Electrical signature of modern and ancient tectonic processes in the crust of the Atlas mountains of Morocco.

The Atlas Mountains in Morocco are considered as type examples of intracontinental chains, with high topography that contrasts with moderate crustal shortening and thickening. Whereas recent geological studies and geodynamic modeling have suggested the existence of dynamic topography to explain this apparent contradiction, there is a lack of modern geophysical data at the crustal scale to corroborate this hypothesis. Newly-acquired magnetotelluric data image the electrical resistivity distribution of the crust from the Middle Atlas to the Anti-Atlas, crossing the tabular Moulouya Plain and the High Atlas. All the units show different and unique electrical signatures throughout the crust reflecting the tectonic history of development of each one. In the upper crust electrical resistivity values may be associated to sediment sequences in the Moulouya and Anti-Atlas and to crustal scale fault systems in the High Atlas developed during the Cenozoic times. In the lower crust the low resistivity anomaly found below the Mouluya plain, together with other geophysical (low velocity anomaly, lack of earthquakes and minimum Bouguer anomaly) and geochemical (Neogene-Quaternary intraplate alkaline volcanic fields) evidence, infer the existence of a small degree of partial melt at the base of the lower crust. The low resistivity anomaly found below the Anti-Atlas may be associated with a relict subduction of Precambrian oceanic sediments, or to precipitated minerals during the release of fluids from the mantle during the accretion of the Anti-Atlas to the West African Supercontinent during the Panafrican orogeny ca. 685 Ma).

Developing Supply Management Processes in a Global Process Automation Organization

Tämän työn tarkoituksena on tutkia prosessien uudelleensuunnittelua ja erityisesti hankintaprosessien uudistamista kansainvälisessä prosessiautomaatioyrityksessä. Työn aihealuetta tutkitaan sekä henkilöstön, uuden teknologian että prosessien kehittämisen näkökulmasta. Prosessien kehittämisessä työkaluna on käytetty tunnettua laatutyökalua, Six Sigmaa. Työn päätavoitteena on luoda uudet toimintamallit kehitettäville prosesseille. Kirjallisuuden lisäksi työ perustuu kirjoittajan kokemuksiin ja havaintoihin projektitiimin jäsenenä. Prosessien kehittämistä tarkastellaan myös muutoksenhallinnan näkökulmasta. Tämä on alue, jota ei saisi koskaan jättää huomiotta kehityshankkeissa. Kehitettäessä liiketoimintaprosesseja muutoksenhallinta on menestyksen kannalta ensisijaisen tärkeää. Muutoksenhallintaa tutkitaan työssä sekä organisaation että yksilön kannalta. Tässä työssä esitellään lisäksi maailmanlaajuisesti tunnettu ja käytetty laatutyökalu, Six Sigma. Six Sigmaa on käytetty myös työn lopussa tarkasteltavassa case-osuudessa. Case-osuudessa prosesseja tutkitaan aina nykytilasta uusiin toimintamalleihin saakka. Prosesseja ja niiden suorituskykyä analysoidaan yhtäjaksoisesti kehitysprojektien edetessä.

Customer expectation study in product development process and its role in strategy formulation

