Myosin Va phosphorylated on ser(1650) is found in nuclear speckles and redistributes to nucleoli upon inhibition of transcription

Nuclear actin and nuclear myosins have been implicated in the regulation of geneexpression in vertebrate cells. Myosin V is a class of actin-based motor proteins involved in cytoplasmic vesicle transport and anchorage, spindle-pole alignment and mRNA translocation. In this study, myosin-Va, phosphorylated on a conserved serine in the tail domain (phospho-ser(1650) MVa), was localized to subnuclear compartments. A monoclonal antibody, 9E6, raised against a peptide corresponding to phosphoserine(1650) and flanking regions of the murine myosin Va sequence, was immunoreactive to myosin Va heavy chain in cellular and nuclear extracts of HeLa cells, PC12 cells and B16-F10 melanocytes. Immunofluorescence microscopy with this antibody revealed discrete irregular spots within the nucleoplasm that colocalized with SC35, a splicing factor that earmarks nuclear speckles. Phospho-ser(1650) MVa was not detected in other nuclear compartments, such as condensed chromatin, Cajal bodies, gems and perinucleolar caps. Although nucleoli also were not labeled by 9E6 under normal conditions, inhibition of transcription in HeLa cells by actinomycin D caused the redistribution of phospho-ser(1650) MVa to nucleoli, as well as separating a fraction of phosphoser(1650) MVa from SC35 into near-neighboring particles. These observations indicate a novel role for myosin Va in nuclear compartmentalization and offer a new lead towards the understanding of actomyosin-based gene regulation.

Evaluation of the Possibility of Removing Staining by Repolishing Composite Resins Submitted to Artificial Aging

This in vitro research verified the possibility of eliminating staining caused by coffee and red wine in five composite resins, after being submitted to thermal cycling. Thirty-six specimens were prepared and immersed in water at 37 degrees C for 24 hours. After polishing, specimen color was measured in a spectrophotometer Cintra 10 UV (Visible Spectrometer, GBC, Braeside, VIC, Australia). All specimens were submitted to thermal cycling at temperatures of 5 and 55 degrees C with a dwell time of 1 minute, for 1,000 cycles in a 75% ethanol/water solution. After thermal cycling, the specimens were immersed in water at 37 degrees C until 7 days had elapsed from the time the specimens were prepared. All specimens were then taken to the spectrophotometer for color measurement. The specimens were divided into three groups (N = 12): distilled water (control), coffee, and red wine. For the staining process to occur on only one surface, all the sides, except one, of the surfaces were isolated with white wax. The specimens were immersed in one of the solutions at 37 degrees C for 14 days. The specimens were dried and taken to the spectrophotometer for color measurement. After this, the specimens were submitted to 20 mu m wear three times, and the color was measured after each one of the wear procedures. Calculation of the color difference was made using CIEDE2000 formula. According to the methodology used in this research, it was concluded that the staining caused by coffee and red wine was superficial and one wear of 20 mu m was sufficient to remove the discoloration.

Alteration of Ca(2+)-ATPase activity in the homogenate, plasma membrane and microsomes of the salivary glands of streptozotocin-induced diabetic rats

Diabetes has been implicated in the dryness of the mouth, loss of taste sensation, sialosis, and other disorders of the oral cavity, by impairment of the salivary glands. The aim of the present study was to examine the plasma membrane, microsomal, and homogenate Ca(2+)-ATPase activity in the rat submandibular and parotid salivary glands of streptozotocin-induced diabetes. We have also examined the influence of the acidosis state oil this parameter. Diabetes was induced by an intraperitoneal injection of streptozotocin and acidosis was induced by daily injection of NH(4)Cl. At 15 and 30 days after diabetes induction, the animals were euthanized and the submandibular and parotid salivary glands were removed and analyzed. Ca(2+)-ATPase (total, independent, and dependent) was determined in the homo-enate, microsomal, and plasma membranes of the salivary glands of diabetic and control rats. Calcium concentration was also determined in the glands and showed to be hi-her in the diabetic animals. Ca(2+)-ATPase activity was found to be reduced in all cell fractions studied in the diabetic animals compared with control. Similar results were obtained for the submandibular salivary glands of acidotic animals; however in the parotid salivary glands it was found an increase in the enzyme activity. Copyright (c) 2009 John Wiley & Sons, Ltd.

