Perceptions of corporate social responsibility: A case study of the perceived contents and outcomes

CSR has been subject of broad debate and research over the decades and has gained attention recently. The purpose of this thesis is to find out how companies perceive CSR. In addition this thesis is researching what is CSR in Finnish companies, how do companies measure CSR, what are the effects of CSR and how companies perceive those effects and what actors and factors support CSR. This research is a case study where altogether nine informants from seven companies were interviewed. This research is qualitative case study implemented with theme interviews. The analysis method is content analysis. Several interesting issues emerged from the empirical findings. CSR is playing pivotal role in companies values, vision and mission. CSR was perceived differently in companies but also mutual points emerged. The role of stakeholders is essential in CSR. In addition the communication with stakeholders was seen very important. Companies perceived that they can gain many benefits when acting responsibly for instance in issues related to cost reduction, reputation and personnel. However measuring these effects from CSR point of view was seen challenging. Other CSR related challenges are for example change and lack of resources. When considering empirical findings from a theoretical point of view, three interesting issues emerged. CSR reports play an important role in measuring and developing of CSR. However, this is not the case with all companies and some of them argued that reporting has too much attention nowadays when talking about CSR. The benefits of CSR are mostly related to responsive CSR. However maybe in a long-term follow-up strategic CSR related competitive advantage benefits could be more easily noticed. Many different issues supported CSR. Some issues are driven by outside of companies like NGO`s and media and some inside like the motivation of personnel and management. Vastuullista liiketoimintaa on tutkittu vuosien saatossa laajalti ja se on saanut viime vuosina erityisen paljon huomiota. Tämän pro gradu –tutkielman tavoitteena on selvittää, miten yritykset kokevat vastuullisen liiketoiminnan. Tämän lisäksi tutkimuksessa selvitetään, mitä vastuullinen liiketoiminta suomalaisissa yrityksissä tarkoittaa, miten yritykset mittaavat omaa vastuullisuuttaan, mitkä ovat vastuullisuuden vaikutukset, miten yritykset kokevat vastuullisuuden vaikutukset ja mitkä tekijät tukevat vastuullisen liiketoiminnan syntyä. Tutkimus toteutettiin haastattelemalla yhdeksää suomalaisen yrityksen yritysvastuusta vastaavaa tai sen kanssa työskentelevää henkilöä seitsemästä eri organisaatiosta loppuvuodesta 2014 ja alkuvuodesta 2015. Tutkimus on laadullinen, teemahaastatteluilla toteutettu haastattelututkimus. Aineisto on analysoitu teemoittain. Tutkimusaineiston perusteella vaikuttaa siltä, että vastuullinen liiketoiminta on tärkeässä roolissa yritysten arvoissa, visiossa ja missiossa. Yritysvastuu koettiin yrityksissä erilailla, mutta myös yhtäläisyyksiä on nähtävissä. Sidosryhmien rooli on erittäin tärkeä yritysvastuusta puhuttaessa ja myös kommunikointi sidosryhmien kanssa nousi tärkeäksi aiheeksi. Yritykset kokivat saavuttavansa monia hyötyjä vastuullisesta toiminnasta kuten kustannussäästöihin, maineeseen ja työntekijöihin liittyvissä asioissa. Näiden hyötyjen mittaaminen yritysvastuun näkökulmasta koettiin kuitenkin haasteelliseksi. Muita vastuullisuuteen liittyviä haasteita olivat esimerkiksi siihen liittyvä muutos sekä niukat resurssit. Tutkimuksen johtopäätöksistä nousi esille kolme merkittävää seikkaa. Vastuullisuusraportoinnin koettiin olevan hyödyllinen yritysvastuun mittaamisessa ja kehittämisessä. Kaikki yritykset eivät kuitenkaan olleet tätä mieltä ja osa koki raportoinnin saavan liian paljon huomiota nykypäivänä. Yritysten kokemat hyödyt vastuullisuuteen liittyen syntyivät pääosin reaktiivisesta vastuullisuudesta. Tässä kohdin on kuitenkin huomionarvoista mainita, että strategisen vastuullisuuden hyödyt olisivat saattaneet nousta paremmin esille pidemmän aikavälin tutkimuksessa. Yritysvastuun syntyä tukevia tekijöitä löytyi monia. Osa tekijöistä oli yrityksen ulkopuolisia kuten kansalaisjärjestöt ja media ja jotkut taas kumpusivat yrityksen sisältä esimerkiksi työntekijöiden ja johdon motivaatio.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

Choosing the service support model after a merger: Case Are Ltd.

