Effect of gibberellic acid and the biostimulant stimulate® on the initial growth of tamarind

Plant growth regulators and biostimulants have been used as an agronomic technique to optimize the production of seedlings in various crops. This study aimed to evaluate the influence of gibberellic acid and the biostimulant Stimulate® on the initial growth of tamarind (Tamarindus indica L.). The experiments were conducted in a nursery with 50% shading, in a randomized block design with five replications and five plants per plot. Thirty eight days after sowing, the leaves were sprayed seven times a day with 0.0 (control), 0.8, 1.6, 2.4 and 3.2 mL of gibberellic acid L-1 aqueous solution and with 0.0 (control), 6.0,12.0, 18.0, and 24.0 mL Stimulate® L-1 aqueous solution. Stem diameter (SD), plant height (PH), longest root length (LRL), shoot dry mass (SDM), root dry mass (RDM) and RDM:SDM ratio were evaluated ninety days after sowing. Variance and regression analysis showed that GA3 at 4% promoted plant growth (height), but had no significant effect on stem diameter, longest root length, shoot and root dry mass and the RDM:SDM ratio. On the other hand, all concentrations of Stimulate® significantly increased plant height and shoot and root dry mass of tamarind seedlings.

Järeiden puutuotteiden erikoiskuivaus

Tutkimuksessa selvitettiin kuumakuivauksen vaikutusta hirsiraaka-aineen ominaisuuksiin, käyttökelpoisia kuivauskaavoja sekä lämpötilatasoja. Kokeissa kuivattiin kuorittuja pyöreitä mäntytukkeja 130-180° C:n maksimilämpötilassa, sekä pelkaksi sahattuja hirsiaihioita 115-140° C:n maksimilämpötilassa. Kuivauksissa pyrittiin mahdollisimman lyhyeen aikaan laadun siitä kuitenkaan kärsimättä. Laadussa kiinnitettiin erityisesti huomiota sisä- ja pintahalkeamiin sekä värimuutoksiin. Korkeita lämpötiloja käytettäessä kuivausaika oli huomattavasti nopeampi kuin lämminilmakuivauksessa. Koekuivaukset kestivät 1-4 vuorokautta, kun vastaavaa puutavaraan lämminilmakuivaus kestää 7-20 vuorokautta. Korkeimmilla lämpötiloilla suoritetuissa kokeissa koekappaleisiin muodostui paljon pieniä halkeamia kun taas alhaisemmilla lämpötiloilla halkeamien kappalemäärä väheni, mutta lähes joka kappaleessa oli vähintään yksi suuri (yli 5 mm leveä) halkeama. Sisähalkeamien määrä oli pyöreillä tukeilla suoritetuissa kokeissa kohtuullisen pieni. Pelkaksi sahatuilla aihioilla sitä vastoin sisähalkeamien määrä oli huomattavasti suurempi. Vain 100 mm x 175 mm aihioilla onnistuttiin yhdessä kuivauksessa pitämään sisähalkeaminen pienenä. Kuumakuivaus aiheuttaa väistämättä värimuutoksia puuhun. Mitä korkeammilla lämpötiloilla ja pidemmillä kaavoilla kuivataan sitä enemmän väri tummenee. Värin vaikutus lopputuotteessa riippuu kuitenkin käyttökohteesta ja asiakkaan mieltymyksistä. Tutkimuksen perusteella varsinkin pyöreiden tukkien kuumakuivaus näyttää onnistuvan laadul-lisesti hyvin ja huomattavasti lämminilmakuivausta nopeammin. Pelkaksi sahattujen hirsiaihioiden kuivauksessa prosessin hallinta havaittiin vaikeaksi ja toimivien kaavojen kehittäminen vaatii jatkotutkimuksia.

Cooperative games with size-truncated information

[Eng] We study the marginal worth vectors and their convex hull, the socalled Weber set, from the original coalitional game and the transformed one, which is called the Weber set of level k. We prove that the core of the original game is included in each of the Weber set of level k, for any k, and that the Weber sets of consecutive levels form a chain if and only if the original game is 0-monotone. Even if the game is not 0-monotone, the intersection of the Weber sets for consecutive levels is always not empty, what is not the case for non-consecutive ones. Spanish education system.

