Demand Response Programs Design and Use Considering Intensive Penetration of Distributed Generation

Further improvements in demand response programs implementation are needed in order to take full advantage of this resource, namely for the participation in energy and reserve market products, requiring adequate aggregation and remuneration of small size resources. The present paper focuses on SPIDER, a demand response simulation that has been improved in order to simulate demand response, including realistic power system simulation. For illustration of the simulator’s capabilities, the present paper is proposes a methodology focusing on the aggregation of consumers and generators, providing adequate tolls for the demand response program’s adoption by evolved players. The methodology proposed in the present paper focuses on a Virtual Power Player that manages and aggregates the available demand response and distributed generation resources in order to satisfy the required electrical energy demand and reserve. The aggregation of resources is addressed by the use of clustering algorithms, and operation costs for the VPP are minimized. The presented case study is based on a set of 32 consumers and 66 distributed generation units, running on 180 distinct operation scenarios.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

A multiagent based shop floor transportation system simulator

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Quality management for education (second level schools)

Quality Management is a well-developed and widely used approach within industry to gain competitive edge and increased market share. It is a new management approach for schools who are now applying it without having the culture or experience of its evolution. Industrially based Quality management systems and excellence models have been developed. These excellence models and frameworks are based on the principles and concepts of TQM which are recognised as essential elements of high performing organisations. Schools are complex social institutions that provide a service. Like any other service industry, the customers of education are expecting and demanding a better service or else they will go elsewhere. Schools are beginning to reform and change to adapt to such demands. This has been reflected in Ireland in the Education Act, 1998. It is now the right time to develop a quality management system specifically for schools. The existing industrial excellence models have been modified for use in the private and public sector and some have been specifically tailored for education. The problem with such models is that they are still too sophisticated and the language still too industrial for schools. This Thesis develops and Excellence Model for Second Level Schools and provides guidance and school specific tools for its implementation.

Analyzing the effects of transient faults into applications

As computer chips implementation technologies evolve to obtain more performance, those computer chips are using smaller components, with bigger density of transistors and working with lower power voltages. All these factors turn the computer chips less robust and increase the probability of a transient fault. Transient faults may occur once and never more happen the same way in a computer system lifetime. There are distinct consequences when a transient fault occurs: the operating system might abort the execution if the change produced by the fault is detected by bad behavior of the application, but the biggest risk is that the fault produces an undetected data corruption that modifies the application final result without warnings (for example a bit flip in some crucial data). With the objective of researching transient faults in computer system’s processor registers and memory we have developed an extension of HP’s and AMD joint full system simulation environment, named COTSon. This extension allows the injection of faults that change a single bit in processor registers and memory of the simulated computer. The developed fault injection system makes it possible to: evaluate the effects of single bit flip transient faults in an application, analyze an application robustness against single bit flip transient faults and validate fault detection mechanism and strategies.

School Choice and Student Screening in the Chilean Educational System: Who Chooses Whom?. The Case of the Catholic Education

The student´s screening made by schools corresponds to a regulatory mechanism for school inclusion and exclusion that normally overlaps the parental expectations of school choice. Based in "Parents survey 2006" data (n=188.073) generated by the Chilean Educational Ministry, this paper describe the parents reasons for choosing their children's school, and school´s criteria for screening students. It concludes that the catholic schools are the most selective institutions and usually exceed the capacity of parental choice. One of the reasons to select students would be the direct relationship between this practice and increasing the average score on the test of the Chilean Educational Quality Measurement System (SIMCE).

Hematopoietic stem cell transplantation in Switzerland: a comprehensive quality control report on centre effect.

Interest groups advocate centre-specific outcome data as a useful tool for patients in choosing a hospital for their treatment and for decision-making by politicians and the insurance industry. Haematopoietic stem cell transplantation (HSCT) requires significant infrastructure and represents a cost-intensive procedure. It therefore qualifies as a prime target for such a policy. We made use of the comprehensive database of the Swiss Blood Stem Cells Transplant Group (SBST) to evaluate potential use of mortality rates. Nine institutions reported a total of 4717 HSCT - 1427 allogeneic (30.3%), 3290 autologous (69.7%) - in 3808 patients between the years 1997 and 2008. Data were analysed for survival- and transplantation-related mortality (TRM) at day 100 and at 5 years. The data showed marked and significant differences between centres in unadjusted analyses. These differences were absent or marginal when the results were adjusted for disease, year of transplant and the EBMT risk score (a score incorporating patient age, disease stage, time interval between diagnosis and transplantation, and, for allogeneic transplants, donor type and donor-recipient gender combination) in a multivariable analysis. These data indicate comparable quality among centres in Switzerland. They show that comparison of crude centre-specific outcome data without adjustment for the patient mix may be misleading. Mandatory data collection and systematic review of all cases within a comprehensive quality management system might, in contrast, serve as a model to ascertain the quality of other cost-intensive therapies in Switzerland.

