Predicting surgical outcomes for paediatric spinal deformity patients using subject specific finite element models

INTRODUCTION Adolescent idiopathic scoliosis (AIS) is a spinal deformity, which may require surgical correction by attaching rods to the patient’s spine using screws inserted into the vertebrae. Complication rates for deformity correction surgery are unacceptably high. Determining an achievable correction without overloading the adjacent spinal tissues or implants requires an understanding of the mechanical interaction between these components. Our novel patient specific modelling software creates individualized finite element models (FEM) representing the thoracolumbar spine and ribcage of scoliosis patients. We have recently applied the model to investigate the influence of increasing magnitudes of surgically applied corrective force on predicted deformity correction...

Optimizing the quantum dot: Plasmon interaction in a nano gap waveguide

Spontaneous emission (SE) of a Quantum emitter depends mainly on the transmission strength between the upper and lower energy levels as well as the Local Density of States (LDOS)[1]. When a QD is placed in near a plasmon waveguide, LDOS of the QD is increased due to addition of the non-radiative decay and a plasmonic decay channel to free space emission[2-4]. The slow velocity and dramatic concentration of the electric field of the plasmon can capture majority of the SE into guided plasmon mode (Гpl ). This paper focused on studying the effect of waveguide height on the efficiency of coupling QD decay into plasmon mode using a numerical model based on finite elemental method (FEM). Symmetric gap waveguide considered in this paper support single mode and QD as a dipole emitter. 2D simulation models are done to find normalized Гpl and 3D models are used to find probability of SE decaying into plasmon mode ( β) including all three decay channels. It is found out that changing gap height can increase QD-plasmon coupling, by up to a factor of 5 and optimally placed QD up to a factor of 8. To make the paper more realistic we briefly studied the effect of sharpness of the waveguide edge on SE emission into guided plasmon mode. Preliminary nano gap waveguide fabrication and testing are already underway. Authors expect to compare the theoretical results with experimental outcomes in the future

Semi-analytical finite element analysis of a strip footing on an elastic reinforced soil

A plane strain elastic interaction analysis of a strip footing resting on a reinforced soil bed has been made by using a combined analytical and finite element method (FEM). In this approach the stiffness matrix for the footing has been obtained using the FEM, For the reinforced soil bed (halfplane) the stiffness matrix has been obtained using an analytical solution. For the latter, the reinforced zone has been idealised as (i) an equivalent orthotropic infinite strip (composite approach) and (ii) a multilayered system (discrete approach). In the analysis, the interface between the strip footing and reinforced halfplane has been assumed as (i) frictionless and (ii) fully bonded. The contact pressure distribution and the settlement reduction have been given for different depths of footing and scheme of reinforcement in soil. The load-deformation behaviour of the reinforced soil obtained using the above modelling has been compared with some available analytical and model test results. The equivalent orthotropic approach proposed in this paper is easy to program and is shown to predict the reinforcing effects reasonably well.

Influence of friction during forming processes-a study using a numerical simulation technique

Friction has an important influence in metal forming operations, as it contributes to the success or otherwise of the process. In the present investigation, the effect of friction on metal forming was studied by simulating compression tests on cylindrical Al-Mg alloy using the finite element method (FEM) technique. Three kinds of compression tests were considered wherein a constant coefficient of friction was employed at the upper die-work-piece interface. However, the coefficient of friction between the lower die-work-piece interfaces was varied in the tests. The simulation results showed that a difference in metal flow occurs near the interfaces owing to the differences in the coefficient of friction. It was concluded that the variations in the coefficient of friction between the dies and the work-piece directly affect the stress distribution and shape of the work-piece, having implications on the microstructure of the material being processed.

