Institutional Persistence and Change in England's Common Law: 1700-1865

Institutions are widely regarded as important, even ultimate drivers of economic growth and performance. A recent mainstream of institutional economics has concentrated on the effect of persisting, often imprecisely measured institutions and on cataclysmic events as agents of noteworthy institutional change. As a consequence, institutional change without large-scale shocks has received little attention. In this dissertation I apply a complementary, quantitative-descriptive approach that relies on measures of actually enforced institutions to study institutional persistence and change over a long time period that is undisturbed by the typically studied cataclysmic events. By placing institutional change into the center of attention one can recognize different speeds of institutional innovation and the continuous coexistence of institutional persistence and change. Specifically, I combine text mining procedures, network analysis techniques and statistical approaches to study persistence and change in England’s common law over the Industrial Revolution (1700-1865). Based on the doctrine of precedent - a peculiarity of common law systems - I construct and analyze the apparently first citation network that reflects lawmaking in England. Most strikingly, I find large-scale change in the making of English common law around the turn of the 19th century - a period free from the typically studied cataclysmic events. Within a few decades a legal innovation process with low depreciation rates (1 to 2 percent) and strong past-persistence transitioned to a present-focused innovation process with significantly higher depreciation rates (4 to 6 percent) and weak past-persistence. Comparison with U.S. Supreme Court data reveals a similar U.S. transition towards the end of the 19th century. The English and U.S. transitions appear to have unfolded in a very specific manner: a new body of law arose during the transitions and developed in a self-referential manner while the existing body of law lost influence, but remained prominent. Additional findings suggest that Parliament doubled its influence on the making of case law within the first decades after the Glorious Revolution and that England’s legal rules manifested a high degree of long-term persistence. The latter allows for the possibility that the often-noted persistence of institutional outcomes derives from the actual persistence of institutions.

Beyond the Spanish classics - The ephemeral awakening of the history of international law in pre-democratic Spain

Cuadernos para el Diálogo (1963-1978) played a key-role in nurturing the intellectual soil for the Spanish Transition to democracy and it has spawned an extensive amount of literature among historians. This work links for the first time the course of this emblematic monthly journal with the short-lived period of methodological and historiographical innovation of Revista Española de Derecho Internacional under the direction of the international jurist Mariano Aguilar Navarro.

The psychoactive effects of “Light Cannabis”. From Italian law to psychopharmacology

In 2019, the Italian Supreme Court established that hemp, for non-medical use, cannot be commercialized for human use, when the “psychotropic effect” of the product or its “offensiveness” can be demonstrated. The first chapter of this work reports a review of the European and Italian legislation on hemp cultivation, as well as the hemp production chain and commercial activities. The second chapter reports the pharmacological aspects and the psychoactive effects of light cannabis, along with pharmacokinetics of the main Cannabis compounds: Δ9-tetrahydrocannabinol (Δ9-THC), Cannabidiol (CBD) and Cannabinol (CBN). The aim of the experimental study, reported in the third chapter, is to assess Δ9-THC and CBD blood concentrations after smoking “light cannabis”, and its effects on vigilance, cognitive and motor skills. Eighteen young adults consumed three light cannabis cigarettes with a percentage of 0.41% of Δ9-THC and of 12.41% of CBD. Blood samples were collected before the experiment (t0) and after pre-defined time-lapses. Five performance tasks and a subjective scale were employed for measuring cognitive and psychomotor performances the day before the experiment (TT0) and after the third cigarette (TT1). Mean (SD) concentrations (ng/ml) were between 1.0(0.8) in t1 and 0.3(0.3) in t5 for Δ9-THC; and 10.5(10.3) in t1 and 5.7(5.7) in t5 for CBD. No significant differences were observed between TT0 and TT1 for all performed psychomotor performance task. Δ9-THC and CBD concentrations showed a high inter-subject variability, and the average concentrations were lower than those previously reported. Toxicological results showed a decrease of Δ9-THC and CBD after the third light cannabis cigarette, and a Δ9-THC /CBD ratio always < 1 was observed. This value might be useful in discriminating light cannabis versus illegal/medical cannabis consumption. The lack of impairment observed in our participants can be interpreted as a consequence of the very low concentrations in the blood.

