Three-phase three-level current-source converter for EVs fast battery charging systems

This paper presents a three-phase three-level fast battery charger for electric vehicles (EVs) based in a current-source converter (CSC). Compared with the traditional voltage-source converters used for fast battery chargers, the CSC can be seen as a natural buck-type converter, i.e., the output voltage can assume a wide range of values, which varies between zero and the maximum instantaneous value of the power grid phase-to-phase voltage. Moreover, using the CSC it is not necessary to use a dc-dc back-end converter in the battery side, and it is also possible to control the grid current in order to obtain a sinusoidal waveform, and in phase with the power grid voltage (unitary power factor). Along the paper is described in detail the proposed CSC for EVs fast battery charging systems: the circuit topology, the power control theory, the current control strategy and the grid synchronization algorithm. Several simulation results of the EV fast battery charger operating with a maximum power of 50 kW are presented.

A novel architecture of a bidirectional bridgeless interleaved converter for EV battery chargers

This paper presents a novel architecture of a bidirectional bridgeless interleaved converter for battery chargers of electric vehicles (EVs). The proposed converter is composed by two power stages: an ac-dc converter that is used to interface the power grid and the dc-link, and a dc-dc converter that is used to interface the dc-link and the batteries. The ac-dc converter is an interleaved bridgeless bidirectional boost-type converter and the dc-dc converter is a bidirectional buck-boost-type converter. The proposed converter works with sinusoidal grid current and with high power factor for all operating power levels, and in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) operation modes. In the paper is described in detail the proposed converter for EV battery chargers: the circuit topology, the principle of operation, the power control theory, and the current control strategy. Several simulation results for both G2V and V2G operation modes are presented.

A novel concept of unidirectional bridgeless combined boost-buck converter for EV battery chargers

This paper presents a novel concept of unidirectional bridgeless combined boost-buck converter for electric vehicles (EVs) battery chargers. The proposed converter is composed by two power stages: an ac-dc front-end converter used to interface the power grid and the dc-link, and a dc-dc back-end converter used to interface the dc-link and the batteries. The ac-dc converter is a bridgeless boost-type converter and the dc-dc converter is an interleaved buck-type converter. The proposed converter operates with sinusoidal grid current and unitary power factor for all operating power levels. Along the paper is described in detail the proposed converter for EV battery chargers: the circuit topology, the different stages describing the principle of operation, the power control theory, and the current control strategy, for both converters. Along the paper are presented several simulation results for a maximum power of 3.5 kW.

Desenvolvimento de um Controlador com DSP para um Motor CA de 30 kW para o CEPIUM

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores

Desenvolvimento de um Posto de Carregamento Lento com BMS e Interface com o Cockpit para o CEPIUM

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

Desenvolvimento de um Range Extender para Veículo Elétrico

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

Desenvolvimento de um motor BMW para servir de Range Extender

Dissertação de mestrado integrado em Engenharia Mecânica

Ampliació i millora d'un vehicle teledirigit

En el projecte Ampliació i millora d’un vehicle teledirigit s’ha dut a terme l’ampliació d’un prototip de vehicle ràdio controlat fent servir dues plaques Arduino Duemilanove. Una es situa en el comandament i l’altra en el vehicle i controlen el comportament dels dos dispositius. Es transmet la informació necessària entre elles a través de dos mòduls XBee que posteriorment se’ls hi incorpora. Les plaques fetes servir en el prototip inicial eren unes SARD-13192 de Freescale i el primer que es fa en aquest sentit és una revisió del codi font utilitzat i l’adaptació a les plaques Arduino. Un acceleròmetre ADXL335 que s’incorpora a una de les plaques permet que el prototip es pugui controlar segons la posició del comandament. A més, un cop finalitzat el nou prototip és capaç de desplaçar-se endavant i endarrere, girar aturat i en moviment, i a diferents velocitats que es representen en tot moment en uns LEDs. També guarda l’últim circuit efectuat que es pot reproduir a voluntat de l’usuari, i emmagatzema les dades del recorregut de tota una sessió per exportar a l’ordinador. Per últim s’han dut a terme les proves necessàries per constatar que totes les millores s’han implementat amb èxit.