Finite Element Solution Of Surface-Tension Driven Flows In Laser Surface-Melting

Lasers are very efficient in heating localized regions and hence they find a wide application in surface treatment processes. The surface of a material can be selectively modified to give superior wear and corrosion resistance. In laser surface-melting and welding problems, the high temperature gradient prevailing in the free surface induces a surface-tension gradient which is the dominant driving force for convection (known as thermo-capillary or Marangoni convection). It has been reported that the surface-tension driven convection plays a dominant role in determining the melt pool shape. In most of the earlier works on laser-melting and related problems, the finite difference method (FDM) has been used to solve the Navier Stokes equations [1]. Since the Reynolds number is quite high in these cases, upwinding has been used. Though upwinding gives physically realistic solutions even on a coarse grid, the results are inaccurate. McLay and Carey have solved the thermo-capillary flow in welding problems by an implicit finite element method [2]. They used the conventional Galerkin finite element method (FEM) which requires that the pressure be interpolated by one order lower than velocity (mixed interpolation). This restricts the choice of elements to certain higher order elements which need numerical integration for evaluation of element matrices. The implicit algorithm yields a system of nonlinear, unsymmetric equations which are not positive definite. Computations would be possible only with large mainframe computers.Sluzalec [3] has modeled the pulsed laser-melting problem by an explicit method (FEM). He has used the six-node triangular element with mixed interpolation. Since he has considered the buoyancy induced flow only, the velocity values are small. In the present work, an equal order explicit FEM is used to compute the thermo-capillary flow in the laser surface-melting problem. As this method permits equal order interpolation, there is no restriction in the choice of elements. Even linear elements such as the three-node triangular elements can be used. As the governing equations are solved in a sequential manner, the computer memory requirement is less. The finite element formulation is discussed in this paper along with typical numerical results.

A three-dimensional hybrid smoothed finite element method (H-SFEM) for nonlinear solid mechanics problems

This paper presents a novel three-dimensional hybrid smoothed finite element method (H-SFEM) for solid mechanics problems. In 3D H-SFEM, the strain field is assumed to be the weighted average between compatible strains from the finite element method (FEM) and smoothed strains from the node-based smoothed FEM with a parameter α equipped into H-SFEM. By adjusting α, the upper and lower bound solutions in the strain energy norm and eigenfrequencies can always be obtained. The optimized α value in 3D H-SFEM using a tetrahedron mesh possesses a close-to-exact stiffness of the continuous system, and produces ultra-accurate solutions in terms of displacement, strain energy and eigenfrequencies in the linear and nonlinear problems. The novel domain-based selective scheme is proposed leading to a combined selective H-SFEM model that is immune from volumetric locking and hence works well for nearly incompressible materials. The proposed 3D H-SFEM is an innovative and unique numerical method with its distinct features, which has great potential in the successful application for solid mechanics problems.

En förutbestämd sanning : Barnamord och delaktighet i 1700-talets Finland belysta genom kön, kropp och social kontroll

The study analyses the prevention or endorsing of the crime of infanticide in Finland 1702 1807, rather than the result. Also the impacts of the female body, biology of childbirth and experiences of pregnancy are examined, together with insights from modern medical research. Circumstances are reconstructed by a critical reading of judicial records on all levels of the judicial system. In all 269 cases of infanticide and 142 accessory crimes within the jurisdiction of the Turku court of appeal are studied, with particular focus on exceptionally well recorded cases of 83 accused women and 41 women and men accused of being party to the crime. Secondary sources are medical and jurisprudential writings, the public debate on infanticide, broadsheets and letters asking the King for pardon. Infanticide was considered murder by law. Unmarried women were predetermined as the main culprits. Nevertheless, deliberate infanticides were rare and committed mostly in accomplice. The majority of the infanticides studied were cases where inexperienced and unmarried women accidentally had given birth alone and usually to a dead child. Unaware that the pain they were experiencing was in fact a labour, the accused women instinctively sought solitude to push out the child. Some misunderstood the birth as an urgent need to defecate. The unexpected delivery ended in hiding the baby without remorse. This crime was promoted by several factors in Finnish rural culture, amongst others that also married women hid their pregnancy. The immediate household members did not necessarily know about the childbirth and failed to help the woman. This typical pattern in most cases of infanticide in 18th century Finland is also recorded in modern cases of unknown pregnancies. Fear of accountability prevented witnesses testifying to the actual course of events. The truth remained elusive. With only a few exceptions, the women were sentenced to death or imprisonment. The majority of those accused of accomplice were acquitted. However, too harsh sentences for accidents affected the reporting of the crime. Criminal politics failed to curtail infanticide as the crime was unsatisfactorily addressed by law, society and the judicial system.

