Optimization and evaluation in space conditions of multi-GHz optical modulators

Among the different optical modulator technologies available such as polymer, III-V semiconductors, Silicon, the well-known Lithium Niobate (LN) offers the best trade-off in terms of performances, ease of use, and power handling capability [1-9]. The LN technology is still widely deployed within the current high data rate fibre optic communications networks. This technology is also the most mature and guarantees the reliability which is required for space applications [9].In or der to fulfil the target specifications of opto-microwave payloads, an optimization of the design of a Mach-Zehnder (MZ) modulator working at the 1500nm telecom wavelength was performed in the frame of the ESA-ARTES "Multi GigaHertz Optical Modulator" (MGOM) project in order to reach ultra-low optical insertion loss and low effective driving voltage in the Ka band. The selected modulator configuration was the X-cut crystal orientation, associated to high stability Titanium in-diffusion process for the optical waveguide. Starting from an initial modulator configuration exhibiting 9 V drive voltage @ 30 GHz, a complete redesign of the coplanar microwave electrodes was carried out in order to reach a 6 V drive voltage @ 30GHz version. This redesign was associated to an optimization of the interaction between the optical waveguide and the electrodes. Following the optimisation steps, an evaluation program was applied on a lot of 8 identical modulators. A full characterisation was carried out to compare performances, showing small variations between the initial and final functional characteristics. In parallel, two similar modulators were submitted to both gamma (10-100 krad) and proton irradiation (10.109 p/cm²) with minor performance degradation.

Multi-component assessment of chronic obstructive pulmonary disease : an evaluation of the ADO and DOSE indices and the global obstructive lung disease categories in international primary care data sets

Funding The International Primary Care Respiratory Group (IPCRG) provided funding for this research project as an UNLOCK group study for which the funding was obtained through an unrestricted grant by Novartis AG, Basel, Switzerland. The latter funders had no role in study design, data collection and analysis, decision to publish or preparation of the manuscript. Database access for the OPCRD was provided by the Respiratory Effectiveness Group (REG) and Research in Real Life; the OPCRD statistical analysis was funded by REG. The Bocholtz Study was funded by PICASSO for COPD, an initiative of Boehringer Ingelheim, Pfizer and the Caphri Research Institute, Maastricht University, The Netherlands.

Evaluation of the multi-element capabilities of collision/reaction cell inductively coupled plasma - mass spectrometry in wine analysis

This work explores the multi-element capabilities of inductively coupled plasma - mass spectrometry with collision/reaction cell technology (CCT-ICP-MS) for the simultaneous determination of both spectrally interfered and non-interfered nuclides in wine samples using a single set of experimental conditions. The influence of the cell gas type (i.e. He, He+H2 and He+NH3), cell gas flow rate and sample pre-treatment (i.e. water dilution or acid digestion) on the background-equivalent concentration (BEC) of several nuclides covering the mass range from 7 to 238 u has been studied. Results obtained in this work show that, operating the collision/reaction cell with a compromise cell gas flow rate (i.e. 4 mL min−1) improves BEC values for interfered nuclides without a significant effect on the BECs for non-interfered nuclides, with the exception of the light elements Li and Be. Among the different cell gas mixtures tested, the use of He or He+H2 is preferred over He+NH3 because NH3 generates new spectral interferences. No significant influence of the sample pre-treatment methodology (i.e. dilution or digestion) on the multi-element capabilities of CCT-ICP-MS in the context of simultaneous analysis of interfered and non-interfered nuclides was observed. Nonetheless, sample dilution should be kept at minimum to ensure that light nuclides (e.g. Li and Be) could be quantified in wine. Finally, a direct 5-fold aqueous dilution is recommended for the simultaneous trace and ultra-trace determination of spectrally interfered and non-interfered elements in wine by means of CCT-ICP-MS. The use of the CCT is mandatory for interference-free ultra-trace determination of Ti and Cr. Only Be could not be determined when using the CCT due to a deteriorated limit of detection when compared to conventional ICP-MS.

Cooperative research and development agreement with Frandon Enterprises : development and evaluation of multi-media test kits for lead and other trace metals.

Mode of access: Internet.

Evaluation of design analysis procedures and acceptance criteria for roadside hardware. Volume III - evaluating pre-report 230 crash tests. Final report.

Federal Highway Administration, Safety Design Division, McLean, Va.

Evaluation of design analysis procedures and acceptance criteria for roadside hardware. Volume IV - the importance of the occupant risk criteria. Final report.

Federal Highway Administration, Safety Design Division, McLean, Va.

Evaluation of design analysis procedures and acceptance criteria for roadside hardware. Volume V - hazards of the redirected car. Final report.

Federal Highway Administration, Safety Design Division, McLean, Va.

Development and evaluation of Hybrid III multi-point thoracic deflection measurement sensors. Final report.

Mode of access: Internet.

Development and use of a computer simulation model for the evaluation of design and control alternatives for intersections of minor roads with multi-lane rural highways: field studies and model validation. Interim report.

Federal Highway Administration, Washington, D.C.

Development and use of a computer simulation model for the evaluation of design and control alternatives for intersections of minor roads with multi-lane rural highways: model application. Interim report.

Federal Highway Administration, Washington, D.C.

Development and use of a computer simulation model for the evaluation of design and control alternatives for intersections of minor roads with multi-lane rural highways: selection of the simulation model. Interim report.

Federal Highway Administration, Washington, D.C.

Learning and generalization of structural descriptions : evaluation criteria and comparative review of selected methods /

"February 1980."

Crash injury evaluation; helmet design criteria

"Task 9R95-20-001-01. Contract DA 44-177-TC-802."

Investigation of standards, performance characteristics, and evaluation criteria for thermoplastic piping in residential plumbing systems /

"Sponsored by Office of Policy Development and Research, Department of Housing and Urban Development."

Evaluation of test methods and use criteria for geotechnical fabrics in highway applications /

Mode of access: Internet.