Taajuusmuuttajan häviöidensimulointityökalun kehitys

Diplomityössä on kehitetty kaksitasoisen jännitevälipiirillisen taajuusmuuttajan häviöiden simulointiin käytettävä simulointimalli osaksi säädettävän sähkömoottorikäytön simulointityökalua, jolla voidaan analysoida eri säätöalgoritmien, kuormituksen ja kytkentätaajuuden vaikutusta taajuusmuuttajan häviöihin. Aluksi on selvitetty yksityiskohtaisesti taajuusmuuttajan häviölähteet ja häviöiden fysikaalinen tausta. Taajuusmuuttajassa käytettäville komponenteille on esitetty simulointimalleja. Taajuusmuuttajan malli ja häviöiden laskenta-algoritmit on toteutettu C-kielellä. Taajuusmuuttajan malli vastaa perusrakenteeltaan ACS800-02-0260-5 - taajuusmuuttajaa. ACS800-02-0260-5 -taajuusmuuttajan häviöitä on simuloitu erilaisissa kuormitustilanteissa, ja simulointien tueksi taajuusmuuttajan häviöt on pyritty selvittämään laboratoriomittauksin.

Sähkön omatuotannon kannattavuustarkastelu

Tässä diplomityössä tutkitaan sähkön omatuotannon kannattavuutta M-realin Simpeleen tehtaiden voimalaitoksella. Erityisesti työssä arvioidaan lauhdesähköntuotannon kannattavuutta polttoaine- ja päästökustannuksista muodostuvien marginaalikustannusten osalta. Koska voimalaitoksen rakennusaste on varsin alhainen,sähköntuotannon kannattavuutta on tarkasteltu arvioimalla sähkön ja lämmön yhteistuotannon kustannuksia ja jakamalla syntyneet kustannukset suhdemenetelmän avulla eri tuotteille. Diplomityössä etsitään kustannustehokkain seospolttosuhde annettujen reunaehtojen puitteissa muodostamalla polttoaineista aiheutuvista kustannuksista laskentamalli, jota optimoidaan Microsoft Excelin Solver-toiminnolla. Lauhdesähköntuotannon marginaalikustannuksia verrataan Nord Poolin SPOT-tuntihintaan. Lauhdesähköntuotanto voimalaitoksella on kannattavaa, mikäli SPOT-tuntihinnan vuorokautinen keskiarvo ylittää lauhdesähköntuotannon marginaalikustannukset.

A Semantic wiki for quality management in software development projects

Quality management has become a strategic issue for organisations and is very valuable to produce quality software. However, quality management systems (QMS) are not easy to implement and maintain. The authors' experience shows the benefits of developing a QMS by first formalising it using semantic web ontologies and then putting them into practice through a semantic wiki. The QMS ontology that has been developed captures the core concepts of a traditional QMS and combines them with concepts coming from the MPIu'a development process model, which is geared towards obtaining usable and accessible software products. Then, the ontology semantics is directly put into play by a semantics-aware tool, the Semantic MediaWiki. The developed QMS tool is being used for 2 years by the GRIHO research group, where it has manages almost 50 software development projects taking into account the quality management issues. It has also been externally audited by a quality certification organisation. Its users are very satisfied with their daily work with the tool, which manages all the documents created during project development and also allows them to collaborate, thanks to the wiki features.

Kerrostumien muodostumisen määritys sondin lämmönsiirron perusteella

Diplomityön tavoitteena oli tutkia kerrostumien muodostumista voimalaitoskattiloiden lämpöpinnoille ja niiden vaikutusta lämmönsiirtoon. Kerrostumien vaikutusta lämpöpintojen lämpötiloihin tutkittiin kerrostumasondin avulla kierto- ja kerrosleijukattiloissa. Saadun mittausaineiston muodostettiin mittaustilannetta vastaava laskentamalli, jonka avulla pystytään selvittämään voimalaitoksen lämpöpintojen likaantumista käyttöperiodin aikana. Työn alussa tarkasteltiin kerrostumien muodostumismekanismeja lämmönsiirtopinnoille, kerrostumien ominaisuuksia ja virtausympäristön vaikutusta lämmönsiirtoon. Poltossa syntyvä tuhka kiinnittyy eri mekanismeilla kattilan seinille ja lämpöpinnoille riippuen polttoaineesta ja ympäröivistä olosuhteista. Likakerrosten muodostuminen lämmönsiirtimen pinnalle pienentää putkeen siirtyvää lämpövirtaa ja alentaa kattilan hyötysuhdetta. Kerrostumien lämmönjohtumisesta ja mikrorakenteesta on hyvin vähän kokeellisen tietoa, mikä vaikeuttaa reaalisten mallien muodostamista kattilan käyttäytymisestä sen likaantuessa.Työn kokeellisessa osassa tarkasteltiin kahdella eri kattilalla tehtyjä mittauksia. Mittaukset tehtiin kerrostumasondilla, jonka lämmönsiirrosta luotiin laskentamalli SIMULINK-simulointiohjelmalla. Mittaustuloksina saatiin kolmen eri pinnan lämpötilat, jotka muuttuivat kerrostuman ja jäähdytyksen vaikutuksesta. Laskentamallista muokattiin mittaustilanteita vastaava, jolloin lämpötilamuutoksista nähdään likakerroksen ominaisuuksien vaikutus lämmönsiirtoon. Sondista muodostettiin myös FLUENT-malli, jolla tarkasteltiin yksittäisen putken virtauskenttää sekä kahden lähekkäin olevan putken vaikutusta virtaukseen.