History, Transfer, Politics : Five studies on the legacy of Uppsala philosophy

The Uppsala school of Axel Hägerström can be said to have been the last genuinely Swedish philosophical movement. On the other hand, the Swedish analytic tradition is often said to have its roots in Hägerström s thought. This work examines the transformation from Uppsala philosophy to analytic philosophy from an actor-based historical perspective. The aim is to describe how a group of younger scholars (Ingemar Hedenius, Konrad Marc-Wogau, Anders Wedberg, Alf Ross, Herbert Tingsten, Gunnar Myrdal) colonised the legacy of Hägerström and Uppsala philosophy, and faced the challenges they met in trying to reconcile this legacy with the changing philosophical and political currents of the 1930s and 40s. Following Quentin Skinner, the texts are analysed as moves or speech acts in a particular historical context. The thesis consists of five previously published case studies and an introduction. The first study describes how the image of Hägerström as the father of the Swedish analytic tradition was created by a particular faction of younger Uppsala philosophers who (re-) presented the Hägerströmian philosophy as a parallel movement to logical empiricism. The second study examines the confrontations between Uppsala philosophy and logical empiricism in both the editorial board and in the pages of Sweden s leading philosophical journal Theoria. The third study focuses on how the younger generation redescribed Hägerströmian legal philosophical ideas (Scandinavian Legal Realism), while the fourth study discusses how they responded to the accusations of a connection between Hägerström s value nihilistic theory and totalitarianism. Finally, the fifth study examines how the Swedish social scientist and Social Democratic intellectual Gunnar Myrdal tried to reconcile value nihilism with a strong political programme for social reform. The contribution of this thesis to the field consists mainly in a re-evaluation of the role of Uppsala philosophy in the history of Swedish philosophy. From this perspective the Uppsala School was less a collection of certain definite philosophical ideas than an intellectual legacy that was the subject of fierce struggles. Its theories and ideas were redescribed in various ways by individual actors with different philosophical and political intentions.

Poetics of Subjectivity : Existence and Expressivity in Simone de Beauvoir's Philosophy

In the last thirty years, primarily feminist scholars have drawn attention to and re-evaluated the philosophy of Simone de Beauvoir (1908 1986). Her philosophical practice has been described as non-systematic, and her literary writing has been viewed as part of her non-systematic mode of philosophising. This dissertation radically deepens the question concerning Beauvoir s philosophical motivations for turning to literature as a mode to express subjectivity. It explicates the central concepts of Beauvoir s philosophy of existence, which are subjectivity, ambiguity, paradox and temporality, and their background in the modern traditions of existential philosophy and phenomenology. It also clarifies Beauvoir s main reason to turn to literature in order to express subjectivity as both singular and universal: as a specific mode of communication, literature is able to make the universality of existence manifest in the concrete, singular and temporal texture of life. In addition, the thesis gives examples of how Beauvoir s literary works contribute to an understanding of the complexity of subjectivity. I use the expression poetics of subjectivity to refer to the systematic relation between Beauvoir s existential and phenomenological notion of subjectivity and her literary works, and to her articulations of a creative mode of using language, especially in the novel. The thesis is divided into five chapters, of which the first three investigate Beauvoir s philosophy of existence at the intersection of the modern traditions of thought that began with René Descartes and Søren Kierkegaard s intuitions about subjectivity. Chapter 1 interprets Beauvoir s notion of ambiguity, as compared to paradox, and argues that both determine her notion of existence. Chapters 2 and 3 investigate the phenomenological side of Beauvoir s philosophy through a study of her response to early French interpretations of transcendental subjectivity, especially in the works of Jean-Paul Sartre and Maurice Merleau-Ponty. My analysis shows that Edmund Husserl s distinction between different levels of subjective experience is central to Beauvoir s understanding of subjectivity and to the different ego concepts she uses. Chapter 4 is a study of Beauvoir s reflections on the expression of subjective thought, and, more specifically, her philosophical conceptions of the metaphysical novel and the autobiography as two modes of indirect communication. Chapter 5, finally, compares two modes of investigating concrete subjectivity; Beauvoir s conceptual study of femininity in Le deuxième sexe and her literary expression of subjectivity in the novel L Invitée. My analysis reveals and explicates Beauvoir s original contribution to a comprehensive understanding of the becoming and paradox of human existence: the fundamental insight that these phenomena are sexed, historically as well as imaginatively.

Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions

Transmission loss of a rectangular expansion chamber, the inlet and outlet of which are situated at arbitrary locations of the chamber, i.e., the side wall or the face of the chamber, are analyzed here based on the Green's function of a rectangular cavity with homogeneous boundary conditions. The rectangular chamber Green's function is expressed in terms of a finite number of rigid rectangular cavity mode shapes. The inlet and outlet ports are modeled as uniform velocity pistons. If the size of the piston is small compared to wavelength, then the plane wave excitation is a valid assumption. The velocity potential inside the chamber is expressed by superimposing the velocity potentials of two different configurations. The first configuration is a piston source at the inlet port and a rigid termination at the outlet, and the second one is a piston at the outlet with a rigid termination at the inlet. Pressure inside the chamber is derived from velocity potentials using linear momentum equation. The average pressure acting on the pistons at the inlet and outlet locations is estimated by integrating the acoustic pressure over the piston area in the two constituent configurations. The transfer matrix is derived from the average pressure values and thence the transmission loss is calculated. The results are verified against those in the literature where use has been made of modal expansions and also numerical models (FEM fluid). The transfer matrix formulation for yielding wall rectangular chambers has been derived incorporating the structural–acoustic coupling. Parametric studies are conducted for different inlet and outlet configurations, and the various phenomena occurring in the TL curves that cannot be explained by the classical plane wave theory, are discussed.

Lagöversättning som process och produkt : Revideringar och institutioner vid lagöversättning till svenska i Finland

The thesis studies the translation process for the laws of Finland as they are translated from Finnish into Swedish. The focus is on revision practices, norms and workplace procedures. The translation process studied covers three institutions and four revisions. In three separate studies the translation process is analyzed from the perspective of the translations, the institutions and the actors. The general theoretical framework is Descriptive Translation Studies. For the analysis of revisions made in versions of the Swedish translation of Finnish laws, a model is developed covering five grammatical categories (textual revisions, syntactic revisions, lexical revisions, morphological revisions and content revisions) and four norms (legal adequacy, correct translation, correct language and readability). A separate questionnaire-based study was carried out with translators and revisers at the three institutions. The results show that the number of revisions does not decrease during the translation process, and no division of labour can be seen at the different stages. This is somewhat surprising if the revision process is regarded as one of quality control. Instead, all revisers make revisions on every level of the text. Further, the revisions do not necessarily imply errors in the translations but are often the result of revisers following different norms for legal translation. The informal structure of the institutions and its impact on communication, visibility and workplace practices was studied from the perspective of organization theory. The results show weaknesses in the communicative situation, which affect the co-operation both between institutions and individuals. Individual attitudes towards norms and their relative authority also vary, in the sense that revisers largely prioritize legal adequacy whereas translators give linguistic norms a higher value. Further, multi-professional teamwork in the institutions studied shows a kind of teamwork based on individuals and institutions doing specific tasks with only little contact with others. This shows that the established definitions of teamwork, with people co-working in close contact with each other, cannot directly be applied to the workplace procedures in the translation process studied. Three new concepts are introduced: flerstegsrevidering (multi-stage revision), revideringskedja (revision chain) and normsyn (norm attitude). The study seeks to make a contribution to our knowledge of legal translation, translation processes, institutional translation, revision practices and translation norms for legal translation. Keywords: legal translation, translation of laws, institutional translation, revision, revision practices, norms, teamwork, organizational informal structure, translation process, translation sociology, multilingual.