Influence of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and bond strength

Statement of the Problem: Adhesive systems can spread differently onto a substrate and, consequently, influence bonding. Purpose: The purpose of this study was to evaluate the effect of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and microtensile bond strength (MTBS). Materials and Methods: Twenty-four molars were sectioned mesiodistally to expose flat buccal and lingual halves. Standardized drop volumes of adhesive systems (Single Bond [SB] and Prime & Bond 2.1 [PB2.1]) were applied to dentin according to the manufacturer`s instructions. Teeth halves were randomly divided into groups: 1A-SB/parallel to gravity; 1B-SB/perpendicular to gravity; 2A-PB2.1/parallel to gravity; and 2B-PB2.1/perpendicular to gravity. The bonded assemblies were stored in 37 degrees C distilled water for 24 hours and then sectioned to obtain dentin sticks (0.8 mm(2)). The adhesive layer thickness was determined in a light microscope (x200), and after 48 hours the specimens were subjected to MTBS test. Data were analyzed by one-way and two-way analysis of variance and Student-Newman-Keuls tests. Results: Mean values (MPa +/- SD) of MTBS were: 39.1 +/- 12.9 (1A); 32.9 +/- 12.4 (1B); 52.9 +/- 15.2 (2A); and 52.3 +/- 16.5 (2B). The adhesive systems` thicknesses (mu m +/- SD) were: 11.2 +/- 2.9 (1A); 18.1 +/- 7.3 (1B); 4.2 +/- 1.8 (2A); and 3.9 +/- 1.3 (2B). No correlation between bond strength and adhesive layer thickness for both SB and PB2.1 (r = -0.224, p = 0.112 and r = 0.099, p = 0.491, respectively) was observed. Conclusions: The differently oriented dentin surfaces and the regional variation of specimens on the adhesive layer thickness are material-dependent. These variables do not influence the adhesive systems` bond strength to dentin. CLINICAL SIGNIFICANCE Adhesive systems have different viscosities and spread differently onto a substrate, influencing the bond strength and also the adhesive layer thickness. Adhesive thickness does not influence dentin bond strength, but it may impair adequate solvent evaporation, polymer conversion, and may also determine water sorption and adhesive degradation over time. In the literature, many studies have shown that the adhesive layer is a permeable membrane and can fail over timebecause ofits continuous plasticizing and degradation when in contact with water. Therefore, avoiding thick adhesive layers may minimize these problems and provide long-term success for adhesive restorations.

Shear Bond Strength of A Sealant to Contaminated-Enamel Surface: Influence of Erbium : Yttrium-Aluminum-Garnet Laser Pretreatment

Salivary contamination is one of the factors that can disturb the sealing process and interfere in the longevity of pit and fissure sealants. Erbium : yttrium-aluminum-garnet (Er : YAG) laser could influence the bond strength of enamel and increase the acid resistance. To evaluate the influence of Er : YAG laser on the shear bond strength of a sealant to a salivary contaminated enamel surface. Twenty-four third molars had the roots sectioned 2 mm coronal to the cementoenamel junction. The crowns were mesiodistally sectioned providing 48 halves that were embedded in polyester resin. Enamel was flattened and a 2-mm diameter bonding area was demarcated. Specimens were randomly assigned to two groups according to the superficial pretreatment-37% phosphoric acid (A) and Er : YAG laser (80 mJ/2 Hz) + phosphoric acid (L), which were subdivided into two groups (N = 12), without salivary contamination (C) and with salivary contamination (SC). To contaminate the specimens, 0.25 mL of human fresh saliva was applied for 20 seconds and then dried. Fluroshield sealant was applied in all specimens. After storage, shear bond strength of samples were tested in a universal testing machine. Means in MPa were: AC-14.61 (+/- 2.52); ASC-6.66 (+/- 2.34); LC-11.91 (+/- 1.34); and LSC-2.22 (+/- 0.66). Statistical analysis revealed that surfaces without salivary contamination and with acid treatment had the highest mean (p < 0.05). The group with salivary contamination treated by Er : YAG laser followed by phosphoric acid application presented the lowest bond values (p < 0.05). The phosphoric acid etching under dry condition yielded better bonding performance. Er : YAG laser was not able to increase the effectiveness of conventional acid etching of enamel in the bond of sealants in both dry and wet conditions. Under the conditions of this study, the conventional etching protocol (phosphoric acid without salivary contamination) is still preferable to laser-conditioning enamel surface prior to sealant application.