Cooperative games with size-truncated information

[Eng] We study the marginal worth vectors and their convex hull, the socalled Weber set, from the original coalitional game and the transformed one, which is called the Weber set of level k. We prove that the core of the original game is included in each of the Weber set of level k, for any k, and that the Weber sets of consecutive levels form a chain if and only if the original game is 0-monotone. Even if the game is not 0-monotone, the intersection of the Weber sets for consecutive levels is always not empty, what is not the case for non-consecutive ones. Spanish education system.

Tunnusluku- ja tuottohistoria-pohjaisten sijoitusstrategioiden toimivuus ja sykliriippuvuus suomalaisilla osakemarkkinoilla

Tutkielman tavoitteena oli analysoida tunnuslukuihin ja tuottohistoriaan perustuvien sijoitusstrategioiden toimivuutta ja sykliriippuvuutta HEX:iin listatuista yrityksistä koostuvalla aineistolla. Tutkitut sijoitusstrategiat perustuivat arvostuskertoimien, betan ja menneiden tuottojen käyttöön analysointivälineinä käytettyjen kvintiiliportfolioiden muodostamiskriteereinä. Kontribuutiota tutkimukseen pyrittiin luomaan tarkastelemalla ensimmäistä kertaa suhdannesyklin vaikutuksia edellä mainittujen sijoitusstrategioiden toimivuuteen tutkimusaineistolla, joka kattoi useita suhdannesyklejä (pisimmillään vuodet 1991 - 2002). Suhdannesyklien käänteiden määrittämiseen käytettiin ostopäälliköiden indeksiä (PMI-indeksi), jonka on todettu toimivan hyvin esimerkiksi pörssikurssien kehitystä ennakoivana indikaattorina. Tulokset osoittivat P/E-, P/B-, EV/EBIT-, EV/EBITDA-, beta- ja momentumanomalioiden esiintyneen myös suomalaisilla osakemarkkinoilla vuosina 1991 – 2002. Tutkimuksessa saatiin näyttöä myös tuottohistoriaan pohjautuvien momentum-strategian ja winner-loser –strategian toimivuudesta. Näistä etenkin jälkimmäinen oli voimakkaasti sykliriippuvaista. Näiden tulosten mukaan suomalaiset osakemarkkinat eivät olisi käytetyillä tarkasteluperiodilla olleet edes heikosti tehokkaat, ts. osakemarkkinoiden keskimääräinen tuottotaso olisi ollut mahdollista ylittää pelkkään kurssihistoriaan perustuvien sijoitusstrategioiden avulla.

Particle shape and orientation in laser diffraction and static image analysis size distribution analysis of micrometer sized rectangular particles

Laser diffraction (LD) and static image analysis (SIA) of rectangular particles [United States Pharmacopeia, USP30-NF25, General Chapter <776>, Optical Miroscopy.] have been systematically studied. To rule out sample dispersion and particle orientation as the root cause of differences in size distribution profiles, we immobilize powder samples on a glass plate by means of a dry disperser. For a defined region of the glass plate, we measure the diffraction pattern as induced by the dispersed particles, and the 2D dimensions of the individual particles using LD and optical microscopy, respectively. We demonstrate a correlation between LD and SIA, with the scattering intensity of the individual particles as the dominant factor. In theory, the scattering intensity is related to the square of the projected area of both spherical and rectangular particles. In traditional LD the size distribution profile is dominated by the maximum projected area of the particles (A). The diffraction diameters of a rectangular particle with length L and breadth B as measured by the LD instrument approximately correspond to spheres of diameter ØL and ØB respectively. Differences in the scattering intensity between spherical and rectangular particles suggest that the contribution made to the overall LD volume probability distribution by each rectangular particle is proportional to A2/L and A2/B. Accordingly, for rectangular particles the scattering intensity weighted diffraction diameter (SIWDD) explains an overestimation of their shortest dimension and an underestimation of their longest dimension. This study analyzes various samples of particles whose length ranges from approximately 10 to 1000 μm. The correlation we demonstrate between LD and SIA can be used to improve validation of LD methods based on SIA data for a variety of pharmaceutical powders all with a different rectangular particle size and shape.