The meaning of information technology (IT) and information systems have increased during the last few years. This is mainly because business is nowadays seen more and more as a service business and IT is one of the key elements to support those business services. Since the meaning of IT services has increased also the meaning of IT service support should be a factor paid more attention to. Especially after a merger and acquisition (M&A) it is more important than ever to consider service support. The purpose of this study is to discover the best practices for choosing a suitable service support model. The research question is How to choose a service support organization model for the ERP service desk function after a merger? A qualitative method is selected as a research method. This thesis includes two parts: a literature review and a case study. Theoretical part compiles an integrated model of previous research on the topic. It consists a collection of academic articles, publications and reports. The empirical part focuses on the issues in the case organization. That part tries to answer the question: what would be the most suitable service support model for the case organization? The empirical part is conducted by interviewing the employees of the case organization. This study finds that even though there are many ways of selecting a service support model it is difficult to define an unambiguous guidelines. However, there are few main objectives that should be taken into account regardless the case. Especially by using ITIL processes it is possible to implement a comprehensive service support and raise overall awareness of the existing service support models. The main functions that need to be taken into account are nature, industry and size of the organization. Also the business strategy, goals and resources need to be considered. These are the same factors that are noticed in the case study as well. The suggestions for the case organization are presented based on the interviews and the literature review.

SME internationalisation from an emerging market to a developed market : a case study from Ghana

This study focuses on understanding the internationalisation of small and medium-sized enterprises (SMEs) from an emerging market to a developed market. In particular, it examines the internationalisation process of a firm in the clothing and textile manufacturing industry in Ghana. Theoretically, the study is limited to the network internationalisation approach (e.g. Johanson & Mattsson, 1988; Johanson & Vahlne, 2009) and the industrial network approach (Håkansson & Snehota, 1995). Methodologically, a qualitative abductive case study approach is employed. The research process relies on a longitudinal method involving primary and secondary data and critical event analysis. Primary data has been collected from relevant informants at two different times in the internationalisation process. The research findings highlight the significance of both domestic and foreign business relationships in the internationalisation of an SME from an emerging African market to a developed country market. They show the greater importance of exogenous critical events than has been found in the research regarding firms in developed countries. Institutional actors were essential in the network and as sources of exogenous critical events. In addition, the successful SME should possess unique resources in the form of an entrepreneurial spirit, sufficient knowledge of internationalisation, and specific product knowledge. Theoretically, the present study contributes to business network research through providing an understanding of the process of developing network relationships and their impact in an African context. By focusing on SMEs, a contribution has been made in relation to the advancement of SME research. This research reveals empirical insight into SME internationalisation in a setting where an SME is internationalising to a developed country market from a newly emerging African market. Methodologically, the study provides an example of longitudinal research based on abductive methodology. The results provide implications for firms, managers, and policy-makers within the industry, especially on how to manage and use network relationships to promote SME internationalisation from newly emerging markets.

Improve the production capacity: A case study of Eurofins Viljavuuspalvelu Oy

In any manufacturing system, there are many factors that are affecting and limiting the capacity of the entire system. This thesis addressed a study on how to improve the production capacity in a Finnish company (Viljavuuspalvelu Oy) through different methods like bottleneck analysis, Overall Equipment Effectiveness (OEE), and Just in Time production. Four analyzing methods have been studied in order to detect the bottleneck machine in Viljavuuspalvelu Oy. The results shows that the bottleneck machine in the industrial area that constraint the production is the grinding machine while the bottleneck machine in the laboratory section is the photometry machine. In addition, the Overall Equipment Effectiveness (OEE) of the entire system of the studied case was calculated and it has been found that the OEE of the Viljavuuspalvelu Oy is 35.75%. Moreover, two methods on how to increase the OEE were studied and it was shown that either the total output of the company should be 1254 samples/shift in order to have an OEE around 85% which is considered as a world class or the Ideal run rate should be 1.45 pieces/minute. In addition, some realistic methods are applied based on the finding in this thesis to increase the OEE factor in the company and in one realistic method the % OEE has increase to 62.59%. Finally, an explanation on how to implement the Just in Time production in Viljavuuspalvelu Oy has been studied.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.

Path Analysis of Online Users Using Clickstream Da-ta: Case Online Magazine Website

This paper explores behavioral patterns of web users on an online magazine web-site. The goal of the study is to first find and visualize user paths within the data generated during collection, and to identify some generic behavioral typologies of user behavior. To form a theoretical foundation for processing data and identifying behavioral ar-chetypes, the study relies on established consumer behavior literature to propose typologies of behavior. For data processing, the study utilizes methodologies of ap-plied cluster analysis and sequential path analysis. Utilizing a dataset of click stream data generated from the real-life clicks of 250 ran-domly selected website visitors over a period of six weeks. Based on the data collect-ed, an exploratory method is followed in order to find and visualize generally occur-ring paths of users on the website. Six distinct behavioral typologies were recog-nized, with the dominant user consuming mainly blog content, as opposed to editori-al content. Most importantly, it was observed that approximately 80% of clicks were of the blog content category, meaning that the majority of web traffic occurring in the site takes place in content other than the desired editorial content pages. The out-come of the study is a set of managerial recommendations for each identified behavioral archetype.