Viilukuivurin suunnittelu kuivaustehon ja -laadun parantamiseksi

Työn tarkoitus tutkia viilukuivurin ilmankiertoa. Tietojen pohjalta suunnitellaan alustava 6-kerroskuivuri. Lisäksi diplomityössä tutkitaan erilaisten kuivausparametrien vaikutusta kuivaustapahtumaan. Viilunkuivauksessa on tärkeää tasainen kuivaustulos. Kuivaustapahtumaan vaikuttavat monet parametrit, joista yksi tärkeimmistä on kuivausilman nopeus suuttimissa. Kun viilukuivurin kuivausilman kierto on tasapainossa, saadaan kuivurin jokaisen kerroksen suutinnopeus yhtäläiseksi. Työ tarkastelee kuivurin kennon eri osien: puhaltimen, patterin, kanavien ja suutinlaatikoiden vaikutusta kuivausilman virtaamiin. Tietojen perusteella on tarkoitus optimoida kuivausolosuhteet kennon eri osissa. Teorian lisäksi työssä on tarkasteltu erilaisten virtausmallien avulla kuivausilman kiertoa kennossa. Eri kuivausparametrien vaikutusta on tutkittu viilun kuivumista simuloivalla ohjelmalla. Kuivurin konstruktion kuormituskestävyyttä on arvioitu FEM-malleilla. Lopputuloksena on saatu alustava malli VTS6x6200 kuivurille.

Impact of quality improvement tools on the performance of firms using different quality management systems

This study compares the impact of quality management tools on the performance of organisations utilising the ISO 9001:2000 standard as a basis for a quality-management system band those utilising the EFQM model for this purpose. A survey is conducted among 107 experienced and independent quality-management assessors. The study finds that organisations with qualitymanagement systems based on the ISO 9001:2000 standard tend to use general-purpose qualitative tools, and that these do have a relatively positive impact on their general performance. In contrast, organisations adopting the EFQM model tend to use more specialised quantitative tools, which produce significant improvements in specific aspects of their performance. The findings of the study will enable organisations to choose the most effective quality-improvement tools for their particular quality strategy

Kalman Filtering in Online Paper Quality Assessment

Controlling the quality variables (such as basis weight, moisture etc.) is a vital part of making top quality paper or board. In this thesis, an advanced data assimilation tool is applied to the quality control system (QCS) of a paper or board machine. The functionality of the QCS is based on quality observations that are measured with a traversing scanner making a zigzag path. The basic idea is the following: The measured quality variable has to be separated into its machine direction (MD) and cross direction (CD) variations due to the fact that the QCS works separately in MD and CD. Traditionally this is done simply by assuming one scan of the zigzag path to be the CD profile and its mean value to be one point of the MD trend. In this thesis, a more advanced method is introduced. The fundamental idea is to use the signals’ frequency components to represent the variation in both CD and MD. To be able to get to the frequency domain, the Fourier transform is utilized. The frequency domain, that is, the Fourier components are then used as a state vector in a Kalman filter. The Kalman filter is a widely used data assimilation tool to combine noisy observations with a model. The observations here refer to the quality measurements and the model to the Fourier frequency components. By implementing the two dimensional Fourier transform into the Kalman filter, we get an advanced tool for the separation of CD and MD components in total variation or, to be more general, for data assimilation. A piece of a paper roll is analyzed and this tool is applied to model the dataset. As a result, it is clear that the Kalman filter algorithm is able to reconstruct the main features of the dataset from a zigzag path. Although the results are made with a very short sample of paper roll, it seems that this method has great potential to be used later on as a part of the quality control system.

Groupware and Workflow Tools - A Case study of SAP Business Workflow Supporting System Integration in a Global Telecommunication Company

Workflow management systems aim at the controlled execution of complex application processes in distributed and heterogeneous environments. These systems will shape the structure of information systems in business and non-business environments. E business and system integration is a fertile soil for WF and groupware tools. This thesis aims to study WF and groupware tools in order to gather in house knowledge of WF to better utilize WF solutions in future, and to focus on SAP Business Workflow in order to find a global solution for Application Link Enabling support for system integration. Piloting this solution in Nokia collects the experience of SAP R/3 WF tool for other development projects in future. The literary part of this study will guide to the world of business process automation providing a general description of the history, use and potentials of WF & groupware software. The empirical part of this study begins with the background of the case study describing the IT environment initiating the case by introducing SAP R/3 in Nokia, the communication technique in use and WF tool. Case study is focused in one solution with SAP Business Workflow. This study provides a concept to monitor communication between ERP systems and to increase the quality of system integration. Case study describes a way create support model for ALE/EDI interfaces. Support model includes monitoring organization and the workflow processes to solve the most common IDoc related errors.