Tämä työ on tehty kansainväliselle metsäteollisuusyritykselle. Työn lähtökohtana oli tarve tutkia yrityksen mahdollisuuksia laajentaa toimintaansa uudelle markkinasegmentille, eläinruokapakkausmarkkinoille. Johtuen maailmanlaajuisesta eläinruoankulutuksen kasvusta, eläinruokapakkaukset ovat yritykselle mielenkiintoinen uusi markkina-alue. Onnistunut markkinoilletulo vaatii asiakastarpeiden ja -odotusten huomioimista tuotekehitys- ja markkinastrategian muodostamisessa. Tämän työn tavoitteena oli selvittää asiakkaiden odotuksia eläinruokapakkauksille, sekä mallintaa alalla vallitsevia ostoprosesseja. Asiakastarvetutkimus suunniteltiin perustuen kirjallisuuteen ja alustaviin markkina- ja asiakasanalyyseihin. Alustavat analyysit ovat tarpeellisia lähtötilanteen ja trendien selvittämiseksi. Itse tutkimus toteutettiin semi-konstruktoituna teemahaastatteluna. Haastateltavat edustivat USA:n ja Euroopan johtavia eläinruokavalmistajia ja pakkausten jatkojalostajia. Työn tuloksena saatiin yksityiskohtaista tietoa asiakkaiden odotuksista eläinruokapakkauksille, paperin ominaisuuksille ja paperitoimittajille. Lisäksi mallinnettiin ostoprosesseja paperitoimittajien, pakkausten jalostajien ja eläinruokavalmistajien välillä. Tulosten perusteella on analysoitu yrityksen mahdollisuuksia menestyä uudella markkinasegmentillä. Lisäksi työssä annettiin ehdotuksia tuotekehitys- ja markkinastrategian muodostamiseen.

Development of Customer Satisfaction Models for Electronics Engineering Company

Diplomityön tarkoituksena oli luoda ja kehittää kaksi asiakastyytyväisyysmallia asiakastyytyväisyyden mittaamisen aloittamiseksi ja toteuttamiseksi kohdeyrityksessä. Työ pohjautuu nykyisten tyytyväisyysprosessien analysointiin sekä työn teoriaosaan, joka käsittelee yksityiskohtaisesti niitä asioita, joita asiakastyytyväisyyden mittaamisessa ja prosessissa tulisi huomioida. Työssä tehdyn mallien tarkoituksen on auttaa kohdeyritystä hyödyntämään asiakastyytyväisyysmittauksen tuloksia paremmin liiketoiminnassa, sekä asiakkaiden keskuudessa. Työn yhtenä tavoitteena oli myös sopivan mittaustyökalun löytäminen ja suositteleminen kohdeyritykselle.Teorian ja analysoinnin pohjalta luotiin molemmat asiakastyytyväisyysmallit vastamaan kohdeyksiköiden tarpeita. Kun ulkoiset seikat, kuten mittaustavat, mittausinstrumentit, kyselylomakkeet ja vastaajaryhmät oli määritelty, keskityttiin tulosten analysointiin ja hyödyntämiseen, mikä korostui asiakassuuntautuneessa organisaatiossa. Työssä pohdittiin myös yhtenäisen asiakastyytyväisyysprosessin merkitystä ja etuja kohdeyrityksessä.

Electronic Data Interchange in Logistics Processes

Tämän diplomityön tarkoituksena oli tehdä selvitys EDI:in liittyvistä vaikutuksista, tarpeista ja eduista sekä valmistella Oracle Applications- toiminnanohjausjärjestelmän EDI Gateway- modulin ottamista tuotantokäyttöön. Tietoa tarvekartoitukseen saatiin keskustelujen avulla. Uusia kaupallisista lähtökohdista johdettuja, yritysten väliseen kaupankäyntiin ja internet-teknologian hyödyntämiseen kehitettyjä aloitteita käsiteltiin EDI-näkökulmasta tulevaisuutta varten. Ajankohtaisinta tietoa tätä diplomityötä varten löydettiin myös internetistä. Tämän jälkeen oli mahdollista toteuttaa sopivan laaja mutta rajattu EDI pilottiprojekti EDI-konseptin luomista varten. EDI:n vaikutuksiin ostossa keskityttiin tässä diplomityössä enemmän ja EDI:ä päätettiin soveltaa aluksi ostotilauksissa. EDI:n hyötyjä on vaikea mitata numeerisesti. Suurta määrää rahaa tai tuoteyksiköitä on käsiteltävä EDI-partnerin kanssa riittävän usein. EDI:n käyttöönottovaiheessa pääongelmat ovat sovelluksiin liittyviä tietotekniikkaongelmia. Selvityksistä ja EDI-projektista saatu tieto on mahdollista hyödyntää jatkokehityksessä. Lisätoimenpiteitä tarvitaan kokonaan toimivan järjestelmän luomiseksi.

