Chemical Exposures of Women Workers in the Plastics Industry with Particular Reference to Breast Cancer and Reproductive Hazards.

Despite concern about the harmful effects of substances contained in various
plastic consumer products, little attention has focused on the more heavily
exposed women working in the plastics industry. Through a review of the
toxicology, industrial hygiene, and epidemiology literatures in conjunction
with qualitative research, this article explores occupational exposures in producing
plastics and health risks to workers, particularly women, who make up
a large part of the workforce. The review demonstrates that workers are
exposed to chemicals that have been identified as mammary carcinogens and
endocrine disrupting chemicals, and that the work environment is heavily
contaminated with dust and fumes. Consequently, plastics workers have a
body burden that far exceeds that found in the general public.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.

Cement As a Waste Form for Nuclear Fission Products: The Case of 90Sr and Its Daughters

One of the main challenges faced by the nuclear industry is the long-term confinement of nuclear waste. Because it is inexpensive and easy to manufacture, cement is the material of choice to store large volumes of radioactive materials, in particular the low-level medium-lived fission products. It is therefore of utmost importance to assess the chemical and structural stability of cement containing radioactive species. Here, we use ab initio calculations based on density functional theory (DFT) to study the effects of ⁹⁰Sr insertion and decay in C-S-H (calcium-silicate-hydrate) in order to test the ability of cement to trap and hold this radioactive fission product and to investigate the consequences of its β-decay on the cement paste structure. We show that ⁹⁰Sr is stable when it substitutes the Ca²⁺ ions in C-S-H, and so is its daughter nucleus ⁹⁰Y after β-decay. Interestingly, ⁹⁰Zr, daughter of ⁹⁰Y and final product in the decay sequence, is found to be unstable compared to the bulk phase of the element at zero K but stable when compared to the solvated ion in water. Therefore, cement appears as a suitable waste form for ⁹⁰Sr storage.

Developing Food Products For Consumers on a Gluten Free Diet

There is a significant increase in people that choose to follow an avoidance diet, especially excluding gluten. Unlike previously, there is now a demand for ‘no compromise’ gluten-free cereal products that have the same properties as their wheat contain counterparts. This is very challenging for the bakers and the cereal technologists due to the functional role of the gluten network in some of these products. Numerous combinations of raw materials form natural sources have been studied and critically evaluated in this review. Most of the gluten-free products are made of native and modified starches blended with different hydrocolloids due to their structure-building and water binding properties. These ingredients are added to a gluten-free flour, such as rice and corn. The legislation framework, formulations for manufacturing of highl nutritional value bread, pasta and cakes/biscuits as well as quality assurance aspects for the gluten-free manufacturers are discussed in this review.

Strategic management in the Telecom industry to create competitive advantage

O presente trabalho teve por objetivos a identificação de uma estratégia e o desenvolvimento de um modelo que permita às operadoras de telecomunicações a sua sustentabilidade, bem como a identificação de caminhos para a adaptação a uma realidade sempre em mudança como é a da indústria das telecomunicações. Numa primeira parte do trabalho elaborou-se uma revisão de literatura do atual estado da arte das principais estratégias relevantes e com aplicação à indústria de telecomunicações. A pesquisa realizada investigou a estrutura atual da indústria de telecomunicações e o estado da competitividade das operadoras de telecomunicações. Dos resultados desta foi possível constatar uma evolução constante da tecnologia e dos modelos de negócio neste ecossistema, assim como a presença de uma pressão concorrencial significativa exercida sobre as operadoras, quer por parte das empresas já existentes no mercado quer por parte das emergentes. As operadoras têm de transformar o seu modelo de rede e de negócios para se adaptarem às mudanças e às tendências da indústria e do mercado. Com base na revisão de literatura, elegeu-se a metodologia baseada num inquérito de pesquisa empírica para aferir o estado da indústria e derivar as estratégias possíveis. Este inquérito foi efetuado a especialistas da área de telecomunicações de diferentes subsectores e países para abordar todos os elementos estratégicos do modelo de negócio futuro. Os resultados da pesquisa revelaram que as empresas que operam no mercado da Internet (Over The Top - OTT) representam a maior ameaça sobre o futuro dos operadores de telecomunicações. Os operadores só vão conseguir responder através da modernização de sua rede, melhorando a qualidade, reduzindo o custo global, e investindo em produtos inovadores e diferenciados e em serviços. Os resultados do inquérito revelam-se de acordo com os pressupostos da Blue Ocean Strategy. A aplicabilidade da Blue Ocean Strategy foi aprofundada permitindo concluir que o valor inovador obtido simultaneamente através da redução de custos e da diferenciação permitem aumentar as vantagens dos operadores existentes em termos das infra-estruturas físicas detidas e das relações estabelecidas com os clientes. O caso particular da fibra óptica até casa (FTTH) foi considerado como aplicação da Blue Ocean Strategy a uma nova tecnologia que as operadoras podem implementar para criar novas soluções e abrir segmentos de mercado inexplorados. Os resultados do inquérito e da investigação realizada à aplicação da Blue Ocean Strategy foram combinados para propor um novo modelo de negócio para as operadoras de telecomunicações que lhes permite, não só responder aos desafios existentes, mas, também, ter uma melhor posição competitiva no futuro. Foi, ainda, realizado um estudo de caso que destacou como a Verizon Communications foi capaz de transformar a sua rede e o modelo de negócio em resposta ao aumento da pressão competitiva. Através do valor da inovação transferida aos seus clientes, a Verizon foi capaz de aumentar significativamente as suas receitas e satisfação do cliente.