Myynnin raportoinnin kehittäminen kassajärjestelmähankkeen yhteydessä

Raportointi liittyy kiinteänä osana yrityksen jokapäiväiseen toimintaan. Raportoinnin sisältö ja muoto vaihtelevat organisaatiotasosta riippuen päivittäisen toiminnan tarkkailusta kuukausittaiseen tulosraportointiin. Raportointi voidaan toteuttaa operatiivisten järjestelmien kautta tai nykyisin entistä suositumpana vaihtoehtona on keskitetty raportointi. Uuden raportointijärjestelmän hankintaprojekti on usein koko yritystä koskeva investointi. Jos raportointijärjestelmällä on tarkoitus raportoida sekä operatiivista toimintaa että johdon tarpeita, on sen mukauduttava moneen tarkoitukseen. Aluksi on tärkeää määritellä tietotarpeet ja tavoitteet projektille unohtamatta riskien- ja projektinhallintaa sekä investointilaskelmia. Jos raportoidaan myös yrityksen ulkopuolelle, tulee ottaa huomioon mahdolliset säädökset sekä tietoturvallisuusnäkökulmat. Myös yrityksen toimintatapoja ja – prosesseja on syytä tarkastella kriittisesti ennen järjestelmähankintaa jolloin voidaan havaita uusia raportointikohteita, tai toimintatapoja voidaan uudelleen organisoida parhaan toimintatavan saavuttamiseksi. Raportointijärjestelmää hankittaessa turvaudutaan usein ulkopuoliseen ohjelmistotoimittajaan, joka integroi ja räätälöi järjestelmän yrityksen omiin tarpeisiin soveltuvaksi. Raportointijärjestelmän hankintaprojekti ei lopu käyttöönottoon vaan projektin alussa on huomioitava myös järjestelmän huomattavasti pisin elinkaari eli käyttö ja ylläpito. Raportointi-, kuten ei moni muukaan tietojärjestelmä, ole ikinä valmis sillä tarpeet ja toimintatavat muuttuvat ajan kuluessa ja käyttäjien tietoisuus lisääntyy.