Supplier process development

Tämän diplomityön tarkoituksena on parantaa Timberjackin ja Timberjackin toimittajien välistä yhteistyötä ja saattaa Timberjackin toimintatavat toimittajien tietoisuuteen. Aiheen laajuuden vuoksi yksittäisten aihepiirien syvällinen tutkiminen jäi vähäiseksi. Monet globaalit yhtiöt ovat nykyisin ottaneet selkeäksi strategiakseen toimintojensa ulkoistamisen ja tällöin yhtiölle itselleen jää ainoastaan lopputuotteiden kokoonpanon työvaiheet. Tämä tarkoittaa, että ulkoisilta toimittajilta ostetaan entistä enemmän komponentteja ja tuotekokonaisuuksia. Toisaalta taas harvalla toimittajalla on vielä tarvittavaa tieto-taitoa tai resursseja vastata päämiehen lisääntyviin tarpeisiin. Tämä on syy miksi suuret maailmanluokan yhtiöt panostavat nykyisin huomattavia voimavaroja toimittajaketjun kehittämiseen. Diplomityön ensimmäisessä osiossa paneudutaan teoria-asioihin, jotka tulee olla tiedossa kehitettäessä yhteistyötä toimittajien kanssa. Toisessa osassa tutkitaan Timberjackin toimintatapoja, tuotantomallia ja nykyisiä toimittajia. Nämä tiedot ovat välttämättömiä, kun luodaan kokonaiskuvaa toimittajaprosessista ja kun kehitetään uusia työkaluja helpottamaan toimittajien ja Timberjackin välistä yhteistyötä. Työn tuloksena Timberjackilla on nyt toimittajakäsikirja, joka sisältää tietoja, jotka toimittajien tulee huomioida toimiessaan Timberjackin kanssa ja myös ohjeita siitä, kuinka toimittajat voivat kehittää omia prosessejaan.

Maintenance process development for remote administration of network servers

Maintenance is a part of system development and it is possible to develop operation models for accomplishing maintenance tasks. These models can be applied to individual maintenance tasks, maintenance projects and version management. Beneficial operation models makes maintenance more effective and they assist in managing various changes. The purpose of this thesis was to develop a maintenance process which can be used to remote administer network servers. This consisted of defining those operation models and technical specifications which enable to set up, manage changes, maintain and monitor resources of information systems that are located in several different sites. At first in this thesis the needs of the process were determined and requirements were defined based on those needs. The meaning of processes in maintenance of information systems, maintenance workflows and challenges were studied. Then current practical problems and disadvantages of maintenance work were analyzed in order to focus the development to proper issues. Because available operation models did not cover all the recent needs, new maintenance process which fulfilled the requirements was developed.

Development of the ability to inhibit a prepotent response: influence of working memory and processing speed.

This study aimed to examine developmental trends in response inhibition during childhood and to control for possible developmental influence of other basic cognitive processes (such as working memory and processing speed). In addition, we explored the relationships between response inhibition, working memory, and processing speed, as they are thought to be integral to cognitive control. Therefore, we assessed these three cognitive abilities in 159 children aged from 5 to 12. Results showed an improvement in response inhibition ability from 5 to 10 years of age. This improvement remained significant after controlling for the influence of working memory and processing speed. Furthermore, the developmental relationships showed an early differentiation between response inhibition, working memory, and processing speed. Thus, these processes were independent and need to be treated as such in further studies.

