CHARACTERIZATION OF HIGH FLUENCE NEUTRON-INDUCED DEFECT LEVELS IN HIGH-RESISTIVITY SILICON DETECTORS USING A LASER DEEP-LEVEL TRANSIENT SPECTROSCOPY (L-DLTS)

Neutron irradiated high resistivity (4-6 kOMEGA-cm) silicon detectors in the neutron fluence (PHI(n)) range of 5 X 10(11) n/cm2 to 1 X 10(14) n/cm2 have been studied using a laser deep level transient spectroscopy (L-DLTS). It has been found that the A-center (oxygen-vacancy, E(c) = 0.17 eV) concentration increases with neutron fluence, reaching a maximum at PHI(n) almost-equal-to 5 X 10(12) n/cm2 before decreasing with PHI(n). A broad peak has been found between 200 K and 300 K, which is the result of the overlap of three single levels: the V-V- (E(c) = 0.38 eV), the E-center (P-V, E(c) = 0.44 eV), and a level at E(c) = 0.56 eV that is probably V-V0. At low neutron fluences (PHI(n) < 5 X 10(12) n/cm2), this broad peak is dominated by V-V- and the E-centers. However, as the fluence increases (PHI(n) greater-than-or-equal-to 5 X 10(12) n/cm2), the peak becomes dominated by the level of E(c) = 0.56 eV.

锇的一个重同位素:~(197)Os

利用14 MeV中子轰击天然铂靶,通过~(198)Pt(n,2p)~(197)Os反应产生锇的一种同位素~(197)Os,以γ(X)谱学方法鉴别了它,同时研究了它的衰变性质。观测到了能量为41.2、50.7、196.8、199.6、223.9、233.1、250.2、342.1、403.6和406.4keV的10条新γ射线,并指定为~(197)Os的衰变。测定它的半衰期为2.8±0.6 min。

Pore-filling membrane for direct methanol fuel cells based on sulfonated poly(styrene-ran-ethylene) and porous polyimide matrix

We have synthesized a porous co-polyimide film by coagulating a polyimide precursor in the non-solvent and thermal imidization. Factors affecting the morphology, pore size, porosity, and mechanical strength of the film were discussed. The porous polyimide matrix consists of a porous top layer and a spongy sub-structure with micropores. It is used as a porous matrix to construct sulfonated poly(styrene-ran-ethylene) (SPSE) infiltrated composite membrane for direct methanol fuel cell (DMFC) application. Due to the complete inertness to methanol and the very high mechanical strength of the polyimide matrix, the swelling of the composite membrane is greatly suppressed and the methanol crossover is also significantly reduced, while high proton conductivity is still maintained. Because of its higher proton conductivity and less methanol permeability, single fuel cell performance test demonstrated that this composite membrane outperformed Nafion membrane.

不同去甲肾上腺素剂量下布氏田鼠非颤抖性产热比较

非颤抖性产热是小型哺乳动物的一种重要产热方式。关于其定量测定，一般采用注射去甲肾上腺素（norepinephrine，NE）诱导的最大耗氧量的方式获得。因此，去甲肾上腺素剂量的选择就显得很重要。我们利用常用的3种经验公式计算剂量，即：（1）NE（mg／kg DK）=2．53W^-0．4；（2）NE（mg／kg）=3．3W^0.458；和（3）NE（mg／kg）=6．6W^0.458,W是体重（g），以布氏田鼠为实验对象，测定了3种剂量诱导的非颤抖性产热情况。结果表明，3种剂量都能诱导出最大非颤抖性产热能力，在非颤抖性产热大小上没有显著性差异，分别为6．190±1．342（公式1）、6．166±0．852（公式2）和7．005±1．501（公式3），但公式（3）剂量下体温增加程度显著高于前两个剂量，分别增加了1．9±0．9℃（公式3）、0．9±0．2℃（公式1）和0．7±0．2℃（公式2）。为了防止动物体温过高引起死亡，我们推荐公式（1）和（或）（2）。

CETL's Re-Usable Learning Objects

Completed, available and free to use Learning Objects listed by subject area

Factores psicosociales y bienestar del trabajador en investigaciones realizadas en Colombia y España, durante el período 2002-2012 .