Konstruktioner och valens : Verbfraser med åt i ett jämförande perspektiv

Det har knappast undgått någon som är språkligt medveten att finlandssvenskan och sverigesvenskan skiljer sig åt till vissa delar. Olikheterna återfinns på olika språkliga nivåer. Mest kända och omskrivna är de lexikologiska skillnaderna, dvs. skillnaderna på ordplanet. Betydligt mindre uppmärksamhet har ägnats syntaktiska skillnader, dvs. skillnader i hur satser och meningar byggs upp. För att öka kunskapen om finlandssvensk syntax initierade Språkvetenskapliga nämnden vid Svenska litteratursällskapet i Finland projektet Svenskan i Finland – syntaktiska drag i ett jämförande perspektiv, som pågick åren 2004–2006. Min avhandling har kommit till inom ramen för det projektet. Prepositionerna (t.ex. av, i, på, för, till, åt osv.) är så kallade funktionsord som har till uppgift att binda samman de mer betydelsetunga orden till satser och meningar. Den finlandssvenska prepositionsanvändningen skiljer sig i viss mån från den sverigesvenska, och ”åt” är en av de prepositioner som ofta lyfts fram som exempel. Finlandssvenskarna säger t.ex. ”han gav en bok åt Lena” i stället för ”han gav en bok till Lena” eller ”han gav Lena en bok”. De säger ”berätta något åt någon” (i stället för ”för”) och de säger ”ringa åt någon” i stället för ”ringa någon”. Ett huvudsyfte med min undersökning är att ta reda på hur pass stora skillnaderna är om man ser till samtliga belägg på ”åt” i ett material och inte bara till sådana som man fäster sig vid för att man vet att de avviker i finlandssvenskan. Undersökningen är korpusbaserad. Det betyder att jag letat efter alla belägg på kombinationer av verb och prepositionen ”åt” i rätt stora textmassor som finns tillgängliga i elektronisk form. Materialet ligger i Språkbanken i Finland och omfattar huvudsakligen tidningstext och skönlitteratur. Jag har använt mig av en textmassa på sammanlagt ungefär 40 miljoner löpande ord, drygt 23 miljoner finlandssvenska och drygt 19 miljoner sverigesvenska. Det materialet gav ca 20 000 åt-belägg att studera, och det visade sig något oväntat att ”åt” inte alls är vanligare i finlandssvenskan än i sverigesvenskan när det gäller skriftspråk, åtminstone inte i professionella skribenters språk. Om man kompenserar för att den finlandssvenska och den sverigesvenska korpusen inte är helt lika i fråga om genrefördelning och ålder, kommer man fram till i stort sett samma frekvens för ”åt” i båda korpusarna. För den närmare analysen av vilka mönster åt-beläggen uppvisar har jag först och främst utnyttjat konstruktionsgrammatik men också ramsemantik och valensteori. Konstruktionsgrammatiken är ingen enhetlig teori, men tanken om grammatiska konstruktioner är gemensam. Konstruktioner representerar allt från generella syntaktiska mönster till specifika mönster för språkliga enskildheter. Uppfattningen om vad som ska inbegripas i begreppet varierar, men definitionen av ”konstruktion” som ”par (eller konstellationer) av form och betydelse” är gemensam. ”Konstruktion” avser aldrig konkreta belägg i texter eller yttranden utan alltid det abstrakta mönstret bakom dessa. Och varje yttrande är resultatet av att en stor mängd konstruktioner samverkar. I min analys har jag utgått ifrån