Construção das capacidades organizacionais de tecnologia da informação no contexto dos sistemas institucionais integrados de gestão da UFRN

The IT capability is a organizational ability to perform activities of this role more effectively and an important mechanism in creating value. Its building process (stages of creation and development) occurs through management initiatives for improvement in the performance of their activities, using human resources and IT assets complementary responsible for the evolution of their organizational routines. This research deals with the IT capabilities related to SIG (integrated institutional management systems), built and deployed in UFRN (Universidade Federal do Rio Grande do Norte) to realization and control of administrative, academic and human resources activities. Since 2009, through cooperative agreements with federal and educational institutions of direct administration, UFRN has supported the implementation of these systems, currently involving more than 30 institutions. The present study aims to understand how IT capabilities, relevant in the design, implementation and dissemination of SIG, were built over time. This is a single case study of qualitative and longitudinal nature, performed by capturing, coding and analysis from secondary data and from semi-structured interviews conducted primarily with members of Superintenência de Informática, organizational unit responsible for SIG systems in UFRN. As a result, the technical, of internal relationship and external cooperation capabilities were identified as relevant in the successful trajectory of SIG systems, which have evolved in different ways. The technical capacity, initiated in 2004, toured the stages of creation and development until it reached the stage of stability in 2013, due to technological limits. Regarding the internal relationship capability, begun in 2006, it toured the stages of creation and development, having extended its scope of activities in 2009, being in development since then. Unlike the standard life cycle observed in the literature, the external cooperation capability was initiated by an intensity of initiatives and developments in the routines in 2009, which were decreasing to cease in 2013 in order to stabilize the technological infrastructure already created for cooperative institutions. It was still identified the start of cooperation in 2009 as an important event selection, responsible for changing or creating trajectories of evolution in all three capacities. The most frequent improvements initiatives were of organizational nature and the internal planning activity has been transformed over the routines of the three capabilities. Important resources and complementary assets have been identified as important for the realization of initiatives, such as human resources technical knowledge to the technical capabilities and external cooperation, and business knowledge, for all of them, as well as IT assets: the iproject application for control of development processes, and the document repository wiki. All these resources and complementary assets grew along the capacities, demonstrating its strategic value to SINFO/UFRN

Impactos da adoção de sistemas de informação no judiciário: pesquisa com usuários do sistema processual virtual em um juizado especial federal

The Information Technology (IT) is increasing his applicability to business, both private and public companies. It is necessary the adequate use of the new technologies and get cooperation and technology acceptance of the system. People tend to resist to the changes, contributing so that the technology is rejected or even it is not recognized as promoting of the changes. This study is relevant and aim to evaluate the impacts of new technologies, considering their users as fundamental factors in the change process. The survey analyzed the advantages and the barriers of the system use in three federal special judicial of Rio Grande do Norte, with data collected in May of 2007, through the application of questionnaires to thirty eight users of the virtual system CRETA. The users' perception was evaluated, under the optics of five variables: efficiency, image, agility, ease of use and quality. Starting from the obtained results, it was evidenced that the implementation of the system felt accordingly the expected and it reached the objectives intended that were: the velocity and efficiency in the path of the lawsuits, larger productivity, resulting in a better quality of the final work introduced to the citizen and proportionate an improvement in the organizational image of the judiciary power

Fatores críticos de sucesso para sistemas de informação de apoio ao gerenciamento de projetos: o caso SEBRAE/RN

Universidade Federal do Rio Grande do Norte

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Desenvolvimento de sistemas embarcados para redes de sensores e atuadores sem fio aplicadas em unidades de elevação de petróleo do tipo Plunger-Lift

The Wireless Sensor Networks (WSN) methods applied to the lifting of oil present as an area with growing demand technical and scientific in view of the optimizations that can be carried forward with existing processes. This dissertation has as main objective to present the development of embedded systems dedicated to a wireless sensor network based on IEEE 802.15.4, which applies the ZigBee protocol, between sensors, actuators and the PLC (Programmable Logic Controller), aiming to solve the present problems in the deployment and maintenance of the physical communication of current elevation oil units based on the method Plunger-Lift. Embedded systems developed for this application will be responsible for acquiring information from sensors and control actuators of the devices present at the well, and also, using the Modbus protocol to make this network becomes transparent to the PLC responsible for controlling the production and delivery information for supervisory SISAL