Physiologie et biomécanique du ski-alpinisme

Introduction: Ski mountaineering is an increasingly popular winter sport and leisure activity. Elite athletes practice this sport with a high level of professionalism, but so far little scientific evidence was available to support their approach. The main aim of this work was to develop a specific knowledge about ski mountaineering, allowing providing specific recommendations for the practice. Methods: First we investigated energy cost (EC) and vertical energy cost (ECv). These two parameters were estimated with oxygen uptake, at different gradients (7 to 33%) and different speeds (2 to 7 km·∙h-­‐1) on treadmill with roller skis and on snow with ski mountaineering gear. Then we assessed energy expenditure (EE) during a long duration ski mountaineering event by measuring heart rate and altitude all along the race and associating them with an EE. The EE was compared with the energy intake during the race. Hydration level was estimated by comparing body weight immediately before and after the race. The energy intake during the 4 days preceding the race was estimated with food diaries and compared with the guidelines. Results/discussion: EC and ECv of ski mountaineering were very high and varied with gradient and speed. ECv decreased between 7 and 33% and with increasing speed at steep gradients. For a 5 h 51 ± 53 min race, the mean EE was 22.6 ± 2.6 MJ. The energy intake covered 20 ± 7% of the EE and was about 14% lower than the recommendations. No significant dehydration was observed. For the longest (53 km) race, we can extrapolate the EE as about 40 MJ. Before the race the energy intake and especially the carbohydrate intake were far under the guidelines (83 ± 17% and 46 ± 13% of the recommendations). Conclusions: EC and EE of ski mountaineering are very high. To minimize the EE to reach the top of a mountain and optimize the performance, the skier should choose a steep gradient and combine this steep gradient with a fast speed. The CHO intake should be increased during but, also before the race while the fluid intake seemed to be adequate. -- Introduction : Le ski-­‐alpinisme est un sport d'hiver qui s'est particulièrement développé durant les dernières décennies : de plus en plus de personnes pratiquent cette activité dans un cadre de loisirs et de plus en plus d'athlètes d'élite prennent part à des compétitions qu'ils préparent avec un haut degré de professionnalisme. Cependant, les connaissances scientifiques restent limitées et les athlètes ne disposent pas de recommandations précises et spécifiques. Le but principal de ce travail est donc de développer un savoir spécifique sur le ski-­‐alpinisme, ce qui devrait permettre d'établir des recommandations pour la pratique. Méthode : Le coût énergétique (CE) et le coût énergétique vertical (CEv) du ski-­‐alpinisme ont été calculés en mesurant la consommation d'oxygène à différentes pentes (7 à 33%) et vitesses (2 à 6.8 km·∙h-­‐1) sur tapis roulant avec des skis à roulettes et sur le terrain avec des skis de randonnée. Ensuite, la dépense énergétique (DE) d'une course de ski-­‐alpinisme de longue durée a été évaluée en mesurant la fréquence cardiaque et l'altitude en continu. La DE a été comparée à l'énergie consommée par les ravitaillements. Des carnets alimentaires ont permis d'estimer la consommation d'énergie (boissons et nourriture) pendant les 4 jours précédant la course. Résultats/discussion : Le CE du ski-­‐alpinisme est très élevé. Le CEv diminue entre 2 et 6 km·∙h-­‐1 et entre 7 et 33%. Pour une course de 5 h 51 ± 53 min (26 km), la DE était de 22.6 ± 2.6 MJ, alors que, pour le grand parcours de la Patrouille des Glaciers (53 km), elle serait d'environ 40 MJ. La consommation d'énergie, pendant le parcours de 26 km, couvrait 20 ± 7% de la DE et était inférieure de 14% aux recommandations, alors qu'aucune déshydratation significative n'était constatée. Les jours précédant la course, la consommation d'énergie et surtout d'hydrates de carbone était bien inférieure aux quantités recommandées (83 ± 17% et 46 ± 13% des recommandations). Conclusion : Le CE et la DE étaient très élevés. Pour minimiser la dépense lors d'une ascension, il faut combiner pente et vitesse élevées. La consommation d'hydrates de carbone devrait être massivement augmentée avant et pendant la course, alors que l'hydratation semble adéquate.

Stabilization of the ionic form of weak acid cation exchange resins

Weak acid cation exchange (WAC) resins are used in the chromatographic separation of betaine from vinasse, a by-product of sugar industry. The ionic form of the resin determines the elution time of betaine. When a WAC-resin is in hydrogen form, the retention time of betaine is the longest and betaine elutes as the last component of vi-nasse from the chromatographic column. If the feed solution contains salts and its pH is not acidic enough to keep the resin undissociated, the ionic form of the hydrogen form resin starts to alter. Vinasse contains salts and its pH is around 5, it also contains weak acids. To keep the metal ion content (Na/H ratio) of the resin low enough to ensure successful separation of betaine, acid has to be added to either eluent (water) or vinasse. The aim of the present work was to examine by laboratory experiments which option requires less acid. Also the retention mechanism of betaine was investigated by measuring retention volumes of acetic acid and choline in different Na/H ratios of the resin. It was found that the resulting ionic form of the resin is the same regardless of whether the regeneration acid is added to the eluent or the feed solution (vinasse). Be-sides the salt concentration and the pH of vinasse, also the concentration of weak acids in the feed affects the resulting ionic form of the resin. The more buffering capacity vinasse has, the more acid is required to keep the ionic form of the resin desired. Vinasse was found to be quite strong buffer solution, which means relatively high amounts of acid are required to prevent the Na/H ratio from increasing too much. It is known that the retention volume of betaine decreases significantly, when the Na/H ratio increases. This is assumed to occur, because the amount of hydrogen bonds between the carboxylic groups of betaine and the resin decreases. Same behavior was not found with acetic acid. Choline has the same molecular structure as betaine, but instead of carboxylic group it has hydroxide group. The retention volume of choline increased as the Na/H ratio of the resin increased, because of the ion exchange reaction between choline cation and dissociated carboxylic group of the resin. Since the retention behavior of choline on the resin is opposite to the behavior of be-taine, the strong affinity of betaine towards hydrogen form WAC-resin has to be based on its carboxylic group. It is probable that the quaternary ammonium groups also affect the behavior of the carboxylic groups of betaine, causing them to form hydrogen bonds with the carboxylic groups of the resin.

