Upconversion emission in Er3+ doped novel bismuthate glass

Novel Er3+-doped bismuth lead strontiam glass was fabricated and characterized, and the absorption spectrum and upconversion spectrum of the glass were studied. The Judd-Ofelt intensity parameters Omega(t)(t = 2, 4, 6) were found to be Omega(2) = 3.27 x 10(-20) cm(2), Omega(4) = 1.15 x 10(-20) cm(2), and Omega(6) = 0.38 x 10(-20) cm(2). The oscillator strength, the spontaneous transition probabilities, the fluorescence branching ratios, and excited state lifetimes were also measured and calculated. The upconversion emission intensity varies with the power of infrared excitation intensity. A plot of log I-up vs log I-IR yields a straight line with slope 1.86, 1.88 and 1.85, corresponding to 525, 546, and 657 nm emission bands, respectively, which indicates that a two-photon process for the red and green emission.

Juvenile salmon investigations River Wenning catchment 1981-86

As part of the River Lune juvenile salmonid investigation, a number of sites on the River Wenning catchment were electrofished annually from 1981 - 1985. Particularly low Salmon parr populations were evident for much of the Wenning catchment which has caused some concern. All the Wenning catchment electrofishing results are reported in this paper and comparisons are made with designated groups of sites on the remainder of the Lune catchment. These groups of sites are: River Lune and tributaries, upstream Tebay, Upper Middle Lune, Lower Middle Lune, Lower Lune, Birk & Borrow Becks, Chapel & Crosdale Becks, Rawthey system, Barbon & Leek Becks and the Greta system. The general scarcity of Salmonids in large sections of the main river Wenning probably reflects the apparent limited natural spawning areas on the catchment. Details of Salmon fry and ova planting on the Wenning catchment since 1981 have been collated and whilst survival through the 0+ stage appears to be quite good, recruitment to the 1++ stage appears to be poor. Water quality does not appear to be responsible for the very low salmonid densities at some main river sites but is possibly a factor in apparently preventing any Salmon run in Keasden Beck. Recommendations for future Fisheries and Biological work are given.

Species Trends in Sport Fisheries, Monterey Bay, Calif., 1959-86

Three surveys spanning 28 years were examined for changes in species caught by recreational fishermen from small boats (skiffs) and commercial passenger fishing vessels (CPFV's) in California's Monterey Bay region. As fishing effort increased, the catch of certain nearshore species of rockfish, Sebastes spp., declined. CPFV fishing was conducted farther from port and in deeper water to compensate for declining abundance while most skiffs remained in traditional areas close to port. The trend toward deeper water CPFV fishing has been interrupted only temporarily by increased availability of nearshore species. Life history characteristics of rockfish including residential behavior, variable recruitment, and natural longevity contribute to a vulnerability to localized overfishing for several species.

The fabrication of self-aligned InAs nanostructures on GaAs(331)A substrates

Self-aligned InAs quantum wires (QWRs) or three-dimensional (3D) islands are fabricated on GaAs(331)A substrates by molecular beam epitaxy (MBE). InAs QWRs are selectively grown on the step edges formed by GaAs layers. The surface morphology of InAs nanostructures is carefully investigated by atomic force microscopy (AFM) measurements. Different growth conditions, such as substrate temperature, growth approaches, and InAs coverage, exert a great effect on the morphology of InAs islands. Low substrate temperatures favour the formation of wirelike nanostructures, while high substrate temperatures favour 3D islands. The shape transition is attributed to the trade-off between surface energy and strain energy. A qualitative agreement of our experimental data with the theoretical results derived from the model proposed by Tersoff and Tromp is achieved.