Bleaching Agents with Varying Concentrations of Carbamide and/or Hydrogen Peroxides: Effect on Dental Microhardness and Roughness

To evaluate the effect of low and highly concentrated bleaching agents on microhardness and surface roughness of bovine enamel and root dentin. According to a randomized complete block design, 100 specimens of each substrate were assigned into five groups to be treated with bleaching agents containing carbamide peroxide (CP) at 10% (CP10); hydrogen peroxide (HP) at 7.5% (HP7.5) or 38% (HP38), or the combination of 18% of HP and 22% of CP (HP18/CP22), for 3 weeks. The control group was left untreated. Specimens were immersed in artificial saliva between bleaching treatments. Knoop surface microhardness (SMH) and average surface roughness (Ra) were measured at baseline and post-bleaching conditions. For enamel, there were differences between bleaching treatments for both SMH and Ra measurements (p = 0.4009 and p = 0.7650, respectively). SMH significantly increased (p < 0.0001), whereas Ra decreased (p = 0.0207) from baseline to post-bleaching condition. For root dentin, the group treated with CP10 exhibited the significantly highest SMH value differing from those groups bleached with HP18/CP22, HP7.5, which did not differ from each other. Application of HP38 resulted in intermediate SMH values. No significant differences were found for Ra (p = 0.5975). Comparing the baseline and post-bleaching conditions, a decrease was observed in SMH (p < 0.0001) and an increase in Ra (p = 0.0063). Bleaching agents with varying concentrations of CP and/or HP are capable of causing mineral loss in root dentin. Enamel does not perform in such bleaching agent-dependent fashion when one considers either hardness or surface roughness evaluations. Bleaching did not alter the enamel microhardness and surface roughness, but in root dentin, microhardness seems to be dependent on the bleaching agent used.

Reformas pr??-mercado, rigidez constitucional e revis??o judicial: Brasil, Argentina e Uruguai em perspectiva comparada

Este artigo aborda a import??ncia da distribui????o de poderes de agenda e de veto dos cidad??os e dos Poderes Executivo, Legislativo e Judici??rio para viabilizar a implementa????o de reformas pr??-mercado no Brasil, na Argentina e no Uruguai em perspectiva comparada. Nesse sentido, o artigo aborda os temas da flexibilidade constitucional, da din??mica de forma????o das leis e da presen??a ou aus??ncia de revis??o judicial. A hip??tese subjacente a este artigo ?? a de que quanto mais r??gida a Constitui????o ??? vari??vel que envolve o poder de agenda e de veto dos cidad??os, do Executivo, do Legislativo e do Judici??rio ??? mais bem desenhado deve ser o jogo pol??tico para a viabiliza????o de implementa????o das reformas. Para exemplificar este artigo, foram analisadas as reformas previdenci??rias implantadas nos pa??ses em estudo.