Further insights in trichothiodistrophy: a clinical, microscopic, and ultrastructural study of 20 cases and literature review

Background: Trichothiodistrophy (TTD) is a rare autosomal recessive condition that is characterized by a specific congenital hair shaft dysplasia caused by deficiency of sulfur associated with a wide spectrum of multisystem abnormalities. In this article, we study clinical, microscopic, and ultrastructural findings of 20 patients with TTD with the aim to add further insights regarding to this rare condition. Additionally, analyses of our results are compared with those extracted from the literature in order to enhance its comprehensibility. Materials and Methods: Twenty cases of TTD were included: 7 from Mexico and 14 from Spain. Clinical, microscopic, scanning electron microscopy (SEM) studies and X-ray microanalysis (XrMa) were carried out in all of them. Genetic studies were performed in all seven Mexican cases. Patients with xeroderma pigmentosum and xeroderma pigmentosum/TTD-complex were excluded. Results: Cuticular changes and longitudinal crests of the hair shaft were demonstrated. These crests were irregular, disorganized, following the hair longest axis. Hair shaft sulfur deficiency was disposed discontinuously and intermittently rather than uniformly. This severe decrease of sulfur contents was located close to the trichoschisis areas. Only five patients did not show related disturbances. Micro-dolichocephaly was observed in five cases and represented the most frequent facial dysmorphism found. It is also remarkable that all patients with urologic malformations also combined diverse neurologic disorders. Moreover, three Mexican sisters demonstrated the coexistence of scarce pubic vellus hair, developmental delay, onychodystrophy, and maxillar/mandibullar hypoplasia. Conclusions: TTD phenotype has greatly varied from very subtle forms to severe alterations such as neurologic abnormalities, blindness, lamellar ichthyosis and gonadal malformations. Herein, a multisystem study should be performed mandatorily in patients diagnosed with TTD.

Further insights in trichothiodistrophy: a clinical, microscopic, and ultrastructural study of 20 cases and literature review

Background: Trichothiodistrophy (TTD) is a rare autosomal recessive condition that is characterized by a specific congenital hair shaft dysplasia caused by deficiency of sulfur associated with a wide spectrum of multisystem abnormalities. In this article, we study clinical, microscopic, and ultrastructural findings of 20 patients with TTD with the aim to add further insights regarding to this rare condition. Additionally, analyses of our results are compared with those extracted from the literature in order to enhance its comprehensibility. Materials and Methods: Twenty cases of TTD were included: 7 from Mexico and 14 from Spain. Clinical, microscopic, scanning electron microscopy (SEM) studies and X-ray microanalysis (XrMa) were carried out in all of them. Genetic studies were performed in all seven Mexican cases. Patients with xeroderma pigmentosum and xeroderma pigmentosum/TTD-complex were excluded. Results: Cuticular changes and longitudinal crests of the hair shaft were demonstrated. These crests were irregular, disorganized, following the hair longest axis. Hair shaft sulfur deficiency was disposed discontinuously and intermittently rather than uniformly. This severe decrease of sulfur contents was located close to the trichoschisis areas. Only five patients did not show related disturbances. Micro-dolichocephaly was observed in five cases and represented the most frequent facial dysmorphism found. It is also remarkable that all patients with urologic malformations also combined diverse neurologic disorders. Moreover, three Mexican sisters demonstrated the coexistence of scarce pubic vellus hair, developmental delay, onychodystrophy, and maxillar/mandibullar hypoplasia. Conclusions: TTD phenotype has greatly varied from very subtle forms to severe alterations such as neurologic abnormalities, blindness, lamellar ichthyosis and gonadal malformations. Herein, a multisystem study should be performed mandatorily in patients diagnosed with TTD.