Corrugated surfaces formed on GaAs(331)A substrates: the template for laterally ordered InGaAs nanowires

Morphology evolution of high-index GaAs(331)A surfaces during molecular beam epitaxy (MBE) growth has been investigated in order to achieve regularly distributed step-array templates and fabricate spatially ordered low-dimensional nano-structures. Atomic force microscope (AFM) measurements have shown that the step height and terrace width of GaAs layers increase monotonically with increasing substrate temperature. By using the step arrays formed on GaAs(331)A surfaces as the templates, we have fabricated highly ordered InGaAs nanowires. The improved homogeneity and the increased density of the InGaAs nanowires are attributed to the modulated strain field caused by vertical multi-stacking, as well as the effect of corrugated surface of the template. Photoluminescence (PL) tests confirmed remarkable polarization anisotropy.

Self-organized InAs quantum wires on GaAs (331)A substrates

Self-organized InAs quantum wires (QWRs) were fabricated on the step edges of the GaAs (331)A surface by molecular beam epitaxy. The lateral size of InAs QWRs was saturated by the terrace width (i.e., 90 nm) while the size along the step lines increased with the increasing thicknesses of the InAs layers, up to 1100 nm. The height of InAs QWRs varied from 7.9 nm to 13 nm. The evolution of the morphology of InAs QWRs was attributed to the diffusion anisotropy of In adatoms.

Corrugated surfaces formed on GaAs (331)a substrates: The template for laterally ordered InGaAs nanowires

Morphology evolution of high-index (331)A surfaces during molecular beam epitaxy (MBE) growth have been investigated in order to uncover their unique physic properties and fabricate spatially ordered low dimensional nanostructures. Atomic Force Microscope (AFM) measurements have shown that the step height and terrace width of GaAs layers increase monotonically with increasing substrate temperature in conventional MBE. However, this situation is reversed in atomic hydrogen-assisted MBE, indicating that step bunching is partly suppressed. We attribute this to the reduced surface migration length of Ga adatoms with atomic hydrogen. By using the step arrays formed on GaAs (331)A surfaces as the templates, we fabricated laterally ordered InGaAs self-aligned nanowires.

Surface morphology evolution of strained InAs/GaAs(331)a films

Surface morphology evolution of strained InAs/GaAs(331)A films was systematically investigated in this paper. Under As-rich conditions, InAs elongated islands aligned along [1 (1) over bar0] are formed at a substrate temperature of 510 degrees C. We explained it as a result of the anisotropic diffusion of adatoms. Under In-rich conditions, striking change has occurred with respect to the surface morphology of the InAs layers. Instead of anisotropic InAs elongated islands, unique island-pit pairs randomly distributed on the whole surface were observed. Using cooperative nucleation mechanisms proposed by Jesson et al. [Phys. Rev. Lett. 77, 1330 (1996)], we interpret the resulting surface morphology evolution.

Morphology Evolution of (331)A High-Index Surfaces During Atomic Hydrogen Assisted Molecular Beam Epitaxy (MBE)

Step like morphology of (331)A high-index surfaces during atomic hydrogen assisted molecular beam epitaxy (MBE) growth has been investigated. Atomic Force Microscope (AFM) measurements show that in conventional MBE, the step heights and terrace widths of GaAs layers increase monotonically with increasing substrate temperatures. The terrace widths and step densities increase with increasing the GaAs layer thickness and then saturates. And, in atomic hydrogen assisted MBE, the terrace width reduces and density increases when depositing the same amount of GaAs. It attributes this to the reduced surface migration length of Ga adatoms with atomic hydrogen. Laterally ordered InAs self-aligned nano-wires were grown on GaAs (331)A surfaces and its optical polarization properties were revealed by photoluminescence measurements.

GaAs(331)A面InAs自组织纳米结构形貌演化

采用分子束外延方法在CaAs(331)A高指数衬底上制备自对齐InAs纳米线(QWRs)或者三维(3D)岛状结构.InAs纳米线(QWRs)选择性生长在CaAs层的台阶边缘.通过原子力显微镜(AfM)仔细研究了InAs纳米微结构的表面形貌,发现不同的生长条件,包括:衬底温度、生长速率、和InAs层厚度等,对InAa表面形貌有很大的影响.如,低温更容易导致线状纳米微结构的形成,而高温更利于3D岛状结构形成.表面形貌的转变归结于表面能同应变能之间的竞争.