Reorganising purchasing organisation – Case Metsä Wood

The purpose of this study is to investigate how a global company should organise its purchasing operations. The theoretical framework of this study consists of organisation structures, management and coordination, purchasing organisational design, capabilities and outsourcing. The research is a qualitative case study and the used method was theme interview. Four global large scale companies were interviewed for this research in order to gain knowledge about how other companies have organised their purchasing functions and to gather their best practices. Interview results and theoretical framework were compared in order to test the theoretical framework and to create a detailed framework about how to organise purchasing operations in a global company. As a result a 14 point model about effective purchasing operation organisation for a global company was created. This model includes all the key determinants which should be considered when organising the purchasing operations. The results show that the organising decision should be always in line with company and purchasing strategies. Strategic purchasing operations should be centralized and operative tasks decentralized.

Finding Methods for Recognizing and Classifying Spare Part Criticality – Case Full Deposit Stripping Machines

The aim of this Master’s thesis is to find a method for classifying spare part criticality in the case company. Several approaches exist for criticality classification of spare parts. The practical problem in this thesis is the lack of a generic analysis method for classifying spare parts of proprietary equipment of the case company. In order to find a classification method, a literature review of various analysis methods is required. The requirements of the case company also have to be recognized. This is achieved by consulting professionals in the company. The literature review states that the analytic hierarchy process (AHP) combined with decision tree models is a common method for classifying spare parts in academic literature. Most of the literature discusses spare part criticality in stock holding perspective. This is relevant perspective also for a customer orientated original equipment manufacturer (OEM), as the case company. A decision tree model is developed for classifying spare parts. The decision tree classifies spare parts into five criticality classes according to five criteria. The criteria are: safety risk, availability risk, functional criticality, predictability of failure and probability of failure. The criticality classes describe the level of criticality from non-critical to highly critical. The method is verified for classifying spare parts of a full deposit stripping machine. The classification can be utilized as a generic model for recognizing critical spare parts of other similar equipment, according to which spare part recommendations can be created. Purchase price of an item and equipment criticality were found to have no effect on spare part criticality in this context. Decision tree is recognized as the most suitable method for classifying spare part criticality in the company.

Increased profitability and efficiency by improving the Meetings & Events Category S2P-process – Case Company

The purpose of this research was to examine the most optimal way to arrange meetings and events management and source to pay –process in a global company. The research is a qualitative multi-method case study and is a commission from a global company. The theoretical framework of this research structures around two approaches. First approach focus on a purchasing strategy and management that shows the current role of procure-ment and introduce different ways to organize purchasing functions. Second approach focus on purchasing process management and improvement methods. Annual spend analyze, external and internal interviews and internal survey were done to gain compre-hensive knowledge about the current state of operations and possible solutions. Gathered data were then combined to theoretical framework in order to create optimal solution for the case company. Based on the research a source to pay –process and global policy for meeting and event category was created. The solution includes all relevant matters that are needed in order to secure efficient and profitable operations. The results show that optimal way to arrange meetings and events structures around standardized source to pay –processes, central-ized procurement, preferred supplier and clearly defined roles and responsibilities be-tween different stakeholders.

Digital Content Marketing in the Business-to-Business Context. A Case Study on Marketing Communications Agencies.

Marketing has changed because of digitalization. Marketing is moving towards digital channels and more companies are transitioning from “pushing” advertising messages to “pull” marketing, that attracts audience with the content that interests and benefits the audience. This kind of marketing is called content marketing or “inbound” marketing. This study focuses on how marketing communications agencies utilize digital content marketing and what are the best practices with the selected digital content marketing channels. In this study, those channels include blogs, Facebook, Twitter, and LinkedIn. The qualitative research method was utilized in order to examine the phenomenon of digital content marketing in-depth. The chosen data collecting method was semi-structured interviewing. A total of seven marketing communications agencies, who currently utilize digital content marketing, were selected as case companies and interviewed. All the case companies are from the marketing communications industry because that industry can be assumed to be well adapted to digital content marketing techniques. There is a research gap about digital content marketing in the B2B context, which increases the novelty value of this research. The study examines what is digital content marketing, why B2B companies use digital content marketing, and how should digital content marketing be conducted through blogs and social media. The informants perceived digital marketing to be a fundamental part of their all marketing. They conduct digital content marketing for the following reasons: to increase sales, to improve their brand image and to demonstrate their own skills. Concrete results of digital content marketing for the case companies include sales leads, new clients, better brand image, and that recruiting is easier. The most important success factors with blogs and social media are the following: 1) Audience-centric thinking. All content planning should start from figuring out which themes interests the target audience. Social media channel choices should be based on where the target audience can be reached. 2) Companies should not talk only about themselves. Instead, content is made about themes that interests the target audience. On social media channels, only a fragment of all shared content is about the company. Rather, most of the shared content is industry-specific content that helps the potential client.

