The engineering link project: Learning about engineering by becoming an engineer

There has been a greater emphasis over the past few years of encouraging high school students to take up engineering as a career. This is due to a greater need for engineers in society, particularly in areas that are suffering a skills shortage. Both the engineering profession and universities across Australia have moved to address this shortage, with a proliferation of engineering outreach activities and programs the result. The Engineering Link Group (TELG) began the Engineering Link Project (ELP) over a decade ago with a focus on helping motivated high school students make an informed choice about engineering as a career. It also aimed at encouraging more high school students to study maths and science at high school. From the start the ELP was designed so that the students became engineers, rather than just hear from or watch engineers. Real working engineers pose problems to groups of students for them solve over the course of a day. In this way, students experience what it is like to be an engineer. It has been found that the project does help high school students make more informed career choices about engineering. The project also gave the students real life and practical reasons for studying sciences and mathematics at high school. © 2005, Australasian Association for Engineering Education

An action research study with low proficiency learners in Japan to promote the learning of vocabulary through collocations.

This action research (AR) study explores an alternative approach to vocabulary instruction for low-proficiency university students: a change from targeting individual words from the general service list (West, 1953) to targeting frequent verb + noun collocations. A review of the literature indicated a focus on collocations instead of individual words could potentially address the students’ productive challenges with targeted vocabulary. Over the course of four reflective cycles, this thesis addresses three main aspects of collocation instruction. First, it examines if the students believe studying collocations is more useful than studying individual lexical items. Second, the thesis investigates whether a focus on collocations will lead to improvements in spoken fluency. This is tested through a comparison of a pre-intervention spoken assessment task with the findings from the same task completed 15 weeks later, after the intervention. Third, the thesis explores different procedures for the instructing of collocations under the classroom constraints of a university teaching context. In the first of the four reflective cycles, data is collected which indicates that the students believe a focus on collocations is superior to only teaching individual lexical items, that in the students’ opinion their productive abilities with the targeted structures has improved, and that delexicalized verb collocations are problematic for low-proficiency students. Reflective cycle two produces evidence indicating that productive tasks are superior to receptive tasks for fluency development. In reflective cycle three, productively challenging classroom tasks are investigated further and the findings indicate that tasks with higher productive demands result in greater improvements in spoken fluency. The fourth reflective cycle uses a different type of collocation list: frequent adjective + noun collocations. Despite this change, the findings remain consistent in that certain types of collocations are problematic for low-proficiency language learners and that the evidence shows productive tasks are necessary to improve the students’ spoken ability.

Teaching and learning German language and culture in higher education in Britain:problems, challenges and didactical implications. A case study

The aim of this thesis is to explore key aspects and problems of the institutionalised teaching and learning of German language and culture in the context of German Studies in British Higher Education (HE). This investigation focuses on teaching and learning experiences in one department of German Studies in the UK, which is the micro-context of the present study, in order to provide an in-depth insight into real-life problems, strengths and weaknesses as they occur in the practice of teaching and learning German. Following Lamb (2004) and Holliday (1994), the present study acts on the assumption that each micro-context does not exist in vacuo but is always embedded in a wider socio-political and education environment, namely the macro-context, which largely determines how and what is taught. The macro-analysis of the present study surveys the socio-political developments that have recently affected the sector of modern languages and specifically the discipline of German Studies in the UK. It demonstrates the impact they have had on teaching and learning German at the undergraduate level in Britain. This context is interesting inasmuch as the situation in Britain is to a large extent a paradigmatic example of the developments in German Studies in English-speaking countries. Subsequently, the present study explores learning experiences of a group of thirty-five first year students. It focuses on their previous experiences in learning German, exposure to the target language, motivation, learning strategies and difficulties encountered, when learning German at the tertiary level. Then, on the basis of interviews with five lecturers of German, teaching experience in the context under study is explored, problems and successful teaching strategies discussed.

Review of doctoral research in second-language teaching and learning in Australia (2003–2006)

This article reviews recent doctoral research in Australian universities in the area of language teaching and learning. Doctoral work in three main areas of research concentration is described: language teaching, language learning, and writing. The authors whose studies are reviewed are graduates of the Australian National University, Griffith University, Macquarie University, the University of Technology, Sydney, the University of Sydney, the University of New South Wales, the University of Melbourne, Monash University, La Trobe University, Deakin University and Murdoch University.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.