Biopolttoaineiden lisäämismahdollisuudet kaukolämmön tuotannossa pienen kokoluokan tuotantolaitoksissa Lahden seudulla

Tämä diplomityö on tehty IMMU-hankkeeseen, jossa selvitetään konkreettisia keinoja ilmastonmuutoksen hillintään Lahden seudulla. Diplomityössä tarkastellaan mahdollisuuksia lisätä biopolttoaineita pienen kokoluokan kaukolämmön tuotantolaitoksissa. Teoria osuuden pohjalta luodaan skenaariot Nastolaan ja Vääksyyn (Asikkala). Skenaarioissa tarkastellaan biopolttoaineiden lisäämisen vaikutuksia kasvihuonekaasu- ja hiukkaspäästöihin käyttämällä elinkaariarviointimenetelmää. Taloudellisia seikkoja tarkastellaan laskemalla takaisinmaksuaikoja eri biolaitosratkaisuille nettonykyarvomenetelmällä. Tutkimuksen tuloksena saatiin, että kasvihuonekaasupäästöt tuotannon elinkaaren ajalta vähenevät eniten tuottamalla kaukolämmön perustuotanto Nastolassa ja Vääksyssä bio-CHP-laitoksella haketta polttamalla. Kiinteitä biopolttoaineita poltettaessa tulevat kuitenkin suurimmat hiukkaspäästöt, mikä vaikuttaa asuinympäristön viihtyvyyteen tuotantolaitoksen läheisyydessä. Bio-CHP-laitoksen investointikustannukset ovat suurimmat ja takaisinmaksuaika pisin. Nastolan kulutusperusteisiä päästöjä pystytään vähentämään eniten investoimalla biolämpölaitokseen tai bio-CHP-laitokseen. Päästöjä Nastolassa pystyttäisiin kyseisillä investoinneilla vähentämään enimmillään 6,4 %. Lahti energian kokonaispäästöjä pystyttäisiin enimmillään vähentämään noin 1,6 %. Johtopäätöksenä tutkimuksesta voidaan sanoa, että kasvihuonekaasupäästöjä pystytään vähentämään investointien avulla. Toiset ratkaisut ovat vain kalliimpia kuin toiset. Lisäksi kiinteitä biopolttoaineita käytettäessä jotkut poltto-ominaisuudet voivat heiketä esim. verrattuna maakaasun polttoon. Biopolttoaineiden lisäämisellä kuitenkin päästään irti riippuvuudesta fossiilisiin polttoaineisiin kuten öljyyn ja maakaasuun. Investointeja tehdessä on vaikea sanoa suoraan, mikä vaihtoehto on paras tapa tuottaa kaukolämpöä. Investointipäätöksiä tehdessä päätökseen vaikuttaa se, mitä tuotannon ominaispiirteitä painotetaan eniten.

Identification and characterization of a Hydrangea ringspot virus isolate infecting hydrangea in São Paulo State

Hydrangea plants showing leaves with chlorotic and necrotic rings from Arujá Municipality, São Paulo State, were analyzed for the identification of the viral species. Elongated filamentous particles of 490 nm were visualized under transmission electron microscope. Oligonucleotides for Hydrangea ringspot virus (HdRSV), a potexvirus commonly found in Europe and in the United States, were tested using total RNA from hydrangea plants, amplifying two fragments, one around 550 and another one of 250 nucleotides. Nucleotide identity with HdRSV (accession number AJ 707100.1) was 96% and 88% for the longest and shortest fragment, respectively, indicating the presence of this virus. To evaluate its dissemination in the matrices of hydrangea used in the commercial production, 17 samples were collected in the region of Arujá, and eight were infected by HdRSV. For the analyzed viral replicase portion, the isolates from the varieties 'Azul LZR', 'Rosita', 'Renat Blue' and 'Vermelho Comum' did not differ in their amino acid sequences from isolates with sequences deposited in the GenBank (accession numbers AY 707100 and NC_006943). The isolates from 'Azul Rendado' and "Rosa Japonesa' showed few differences but were related to the remaining isolates. An antiserum was obtained for HdRSV and can be efficiently used to detect such virus in hydrangea and Primula malacoides, another ornamental plant also infected by HdRSV.