Valtion ohjauksen kehittyminen - case pelastustoimi

Tämän työn tavoitteena on vastata pääkysymykseen, miten sisäministeriö ohjaa pelastustoimen toimialaa ja miten sitä voidaan uudessa järjestelmässä kehittää. Työ on kuvaileva analyysi siitä, miten pelastustoimen toimialaohjausta on toteutettu 1970-luvun puolivälistä nykypäivään. Tavoitteena on kuvata valtion ohjauskeinovalikoimaa ja sitä, miten ohjauskeinoja on pelastustoimessa sovellettu. Keskeinen tavoite on ymmärtää, miten ohjausta on tehty aiemmin ja miten ohjausta tulee tehdä jatkossa, jotta toimialan kehittämistä voidaan tehdä nykyistä paremmin. Työn keskeinen tulos on se, että normi- ja resurssiohjauksen tulee olla keskenään tasapainossa, jota tuetaan tilanteeseen sopivalla informaatio-ohjauksella. Informaatio-ohjauksen tulee perustua vuorovaikutteiseen verkostomaiseen toimintamalliin, jossa toimialan linjauksille haetaan yhteinen sitoutuminen. Tämä edellyttää sisäministeriön ohjausmenetelmien muuttamista perinteisestä normiohjauksesta verkostojen informaatio-ohjaukseksi.

Deviations of Governance In IT Multi-Sourcing: A Case Study

IT outsourcing (ITO) refers to the shift of IT/IS activities from internal to external of an organization. In prior research, the governance of ITO is recognized with persistent strategic importance for practice, because it is tightly related to ITO success. Under the rapid transformation of global market, the evolving practice of ITO requires updated knowledge on effective governance. However, research on ITO governance is still under developed due to the lack of integrated theoretical frameworks and the variety of empirical settings besides dyadic client-vendor relationships. Especially, as multi-sourcing has become an increasingly common practice in ITO, its new governance challenges must be attended by both ITO researchers and practitioners. To address this research gap, this study aims to understand multi-sourcing governance with an integrated theoretical framework incorporating both governance structure and governance mechanisms. The focus is on the emerging deviations among formal, perceived and practiced governance. With an interpretive perspective, a single case study is conducted with mixed methods of Social Network Analysis (SNA) and qualitative inquiries. The empirical setting embraces one client firm and its two IT suppliers for IT infrastructure services. The empirical material is analyzed at three levels: within one supplier firm, between the client and one supplier, and among all three firms. Empirical evidences, at all levels, illustrate various deviations in governance mechanisms, with which emerging governance structures are shaped. This dissertation contributes to the understanding of ITO governance in three domains: the governance of ITO in general, the governance of multi-sourcing in particular, and research methodology. For ITO governance in general, this study has identified two research strands of governance structure and governance mechanisms, and integrated both concepts under a unified framework. The composition of four research papers contributes to multi-sourcing research by illustrating the benefits of zooming in and out across the multilateral relationships with different aspects and scopes. Methodologically, the viability and benefit of mixed-method is illustrated and confirmed for both researchers and practitioners.

Internal communication during an organizational change: An ethnographic case study

This study discusses the importance of internal communication during organizational change of a case study company X. The purpose of this study is to find out how to use internal communication effectively during organizational change. This study is an ethnographic cade study where a unique case of an organizational change was chosen as the research object. The theoretical background of this study consists of literature relating to the concepts of communication, organizational communication, organizational change, change management and communication of change. The empirical research conducted for this study is based on an ethnographic research method where data was collected through participant observation, informal interviews and field records in the form of a research diary. The research data was collected between September and December 2015. During this period the researcher was working within the case study organization while observing the internal communication during the organizational change process. Triangulation was used to analyze the research data in order to build a united and theoretical picture of the topic. The study finds that without clear internal communication strategy the effectiveness of communication is ought to be poor, which may lead to resistance of change, lack of trust and lower level of overall job satisfaction. Moreover the study findings highlight the importance of managerial presence during an organizational change process and consistency in using formal and informal communication and utilizing multiple communication channels. Based on the findings of this research the study suggests that during an organizational change process a clear internal communication strategy should be carefully planned and executed. The goals of internal communication should be clearly stated and communicated to the company’s employees. The findings of this study enhance importance of managers promoting sense of belonging, developing awareness of the overall change process and contributing to the manager employee relationships and trust. In addition this study points out the key factors that should be included in the internal change communication strategy which are how to ensure that the communications, both vertical and horizontal, are constant. Future research is however necessary in order to gain a more comprehensive view of the research and wider perspective of the case study. Nevertheless, this study deepens the understanding of how to use internal communication effectively during organizational change.