Proof in the pedagogic pudding? The challenges of promoting evidence-based teaching practice in a research-focused institution

Drawing upon the findings of a mixed methodological study, this paper critically analyses the cultural, pedagogical, and organisational issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice tasked with facilitating a new teaching-focused policy in a previously research-led institution. The aim of this policy is to assure that, across the institution, teaching is given the same priority and kudos as research. Focusing specifically staff perceptions of the impact of the new policy on various aspects of academic life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management.

Student input in the development of a marking scheme for improved engineering logbooks

Engineers logbooks are an important part of the CDIO process, as a prequel to the logooks they will be expected to keep when in industry. Previously however, students logbooks were insufficient and students did not appear to appreciate the importance of the logbooks or how they would be assessed. In an attempt to improve the students understanding and quality of logbooks, a group of ~100 1st year CDIO students were asked to collaboratively develop a marking matrix with the tutors. The anticipated outcome was that students would have more ownership in, and a deeper understanding of, the logbook and what is expected from the student during assessment. A revised marking matrix was developed in class and a short questionnaire was implemented on delivery of the adapted matrix to gauge the students response to the process. Marks from the logbooks were collected twice during teaching period one and two and compared to marks from previous years. This poster will deliver the methodology and outcomes for this venture.

Perceptions of learning and teaching quality in Higher Education:developing a culture of co-creation of value

Perceptions about the quality of learning and teaching in Higher Education has for many years focused upon the application of market based principles. This includes the notion of students as “customers” of the Higher Education Institutions (HEI) service. We argue that the application of the customer analogy is unhelpful however, as students this approach is likely to affect student expectations about the service and their judgements about its quality. The purpose of this paper is to propose a study consisting of a series of interventions to develop a culture of value co-creation at a UK based HEI. By introducing CCV principles, it is hoped to steer students away from seeing themselves as “customers”, and passive recipients of in the learning and teaching process, to one where they take responsibility for their own learning experience, to be explored and acted upon in partnership with their lecturers and other stakeholders.

Forging futures? Engineering in the primary school curriculum

Starting with the research question, "How can the Primary School Curriculum be developed so as to spark Children's Engineering Imaginations from an early age?" this paper sets out to critically analyse the issues around embedding Engineering in the Primary School Curriculum from the age of 5 years. Findings from an exploratory research project suggest that in order to promote the concept of Engineering Education to potential university students (and in doing so begin to address issues around recruitment / retention within Engineering) there is a real need to excite and engage children with the subject from a young age. Indeed, it may be argued that within today's digital society, the need to encourage children to engage with Engineering is vital to the future sustainable development of our society. Whilst UK Government policy documents highlight the value of embedding Engineering into the school curriculum there is little or no evidence to suggest that Engineering has been successfully embedded into the elementary level school curriculum. Building on the emergent findings of the first stage of a longitudinal study, this paper concludes by arguing that Engineering could be embedded into the curriculum through innovative pedagogical approaches which contextualise project-based learning experiences within more traditional subjects including science, history, geography, literacy and numeracy.

Electronic Education in the Field of Electrical Engineering Disciplines. Combined Didactic Interactive Program System

At present in the educational process of electrical engineering disciplines electronic learning program, providing control over reproductive educational-cognitive activity (the decision of standard problems) and universal modeling program systems, for instance Electronics Workbench, giving a chance of organizing productive, in particular research activity are basically used. However universal modeling program systems can not provide auto control over educational-cognitive activity because of the absence of the feedback with students. The combined didactic interactive program system, providing the closed directed auto control over both the reproductive and productive heuristic educational-cognitive activity of the student is offered.

Collaborative Learning and Authoring in the Frame of e-Projects

It is presented a research on the application of a collaborative learning and authoring during all delivery phases of e-learning programmes or e-courses offered by educational institutions. The possibilities for modelling of an e-project as a specific management process based on planned, dynamically changing or accidentally arising sequences of learning activities, is discussed. New approaches for project-based and collaborative learning and authoring are presented. Special types of test questions are introduced which allow test generation and authoring based on learners’ answers accumulated in the frame of given e-course. Experiments are carried out in an e-learning environment, named BEST.