Sistema de monitorização de defeitos na rede de energia elétrica de média tensão

Nesta dissertação de Mestrado em Engenharia Eletrotécnica – Telecomunicações desenvolveu-se um sistema de monitorização de defeitos de uma rede de energia elétrica de média tensão, para melhorar a qualidade de serviço do fornecimento de energia elétrica. O sistema deteta e indica a localização da respetiva falha, que impede o funcionamento de uma parte da rede, também interliga todos os sensores instalados na rede a um ponto central que recebe toda a informação proveniente dos sensores, e ajuda na tomada de decisão. Neste trabalho de dissertação fez-se o estudo e descrição das redes de energia elétrica, realçando a topologia, o modo de operação e parâmetros de qualidade. Assinalou-se também os principais defeitos que podem ocorrer na rede de média tensão. Apresentou-se, ao nível comercial, soluções para mitigar o problema alvo de estudo. Explorou-se, num ambiente de simulação, soluções de deteção dos defeitos da rede, tendo sido desenvolvidos três sistemas distintos: sistema A, sistema B e sistema C. Sistema A que monitoriza o valor nominal da corrente elétrica em cada troço da rede elétrica, sistema B com a monitorização do valor da corrente elétrica em cada posto de transformação e sistema C que compara as correntes no inicio e final de cada troço da rede elétrica, verificando se há alguma discrepância entre ambas. Após a análise e simulação das soluções descreve-se o procedimento realizado para criar um protótipo de um sistema de monitorização. Começou-se por testar, individualmente, os sensores de corrente, circuito de condicionamento, microcontroladores e sistema Scada, usado para a visualização dos dados. Posteriormente, elaborou-se manuais de utilização de forma a auxiliar o sistema em trabalhos futuros que venham dar continuidade a este trabalho. Para validar a análise teórica e confirmar os resultados da simulação, testou-se experimentalmente o sistema de deteção C. Confirmou-se que o sistema de monitorização de defeitos é capaz de detetar e localizar a avaria presente na rede de energia elétrica.

Sistema sensor em fibra ótica para deteção de gás

O presente trabalho descreve duas técnicas de deteção de gás baseadas em fibra ótica e apresenta dois sistemas sensores testados em ambiente laboratorial, usando técnicas de processamento de sinal usualmente associadas à espetroscopia de absorção. O estudo inicial do estado da arte dos sensores baseados em fibra ótica para a deteção de gases apresenta soluções com elevada seletividade, sensibilidade e resolução que permitem tempos de resposta curtos e esquemas de multiplexagem versáteis. A técnica de espetroscopia de absorção direta (DAS) permite a deteção de gases de forma simples e com alguma eficácia, mas com uma baixa relação-sinal-ruido. A espetroscopia por modulação de comprimento de onda (WMS) é uma técnica muito eficaz e de elevada sensibilidade para a deteção de gases, dado que a deteção é deslocada para frequências afastadas do ruído base, melhorando significativamente a relação-sinal-ruído. Estas técnicas foram escolhidas para a implementação de dois sistemas optoeletrónicos, totalmente controlados pelas respetivas aplicações em LabVIEW para a deteção e monitorização de amónia (NH3), dióxido de carbono (CO2) e metano (CH4). O trabalho é finalizado com a caraterização laboratorial dos sistemas e avaliação do desempenho, permitindo a otimização dos sistemas e técnicas implementados. De referir que o trabalho realizado nas instalações da Unidade de Optoeletrónica e Sistemas Eletrónicos (UOSE) do Instituto de Engenharia de Sistemas e Computadores (INESC), Tecnologia e Ciência (TEC), laboratório associado coordenado pelo INESC Porto, permitiu, excelentes condições de trabalho, essenciais para implementar de forma prática os diversos conceitos estudados, bem como testar e caraterizar todos os sistemas desenvolvidos em ambiente laboratorial. O trabalho desenvolvido enquadra-se no âmbito do projeto europeu ECOAL-MGT (Gestão ecológica de pilhas de resíduos de carvão), que será implementado para monitorização remota de parâmetros fundamentais de uma escombreira de carvão em auto-combustão em S.ºPedro da Cova, Portugal.

Processo de implantação de um sistema integrado de gestão em uma organização pública à luz da teoria da hospitalidade :um estudo de caso

In the present time, public organizations are employing more and more solutions that uses information technology in order to ofer more transparency and better services for all citizens. Integrated Systems are IT which carry in their kernel features of integration and the use of a unique database. These systems bring several benefits and face some obstacles that make their adoption difficult. The conversion to a integrated system may take years and, thus, the study of the adoption of this IT in public sector organizations become very stimulant due to some peculiarities of this sector and the features of this technology. First of all, information about the particular integrated system in study and about its process of conversion are offered. Then, the researcher designs the configuration of the conversion process aim of this study the agents envolved and the moments and the tools used to support the process in order to elaborate the methodology of the conversion process understood as the set of procedures and tools used during all the conversion process. After this, the researcher points out, together with all the members of the conversion team, the negative and positive factors during the project. Finally, these factors were analysed through the Hospitality Theory lens which, in the researcher opinion, was very useful to understand the elements, events and moments that interfered in the project. The results consolidated empirically the Hospitality Theory presumptions, showing yet a limitation of this theory in the case in study