The Financial Services Regime in International Economic Law: on the Difficult Relationship between Trade Liberalization and Prudential Measures

The PhD thesis analyses the financial services regime in international economic law from the perspective of the difficult relationship between trade liberalisation and prudential measures. Financial stability plays a fundamental role for the well-being and well-functioning of the global economy, but, it is at the same time a complex sector to regulate and supervise and, especially after the 2007-08 economic crisis, States have tightened up their regulation of financial services, introducing more severe and protectionist prudential measures. However, in an increasingly interconnected global economy, the harmonization of prudential regulation at the international level is an essential step to guarantee integrity, fairness and stability of financial markets and trade. The research analyses the tools at disposition to achieve this aim, the related problematic issues and the perspectives and possible solutions for the future, starting from the World Trade Organization (WTO) legal framework and its General Agreement on Trade in Services (GATS), devoted to discipline trade in services among the WTO Members. Then, the research moves to a second legal instrument, the Free Trade Agreements (FTAs), which has witnessed a remarkable spread in the last decades. Finally, the research addresses the international standards, developed by supranational entities and implemented by an increasing number of States, as they offer rules and guidelines adequate to update the international financial scenario. Nevertheless, the international standards alone cannot be the solution because, first, they are not mandatory, as governments decide voluntarily to apply them and, second, their decision-making process do not respect the requirements of transparency and representative membership. In light of this analysis, the thesis aims at providing an answer to its research question: how to give more certainty to States and economic operators in the planning of the domestic disciplines and business activities in order to provide a sound and stable international financial system.

Internet of healthcare (law): privacy and data protection aspects in an internet of everything

The purpose of this research study is to discuss privacy and data protection-related regulatory and compliance challenges posed by digital transformation in healthcare in the wake of the COVID-19 pandemic. The public health crisis accelerated the development of patient-centred remote/hybrid healthcare delivery models that make increased use of telehealth services and related digital solutions. The large-scale uptake of IoT-enabled medical devices and wellness applications, and the offering of healthcare services via healthcare platforms (online doctor marketplaces) have catalysed these developments. However, the use of new enabling technologies (IoT, AI) and the platformisation of healthcare pose complex challenges to the protection of patient’s privacy and personal data. This happens at a time when the EU is drawing up a new regulatory landscape for the use of data and digital technologies. Against this background, the study presents an interdisciplinary (normative and technology-oriented) critical assessment on how the new regulatory framework may affect privacy and data protection requirements regarding the deployment and use of Internet of Health Things (hardware) devices and interconnected software (AI systems). The study also assesses key privacy and data protection challenges that affect healthcare platforms (online doctor marketplaces) in their offering of video API-enabled teleconsultation services and their (anticipated) integration into the European Health Data Space. The overall conclusion of the study is that regulatory deficiencies may create integrity risks for the protection of privacy and personal data in telehealth due to uncertainties about the proper interplay, legal effects and effectiveness of (existing and proposed) EU legislation. The proliferation of normative measures may increase compliance costs, hinder innovation and ultimately, deprive European patients from state-of-the-art digital health technologies, which is paradoxically, the opposite of what the EU plans to achieve.

Identification Of Corynebacterium Spp. Isolated From Bovine Intramammary Infections By Matrix-assisted Laser Desorption Ionization-time Of Flight Mass Spectrometry.

Corynebacterium species (spp.) are among the most frequently isolated pathogens associated with subclinical mastitis in dairy cows. However, simple, fast, and reliable methods for the identification of species of the genus Corynebacterium are not currently available. This study aimed to evaluate the usefulness of matrix-assisted laser desorption ionization/mass spectrometry (MALDI-TOF MS) for identifying Corynebacterium spp. isolated from the mammary glands of dairy cows. Corynebacterium spp. were isolated from milk samples via microbiological culture (n=180) and were analyzed by MALDI-TOF MS and 16S rRNA gene sequencing. Using MALDI-TOF MS methodology, 161 Corynebacterium spp. isolates (89.4%) were correctly identified at the species level, whereas 12 isolates (6.7%) were identified at the genus level. Most isolates that were identified at the species level with 16 S rRNA gene sequencing were identified as Corynebacterium bovis (n=156; 86.7%) were also identified as C. bovis with MALDI-TOF MS. Five Corynebacterium spp. isolates (2.8%) were not correctly identified at the species level with MALDI-TOF MS and 2 isolates (1.1%) were considered unidentified because despite having MALDI-TOF MS scores >2, only the genus level was correctly identified. Therefore, MALDI-TOF MS could serve as an alternative method for species-level diagnoses of bovine intramammary infections caused by Corynebacterium spp.