Aplicação de sistemas microemulsionados ácidos em acidificação de poços

Stimulation operations have with main objective restore or improve the productivity or injectivity rate in wells. Acidizing is one of the most important operations of well stimulation, consist in inject acid solutions in the formation under fracture formation pressure. Acidizing have like main purpose remove near wellbore damage, caused by drilling or workover operations, can be use in sandstones and in carbonate formations. A critical step in acidizing operation is the control of acid-formation reaction. The high kinetic rate of this reaction, promotes the consumed of the acid in region near well, causing that the acid treatment not achive the desired distance. In this way, the damage zone can not be bypassed. The main objective of this work was obtain stable systems resistant to the different conditions found in field application, evaluate the kinetic of calcite dissolution in microemulsion systems and simulate the injection of this systems by performing experiments in plugs. The systems were obtained from two non ionic surfactants, Unitol L90 and Renex 110, with sec-butanol and n-butanol like cosurfactants. The oily component of the microemlsion was xilene and kerosene. The acqueous component was a solution of HCl 15-26,1%. The results shown that the microemulsion systems obtained were stable to temperature until 100ºC, high calcium concentrations, salinity until 35000 ppm and HCl concentrations until 25%. The time for calcite dissolution in microemulsion media was 14 times slower than in aqueous HCl 15%. The simulation in plugs showed that microemulsion systems promote a distributed flux and promoted longer channels. The permeability enhancement was between 177 - 890%. The results showed that the microemulsion systems obtained have potential to be applied in matrix acidizing

Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Períodos de interferência das plantas daninhas na cultura da soja nos sistemas de semeadura direta e convencional

A presente pesquisa objetivou estudar os efeitos dos períodos de controle e de convivência de uma comunidade infestante sobre as características produtivas da soja nos sistemas de semeadura direta (SSD), com o cultivar CD 201, e convencional (SSC), com a MSOY-6101. No SSD, a comunidade infestante foi composta principalmente por Alternanthera tenella, Cenchrus echinatus e Bidens pilosa, com densidade máxima de 377 plantas m-2, acumulando 365,7 g m-2 de matéria seca, e, no SSC, por A. tenella, Senna obtusifolia e Panicum maximum, com densidade máxima de 161 plantas m-2, acumulando 406,7 g m-2. Tolerando cinco por cento de perda na produtividade da cultura, constatou-se que os períodos críticos de prevenção da interferência foram dos 33 aos 66 DAE para o cultivar CD 201 no SSD e dos 34 aos 76 DAE para o cultivar M-SOY-6101 no SSC. A interferência das plantas daninhas durante todo o ciclo da cultura reduziu, em média, 46% (SSD) e 32% (SSC) a produtividade de grãos da soja. Não houve efeito das plantas daninhas na estatura das plantas, na altura de inserção da primeira vagem e no número de vagens por planta.

Épocas de consórcio de alho com cenoura em três sistemas de manejo de plantas daninhas, em Caçador-SC

O presente trabalho teve por objetivo avaliar os efeitos do consórcio alho e cenoura em quatro épocas de semeadura de cenoura e em três manejos de plantas daninhas, visando determinar os benefícios do consórcio em relação ao controle destas plantas, à produtividade, à rentabilidade e à sua qualidade comercial. Testaram-se quatro épocas de semeadura da cenoura (0, 15, 30 e 45 dias após o plantio do alho), combinadas a três manejos de plantas daninhas (com herbicida, sem controle e com capinas freqüentes). Utilizou-se o delineamento de blocos casualizados dispostos em parcelas subdivididas, com a época de semeadura da cenoura sendo parcela e o sistema de manejo, a sub-parcela, em quatro repetições. O oxadiazon a 750 g ha-1 não foi tóxico às plantas de alho nem às de cenoura. A rentabilidade do consórcio alho e cenoura foi vantajosa em relação ao monocultivo de alho, principalmente dentro do manejo com capinas freqüentes.

Do controle de constitucionalidade dos atos jurisdicionais transitados em julgado

The following study aims to verify in which hypothesis res judicata, when it comes of an unconstitutional decision, shall not prevail over Constitution. It displayed the characteristics of formal and material constitutional systems. It debated the concepts of existence, validity and efficacy of juridical rules and acts. It dissertated about the idea of Constitution s superiority and about the birth of the judicial review of constitutionality. It focused some contemporary models of this judicial review and its historical evolution in Brazil, showing its effects towards the current Constitution. It sustained that the decision given by Supremo Tribunal Federal during abstract control of rules must bind even legislative bodies, preventing them to produce the same rules previously declared unconstitutional. It held up that all parts of the decision of Supremo Tribunal Federal oblige, even the juridical arguments employed, in both diffused and concentrated reviews. It showed that, despite these models of review live together in Brazil, our constitutional system preferred the concentrated one, considering one only court over the other constitutional organs. It discussed about res judicata with the purpose of clarifying its juridical nature, its objective and subjective limits and its regulation in collective demands. It explained that the material res judicata is an effect of a decision which cannot be reviewed, which makes the law s will free of discussion, binding the contendants and avoiding that other courts, judging future demands about the same object, may decide differently. It showed how the regulation of res judicata in collective demands, in respect oh their subjective limits, is useful to demonstrate that it is not the material law who must adapt itself to res judicata as traditionally thought, but res judicata, as a warranty of juridical certainty and security, who must be shaped from the debated rule. It presented to view the main doctrinal conceptions about res judicata s review in the hypothesis of unconstitutional judgement. It concluded that the decisions forged by unconstitutional rules or interpretations reputed not compatible to the Constitution by Supremo Tribunal Federal, in spite of it can make res judicata, may be reviewed beyond the term to file a recissory claim, since while the debated law is still valid, no matter if its decision was before or after the res judicata. At the end, it asserted that, when it is not legally authorized, the judicial review of res judicata is not admissible, after the term to file a recissory claim, under the argument that there was no direct violation to the constitutional principle or rule