Sistema de avalia????o e premia????o por resultados da Embrapa

O presente trabalho apresenta conceitos e aspectos operacionais do Sistema de Avalia????o e Premia????o por Resultados da Embrapa/SAPRE, implantado em 1996, cujo objetivo ?? o de elevar o desempenho das unidades de pesquisa, equipes e empregados da Empresa, recompensando os mais produtivos. O Sistema ?? constitu??do por 6 componentes: a) avalia????o de unidades; b) premia????o de unidades; c) avalia????o de equipes e empregados; d) premia????o de equipes e empregados; e) premia????o nacional de projetos e f) premia????o por excel??ncia. As unidades s??o avaliadas em conformidade a: a) cumprimento de metas; b) efici??ncia relativa; c) avalia????o de qualidade t??cnica; d) impacto s??cio-econ??mico; e) avalia????o de imagem. A conjuga????o desses fatores constitui o ??ndice de Desempenho Institucional de uma unidade, base para o c??lculo financeiro de sua premia????o. A avalia????o de equipes e empregados de cada unidade compreende o respectivo desempenho em: a) cumprimento de metas individuais; b) capta????o de recursos; c) criatividade em pesquisa e desenvolvimento (P&D); d) qualidade t??cnica dos projetos de pesquisa. Os empregados com melhor desempenho, individualmente e por equipes de trabalho, s??o premiados com um b??nus financeiro. Al??m disso, o SAPRE inclui a premia????o de projetos, que, no ??mbito nacional, se destacam em termos de criatividade, parceria, capta????o de recursos, qualidade t??cnica e melhoria de processos. Tamb??m s??o premiados com trof??us e diplomas os dois melhores empregados (um pesquisador e um de suporte ?? pesquisa) de cada unidade descentralizada e da sede como um todo.

Estudo sobre acetilação da isoniazida em pacientes com tuberculose pulmonar e da sua implicação na redução ou eliminação da carga bacilar no escarro

A N-acetiltransferase 2 é a principal enzima responsável pelo metabolismo e inativação da isoniazida no organismo humano. Mutações no gene NAT2 levam a 3 perfis genotípicos de acetilação que alteram os níveis séricos do fármaco: acetiladores lentos, intermediários e rápidos, o que pode alterar o desfecho terapêutico. O objetivo do estudo foi investigar se os diferentes perfis podem influenciar no tempo de negativação da cultura de escarro, e se existe correlação entre carga bacilar e gravidade da doença com tempo de conversão da cultura. A população de estudo foi composta por 62 pacientes, que tiveram seus DNAs sequenciados para identificação de mutações no gene NAT2 e seus perfis de acetilação determinados. A análise genotípica detectou 10 SNPs, sendo as mutações 341 T>C (39,65%) e 481 C>T (38,71%) as mais frequentes. A determinação das variantes alélicas identificou NAT2*5B (29,03%), NAT2*6A (23,39%) e NAT2*4 (24,19%) como os alelos mais frequentes e NAT2*5B/*5B como o genótipo mais frequente (20,4%). Dentre os 62 pacientes, foi possível correlacionar tempo de negativação da cultura e perfil de acetilação entre 43 deles, os quais 58,3% e 55,6% tiveram o genótipo lento com maior frequência no mês 1 e mês 3, respectivamente. Por meio de dados microbiológicos, a carga bacilar e a gravidade da doença também foram comparadas com o tempo de negativação, indicando que os pacientes com doença moderada ou avançada (76,7%) e aqueles com carga bacilar alta (60,4%), não tiveram associação estatística com o tempo de conversão da cultura. Por último, curvas de crescimento de isolados de M. tuberculosis de pacientes foram construídas para verificar possíveis diferenças na duração da fase lag entre os isolados, porém não foi observada diferença estatística entre elas. Com base nos resultados encontrados, verifica-se que não existe associação entre o perfil de acetilação do paciente, a carga bacilar, a gravidade da doença e o tempo de negativação da cultura de escarro

Avaliação do projecto - Formalização da consulta de enfermagem em pneumologia

Mestrado em Intervenção Sócio-Organizacional na Saúde - Área de especialização: Políticas de Administração e Gestão de Serviços de Saúde.

Agent-based simulation of electronic marketplaces with decision support

This paper presents a Multi-Agent Market simulator designed for analyzing agent market strategies based on a complete understanding of buyer and seller behaviors, preference models and pricing algorithms, considering user risk preferences and game theory for scenario analysis. The system includes agents that are capable of improving their performance with their own experience, by adapting to the market conditions, and capable of considering other agents reactions.