A Metabolomic Protocol For Plant Systematics By Matrix-assisted Laser-desorption/ionization Time-of Flight Mass Spectrometry.

Matrix-assisted laser desorption/ionization time-of flight mass spectrometry (MALDI-TOF MS) has been widely used for the identification and classification of microorganisms based on their proteomic fingerprints. However, the use of MALDI-TOF MS in plant research has been very limited. In the present study, a first protocol is proposed for metabolic fingerprinting by MALDI-TOF MS using three different MALDI matrices with subsequent multivariate data analysis by in-house algorithms implemented in the R environment for the taxonomic classification of plants from different genera, families and orders. By merging the data acquired with different matrices, different ionization modes and using careful algorithms and parameter selection, we demonstrate that a close taxonomic classification can be achieved based on plant metabolic fingerprints, with 92% similarity to the taxonomic classifications found in literature. The present work therefore highlights the great potential of applying MALDI-TOF MS for the taxonomic classification of plants and, furthermore, provides a preliminary foundation for future research.

Profile Of Phenolic Compounds Of Brazilian Virgin Olive Oils By Rapid Resolution Liquid Chromatography Coupled To Electrospray Ionisation Time-of-flight Mass Spectrometry (rrlc-esi-tof-ms).

In recent years, agronomical researchers began to cultivate several olive varieties in different regions of Brazil to produce virgin olive oil (VOO). Because there has been no reported data regarding the phenolic profile of the first Brazilian VOO, the aim of this work was to determine phenolic contents of these samples using rapid-resolution liquid chromatography coupled to electrospray ionisation time-of-flight mass spectrometry. 25 VOO samples from Arbequina, Koroneiki, Arbosana, Grappolo, Manzanilla, Coratina, Frantoio and MGS Mariense varieties from three different Brazilian states and two crops were analysed. It was possible to quantify 19 phenolic compounds belonging to different classes. The results indicated that Brazilian VOOs have high total phenolic content because the values were comparable with those from high-quality VOOs produced in other countries. VOOs from Coratina, Arbosana and Grappolo presented the highest total phenolic content. These data will be useful in the development and improvement of Brazilian VOO.

Visual demonstration of the ionic strength effect in the classroom: the Debye-Hückel limiting law

The effects of ionic strength on ions in aqueous solutions are quite relevant, especially for biochemical systems, in which proteins and amino acids are involved. The teaching of this topic and more specifically, the Debye-Hückel limiting law, is central in chemistry undergraduate courses. In this work, we present a description of an experimental procedure based on the color change of aqueous solutions of bromocresol green (BCG), driven by addition of electrolyte. The contribution of charge product (z+|z-|) to the Debye-Hückel limiting law is demonstrated when the effects of NaCl and Na2SO4 on the color of BCG solutions are compared.

Hegemonia e contra-hegemonia na construção de políticas de esporte e lazer : a experiência do Consórcio Brasília = Hegemony and counter-hegemony in the process of sport and leisure policy-making : the experience of the Consortium Brasilia

Universidade Estadual de Campinas . Faculdade de Educação Física

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers’ instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.

Effects of light-curing time on the cytotoxicity of a restorative composite resin on odontoblast-like cells

This in vitro study evaluated the cytotoxicity of an experimental restorative composite resin subjected to different light-curing regimens. METHODS: Forty round-shaped specimens were prepared and randomly assigned to four experimental groups (n=10), as follows: in Group 1, no light-curing; in Groups 2, 3 and 4, the composite resin specimens were light-cured for 20, 40 or 60 s, respectively. In Group 5, filter paper discs soaked in 5 µL PBS were used as negative controls. The resin specimens and paper discs were placed in wells of 24-well plates in which the odontoblast-like cells MDPC-23 (30,000 cells/cm²) were plated and incubated in a humidified incubator with 5% CO2 and 95% air at 37ºC for 72 h. The cytotoxicity was evaluated by the cell metabolism (MTT assay) and cell morphology (SEM). The data were analyzed statistically by Kruskal-Wallis and Mann-Whitney tests (p<0.05). RESULTS: In G1, cell metabolism decreased by 86.2%, indicating a severe cytotoxicity of the non-light-cured composite resin. On the other hand, cell metabolism decreased by only 13.3% and 13.5% in G2 and G3, respectively. No cytotoxic effects were observed in G4 and G5. In G1, only a few round-shaped cells with short processes on their cytoplasmic membrane were observed. In the other experimental groups as well as in control group, a number of spindle-shaped cells with long cytoplasmic processes were found. CONCLUSION: Regardless of the photoactivation time used in the present investigation, the experimental composite resin presented mild to no toxic effects to the odontoblast-like MDPC-23 cells. However, intense cytotoxic effects occurred when no light-curing was performed.