A missão política do Supremo Tribunal Federal: análise de sua importância como corte constitucional para o controle do poder no Brasil

The following study proposes an analysis of the politic process which the brazilian constitutional justice faces, emphasizing the Supremo Tribunal Federal . For that purpose, we start by examining the intimate relationship between Politics and Law, in view of the most recent social systems theories, so that the political system is distinguished by the exclusiveness of using the physical force, intending to make coletive tying decisions, and the juridical system as a congruent generalization of the expectations towards the rules and principles, brought together under an interdependence by which both gather legitimacy and effectiveness. In this manner we can notice the political effects of the constitutional interpretation conducted by Judges as well as by other juridical professionals, because these ones decrease the overload of expectations which are pointed to the Judicature. Constitutional interpretation is democratized since the participative democracy arises and stablishes a permanent state of awareness around the exercise of power and favours the preservation of the pluralism (counter-majoritary principle) where we can find the origin of the democratic nature of constitutional courts, once, in most cases, their members are not elected by the people. After that, we analyse the historical posture of the Supremo Tribunal Federal as a constitutional court in Brazil, so we can realize the attempts to make it vulnerable to the appeals of governability and economical aims, agains which this court somehow has resisted, stressing its particularities. At the end, it s concluded that even the so-called acts of government, whose judiciary control is mostly repelled, are subjected to a constitutional analysis, last frontier to be explored by the Supremo Tribunal Federal in its role of exposing our republican Constitution

Influência da matéria orgânica dissolvida alóctone e autóctone sobre o balanço de carbono em sistemas aquáticos: um experimento em mesocosmos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Efeito prolongado de sistemas de preparo do solo com e sem cultivo de soqueira de cana crua em algumas propriedades físicas do solo

Este trabalho foi conduzido em Latossolo Vermelho distrófico típico, sob cultivo de cana crua, com o objetivo de avaliar o efeito prolongado de sistemas de preparo do solo, com e sem cultivo da soqueira, e épocas de amostragem sobre algumas propriedades físicas do solo. O delineamento experimental foi o de blocos ao acaso, em esquema de parcelas subsubdivididas, sendo os tratamentos principais quatro sistemas de preparo do solo: (i) controle da soqueira com duas gradagens, subsolagem e mais uma gradagem de nivelamento; (ii) controle da soqueira com herbicida e uma subsolagem; (iii) controle da soqueira com herbicida; (iv) controle da soqueira com herbicida, aração com arado de aivecas e uma gradagem de nivelamento. Os tratamentos secundários foram: com cultivo e sem cultivo da soqueira. Os tratamentos ternários foram as épocas de avaliação: dois dias antes e após a quarta colheita da cultura. A porosidade total, macroporosidade, microporosidade e densidade do solo foram avaliadas, além do perfilhamento e da produtividade da cultura. Após quatro sucessivas colheitas de cana crua, houve redução da macroporosidade com aumento da microporosidade nas camadas abaixo de 10 cm e aumento da densidade do solo entre 20 e 50 cm. A densidade do solo não foi alterada de modo consistente em função de todos os tratamentos testados. O cultivo da soqueira favoreceu o aumento da macroporosidade com decréscimo na microporosidade, e o efeito inverso foi observado após a colheita. Os sistemas de preparo do solo e de cultivo da soqueira não afetaram o perfilhamento e a produtividade da cultura.

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Controle preditivo não linear baseado no modelo de Hammerstein com prova de estabilidade

The Predictive Controller has been receiving plenty attention in the last decades, because the need to understand, to analyze, to predict and to control real systems has been quickly growing with the technological and industrial progress. The objective of this thesis is to present a contribution for the development and implementation of Nonlinear Predictive Controllers based on Hammerstein model, as well as to its make properties evaluation. In this case, in the Nonlinear Predictive Controller development the time-step linearization method is used and a compensation term is introduced in order to improve the controller performance. The main motivation of this thesis is the study and stability guarantee for the Nonlinear Predictive Controller based on Hammerstein model. In this case, was used the concepts of sections and Popov Theorem. Simulation results with literature models shows that the proposed approaches are able to control with good performance and to guarantee the systems stability