att beläggen med ”åt” kan återföras på olika konstruktioner eller mönster utifrån vad som är gemensamt för grupper av belägg. Jag har sett på vad åt-frasen i samverkan med verbet har för funktion i beläggen. En åt-fras är syntaktiskt en prepositionsfras och består av en preposition och en rektion. Exempelvis utgör ordparet ”åt skogen” en prepositionsfras där ”skogen” är rektion. Ur mitt material har jag kunnat abstrahera fram fem övergripande mönster där referenten för rektionen har olika så kallade semantiska roller. Åt-frasen kan i kombination med verbet ange mål eller riktmärke, som i t.ex. svänga åt höger, dra åt helvete, ta sig åt hjärtat, luta åt en seger för IFK. Den kan för det andra ange mottagare (t.ex. ge varsin kaka åt hundarna, bygga en bastu åt sina svärföräldrar, skaffa biljetter åt en kompis). För det tredje kan åt-frasen avse en referent som har nytta (eller skada) av en aktion (t.ex. klippa häcken åt grannen, ställa in digitalboxen åt sin moster). Åt-frasen kan slutligen avse den eller det som är föremål antingen för en kommunikationsaktion (vinka åt sin son, skratta åt eländet) eller en attityd eller känsla (glädja sig åt framgången). Utöver dessa huvudmönster finns det ett antal smärre grupper av belägg som bildar egna mönster, men de utgör sammanlagt under 3 % i bägge korpusarna. Inom grupperna kan undermönster urskiljas. I t.ex. mottagargruppen representerar ”ge varsin kaka åt hundarna” överföringskonstruktion, ”bygga en bastu åt sina svärföräldrar” produktionskonstruktion och ”skaffa biljetter åt en kompis” ombesörjningskonstruktion. Alla typer är gemensamma för bägge materialen, men andelen belägg som representerar de olika typerna skiljer sig betydligt. I det sverigesvenska materialet står t.ex. det mönster där åt-frasen avser mål eller riktmärke för en mycket större andel av beläggen än i finlandssvenskan. Också andelen belägg där åt-frasen avser någon som har nytta (eller skada) av en aktion är mycket högre i det sverigesvenska materialet. I det finlandssvenska materialet står i gengäld mottagarbeläggen för över 50 % av beläggen medan andelen i det sverigesvenska materialet är bara 30 %. Inom gruppen utgör belägg av produktions- och ombesörjningstyp dessutom en mindre andel i det finlandssvenska materialet än i det sverigesvenska. Dessa står till sin funktion nära den typ som avser den som har nytta av aktionen. De konkreta beläggen på överföring (ge varsin kaka åt hundarna) utgör en större andel i det finlandssvenska materialet än i det sverigesvenska (ca 8 % mot 3 %), men typiskt för båda materialen är hög kollokationsgrad (”kollokation” avser par eller grupper av ord som uppträder oftare tillsammans än de statiskt sett skulle göra vid helt slumpmässig förekomst). Största delen av mottagarbeläggen utgörs av fraser av typen ”ge arbete åt någon, ge eftertryck åt något, ge liv åt något; ägna tid åt något, ägna sitt liv åt något, ägna uppmärksamhet åt något”. De här slutsatserna gäller alltså skriftspråk. I talspråk ser fördelningen annorlunda ut. Typiskt för prepositionen ”åt” är överhuvudtaget hög kollokationsgrad. Det förefaller som om språkanvändarna har tydliga, färdiga mallar för var ”åt” kan komma in. Det enda mönster som verkar helt produktivt, i den meningen