Developing Launching Processes — A Case Study

New product launches are becoming more and more important to companies around the globe. Being first on the market is a good place to be, and it will mostly likely bring the best profits. Gaining that desired position requires a lot of work where cooperation inside as well as outside of the company need to be in line. This thesis discusses launching processes in a pharmaceutical firm. The topic is looked at from supply chain management's point of view where purchasing department's role is emphasized. Additionally, launching strategies related to launches are investigated and the idea of internal alignment is introduced. Moreover, the topic is examined in project and process management perspective; how with the tools of project and process management the launching processes could be improved. The main findings reveal that there are many improvement points in the current launching process. Problems in the areas of information exchange, leadership and internal alignment were discovered yet trust and confidence for the better future compound the interviewees. This study presents what are the most important factors for a successful product launch and how the current processes could be streamlined.

Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Facilitating coordination improvement efforts in cross-functional process development programs

Business process improvement is a common approach in increasing the effectiveness of an organization. It can be seen as an effort to increase coordination between units. Process improvement has proved to be challenging, and most management consultation firms facilitate organizations in this kind of initiatives. Cross-functional improvement is one of the main areas for internal consultants as well. However, the needs, challenges and means of cross-functional help have been rarely discussed in the literature. The objective of this thesis is on one hand to present a conceptual and descriptive framework to help understand the challenges of facilitating coordination improvement efforts in cross-functional improvement programs, and on the other hand to develop and test feasible solutions for some facilitation situations. The research questions are: 1. Why and in what kind of situations do organizations need help in developing coordination in cross-functional processes? 2. How can a facilitator help organizations in improving coordination to develop cross-functional processes? The study consists of two parts. The first part is an overview of the dissertation, and the second part comprises six research publications. The theoretical background for the study are the differentiation causing challenges in cross-functional settings, the coordination needed to improve processes, change management principles, methods and tools, and consultation practises. Three of the publications introduce tools for helping in developing prerequisites, planning responsibilities and supporting learning during the cross-functional program. The three other papers present frameworks to help understand and analyse the improvement situation. The main methodological approaches used in this study are design science research, action research and case research. The research data has been collected from ten cases representing different kinds of organizations, processes and developing situations. The data has been collected mainly by observation, semi-structured interviews and questionnaires. The research contributes to the rare literature combining coordination theories and process improvement practises. It also provides additional understanding of a holistic point of view in process improvement situations. The most important contribution is the addition to the theories of facilitating change in process improvement situations. From the managerial point of view, this study gives advice to managers and consultants in planning and executing cross-functional programs. The main factors increasing the need for facilitation are the challenges for differentiation, challenges of organizational change in general, and the novelty of initiatives and improvement practices concerning process development. Organizations need help in creating the prerequisites to change, in planning initiatives, easing conflict management and collaboration between groups, as well as supporting the learning of cross-functional improvement. The main challenges of facilitation are combining the different roles as a consultant, maintaining the ownership for the improvement project with the client, and supporting learning in the client organization.

Development of a systematic computer vision-based method to analyse and compare images of false identity documents for forensic intelligence purposes-Part I: acquisition, calibration and validation issues

Following their detection and seizure by police and border guard authorities, false identity and travel documents are usually scanned, producing digital images. This research investigates the potential of these images to classify false identity documents, highlight links between documents produced by a same modus operandi or same source, and thus support forensic intelligence efforts. Inspired by previous research work about digital images of Ecstasy tablets, a systematic and complete method has been developed to acquire, collect, process and compare images of false identity documents. This first part of the article highlights the critical steps of the method and the development of a prototype that processes regions of interest extracted from images. Acquisition conditions have been fine-tuned in order to optimise reproducibility and comparability of images. Different filters and comparison metrics have been evaluated and the performance of the method has been assessed using two calibration and validation sets of documents, made up of 101 Italian driving licenses and 96 Portuguese passports seized in Switzerland, among which some were known to come from common sources. Results indicate that the use of Hue and Edge filters or their combination to extract profiles from images, and then the comparison of profiles with a Canberra distance-based metric provides the most accurate classification of documents. The method appears also to be quick, efficient and inexpensive. It can be easily operated from remote locations and shared amongst different organisations, which makes it very convenient for future operational applications. The method could serve as a first fast triage method that may help target more resource-intensive profiling methods (based on a visual, physical or chemical examination of documents for instance). Its contribution to forensic intelligence and its application to several sets of false identity documents seized by police and border guards will be developed in a forthcoming article (part II).