Monitoring switch-type sensors and powering autonomous sensors via inductive coupling: application to removable seats in vehicles

Aquesta tesi explora la possibilitat de fer servir enllaços inductius per a una aplicació de l’automòbil on el cablejat entre la centraleta (ECU) i els sensors o detectors és difícil o impossible. S’han proposat dos mètodes: 1) el monitoratge de sensors commutats (dos possibles estats) via acoblament inductiu i 2) la transmissió mitjançant el mateix principi físic de la potència necessària per alimentar els sensors autònoms remots. La detecció d'ocupació i del cinturó de seguretat per a seients desmuntables pot ser implementada amb sistemes sense fils passius basats en circuits ressonants de tipus LC on l'estat dels sensors determina el valor del condensador i, per tant, la freqüència de ressonància. Els canvis en la freqüència són detectats per una bobina situada en el terra del vehicle. S’ha conseguit provar el sistema en un marge entre 0.5 cm i 3 cm. Els experiments s’han dut a terme fent servir un analitzador d’impedàncies connectat a una bobina primària i sensors comercials connectats a un circuit remot. La segona proposta consisteix en transmetre remotament la potència des d’una bobina situada en el terra del vehicle cap a un dispositiu autònom situat en el seient. Aquest dispositiu monitorarà l'estat dels detectors (d'ocupació i de cinturó) i transmetrà les dades mitjançant un transceptor comercial de radiofreqüència o pel mateix enllaç inductiu. S’han avaluat les bobines necessàries per a una freqüència de treball inferior a 150 kHz i s’ha estudiat quin és el regulador de tensió més apropiat per tal d’aconseguir una eficiència global màxima. Quatre tipus de reguladors de tensió s’han analitzat i comparat des del punt de vista de l’eficiència de potència. Els reguladors de tensió de tipus lineal shunt proporcionen una eficiència de potència millor que les altres alternatives, els lineals sèrie i els commutats buck o boost. Les eficiències aconseguides han estat al voltant del 40%, 25% i 10% per les bobines a distàncies 1cm, 1.5cm, i 2cm. Les proves experimentals han mostrat que els sensors autònoms han estat correctament alimentats fins a distàncies de 2.5cm.

Optimal management of microgrids

Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.. Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.

Prevalence and Distribution of Young Driver Distraction Errors in Naturalistic Driving, TPF-5(207), 2014

Naturalistic driving studies are the latest resource for gathering data associated with driver behavior. The University of Iowa has been studying teen driving using naturalistic methods since 2006. By instrumenting teen drivers’ vehicles with event-triggered video recorders (ETVR), we are able to record a 12-second video clip every time a vehicle exceeds a pre-set g-force threshold. Each of these video clips contains valuable data regarding the frequency and types of distractions present in vehicles driven by today’s young drivers. The 16-year old drivers who participated in the study had a distraction present in nearly half of the events that were captured. While a lot of attention has been given to the distractions associated with technology in the vehicle (cell phones, navigation devices, entertainment systems, etc.), the most frequent type of distraction coded was the presence of teen passengers engaging in conversation (45%). Cognitive distractions, such as singing along with the radio, were the second most common distraction. Cell phone use was the third most common distraction, detected in only 10% of the events containing distraction.