Introducción. En el presente trabajo se pretende identificar los factores psicosociales laborales asociados con el bienestar del trabajador en investigaciones realizadas en Colombia y España, durante el periodo 2002 – 2012. Objetivo. Este trabajo tiene como fin, precisar sobre el desarrollo investigativo en lo referente a los factores psicosociales y su relación con el bienestar, de los trabajadores en Colombia y España durante el período 2002-2012, por medio de los estudios encontrados sobre factores psicosociales y su impacto benéfico en el bienestar del trabajador, marco legal de ambos países, así como también, la revisión documental, consolidación y posterior análisis de la literatura, en torno al estado del arte del presente estudio en relación a los factores psicosociales laborales. Método. Se trata de un estudio documental, realizado por medio, de una revisión de literatura en las bases de datos y posterior selección, clasificación, consolidación, sistematización y análisis de los estudios de investigación encontrados, los cuales, analizaban aspectos relacionados con los factores psicosociales y su relación con el bienestar del trabajador en Colombia y España, durante el período 2002-2012. Resultados. En la revisión documental se evidenció que los estudios referentes a los factores psicosociales y su relación con el bienestar del trabajador, representa un importante y permanente reto para las organizaciones. De la misma manera, se destacan los avances que sobre dicha relación presenta España, pues, en Colombia, aun los estudios siguen direccionados hacia los factores de riesgo o perjudiciales, más que hacia factores protectores o de bienestar, generadores de un efecto benéfico en los trabajadores y por ende en la organización.

Modelo de evaluación para la educación infantil.

Resumen basado en el de la publicación

Trabajo por m??dulos : un modelo de aprendizaje interdisciplinar y colaborativo en el Grado en Ingenier??a en Dise??o Industrial y Desarrollo de Producto

Resumen basado en el de la publicaci??n

Incorporation of a S-glycosidic linkage into a glyconucleoside changes the conformational preference of both furanose sugars

A glyconucleoside containing a thioglycoside linkage, namely 1-(3-S-beta-D-ribofuranosyl-2,3-dideoxy-3-thio-beta-D-ribofuranosyl)-thy mine, has been prepared through condensation of a suitably protected derivative of 3'-thiothymidine with an activated ribose sugar. NMR has been used to study the conformation of the S-disaccharide and the unmodified O-disaccharide. A full pseudorotational analysis showed that for the S-disaccharide, the ribose and deoxy ribose sugars have a preference for the south and north pucker, respectively; which is the reverse of what is seen for the O-disaccharide. (c) 2006 Elsevier Ltd. All rights reserved.

Predicting metal-binding site residues in low-resolution structural models

The accurate prediction of the biochemical function of a protein is becoming increasingly important, given the unprecedented growth of both structural and sequence databanks. Consequently, computational methods are required to analyse such data in an automated manner to ensure genomes are annotated accurately. Protein structure prediction methods, for example, are capable of generating approximate structural models on a genome-wide scale. However, the detection of functionally important regions in such crude models, as well as structural genomics targets, remains an extremely important problem. The method described in the current study, MetSite, represents a fully automatic approach for the detection of metal-binding residue clusters applicable to protein models of moderate quality. The method involves using sequence profile information in combination with approximate structural data. Several neural network classifiers are shown to be able to distinguish metal sites from non-sites with a mean accuracy of 94.5%. The method was demonstrated to identify metal-binding sites correctly in LiveBench targets where no obvious metal-binding sequence motifs were detectable using InterPro. Accurate detection of metal sites was shown to be feasible for low-resolution predicted structures generated using mGenTHREADER where no side-chain information was available. High-scoring predictions were observed for a recently solved hypothetical protein from Haemophilus influenzae, indicating a putative metal-binding site.

Structure and thermal reactivity of Zn(II) salts of isocinchomeronic acid (2,5-pyridinedicarboxylic acid)

