on the connection between innovation capability and SME performance. Second, it illustrates the connection between performance measurement and innovation capability. Thirdly, it clarifies how to measure the relationship between innovation capability and performance.