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Modelagem e simulação de um sistema de bombeio mecânico em poços direcionais utilizando parâmetros concentrados

This work aims presenting the development of a model and computer simulation of a sucker rod pumping system. This system take into account the well geometry, the flow through the tubing, the dynamic behavior of the rod string and the use of a induction motor model. The rod string were modeled using concentrated parameters, allowing the use of ordinary differential equations systems to simulate it s behavior

Desenvolvimento e caracterização de um sistema microemulsionado contendo anfotericina b para uso oftalmológico

Universidade Federal do Rio Grande do Norte

Anfotericina b pré-aquecida: um novo sistema terapêutico para infecções fúngicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Utilização de soluções business-to-business (B2B) no segmento downstream da cadeia de suprimentos de uma distribuidora de combustíveis

The pursuit of competitive advantage is lobbying organizations to strategically plan the use of their material, human, technological and financial resources, so that it s possible to add value to the product, even when it is considered a commodity. The scenario for this planning should not be limited to the company in question, but cover an entire supply chain, which is composed of several organizations which have common goals of growth and sustainability of the market. They should form trade links, integrating the chains of individual values, in a perspective of value system. In this supply chain there is a flow of services, payments and information, as products well as. The training of these links can be supported by the adoption of a set of information technology, here called solutions business-to-business (B2B), which will be responsible for the production, storage and distribution of relevant information to business transactions between the companies involved. On this view, this thesis aims to describe the B2B solutions adopted in the downstream segment of the supply chain of a distributor of fuel and the nature of these technologies as well as their impact on the creation of value for business and optimization of the relationship between companies. This is a case study on a national distributor of fuels, from a model of research produced under the influence of theories of integrated logistics system and value of Michael Porter. The analyses came to the conclusion that information technology is perceived as an essential tool to the operation of all activities carried out by the company. Among them, at was also brought the key activities of integrated logistics: administration of applications, inventory management, management transport and customer services, which were highlighted in this study. It was also noticed that even these activities are, in principle, purely operational; they all had in the adoption of strategies for leadership in cost or differentiation, supported by B2B solutions identified, making it more conducive to business and direct customer, the clinic reseller of fuel, to obtain value and benefits of this market segment as competitive

Fator de decisão na adoção de um sistema de micro-cogeração de energia a gás natural :um estudo em Hotéis três estrelas

The natural gas perform a essential paper, not only in primary sectors of energy, but also in others sectors of economy. The use natural gas will have expansion in Brazil, motivated by governmental decision to increase the participation of this fuel in the Brazilian energy matrix from 4% to 12% up until 2010. in order to reach the objective related to increase the consumption of natural gas in the energy matrix and to propose solutions to attend the electric requirements of heart and refrigeration, using natural gas as primary power plant. This thesis has a main objective to analysis the perception of businessmen of hotel sector about the feasability of investment with micro-cogeneration system by natural gas in their hotel in turistic sector, in Natal/RN. It s show a case for the hotels selected analyzing the actual knowledge of businessmen about alternative of new technology in generation of owner energy. There was make a interview using a standard form researching information about this topic. In this interview has shown 4 (four) canaries for businessmen with different configurations of investment in micro-cogeneration. Two of this canaries uses the project finance like option to make fasible this projects. The resulteis showed who businessmen has insecurity to make decision to put in office alone, or with a local company, and perhaps with a national company to perform for a alternative energy system, justifying, the alone feasability and without information by local businessmen. Apart from that, they are receptive for a option to put in office in micro-cogeneration configured in the settings using project finance

Aprendizado por Reforço com Valores deInfluência em Sistemas Multi-Agente

We propose a new paradigm for collective learning in multi-agent systems (MAS) as a solution to the problem in which several agents acting over the same environment must learn how to perform tasks, simultaneously, based on feedbacks given by each one of the other agents. We introduce the proposed paradigm in the form of a reinforcement learning algorithm, nominating it as reinforcement learning with influence values. While learning by rewards, each agent evaluates the relation between the current state and/or action executed at this state (actual believe) together with the reward obtained after all agents that are interacting perform their actions. The reward is a result of the interference of others. The agent considers the opinions of all its colleagues in order to attempt to change the values of its states and/or actions. The idea is that the system, as a whole, must reach an equilibrium, where all agents get satisfied with the obtained results. This means that the values of the state/actions pairs match the reward obtained by each agent. This dynamical way of setting the values for states and/or actions makes this new reinforcement learning paradigm the first to include, naturally, the fact that the presence of other agents in the environment turns it a dynamical model. As a direct result, we implicitly include the internal state, the actions and the rewards obtained by all the other agents in the internal state of each agent. This makes our proposal the first complete solution to the conceptual problem that rises when applying reinforcement learning in multi-agent systems, which is caused by the difference existent between the environment and agent models. With basis on the proposed model, we create the IVQ-learning algorithm that is exhaustive tested in repetitive games with two, three and four agents and in stochastic games that need cooperation and in games that need collaboration. This algorithm shows to be a good option for obtaining solutions that guarantee convergence to the Nash optimum equilibrium in cooperative problems. Experiments performed clear shows that the proposed paradigm is theoretical and experimentally superior to the traditional approaches. Yet, with the creation of this new paradigm the set of reinforcement learning applications in MAS grows up. That is, besides the possibility of applying the algorithm in traditional learning problems in MAS, as for example coordination of tasks in multi-robot systems, it is possible to apply reinforcement learning in problems that are essentially collaborative