A value chain analysis of tuna industry in Ghana

Every can of tuna purchased by the consumer has taken a long journey before reaching the supermarket shelves. For each can bought there is a lengthy process from sea to shelf. A large proportion of the tuna cans purchased in the European Union come all the way from West Africa; a developing region with a high dependency on fisheries. Amidst an ever-increasing demand for tuna products the global tuna fisheries are set to continue expanding, apparently one of the last natural resource based industries fit to do so in West Africa. Tuna is the biggest fisheries export and dominates the fisheries sector in Ghana, a country situated in West Africa. This thesis aims to understand how this globally important industrial fisheries functions in terms of procedures, practices, Governance and finance. Socioeconomic influences, in the setting of a developing country, were also examined. For these purposes a Value Chain Analysis was employed. A Value Chain Analysis is a tool commonly used to understand how different companies and organizations participate in a domestic policy environment, which directs conclusion in the global economy. This analysis has the potential to allow researchers to fully understand a commodity chain and hence identify realistic opportunities for consequential improvements. Interviews and questionnaires were employed in-field Ghana along with secondary data collection techniques. It was found that the fisheries functions at the production level under influences from large multinational companies and tends to operate with a certain degree of lawlessness. Governance over the value chain is well defined, however implementation is poor or non-existent. The processors, whom are also dominated by multinationals, exert some control over the producers and their sales, however the high value links which are highlighted occur at the retail stage. Socioeconomic dynamics acting in the chain included the lack of communication between the public and private sector, power imbalances amongst players at production, the role of local businesswomen as actors in the chain and the general characteristics of the workers in the industry. Value addition and upgrading are needed the most in Governance over the chain, especially within Monitoring, Control and Surveillance. The results of the study provide a wealth of material about the components of a cost-heavy fishing industry in a developing country; an industry on which many eyes have recently turned due to illegal fishing activities. It highlights clearly where funding and future focus are needed. This value chain can be used as a guide for those that need to comprehend the financial complexities and real life dynamics of the Ghanaian tuna fishing industry today.

Serving More Segments and Offering More Products: What Are the Costs and Where Are the Profits?

Making more money involves more than targeting new customer segments and offering new services.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Metabolic and morphogenetic engineering of Bacillus subtilis: biotechnology for industry

Dissertation presented to obtain the Ph.D. degree in “Biology” at the Institute of Chemical and Biological Technology of the New University of Lisbon

Strategy of Logoplaste in Mozambique's flexible plastic packaging industry

Logoplaste is a specialist in operating in-house industrial sites for manufacturing rigid plastic packaging containers. In developing countries, especially in Africa, the low income of consumers does not allow a widespread adoption of products typically sold in rigid plastic containers. In these countries the flexible packages are usually adopted as they allow for better ratios of cost/litter of product, particularly in smaller packages. Should Logoplaste offer this type of technology in order to expand into developing countries?

Return on assets in the Tobacco Industry analysis of the four main Tobacco Manufacturers

This paper studies operating profitability drivers in the Four Main Tobacco Manufacturers for the period 2004-2014. The operating profitability is analyzed as return on assets (ROA) based on the DuPont Extended Model breakdown in degree of operational risk, gross sales margin and assets turnover. The sources of ROA are market share and price strategies appraised through the drivers: firm-size, global value and strategic choices. Using consolidated data, results suggest that firm-size and global value holds a positive relationship with ROA. Also innovation through less harmful tobacco products can lead to better ROA despite no correlation between R&D and ROA.