att elementen är i stort sett fritt kombinerbara, är kombinationer av verb och åt-fras där åt-frasen avser den som har nytta av något. Att någon utför något för någons räkning verkar överlag kunna uttryckas med prepositionen ”åt”: t.ex. ”tvätta bilen åt pappa, ringa efter en taxi åt kunden”. Till och med belägg av typen ”hon drömde åt honom att bli ordinarie adjunkt” förekommer i någon mån. Konstruktionen är produktiv i båda språkvarieteterna men uppenbart är att konstruktion med mottagare har tolkningsföreträde i vissa fall i finlandssvenskan: ”Filip skrev ett brev åt sin syster” tolkas av sverigesvenskar som att Filip skrev brevet för systerns räkning, medan finlandssvenskar överlag uppenbarligen tolkar det som att Filip skrev till sin syster, att systern var mottagare av brevet. Ungefär 20 % av alla belägg i båda materialen representerar fall där ”åt” utgör partikel. Verb och ”åt” är närmare förbundna med varandra än när ”åt” utgör normal preposition. Exempel på partikelbelägg är ”han kom inte åt strömbrytaren, det gick åt mängder med saft, landet får dra åt svångremmen, de roffade åt sig de bästa platserna”. Också partikelmaterialet ser på ett generellt plan väldigt lika ut i båda språkvarieteterna. Den största skillnaden uppvisar den reflexiva typen ”roffa åt sig”. Medan typen är mycket homogen i det sverigesvenska materialet är variationen större i det finlandsvenska. Dels uppträder fler verb i kombinationen (han köpte åt sig ett par jeans), dels vacklar ordföljden (han nappade åt sig ett paraply ~ han nappade ett paraply åt sig). Att ”åt” används mer i vissa funktioner i finlandsvenskan brukar förklaras med påverkan från finskans allativ (ändelsen -lle: hän antoi kirjan Astalle > hon gav en bok åt Asta). Allt tyder dock på att den finlandssvenska åt-användningen delvis är en relikt. I äldre sverigesvenska källor träffar man på ”åt” i sådana kontexter som numera är typiska för finlandsvenskan. Det finlandssvenska språkområdet ligger ute i periferin i relation till det språkliga centrum som förändringar sprider sig från (för svenskans del främst Stockholmstrakten) och typiskt för perifera områden är att de uppvisar ålderdomliga drag också när inga kontaktfenomen spelar in. Allativen kan naturligtvis ha bidragit till att bevara användningen av ”åt” i finlandssvenskan. Att det är just ”åt” som används” beror antagligen på att prepositionen har flest funktioner gemensamt med allativen rent kognitivt om man jämför med de betydligt mer frekventa prepositionerna ”till” och ”för”. Uppenbart är också att åt-användningen därtill lever sitt eget liv i finlandssvenskan. I vissa varieteter av finlandssvenska kan man t.ex. höra yttranden av typ ”alla fiskarna dog åt dom”. Som språklig enskildhet har det ingen finsk förebild med allativ. Yttrandet är ett exempel på töjning av en svensk konstruktion. Modell finns dels i det mönster där åt avser den som har nytta eller skada av något, dels i relationell användning av ”åt”: han är hantlangare åt Eriksson ~ han är Erikssons hantlangare. Vid språkkontakt är det överlag konstruktioner som har förebild i det låntagande språket som lånas in från det långivande språket, medan konstruktioner som saknar förebild är betydligt mindre benägna att vinna insteg.