Modelagem e controle de um microveículo aéreo: uma aplicação de estabilidade robusta com a técnica backstepping em uma estrutura hexarrotor

In this Thesis, the development of the dynamic model of multirotor unmanned aerial vehicle with vertical takeoff and landing characteristics, considering input nonlinearities and a full state robust backstepping controller are presented. The dynamic model is expressed using the Newton-Euler laws, aiming to obtain a better mathematical representation of the mechanical system for system analysis and control design, not only when it is hovering, but also when it is taking-off, or landing, or flying to perform a task. The input nonlinearities are the deadzone and saturation, where the gravitational effect and the inherent physical constrains of the rotors are related and addressed. The experimental multirotor aerial vehicle is equipped with an inertial measurement unit and a sonar sensor, which appropriately provides measurements of attitude and altitude. A real-time attitude estimation scheme based on the extended Kalman filter using quaternions was developed. Then, for robustness analysis, sensors were modeled as the ideal value with addition of an unknown bias and unknown white noise. The bounded robust attitude/altitude controller were derived based on globally uniformly practically asymptotically stable for real systems, that remains globally uniformly asymptotically stable if and only if their solutions are globally uniformly bounded, dealing with convergence and stability into a ball of the state space with non-null radius, under some assumptions. The Lyapunov analysis technique was used to prove the stability of the closed-loop system, compute bounds on control gains and guaranteeing desired bounds on attitude dynamics tracking errors in the presence of measurement disturbances. The controller laws were tested in numerical simulations and in an experimental hexarotor, developed at the UFRN Robotics Laboratory

Motor de indução trifásico sem mancais com bobinado dividido: otimização do sistema de posicionamento radial

This dissertation dea1s with the active magnetic suspension controI system of an induction bearingIess motor configured with split windings. It analyses a dynamic modeI for the radial magnetic forces actuating on the rotor. From that, it proposes a new approach for the composition of the currents imposed to the machine's stator. It shows the tests accomplished with a prototype, proving the usefulness of the new actuating structure for the radial positioning controI. Finnaly, it points out the importance of adapting this structure to well-known rotational controI techniques, continuing this kind of equipment research, which is carried out at Federal University of Rio Grande do Norte since 2000

Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters

Produção de pepino de plantas enxertadas cultivadas em soluções nutritivas com diferentes teores de potássio

O experimento foi conduzido em estufa tipo arco de 50 m² na Faculdade de Ciências Agronômicas da UNESP em Botucatu. Plantas de pepino (Cucumis sativus L.) não enxertadas e enxertadas em abóbora (Cucurbita sp.) foram cultivadas em sistema hidropônico para estudar o efeito de níveis de potássio (45; 90; 180 e 360 mg.L-1 de K) na altura da planta e produção de número de frutos/m². A condução das plantas foi em vasos de 28 L de capacidade contendo 20% vermiculita + 80% casca de arroz + solução nutritiva fornecida a partir de galões individuais contendo 20 litros de solução. O delineamento experimental foi blocos casualizados, com oito tratamentos (fatorial 4 x 2) e três repetições. Não houve efeito da enxertia e das doses de K sobre a altura da planta, porém, os níveis de potássio independente da enxertia alteraram o início da floração. A enxertia potencializou a produção aumentando em 39% o número de frutos/m² quando fornecido na solução nutritiva 45 mg.L-1 de K e 144% com 360 mg.L-1 de K. O menor teor de potássio, 45 mg.L-1, foi suficiente para atingir alta produção.

Controle dinâmico de robôs móveis com acionamento diferencial

This work addresses the dynamic control problem of two-wheeled differentially driven non-holonomic mobile robot. Strategies for robot positioning control and robot orientating control are presented. Such strategies just require information about the robot con¯guration (x, y and teta), which can be collected by an absolute positioning system. The strategies development is related to a change on the controlled variables for such systems, from x, y and teta to s (denoting the robot linear displacement) and teta, and makes use of the polar coordinates representation for the robot kinematic model. Thus, it is possible to obtain a linear representation for the mobile robot dynamic model and to develop such strategies. It is also presented that such strategies allow the use of linear controllers to solve the control problem. It is shown that there is flexibility to choice the linear controller (P, PI, PID, Model Matching techniques, others) to be implemented. This work presents an introduction to mobile robotics and their characteristics followed by the control strategies development and controllers design. Finally, simulated and experimental results are presented and commented