Working capital management in the value chain of automotive industry

The objective of this Master’s thesis is to examine working capital management in the automotive industry in years 2006-2008. The study is conducted by the analysis of financial statements. The sample consists of 65 companies that represent different stages in the value chain of automotive industry beginning from raw material suppliers and ending to car dealers. Working capital management is studied by the cash conversion cycle (CCC). The results show that the average CCC of the value chain is 67 days. Car manufacturers had the longest CCC, 106 days, whereas the CCC of oil companies was the shortest, 22 days. The findings suggest that the cycle time of working capital usually follows the cycle time of inventories, since the changes in cycle times of accounts receivable and payable compensate each other. Improvements in working capital management could be achieved by sharing more accurate information in the chain for example about inventory levels and order points of customer. It could also be discussed within the automotive industry, if the long credit periods, which tie up working capital, are really needed. New technologies enable faster payments, which would reduce the cash conversion cycles, improve the profitability of companies, and increase the competitiveness of the value chain. Working capital should not be reduced at the expense of value chain partners, because nowadays the competition is rather between the value chains than between the companies. Similar research design is applied earlier to study working capital management in the value chain of pulp and paper industry. Even if the industries and the structures of the chains differ from each other, results were surprisingly similar. In future research, working capital management in other industries’ value chains could still be studied and compared to previous studies. ICT industry, for example, could be an interesting object.

D’abord, ensuite, enfin et 0, De plus: Organisation textuelle par des séries linéaires dans les articles de recherche

The study examines the signalling of text organisation in research articles (RA) in French. The work concentrates on a particular type of organisation provided by text sequences, i.e. structures organising text to items of which at least some are signalled by markers of addition or order: First… 0… The third point… In addition… / Premièrement… 0… Le troisième point… De plus… By indicating the way the text is organised, these structures guide the reader in the reading process so that he doesn’t need to interpret the text structure himself. The aim of the work is to study factors affecting the marking of text sequences. Why is their structure sometimes signalled explicitly by markers such as secondly, whereas in other places such markers are not used? The corpus is manually XML-annotated and consists of 90 RAs (~800 000 words) in French from the fields of linguistics, education and history. The analysis highlights several factors affecting the marking of text sequences. First, exact markers (such as fist ) seem to be more frequent in sequences where all the items are explicitly signalled by a marker, whereas additive markers (such as moreover) are used in sequences with both explicitly signalled and unmarked items. The marking of explicitly signalled sequences seems thus to be precise and even repetitive, whereas the signalling of sequences with unmarked items is altogether more vague. Second, the marking of text sequences seems to depend on the length of the text. The longer the text segment, the more vague the marking. Additive markers and unmarked items are more frequent in longer sequences possibly covering several pages, whereas shorter sequences are often signalled explicitly by exact markers. Also the marker types vary according to the sequence length. Anaphoric expressions, such as first, are fairly close to their referents and are used in short sequences, connectors, such as secondly, are frequently used in sequences of intermediate length, whereas the longest sequences are often signalled by constructions composed of an ordinal and a noun acting as a subject of the sentence: The first item is… Finally, the marking of text organisation depends also on the discipline the RA belongs to. In linguistics, the marking is fairly frequent and precise; exact markers such as second are the most used, and structures with unmarked items are less common. Similarly, the marking is fairly frequent in education. In this field, however, it is also less precise than in linguistics, with frequent unmarked items and additive markers. History, on the other hand, is characterised by less frequent marking. In addition, when used, the marking in this field is also less precise and less explicit.