The consumption of beauty products on famale young adults in Portugal. Recommenrations for the brand Lancôme to improve its store trafic

This project aims to explore the Portuguese Beauty and Cosmetics market, and to discuss the usage and purchase behaviour of young female adults, between 18 and 26 years old. After a market analysis based on secondary data, it evaluates the results of qualitative and quantitative research based on 9 interviews and 126 online questionnaires to explore the consumers’ reasoning when choosing products from this category – fragrances, skin care or make-up – as well as their attitude towards brands, with a special focus on the premium cosmetics brand Lancôme. Contrary to our expectations there was no statistically significant positive influence of the online touchpoints within this age segment’s purchase intention. However, results indicate that Lancôme is already being perceived by some as young and modern, but is still suffering the threat of Mass Market brands that are valued by this target, mainly due to a price sensitivity towards premium beauty brands.

Zoning of the commercial poultry industry in Ontario as a method of avian influenza mitigation

L’Organisation mondiale de la santé animale (OIE) est l’institution internationale responsable de la mise en place des mesures sanitaires associées aux échanges commerciaux d’animaux vivants. Le zonage est une méthode de contrôle recommandée par l’OIE pour certaines maladies infectieuses, dont l’influenza aviaire. Les éclosions d’influenza aviaire été extrêmement coûteuses pour l’industrie avicole partout dans le monde. Afin d’évaluer la possibilité d’user de cette approche en Ontario, les données sur les sites de production avicole ont été fournies par les fédérations d’éleveurs de volailles ce cette province. L’information portant sur les industries associées à la production avicole, soit les meuneries, les abattoirs, les couvoirs, et les usines de classification d’œufs, a été obtenue par l’entremise de plusieurs sources, dont des représentants de l’industrie avicole. Des diagrammes de flux a été crée afin de comprendre les interactions entre les sites de production et les industries associées à ceux-ci. Ces industries constituaient les éléments de bas nécessaires au zonage. Cette analyse a permis de créer une base de données portant sur intrants et extrants de production pour chaque site d’élevage avicole, ainsi que pour les sites de production des industries associées à l’aviculture. À l’aide du logiciel ArcGIS, cette information a été fusionnée à des données géospatiales de Statistique Canada de l’Ontario et du Québec. La base de données résultante a permis de réaliser les essais de zonage. Soixante-douze essais ont été réalisés. Quatre ont été retenus car celles minimisaient de façon similaire les pertes de production de l’industrie. Ces essais montrent que la méthode utilisée pour l’étude du zonage peut démontrer les déficits et les surplus de production de l’industrie avicole commerciale en Ontario. Ceux-ci pourront servir de point de départ lors des discussions des intervenants de l’industrie avicole, étant donné que la coopération et la communication sont essentielles au succès du zonage.

STUDIES ON THE QUALITY AND PROCESS CONTROL FACTORS DURING THE PRODUCTION AND STORAGE OF SALTED DRIED FISH PRODUCTS

In this study the quality and process control factors during the production and storage of salted dried fish products. The study reveals that quantity of dry fish production in the state is decreasing and dry fish processing industry should be encouraged by central and state governments. The dry and wet salting may be carried out to a period of 4 to 8 hours respectively and time may depend on temperature, size, and concentration of medium. Demand is an unavoidable factor for sale of fish. The packed dry salted lots kept at room temperature are useful only for 20 days. The refrigerator- stored lots had more storage life and nutritional content are good up to 3 months. The cold storage stored dry salted lot had more storage life than the wet salted lot. The use of preservatives in salting is encouraged to reduce pH. The low temperature preservation maintains the nutritional value and quality for long period. It further encourages the labeling of nutritional value of dry fish as in tinned products.

Science and technology of rubber reclamation with special attention to NR-based waste latex products

A comprehensive overview of reclamation of cured rubber with special emphasis on latex reclamation is depicted in this paper. The latex industry has expanded over the years to meet the world demands for gloves, condoms, latex thread, etc. Due to the strict specifications for the products and the unstable nature of the latex as high as 15% of the final latex products are rejected. As waste latex rubber (WLR) represents a source of high-quality rubber hydrocarbon, it is a potential candidate for generating reclaimed rubber of superior quality. The role of the different components in the reclamation recipe is explained and the reaction mechanism and chemistry during reclamation are discussed in detail. Different types of reclaiming processes are described with special reference to processes, which selectively cleave the cross links in the vulcanized rubber. The state-of-the-art techniques of reclamation with special attention on latex treatment are reviewed. An overview of the latest development concerning the fundamental studies in the field of rubber recycling by means of low-molecular weight compounds is described. A mathematical model description of main-chain and crosslink scission during devulcanization of a rubber vulcanizate is also given.