Meän tapa puhua : Tornionlaakso pellolaisnuorten subjektiivisena paikkana ja murrealueena

This folk linguistic and human geographic study deals with dialect awareness, dialect use and place attachment. The study discusses theoretical and methodological issues current in sociolinguistics suggesting that the study of attitudes should be regarded as a core area in the study of variation and change. Furthermore, it is suggested that instead of putting effort into improving mental mapping methodology (adopted into folk linguistics from behavioural geography of the 1960 s), the more up-to-date thinking of space in geography should be adopted. The region and the dialect are treated as perceptual constructs in the study. The dialect perceptions of high school seniors in the Finnish Tornio Valley are examined trough a triangulation method involving a questionnaire, interviews and dialect recognition test as the research methods. The h in non-initial syllables (e.g. lähethä(ä)n, saunhaan ~ sauhnaan let s go into sauna ) turns out, expectedly, as the most salient feature in the dialect awareness of the locals and in terms of local identity construction. This feature is no longer heard in most of the present dialects of Finnish but is still thriving in the Tornio Valley in the cross-border dialect area. The metathetic variant (saunhaan > sauhnaan into sauna , käymhään > käyhmään to go ) is a characteristic feature of the Tornio Valley dialect. However, individual differences have long been found in the use of the h. This study challenges the essentialist variationist view of social categories (gender) by analysing variation from a quantitative but emic and human geographic point of view. The study shows that the variation of the h is statistically significantly patterned in terms of the degree of feeling of insideness vs. outsideness. New light is shed on the gender differences found in earlier sociolinguistic studies: differences in dialect use between and inside gender groups are illuminated by the fact that, in this case, it is young women who are generally less attached to the local community than young men, but this does not hold for all the individuals. The ideological motivation for preservation of the h seems to be based on the imagined community of Tornio Valley covering both the Swedish and the Finnish valley area. The general image of the dialect area and it s speakers, the shared cognitive dialect boundaries of the locals and the particularly deep level of awaress of the linguistic variation of the h are notable resources of the Tornio valley identity. Hyperdialectic forms analogical to the most frequently attested metathetic forms are found in the interview data, predicting that in this dialect the h will be maintained also in the future.

Genus i östra Nyland : från dialektutjämning till dialektmarkör

Gender in eastern Nyland – from dialect levelling to identity marking The study of dialect leveling in eastern Nyland focuses on variation and change in the Swedish dialects of Nyland (Fi. Uusimaa) on the south coast of Finland. During the last century the grammatical gender system of the dialects in the area has been reduced from a three-gender system to a two-gender system (cf. Corbett 1991). The present study is based on five linguistic variables in the gender system: the anaphoric pronouns (han, hon, den) when used for inanimates; the neuter pronouns he(t) and de(t) – when used anaphorically or as expletives; and three different types of morphological postposed definite articles. For all these variables, both dialect variants and standard variants are used in the dialects. Within the study of processes of variation and change, the work focuses on the mechanisms of leveling, simplification and reallocation; cf. Trudgill (1986) and Hinskens, Auer Kerswill (2005). With regard to the reductions of the gender system, the possibility that some of these variables might have turned into becoming dialect markers (Labov 1972) in the modern varieties of eastern Nyland is given special attention. The primary data consist of tape recordings with 25 informants done in the 1960s and 1970s. The informants were born in 1881–1913. In addition, recent changes were investigated in detail in tape recordings from 2005–2008 with 15 informants, who were born in the period 1927–1947 or 1976–1988. The study combines quantitative and qualitative methods in the systematic analysis of the data. Theoretically and methodologically the study relies on methods and results from variation studies and socio-dialectology, as well as on methods and results from traditional dialectology; cf. Ahlbäck (1946) and the dictionary of Swedish dialects, Ordbok över Finlands svenska folkmål, (1976–). The results show that there are different strategies among the informants in their use of the features studied. In the modern varieties of the dialects, most of the informants use only two genders, uter and neuter. Of the variables, the masculine pronoun for inanimates, the traditional neuter pronoun he(t) and some variants of the traditional definite articles have received a new function as dialect markers in my data. These changes first affect the gender distinctions, and the function of marking gender is lost; gradually the features then get new functions as dialect markers through processes of dialect leveling and reallocation. These processes are connected to changes taking place in the communities in eastern Nyland because of urbanization. When the dialect speakers experience that the traditional values of both the dialects and the culture are threatened, they begin to mark their dialectal identity by using dialect markers in their speech.

Estimation of gear tooth deflection by the finite element method

The finite element method (FEM) is used to determine for pitch-point, mid-point and tip loading, the deflection curve of a Image 1 diamentral pitch (DP) standard spur gear tooth corresponding to number of teeth of 14, 21, 26 and 34. In all these cases the deflection of the gear tooth at the point of loading obtained by FEM is in good agreement with the experimental value. The contraflexure in the deflection curve at the point of loading observed experimentally in the cases of pitch-point and mid-point loading, is predicted correctly by the FEM analysis.