The synthesis, an improved refined crystal and molecular structure re-determination, and the thermal decomposition behavior of two Zn(II) derivatives of isocinchomeronic acid (2,5-pyridinedicarboxylic acid or H(2)2,5-pydc) are presented. [Zn(2,5-pydc)(H(2)O)(3)Zn(2,5-pydc)(H(2)O)(2)](2) (1) crystallizes in the triclinic P-1 space group with a = 7.106(2), b = 11.450(2), c = 11.869(1) angstrom, alpha = 107.29(1), beta = 104.08(1), gamma = 90.32(2)degrees, and Z = 2. [Zn(2,5-pydc)(H(2)O)(2)] center dot H(2)O (2) is orthorhombic (P2(1)2(1)2(1) space group), with a = 7.342(1), b = 9.430(1), c = 13.834(2) angstrom, and Z = 4. The structures were refined to agreement R(1)-factors of 0.0315 (1) and 0.0336 (2). Complex (1) is arranged as molecular Zn(4)(2,5-pydc)(4)(H(2)O)(10) tetramers, the cages of which define channels that remain unblocked by anions. Compound (2) is polymeric with Zn(2,5-pydc)(H(2)O)(2) and Zn(2,5-pydc)(H(2)O)(3) units linked through bridging ligands. Both compounds were synthesized under mild conditions in aqueous media, without need to resort to hydrothermal media. Changing the pH from 4.51 to 5.75 suffices to direct the chemical processes toward the orthorhombic compound rather than to the triclinic one.

Mineralogical and microthermometric studies and structural aspects of imperial topaz mineralization in Antonio Pereira, Ouro Preto District (Minas Gerais) - Brazil

The occurrences of imperial topaz in the Antonio Pereira mine, Ouro Preto, Minas Gerais, are associated with the metamorphic carbonate rocks of the Minas Supergroup. The crystals have densities varying from 3.46 to 3.58. The parameters of the unitary cells obtained were: 4.658 to 4.663 angstrom (ao), 8.823 to 8.832 angstrom (b(o)), 8.382 to 8.389 angstrom (c(o)), and 344.65 to 345.46 angstrom 3 (V). The refraction indices presented the following variations: 1.622 to 1.630 (nX), 1.624 to 1.632 (nY), 1.633 to 1.640 (nZ), and 0.008 to 0.011 (B). These properties are coherent with the low fluorine contents obtained (16,48%/17,05wt%). Infrared spectroscopy and microthermometry showed that the fluid inclusions, which represent the mineralizing fluids, are formed by H(2)O (with Ca(2+), Mg(2+) and Na(+)), and CO(2) +/- CH(4). The minimal trapping T-P conditions of 290/320 degrees C and 2,349/2,497bar were obtained for the primary fluid inclusions. The pseudo-secondary fluid inclusions were trapped at conditions of lower temperatures and variable pressures, during the deformation process under local alternating states of stress. The microthermometric studies, the structural analysis and the fluorine contents suggest that the mineralized veins were formed from hydrothermal fluids originated during the Brasiliano tectono-metamorphic event.

The six-minute walk test and body weight-walk distance product in healthy Brazilian subjects

We assessed the 6-min walk distance (6MWD) and body weight x distance product (6MWw) in healthy Brazilian subjects and compared measured 6MWD with values predicted in five reference equations developed for other populations. Anthropometry, spirometry, reported physical activity, and two walk tests in a 30-m corridor were evaluated in 134 subjects (73 females, 13-84 years). Mean 6MWD and 6MWw were significantly greater in males than in females (622 ± 80 m, 46,322 ± 10,539 kg.m vs 551 ± 71 m, 36,356 ± 8,289 kg.m, P < 0.05). Four equations significantly overestimated measured 6MWD (range, 32 ± 71 to 137 ± 74 m; P < 0.001), and one significantly underestimated it (-36 ± 86 m; P < 0.001). 6MWD significantly correlated with age (r = -0.39), height (r = 0.44), body mass index (r = -0.24), and reported physical activity (r = 0.25). 6MWw significantly correlated with age (r = -0.21), height (r = 0.66) and reported physical activity (r = 0.25). The reference equation devised for walk distance was 6MWDm = 622.461 - (1.846 x Ageyears) + (61.503 x Gendermales = 1; females = 0); r2 = 0.300. In an additional group of 85 subjects prospectively studied, the difference between measured and the 6MWD predicted with the equation proposed here was not significant (-3 ± 68 m; P = 0.938). The measured 6MWD represented 99.6 ± 11.9% of the predicted value. We conclude that 6MWD and 6MWw variances were adequately explained by demographic and anthropometric attributes. This reference equation is probably most appropriate for evaluating the exercise capacity of Brazilian patients with chronic diseases.

Alterações no número de cópias genômicas em carcinomas de mama

Pós-graduação em Ciências Biológicas (Genética) - IBB