Surface and subsurface erosion of primary enamel by acid beverages over time

This study evaluated the influence of a cola-type soft drink and a soy-based orange juice on the surface and subsurface erosion of primary enamel, as a function of the exposure time. Seventy-five primary incisors were divided for microhardness test (n=45) or scanning electron microscopy (SEM) analysis (n=30). The specimens were randomly assigned to 3 groups: 1 - artificial saliva (control); 2 - cola-type soft drink; and 3 - soy-based orange juice. Immersion cycles in the beverages were undertaken under agitation for 5 min, 3 times a day, during 60 days. Surface microhardness was measured at 7, 15, 30, 45 and 60 days. After 60 days, specimens were bisected and subsurface microhardness was measured at 30, 60, 90, 120, 150 and 200 µm from the surface exposed. Data were analyzed by ANOVA and Tukey’s test (a=0.05). Groups 2 and 3 presented similar decrease of surface microhardness. Regarding subsurface microhardness, group 2 presented the lowest values. SEM images revealed that after 60 days the surfaces clearly exhibited structural loss, unlike those immersed in artificial saliva. It may be concluded that erosion of the surfaces exposed to the cola-type soft drink was more accentuated and directly proportional to the exposure time.

Influence of surface sealant on the translucency of composite resin: effect of immersion time and immersion media

This study evaluated the effect of surface sealant on the translucency of composite resin immersed in different solutions. The study involved the following materials: Charisma, Fortify and coffee, Coca-Cola®, tea and artificial saliva as solutions. Sixty-four specimens (n = 8) were manufactured and immersed in artificial saliva at 37 ± 1 °C. Samples were immersed in the solutions for three times a day and re-immersed in artificial saliva until the translucency readings. The measurements were carried out at nine times: T1 - 24 hours after specimen preparation, T2 - 24 hours after immersion in the solutions, T3 - 48 hours and T4 to T9 - 7, 14, 21, 30, 60 and 90 days, respectively, after immersion. The translucency values were measured using a JOUAN device. The results were subjected to ANOVA and Tukey's test at 5%. The surface sealant was not able to protect the composite resin against staining, the coffee showed the strongest staining action, followed by tea and regarding immersion time, a significant alteration was noted in the translucency of composite resin after 21 days.

In vitro analysis of thermocompaction time and gutta-percha type on quality of main canal and lateral canals filling

The aim of this study was to evaluate the quality of filling in main and lateral root canals performed with the McSpadden technique, regarding the time spent on the procedure and the type of gutta-percha employed. Fifty simulated root canals, made with six lateral canals placed two apiece in the cervical, middle and apical thirds of the root, were divided into 5 groups. Group A: McSpadden technique with conventional gutta-percha, performed with sufficient time for canal filling; Group B: McSpadden technique with conventional gutta-percha, performed in twice the mean time used in Group A; Group C: McSpadden technique with TP gutta-percha, performed with sufficient time for canal filling; Group D: McSpadden technique with TP gutta-percha, performed in twice the mean time used in Group C; Group E: lateral condensation technique. Images of the filled root canals were taken using a stereomicroscope and analyzed using the Leica QWIN Pro software for filling material flow, gutta-percha filling extension and sealer flow. Data were analyzed by analysis of variance (ANOVA) and Tukey test (p < 0.05). The best values of penetration in lateral canals in the middle third occurred in the groups where TP gutta-percha was used. However, in the apical third, group B showed the best values. Although a longer time of compactor use allows greater penetration of the filling material into the lateral canals, the presence of voids resulted in bad quality radiographic images, suggesting porosity. The best quality of filling material was observed in Group A (McSpadden technique with conventional Gutta-Percha, performed with sufficient time for root canal filling).