Swarm intelligence for scheduling: a review

Swarm Intelligence generally refers to a problem-solving ability that emerges from the interaction of simple information-processing units. The concept of Swarm suggests multiplicity, distribution, stochasticity, randomness, and messiness. The concept of Intelligence suggests that problem-solving approach is successful considering learning, creativity, cognition capabilities. This paper introduces some of the theoretical foundations, the biological motivation and fundamental aspects of swarm intelligence based optimization techniques such Particle Swarm Optimization (PSO), Ant Colony Optimization (ACO) and Artificial Bees Colony (ABC) algorithms for scheduling optimization.

Les Hipparion du Portugal

This paper is concerned with Hipparion from Ribatejo, Portugal, and with the stratigraphy of the Neogene series of this region. The first two chapters are an introduction and an historical review. Paleontological study includes both a revision of the specimens accounted by ROMAN (1907) and the description of new material. Two forms were recognized, an early H. cf. primigenium, lower Vallesian in age, NM 9 mammal unit (from Archino, Vila Nova da Rainha, Aveiras de Cima), and a more advanced H. primigenium cf. melendezi. Upper Vallesian, NM 10 (possibly lowermost Turolian, NM 11) (at Azambujeira and Marmeleira). A synthesis of Middle and Upper Miocene from Ribatejo is also presented. Levels with H. p. cf. melendezi are somewhat older than «Upper Pontian», as it was previously acknowledged, they attain at the best the lowermost Turolian (approximately corresponding to «Upper Pontian»). Even higher levels may be Turolian in age, though they are not yet accurately dated. Almost all the localities are shown (tableau 11) according to its stratigraphical position; age, correspondance to mammal units from NM 5 to NM 10 (and may be also from NM 11 to NM 12), and correlation with marine formations near Lisbon are also taken in account. The stratigraphical position of localities such as Póvoa de Santarém, Quinta do Marmelal, Pero Filho, Azambujeira (lower levels), and Fonte do Pinheiro was revised; the stratigraphical position of Marmeleira was ascertained. The localities so far known correspond to NM 5 (?), NM 6, NM 8, NM 9, NM 10 and possibly to NM II and NM 12. A new interpretation (M. T. ANTUNES) of localities with oysters from Ribatejo allows a better correlation with vertebrate localities. Relationships with Serravallian transgression seem well established. Only two localities, Vila Nova da Rainha and Foz do Alviela, may possibly be correlated to V-b division of Lisbon (Langhian) with «Hispanotherium fauna». All the other localities are younger than Serravallian oyster beds. Undirect correlation shows that NM 6 localities are somewhat younger than the apogee ef Serravallian transgression (corresponding approximately to Blow's N 11 to N 13 zones based on planctonic foraminifera).

Evolução paleogeográfica e paleobiogeográfica do Caloviano-Kimeridgiano do Algarve

The littoral and the «barrocal» of the Algarve correspond in part to a meso-cenozoic sedimentary basin with a deeping south monocline structure, cut by North-South faults and by two East-West longitudinal flexures. The lithostratigraphic and chronostratigraphic study of the Jurassic formations, undertaken during the last years, allow a better knowledge of the paleogeographic and paleobiogeographic evolution of these formations and particularly of the Callovian-Kimmeridgian. Lower Callovian facies, being similar from Sagres in the West to beyond Tavira, show the uniformity of the sedimentary conditions. Since Middle Callovian, the beginning of the regressive cycle is responsible for a major unconformity between Dogger and Malm. During the Lower Oxfordian a new sedimentary cycle begins with a transgression afecting the region south of the Albufeira-São Brás de Alportel-Tavira line thus originating a gulf centered in the Loulé area which rapidly diminishes since the Lower Kimmeridgian. The faunistic affinities are always tipically tethyan although some classic boreal fauna exist, in contrast with the Northern Tagus basin (where affinities are sub-boreal during the Callovian).