The new final Clinical Skills examination in human medicine in Switzerland: Essential steps of exam development, implementation and evaluation, and central insights from the perspective of the national Working Group.

OBJECTIVE: Since 2011, the new national final examination in human medicine has been implemented in Switzerland, with a structured clinical-practical part in the OSCE format. From the perspective of the national Working Group, the current article describes the essential steps in the development, implementation and evaluation of the Federal Licensing Examination Clinical Skills (FLE CS) as well as the applied quality assurance measures. Finally, central insights gained from the last years are presented. METHODS: Based on the principles of action research, the FLE CS is in a constant state of further development. On the foundation of systematically documented experiences from previous years, in the Working Group, unresolved questions are discussed and resulting solution approaches are substantiated (planning), implemented in the examination (implementation) and subsequently evaluated (reflection). The presented results are the product of this iterative procedure. RESULTS: The FLE CS is created by experts from all faculties and subject areas in a multistage process. The examination is administered in German and French on a decentralised basis and consists of twelve interdisciplinary stations per candidate. As important quality assurance measures, the national Review Board (content validation) and the meetings of the standardised patient trainers (standardisation) have proven worthwhile. The statistical analyses show good measurement reliability and support the construct validity of the examination. Among the central insights of the past years, it has been established that the consistent implementation of the principles of action research contributes to the successful further development of the examination. CONCLUSION: The centrally coordinated, collaborative-iterative process, incorporating experts from all faculties, makes a fundamental contribution to the quality of the FLE CS. The processes and insights presented here can be useful for others planning a similar undertaking.

Pre-existing astrocytes form functional perisynaptic processes on neurons generated in the adult hippocampus.

The adult dentate gyrus produces new neurons that morphologically and functionally integrate into the hippocampal network. In the adult brain, most excitatory synapses are ensheathed by astrocytic perisynaptic processes that regulate synaptic structure and function. However, these processes are formed during embryonic or early postnatal development and it is unknown whether astrocytes can also ensheathe synapses of neurons born during adulthood and, if so, whether they play a role in their synaptic transmission. Here, we used a combination of serial-section immuno-electron microscopy, confocal microscopy, and electrophysiology to examine the formation of perisynaptic processes on adult-born neurons. We found that the afferent and efferent synapses of newborn neurons are ensheathed by astrocytic processes, irrespective of the age of the neurons or the size of their synapses. The quantification of gliogenesis and the distribution of astrocytic processes on synapses formed by adult-born neurons suggest that the majority of these processes are recruited from pre-existing astrocytes. Furthermore, the inhibition of astrocytic glutamate re-uptake significantly reduced postsynaptic currents and increased paired-pulse facilitation in adult-born neurons, suggesting that perisynaptic processes modulate synaptic transmission on these cells. Finally, some processes were found intercalated between newly formed dendritic spines and potential presynaptic partners, suggesting that they may also play a structural role in the connectivity of new spines. Together, these results indicate that pre-existing astrocytes remodel their processes to ensheathe synapses of adult-born neurons and participate to the functional and structural integration of these cells into the hippocampal network.

Secondary growth of the Arabidopsis hypocotyl-vascular development in dimensions.

The secondary thickening of plant organs in extant dicotyledons is a massive growth process that constitutes the major carbon sink in perennial, woody plants. Yet, our understanding of its molecular genetic control has been mostly obtained by its analysis in an herbaceous annual model, Arabidopsis. Recent years have seen increased interest in this somewhat under-researched topic, and various (non-)cell autonomous factors that guide the extent and vascular patterning of secondary growth have been identified. Concomitantly, a more detailed understanding of vascular differentiation processes has been obtained through analyses of primary growth, mostly in the root meristem. A future challenge will be the integration of these patterning and differentiation modules together with cambial activity into the 4-dimensional frame of secondary thickening.