Enhancing Motorcycle Conspicuity Awareness in Iowa, 2010

Previous studies in the United States and internationally suggest that low motorcycle conspicuity, or the inability of the motorcyclist to be seen by other road users, is thought to be an important factor associated with risk of motorcycle crashes. However, there has been limited research on motorcycle conspicuity in the United States in the past two decades, while at the same time; there has been a renewed interest from states in increasing motorcycle conspicuity and motorist awareness. As such, this research revisits the motorcycle conspicuity problem by analysis of helmet-use and motorcycle crash data. First, this study reviews previous studies on motorcycle conspicuity with a focus on the effectiveness of proposed measures for enhancing motorcycle conspicuity. The major trends in motorcycle helmet use by time of day and road type for motorcyclists, as indicated from three roadside observational roadside surveys in Iowa, are also discussed. Then, using motorcycle crash data for Iowa from 2001 to 2008, this research compares single-and two-vehicle motorcycle crashes and examines the distribution of conspicuity related factors in light and dark conditions in two-vehicle crashes that could potentially relate to a collision between a motorcycle and another vehicle. The limitations of examining motorcycle conspicuity by analysis of crash data are also discussed. Finally, this report outlines recommendations based on the key findings of the study.

El vehicle elèctric: té problemes de comunicació?

Something on the level of pure electric vehicle communication is failing. If the benefits are so obvious: reducing emissions, existing technology, etc., why not EV, start to lead the global sales? Whose interests may be behind it?

Sähköautojen pikalatauksen verkkovaikutukset

Euroopan unionin energiapolitiikka on luonut paineen parantaa energiatehokkuutta kaikilla energiankäytön aloilla. Merkittävä osa energiasta kulutetaan liikenteessä, joten sähköautojen käyttöönotolla voidaan parantaa energiatehokkuutta merkittävästi. Tämän vuoksi on tarkasteltava sähköautojen laajamittaisen levinneisyyden aiheuttamia vaikutuksia sähköverkolle. Tässä diplomityössä tarkastellaan sähköautojen pikalatauksen verkkovaikutuksia. Tarkastelu painottuu kotilatauksen tarkasteluun taajamissa ja maaseudulla. Kuormituksen kasvu simuloidaan hyödyntäen sähköauton lataukselle laskettua kuormituskäyrää, jonka laskenta perustuu keskimääräiseen henkilöauton liikkumiseen, joka on saatavilla Suomen henkilöliikennetutkimuksesta. Simuloinnin tulosten perusteella sähköauton pikalatauksen verkkovaikutukset ovat merkittäviä keskijänniteverkossa ja pienjänniteverkossa. Suuremmat vaikutukset kohdistuvat pienjänniteverkkoon.

Sähkö- ja hybridiautojen voimansiirtojärjestelmien jännitetasot

Kasvihuonekaasu- ja hiilidioksidipäästöt ovat kasvaneet viimeisten vuosikymmenten aikana merkittävästi. Merkittävimpiä päästöjen lähteitä ovat liikenteessä ja energiantuotannossa käytetyt fossiiliset polttoaineet. Kaikista maailman kasvihuonepäästöistä liikenne aiheuttaa noin 13 %, josta yli 80 % on tieliikenteen aiheuttamia päästöjä. Jotta tieliikenteen ai-heuttamia päästöjä saataisiin vähennettyä on tieliikenteeseen kehitettävä yhä vähäpäästöisempiä ja päästöttömiä kulkuvälineitä. Tämä on ollut yksi päätekijä sähkö- ja hybridiautojen kehitykseen. Tässä kandidaatintyössä selvitetään sähkö- ja hybridiautoissa käytettyjä jännitetasoja sekä voimansiirtojärjestelmissä käytettyjä komponentteja. Työ rajoittuu ainoastaan henkilöautoihin, joista tarkastelun kohteena ovat sähkö-, hybridi- ja muunnossähköautot. Työssä tarkastellaan myös sähkö- ja hybridiautojen tulevaisuuden näkymiä turvallisuuden ja standardoinnin kannalta. Työssä esitettyjen tietojen perusteella saadaan selkeä näkemys siitä, miten käytetyt jännitetasot ja komponentit vaihtelevat eri autovalmistajien kesken. Korkeammat jännitetasot ovat energiatehokkuuden kannalta parempia, mutta aiheuttavat vaatimuksia käyttöturvallisuuteen liittyvissä kysymyksissä.